600-1-PLP-R Price, Distributor, Stock

Key Specifications, Connector Series 1: BNC Twinax, Connector Gender 1: Plug, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 78 Ohm, Connector Series 2: BNC Twinax, Connector Gender 2: Plug, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 78 Ohm, RF Cable Part Number: RG108A/U, RF Cable Type: RG108, RF Cable Impedance: 78 Ohm, Length: 600 inches. BNC Twinax Plug to BNC Twinax Plug Cable 600 Inch Length Using 78 Ohm RG108 Coax, RoHS., Radio frequency assembly BNC twinax plug to BNC twinax plug cable 600 inch length using 78 Ohm RG108 coax, RoHS from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. BNC twinax plug to BNC twinax plug cable 600 inch length using 78 Ohm RG108 coax, RoHS, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom BNC twinax to BNC twinax cable assembly orders will ship same day as well. Pasternack RF twinax cable assembly is built with BNC twinax cable connection on one end and BNC twinax cable connection on the other. Our BNC twinax to BNC twinax cable assemblies have a plug gender on end 1 and plug on end 2. This BNC twinax to BNC twinax cable is a plug to plug twinax assembly, PE3480LF-600, can also be known as a BNC twinax male to BNC twinax male cable assembly and will be shipped same-day as it is purchased. BNC twinax male to BNC twinax male cable assembly PE3480LF-600 is built with RG108 which is a flexible twinax type. The Pasternack flexible BNC Twinax cable assembly is manufactured with BNC twinax to BNC twinax cable connectors, has a 78 Ohm impedance and is single shielded. RF specs on this BNC twinax plug to BNC twinax plug cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. BNC twinax male to BNC twinax male cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality BNC twinax to BNC twinax cable assembly for quick shipment worldwide. Variations of BNC twinax cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this BNC twinax plug to BNC twinax plug cable 600 inch length using 78 Ohm RG108 coax, RoHS.

1 : $385.99
25 : $366.69
50 : $347.39

628

TC-600-NMH-X

Pasternack Enterprises

Key Specifications, Polarity: Standard, Connector Series: N, Connector Gender: Male, Impedance: 50 Ohm, Body Style: Straight, Attachment Method: Crimp/Solder, Mount Method: None, Minimum Frequency: DC, Maximum Frequency: 6 GHz, Interface Type 1: LMR-600, Interface Type 2: PE-C600. N Male Connector Crimp/Solder Attachment For LMR-600, PE-C600. TC-600-NMH-X type N male coaxial connector has an interface type of LMR-600, PE-C600 and a 50 Ohm impedance. Pasternack type N male connector uses shield/contact crimp/solder as an attachment method. Our male type N coaxial connector provides a minimum frequency of DC and a maximum frequency of 6 GHz. The Pasternack N type male coaxial connector has a PTFE dielectric type and a VSWR of 1.25. The Pasternack N type coaxial connector has a brass body with tri-metal plating. Our TC-600-NMH-X N type connector uses brass contact. This type N male coaxial RF connector is RoHS and REACH compliant. This Pasternack male N type connector will ship the same day as purchased. Our type N male connector is part of over 40,000 RF, microwave and millimeter wave components in stock for worldwide shipment. We also build custom type N connector cable assemblies that will ship the same day as well, *LMR™ is a Trademark of Times Microwave.

1 : $26.66

442

PE3W11600-36

Pasternack Enterprises

Key Specifications, Connector 1 Series: TNC, Connector 1 Gender: Female, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector Mount Method 1: Bulkhead, Connector 1 Impedance: 50 Ohm, Connector 2 Series: N, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: RG141A/U, RF Cable Type: RG141, RF Cable Impedance: 50 Ohm, Length, Max: 36 inches. TNC Female Bulkhead to N Male Cable 36 Inch Length Using RG141 Coax., Radio frequency assembly TNC female bulkhead to N male cable 36 inch length using RG141 coax from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. The TNC female bulkhead to N male cable 36 inch length using RG141 coax, TNC cable like our other Pasternack coaxial cable assemblies, will ship the same day and any custom TNC to type N cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with TNC bulkhead cable connection on one end and N type cable connection on the other. Our TNC to type N cable assemblies have a female gender on end 1 and male on end 2. PE3W11600-36 can also be known as a TNC jack to type N plug cable assembly and will be shipped same-day as it is purchased. TNC jack to type N plug cable assembly PE3W11600-36 is built with RG141 which is a flexible coax type. The Pasternack flexible TNC cable assembly is manufactured with TNC to N type cable connectors, has a 50 Ohm impedance and is single shielded. RF specs on this 3 GHz maximum frequency TNC female bulkhead to type N male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3W11600-36 can also be used in the other direction and will be N type male to TNC female bulkhead cable assembly if the opposite connectivity is required. TNC jack bulkhead to type N plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality TNC to type N cable assembly for quick shipment worldwide. Variations of TNC cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this TNC female bulkhead to N male cable 36 inch length using RG141 coax.

1 : $129.99
25 : $123.49
50 : $116.99
100 : $111.79

197

PE46000

Pasternack Enterprises

Key Specifications, Connector Series: MCX, Connector Gender: Female, Impedance: 50 Ohm, Body Style: 45 Degree, Mount Method: PCB, Minimum Frequency: DC, Maximum Frequency: 6 GHz. MCX Female PCB Mount Connector, 45 Degree angle with round contact 0.0375 inches diameter, 6GHz VSWR1.2. PE46000 MCX female 45 degree PCB RF connector has an impedance of 50 Ohm. Our female MCX 45 degree connector provides a maximum frequency of 6 GHz. This MCX female RF connector is stocked to be readily available for same business day shipment. The Pasternack 45 degree MCX female PCB connector has a teflon dielectric type and a VSWR of 1.2:1. Pasternack's MCX connector has a brass body with gold over nickel over copper plating. Our PE46000 MCX 45 degree connector uses agold over nickel over copper-plated beryllium copper contact. Additional RF connector specs and dimensions for this component can be found on its PDF specification datasheet and CAD drawings above. The radio frequency connector is made from brass material and has a contact life of 500 cycles or more. The PE46000 MCX PCB connector operates at a temperature range of -55 to 155 deg C. The Pasternack MCX female connector has a dielectric withstanding voltage of 750 Vrms. This Pasternack 45 degree female MCX PCB connector will ship the same business day as purchased. Our PCB MCX 45 degree female connector is part of RF, microwave and millimeter wave components in stock for local, domestic, and international shipment. For further information on similar products, our expert technical support and trained sales team can get you the ideal RF connector as per your requirements.

1 : $54.99
25 : $52.24
50 : $49.49
100 : $47.29

PE3TC1204-600CM

Pasternack Enterprises

1 : $249.99
25 : $237.49
50 : $224.99
100 : $214.99

PE3W16007

Pasternack Enterprises

Key Specifications, Connector Series 1: MHV, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: SHV, Connector Gender 2: Jack, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: LMR-195, RF Cable Type: LMR-195, RF Cable Impedance: 50 Ohm. MHV Male to SHV Jack Cable Using LMR-195 Coax. PE3W16007 is a MHV male to SHV jack cable using LMR-195 coax. This Pasternack MHV male to SHV jack cable assembly uses a 50 Ohm MHV for connector 1 and a 50 Ohm SHV for connector 2. Our male MHV to jack SHV cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE3W16007 MHV male to SHV jack cable assembly is constructed with LMR-195 coax, * LMR™ is a trademark of Times Microwave Systems.

PE3W17600

Pasternack Enterprises

Key Specifications, Connector Series 1: N, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: BNC, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Right Angle, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: LMR-200, RF Cable Type: LMR-200, RF Cable Impedance: 50 Ohm. N Male to BNC Male Right Angle Cable Using LMR-200 Coax. PE3W17600 is a N male to BNC male right angle cable using LMR-200 coax. This Pasternack N male to BNC male right angle cable assembly uses a 50 Ohm N for connector 1 and a 50 Ohm BNC for connector 2. N to BNC right angle coaxial cable assembly uses 90 degree right angle coax cable connector. Our male N to male BNC right angle cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE3W17600 N male to BNC male right angle cable assembly is constructed with LMR-200 coax, * LMR™ is a trademark of Times Microwave Systems.

PE80T6002

Pasternack Enterprises

Key Specifications, Type: Tunnel Diode, Detector Polarity: Negative, Connector In Series: SMA, Connector In Gender: Male, Connector Out Series: SMA, Connector Out Gender: Female, Minimum Frequency: 100 MHz, Maximum Frequency: 4 GHz, Connector In Impedance: 50 Ohm. Tunnel Diode Detector, SMA, 5 nsec Pulse Risetime, Negative Video Out, +17 dBm max Pin, 100 MHz to 4 GHz. Pasternack tunnel diode detector PE80T6002 is part of our extensive in-stock RF, microwave and millimeter wave components available for purchase. This tunnel diode detector is manufactured with SMA male to SMA female connectors. Our SMA tunnel diode detector has a minimum frequency of 100 MHz and a maximum frequency of 4 GHz. This SMA coaxial RF detector has a maximum input power of 17 dBm and a video capacitance of 0 pF. PE80T6002 coaxial SMA detector is one of over 40,000 RF, microwave and millimeter wave components supplied by Pasternack. Our tunnel diode detector can be bought and shipped worldwide the same-day as with Pasternack's other in-stock RF parts.

1 : $875.0
5 : $840.0
10 : $805.0

PEWGS6003

Pasternack Enterprises

Key Specifications, Waveguide Size: WR-28, Flange Size Flange Type Flange Group: UG-599/U Square Cover Grooved Flange, Frequency Band: Ka band, Minimum Frequency: 26.5 GHz, Maximum Frequency: 40 GHz, Impedance: 50 Ohms, Maximum VSWR: 1.15:1, Switch Design: SPDT DPDT, Switching Action: Break Before Make, Actuator Type: Latching Actuator, Additional Actuator Feature 1: TTL Logic, Additional Actuator Feature 2: Self Cut Off, Additional Actuator Feature 3: Window Indicator, Additional Actuator Feature 4: Manual Override. WR-28 Waveguide Electromechanical Relay SPDT/DPDT Latching Switch, Ka Band 40 GHz, 550 Watts, UG-599/U Square Cover, 12V, TTL Logic., WR28 waveguide electromechanical relay switch PEWGS6003 is part of Pasternack’s international ISO 9001:2008 certified facility same-day shipping program. Manufactured as SPDT and interchangeable DPDT settings, WR28 electromechanical waveguides are relay switches with latching actuators. Pasternack innovative SPDT/DPDT WR28 chem film-plated electromechanical switches are always in stock and have a 550 Watt maximum input power rating with a 13.3 KW peak power rating. 550 watts latching aluminum waveguide relay switch PEWGS6003 can operate in the ultra-wide Ka band frequency range of 26.5 GHz to 40 GHz. 40 GHz max WR28 550 watt waveguide electromechanical relay switch that has a typical actuating voltage of 12V is sold by Pasternack who has been in business since 1972. Electromechanical relay 12V 550 W max power Ka band waveguide has high UG-599/U Square Cover grooved flanges ports. These WR28 40 GHz aluminum body waveguide relay switches plated in chem film produce a maximum actuating current of 471 mA at a 12 V nominal operating voltage. 471 mA 550 W waveguide electromechanical latching relay switch PEWGS6003 by Pasternack has an operating range of 10 V to 20 V. The patented motor drive housings for PEWGS6003 Ka band electromechanical relay switches at 12 V with manual override control ttl-logic latching actuators support a removable cover for window indicator and a self cut off for the position indicator. Our 550 W max input power 10 V to 20 V waveguide relay switch PEWGS6003 with UG-599/U Square Cover flanges has an impressive impedance of 50 Ohms. Pasternack WR28 SPDT/DPDT waveguide relay switch that requires a +12 Vdc nominal bias voltage has a -40°C to 85°C operating temperature range. 40 GHz aluminum waveguide electromechanical relay switch with 50 Ohms impedance can function under 30psig maximum operating pressure and is fitted with a fully weatherized package of 0-100% humidity. PEWGS6003 Electromechanical WR28 latching waveguide switch by Pasternack is a tough aluminum waveguide component that has 250,000k cycles minimum of cold switching mechanical life. Ka band Pasternack SPDT/DPDT Square Cover UG-599/U flanged waveguide relay switch with 1.029 lbs of weight, is 2.11 in. wide, 3.9 in. long, and 2.11 in. high. WR28 12 Vdc 471 mA 26.5 GHz to 40 GHz electromechanical relay switch with maximum 1.15:1 VSWR (voltage standing wave ratio) has Pasternack’s expert technical support always at hand. CAD drawings with dimensions and specs on a downloadable PEWGS6003 PDF datasheet are available on the product page for this WR28 550 W 40 GHz waveguide electromechanical relay switch with Square Cover UG-599/U flanges. Industry-leading electromechanical polarity Ka band latching waveguide that can function under 30psig and temperatures up to 85°C, ships to anywhere globally available the same day. Pasternack’s 1.15:1 VSWR WR28 waveguide relay actuating switch has a quick-connect circular dc connector with mate providing 0.15 dB maximum insertion loss and in-stock consistently for your convenience. Electronic warfare and countermeasures, microwave radio, VSAT, space systems, are just a few of the important applications that these Pasternack PEWGS6003 550 kW WR28 40 GHz Ka band waveguides chem films are used in. Ordering is easy, just go online or call our knowledgeable sales team by phone and get this WR28 SPDT/DPDT latching switch with 0.15 dB insertion loss and 55 dB of minimum isolation. To summarize, the quality and availability of Pasternack WR28 break before make waveguide electromechanical latching relay switch with 61,000,000 ns typical switching speed.

1 : $5,000.0
5 : $4,800.0
10 : $4,600.0

TMC-EZ-600-716M-X

Pasternack Enterprises

PE3W13600

Pasternack Enterprises

Key Specifications, Connector Series 1: SMA, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Right Angle, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: SMA, Connector Gender 2: Female, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: RG174A/U, RF Cable Type: RG174, RF Cable Impedance: 50 Ohm. SMA Male Right Angle to SMA Female Cable Using RG174 Coax. PE3W13600 is a SMA male right angle to SMA female cable using RG174 coax. This Pasternack SMA male right angle to SMA female cable assembly uses a 50 Ohm SMA for connector 1 and a 50 Ohm SMA for connector 2. SMA right angle to SMA coaxial cable assembly uses 90 degree right angle coax cable connector. Our male SMA right angle to female SMA cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE3W13600 SMA male right angle to SMA female cable assembly is constructed with RG174 coax.

PE3062LF-600

Pasternack Enterprises

RoHS : Compliant

1 : $845.0
25 : $802.75
50 : $760.5
100 : $726.7

PE37600

Pasternack Enterprises

Key Specifications, Connector Series 1: 7/16 DIN, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50, Connector Series 2: 7/16 DIN, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Right Angle, Connector Mount Method 2: None, Connector Impedance 2: 50, RF Cable Part Number: RG217/U, RF Cable Type: RG217, RF Cable Impedance: 50. 7/16 DIN Male to 7/16 DIN Male Right Angle Cable Using RG217 Coax. PE37600 is a 7/16 DIN male to 7/16 DIN male right angle cable using RG217 coax. This Pasternack 7/16 DIN male to 7/16 DIN male right angle cable assembly uses a 50 Ohm 7/16 DIN for connector 1 and a 50 Ohm 7/16 DIN for connector 2. 7/16 DIN to 7/16 DIN right angle coaxial cable assembly uses 90 degree right angle coax cable connector. Our male 7/16 DIN to male 7/16 DIN right angle cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE37600 7/16 DIN male to 7/16 DIN male right angle cable assembly is constructed with RG217 coax.

PE315-600CM

Pasternack Enterprises

1 : $8,280.0
25 : $7,866.0
50 : $7,452.0
100 : $7,120.8

PE37600LF-144

Pasternack Enterprises

Key Specifications, Connector 1 Series: 7/16 DIN, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: 7/16 DIN, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Right Angle, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: RG217/U, RF Cable Type: RG217, RF Cable Impedance: 50 Ohm, Length, Max: 144 inches. 7/16 DIN Male to 7/16 DIN Male Right Angle Cable 144 Inch Length Using RG217 Coax, LF Solder., Radio frequency assembly 7/16 DIN male to 7/16 DIN male right angle cable 144 inch length using RG217 coax, LF solder from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. The 7/16 DIN male to 7/16 DIN male right angle cable 144 inch length using RG217 coax, LF solder, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom 7/16 DIN to 7/16 DIN cable assembly orders will ship same business day as well. Pasternack RF coax cable assembly is built with 7/16 DIN cable connection on one end and right angle 7/16 DIN cable connection on the other. Our 7/16 DIN to right angle 7/16 DIN cable assembly has male gender on end 1 and male on end 2. PE37600LF-144 can also be known as a 7/16 DIN plug to right angle 7/16 DIN plug cable assembly and will be shipped same-day as it is purchased. This RF cable assembly with 0.5 inches diameter has copper as cable inner conducting material and PE dielectric type. 7/16 DIN plug to 7/16 DIN plug cable assembly PE37600LF-144 is built with RG217 which is a flexible coax type. The Pasternack flexible 7/16 DIN cable assembly is manufactured with 7/16 DIN to right angle 7/16 DIN cable connectors, has a 50 Ohm impedance and is double shielded. Both the connectors have a clamp/solder attachment method and a brass body with nickel plating. Additional dimensions, specifications and CAD drawings for this PE37600LF-144 RF cable are available on our downloadable PDF datasheet.PE37600LF-144 can also be used in the other direction and will be right angle 7/16 DIN male to 7/16 DIN male cable assembly if the opposite connectivity is required. 7/16 DIN plug to 7/16 DIN right angle plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality 7/16 DIN to 7/16 DIN cable assembly for quick shipment worldwide. Variations of 7/16 DIN cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured.For further information on similar products, our expert technical support and trained sales team can get you the ideal 7/16 DIN RF cable assembly as per your requirements.

1 : $725.0
25 : $688.75
50 : $652.5
100 : $623.5

TE Connectivity

680326-000

TE Connectivity

D-609-06 Splice Type: Butt Splice Wire Size: 26 – 20 AWG Wire Size: .15 – .61 mm² Wire Size: 304 – 1216 CMA Insulation Option: Uninsulated Butt Splice 26 – 20 AWG .15 – .61 mm² 304 – 1216 CMA | Electrical Wire Splice | Part Number: 680326-000 | Internal Number: 680326-000 | Alias Number: 5-1195350-8 | TE Connectivity
RoHS : Compliant

1 : $2.42

20,323

BMC-Q1EY0600H

TE Connectivity

BMC-Q 0402 600R 25% Tol. High Current Impedance: 600 Ω Current Rating (Max): 200 mA DC Resistance: .7 Ω Package Size Code: 0402 Product Length: .039 in Automotive Grade Multilayer Chip Bead | 600 Ω 200 mA .7 Ω 0402 | Part Number: BMC-Q1EY0600H | Internal Number: 2-2176742-3 | TE Connectivity
RoHS : Compliant

10,000 : $0.05
5,000 : $0.06
2,500 : $0.06
1,000 : $0.06
500 : $0.06
250 : $0.06
100 : $0.06
50 : $0.06
25 : $0.06
10 : $0.06
1 : $0.07

19,980

BMC-Q1JY0600H

TE Connectivity

BMC-Q 0603 600R 25% Tol. High Current Impedance: 600 Ω Current Rating (Max): 1000 mA DC Resistance: .3 Ω Package Size Code: 0603 Product Length: .062 in Automotive Grade Multilayer Chip Bead | 600 Ω 1000 mA .3 Ω 0603 | Part Number: BMC-Q1JY0600H | Internal Number: 2-2176743-2 | TE Connectivity
RoHS : Compliant

5,000 : $0.16
2,500 : $0.16
1,000 : $0.16
500 : $0.17
250 : $0.17
100 : $0.18
50 : $0.18
25 : $0.18
10 : $0.19
1 : $0.19

7,682

BMC-Q2AY0600H

TE Connectivity

BMC-Q 0805 600R 25% Tol. High Current Impedance: 600 Ω Current Rating (Max): 1500 mA DC Resistance: .25 Ω Package Size Code: 0805 Product Length: .078 in Automotive Grade Multilayer Chip Bead | 600 Ω 1500 mA .25 Ω 0805 | Part Number: BMC-Q2AY0600H | Internal Number: 2-2176744-2 | TE Connectivity
RoHS : Compliant

5,000 : $0.22
2,500 : $0.22
1,000 : $0.23
500 : $0.23
250 : $0.24
100 : $0.24
50 : $0.25
25 : $0.26
10 : $0.26
1 : $0.27

4,838

2213600-3

TE Connectivity

COOLSPLICE LW 14/16 TO 16/18 AWG, SEAL Splice Type: Butt Splice Wire Size: 14 – 16 AWG 16 – 18 AWG Wire Size: 1.5 – .75 mm² 2.5 – 1.5 mm² Insulation Option: Fully Insulated Sealable: Yes Butt Splice 14 – 16 AWG 1.5 – .75 mm² | Coolsplice Quick Connect Splice | Part Number: 2213600-3 | Internal Number: 2213600-3 | TE Connectivity
RoHS : Compliant

1,000 : $3.47
500 : $3.57
250 : $3.68
100 : $3.78
50 : $3.89
25 : $3.99
10 : $4.1
1 : $4.2

1,475

216000-2

TE Connectivity

6P. TOOLLESS MOD J. Port Matrix Configuration: 1 x 1 Port Configuration: Single Port Modular Jack & Plug Interface Type: RJ11 / RJ14 / RJ25 Connector Profile: Standard Modular Jacks & Plugs Products: Combo Jacks Combo Jack | 1 x 1 Single Port RJ11 / RJ14 / RJ25 Standard | Part Number: 216000-2 | Internal Number: 216000-2 | TE Connectivity
RoHS : Compliant

1,000 : $3.57
500 : $3.67
250 : $3.78
100 : $3.91
50 : $4.02
1 : $4.41

666

2-1586000-4

TE Connectivity

24P FH PLUG VAL-U-LOK V2 Number of Positions: 24 Connector & Housing Type: Plug Connector Product Type: Housing Termination Method to Wire & Cable: Crimp Connector System: Wire-to-Wire Standard Rectangular Connector | 24 Plug Housing Crimp | Part Number: 2-1586000-4 | Internal Number: 2-1586000-4 | TE Connectivity
RoHS : Compliant

1,000 : $0.35
100 : $0.47
25 : $0.55
10 : $0.62
1 : $0.69

244

CJP600J15RJ

TE Connectivity

CJP 600W 15R 5% Lead Resistance Value: 15 Ω Element Type: Wire Wound Passive Component Tolerance: 5 % Resistor Type: Power Resistor Resistance Class: Up to 1kΩ Chassis Mount Resistor | 15 Ω Wire Wound 5 % Power Resistor | Part Number: CJP600J15RJ | Internal Number: 1-2176511-3 | TE Connectivity
RoHS : Compliant

1 : $186.47

BEDC106NN00001216000

TE Connectivity

923 RECEPTACLE, ANGLED, ROTATABLE Connector System: Cable-to-Panel Circular Connector Type: Circular Connector Receptacle Number of Positions: 6 Circular Connector Shell Size: 23 Sealable: No Cable-to-Panel Circular Connector Receptacle 6 23 | Standard Circular Connector | Part Number: BEDC106NN00001216000 | Internal Number: BGC106N00001216000 | TE Connectivity
RoHS : Compliant

25 : $30.19
10 : $32.53
1 : $34.85

CJP600J1K2J

TE Connectivity

CJP 600W 1K2 5% Lead Resistance Value: 1.2K Ω Element Type: Wire Wound Passive Component Tolerance: 5 % Resistor Type: Power Resistor Resistance Class: 1kΩ – 1MΩ Chassis Mount Resistor | 1.2K Ω Wire Wound 5 % Power Resistor | Part Number: CJP600J1K2J | Internal Number: 3-2176511-6 | TE Connectivity
RoHS : Compliant

1 : $186.47

CJP600J680RJ

TE Connectivity

CJP 600W 680R 5% Lead Resistance Value: 680 Ω Element Type: Wire Wound Passive Component Tolerance: 5 % Resistor Type: Power Resistor Resistance Class: Up to 1kΩ Chassis Mount Resistor | 680 Ω Wire Wound 5 % Power Resistor | Part Number: CJP600J680RJ | Internal Number: 3-2176511-3 | TE Connectivity
RoHS : Compliant

1 : $186.47

CJP600J12RJ

TE Connectivity

CJP 600W 12R 5% Lead Resistance Value: 12 Ω Element Type: Wire Wound Passive Component Tolerance: 5 % Resistor Type: Power Resistor Resistance Class: Up to 1kΩ Chassis Mount Resistor | 12 Ω Wire Wound 5 % Power Resistor | Part Number: CJP600J12RJ | Internal Number: 1-2176511-2 | TE Connectivity
RoHS : Compliant

1 : $186.47

CJP600J470RJ

TE Connectivity

CJP 600W 470R 5% Lead Resistance Value: 470 Ω Element Type: Wire Wound Passive Component Tolerance: 5 % Resistor Type: Power Resistor Resistance Class: Up to 1kΩ Chassis Mount Resistor | 470 Ω Wire Wound 5 % Power Resistor | Part Number: CJP600J470RJ | Internal Number: 3-2176511-1 | TE Connectivity
RoHS : Compliant

1 : $186.47

132-0116-0002

TE Connectivity

132-0116-0002 RF Interface: SMB RF Connector Style: Plug RF Connector Mated Outer Diameter (Approximate): .187 in RF Connector Mated Outer Diameter (Approximate): 4.75 mm Impedance: 50 Ω SMB Plug .187" 4.75 mm | Coax Connector | Part Number: 132-0116-0002 | Internal Number: 1467950-1 | TE Connectivity
RoHS : Compliant

1 : $128.3

CJP600J22RJ

TE Connectivity

CJP 600W 22R 5% Lead Resistance Value: 22 Ω Element Type: Wire Wound Passive Component Tolerance: 5 % Resistor Type: Power Resistor Resistance Class: Up to 1kΩ Chassis Mount Resistor | 22 Ω Wire Wound 5 % Power Resistor | Part Number: CJP600J22RJ | Internal Number: 1-2176511-5 | TE Connectivity
RoHS : Compliant

1 : $186.47

Teledyne HiRel

5962-8776001SA

Teledyne HiRel

BUFFER/DRIVER, OCTAL, NONINVERTING, W/3-STATE OUTPUTS, TTL-COMPATIBLE INPUTS
RoHS : Not Compliant

5962-8776001RA

Teledyne HiRel

BUFFER/DRIVER, OCTAL, NONINVERTING, W/3-STATE OUTPUTS, TTL-COMPATIBLE INPUTS
RoHS : Not Compliant

M38510/06006BEA

Teledyne HiRel

OR/NOR GATE, DUAL 4-5 INPUT
RoHS : Not Compliant

M38510/06006BFA

Teledyne HiRel

OR/NOR GATE, DUAL 4-5 INPUT

5962-87760012A

Teledyne HiRel

BUFFER/DRIVER, OCTAL, NONINVERTING, W/3-STATE OUTPUTS, TTL-COMPATIBLE INPUTS
RoHS : Not Compliant

5962-8776001BRA

Teledyne HiRel

BUFFER/DRIVER, OCTAL, NONINVERTING, W/3-STATE OUTPUTS, TTL-COMPATIBLE INPUTS
RoHS : Not Compliant

5962-8776001B2A

Teledyne HiRel

BUFFER/DRIVER, OCTAL, NONINVERTING, W/3-STATE OUTPUTS, TTL-COMPATIBLE INPUTS
RoHS : Not Compliant

5962-8776001BSA

Teledyne HiRel

BUFFER/DRIVER, OCTAL, NONINVERTING, W/3-STATE OUTPUTS, TTL-COMPATIBLE INPUTS
RoHS : Not Compliant

M38510/06006B2A

Teledyne HiRel

OR/NOR GATE, DUAL 4-5 INPUT
RoHS : Not Compliant

5962-8776001M2A

Teledyne HiRel

BUFFER/DRIVER, OCTAL, NONINVERTING, W/3-STATE OUTPUTS, TTL-COMPATIBLE INPUTS
RoHS : Not Compliant

5962-8776001MSA

Teledyne HiRel

BUFFER/DRIVER, OCTAL, NONINVERTING, W/3-STATE OUTPUTS, TTL-COMPATIBLE INPUTS
RoHS : Not Compliant

M38510/06006B2C

Teledyne HiRel

OR/NOR GATE, DUAL 4-5 INPUT

5962-8776001MRA

Teledyne HiRel

BUFFER/DRIVER, OCTAL, NONINVERTING, W/3-STATE OUTPUTS, TTL-COMPATIBLE INPUTS
RoHS : Not Compliant

Venkel Ltd.

C01005HQN160-0R4ANP

VENKEL LTD

High-Q NP0 Capacitor;01005;HQN;16V;0.4pF;�0.05pF
RoHS : Compliant

MELFC0102-UE-1600DT

VENKEL LTD

MELF Coated Thin Film CR;0102;1/5W;�25PPM;160R;�0.5%
RoHS : Compliant

MELFC0204-TC-1600BT

VENKEL LTD

MELF Coated Thin Film CR;0204;1/4W;�50PPM;160R;�0.1%
RoHS : Compliant

MELFC0204-TE-3600FT

VENKEL LTD

MELF Coated Thin Film CR;0204;1/4W;�25PPM;360R;�1%
RoHS : Compliant

MELFC0204-ZE-3600DT

VENKEL LTD

MELF Coated Thin Film CR;0204;2/5W;�25PPM;360R;�0.5%
RoHS : Compliant

MELFC0204-ZN-5600CT

VENKEL LTD

MELF Coated Thin Film CR;0204;2/5W;�10PPM;560R;�0.25%
RoHS : Compliant

MELFM0207-VE-3600CT

VENKEL LTD

MELF Molded Thin Film CR;0207;1/2W;�25PPM;360R;�0.25%
RoHS : Not Compliant

MELFM0207-XC-5600CT

VENKEL LTD

MELF Molded Thin Film CR;0207;1W;�50PPM;560R;�0.25%
RoHS : Not Compliant

HPCR0603-T-3600FT

VENKEL LTD

High Power CR;0603;1/4W;360R;�1%
RoHS : Compliant

HPTF0603-QE-3600UT

VENKEL LTD

High Power Thin Film CR;0603;1/10W;�25PPM;360R;�0.01%
RoHS : Compliant

HPTF0603-QN-1600DT

VENKEL LTD

High Power Thin Film CR;0603;1/10W;�10PPM;160R;�0.5%
RoHS : Compliant

HPTF0603-SE-3600AT

VENKEL LTD

High Power Thin Film CR;0603;1/6W;�25PPM;360R;�0.05%
RoHS : Compliant

HPTF0805-RP-1600UT

VENKEL LTD

High Power Thin Film CR;0805;1/8W;�5PPM;160R;�0.01%
RoHS : Compliant

HPTF1206-TN-5600CT

VENKEL LTD

High Power Thin Film CR;1206;1/4W;�10PPM;560R;�0.25%
RoHS : Compliant

HPTF1210-UP-5600UT

VENKEL LTD

High Power Thin Film CR;1210;1/3W;�5PPM;560R;�0.01%
RoHS : Compliant

Wuhan P&S

SF1600-TAP

Vishay Intertechnologies

1600V,1A,Ultrafast Avalanche Diode
RoHS : Compliant

1 : $0.61
100 : $0.22
500 : $0.16
1,000 : $0.15

167,500

VS-E5PH6006L-N3

Vishay Intertechnologies

Hyperfast Rectifier, 60A ,600V
RoHS : Compliant

1 : $3.84
100 : $1.39
500 : $1.0
1,000 : $0.93

82,500

MCH6001-TL-E

onsemi

RoHS : Compliant

1 : $0.55
100 : $0.36
500 : $0.29
1,000 : $0.27

12,000

NTMFS5H600NLT1G

onsemi

60V,1.3m��,250A,Single N-Ch Power MOSFET
RoHS : Compliant

1 : $3.62
100 : $2.31
500 : $1.91
1,000 : $1.75

3,000

71600-026LF

Amphenol FCi

IDC Receptacle,Double row,26 P,2.54mm
RoHS : Compliant

1 : $1.4
100 : $1.36
500 : $1.33
1,000 : $1.3

1,080

BTA25-600CW3G

Littelfuse Inc

Triacs Silicon Bidirectional Thyristors
RoHS : Compliant

1 : $1.42
100 : $1.14
500 : $1.05
1,000 : $0.99

550

STUSB4600QTR

STMicroelectronics

1 : $1.13
100 : $1.13
500 : $1.13
1,000 : $1.13

T435-600B-TR

STMicroelectronics

4 A Triacs
RoHS : Compliant

1 : $1.48
100 : $0.5
500 : $0.46
1,000 : $0.45

MICROFJ-SMA-60035-GEVB

onsemi

Evaluation board

1 : $1,167.76
100 : $745.38
500 : $614.61
1,000 : $565.05

600-1-PLP-R Distributor

Link URL