 |
Electronic Components Datasheet Search |
|
|
Electronic Components Datasheet Search |
|
610T-100-R Distributor |
| Distributor | Part # | Manufacturer | Description | Price | Qty. BuyNow | |
 DB Roberts | CAL2-610-4.2B | SHEREX FASTENING SO | RIVET NUT,ROUND,CLOSED END STEEL |
| 5,863 | |
| E6-10-200-50 | Southco | Southcos line of Constant Torque Position Control Hinges provide constant resistance throughout the entire range of motion enabling users to easily position doors display screens and other mounted components and hold them securely at any desired angle RoHS : Compliant |
| 359 | ||
| E3-16-10 | Southco | The smooth operation of theVISE ACTION� design aligns the pawl behind the frame and draws it up tight with a single continuous half-turn motion. Its compression action provides consistent 6.4 mm (.25) pull-up for environmental sealing in gasketed applic |
| 158 | ||
| AEKS8-610-4.2B | PennEngineering (PEM) | Feature a minimized-profile head and knurled shank.Allows near-flush installations with no need for special hole preparations such as countersinking or dimpling.Additional thread sizes and grip ranges available.Also available in aluminum brass and monel |
| 34 | ||
| 006106100001 | Essentra Components | 0 | ||||
| 081061050001 | Essentra Components | 0 | ||||
| 47-11-266-10 | Southco | Southco 47 Class captive screws offer hundreds of permutations of installation and tool-actuation styles for mounting doors panels and other hardware components in limited-space applications. | 0 | |||
| 47-81-566-10 | Southco | Southco 47 Class captive screws offer hundreds of permutations of installation and tool-actuation styles for mounting doors panels and other hardware components in limited-space applications. | 0 | |||
| 47-81-610-10 | Southco | Southco 47 Class captive screws offer hundreds of permutations of installation and tool-actuation styles for mounting doors panels and other hardware components in limited-space applications. | 0 | |||
| 53-72-610-26 | Southco | These screws and captive screws provide an attractive polished finish and ample shaft length to mate with threaded receptacle on frame throughout a range of panel thicknesses. They are available with spring ejection to retract the screw body when threads | 0 | |||
| 56-10-803-10 | Southco | 0 | ||||
| AEKC-610-3.3 | PennEngineering (PEM) | 0 | ||||
| E3-1016-101 | Southco | The smooth operation of theVISE ACTION� design aligns the pawl behind the frame and draws it up tight with a single continuous half-turn motion. Its compression action provides consistent 6.4 mm (.25) pull-up for environmental sealing in gasketed applic | 0 | |||
| E6-10-440F-50 | Southco | 0 | ||||
| OPT2-610-3.5 | SHEREX FASTENING SO | 0 | ||||
 EBV Elektronik | SFH6106-4T | Vishay Intertechnologies | Optocoupler 1 Channel Surface Mount DIP 4 Pins 60 mA 53 kV 160 (Alt: SFH6106-4T) RoHS : Compliant | 64,000 | ||
| EMIF06-1005MX12Y | STMicroelectronics | 6 Channel EMI Filter with Integrated ESD Protection 50pF 34dB Solder SMD 12Pin WFQFN TR (Alt: EMIF06-1005MX12Y) RoHS : Compliant | 45,000 | |||
| SFH6106-3T | Vishay Intertechnologies | SMD4 OPTOCPLR 100200 CTR e3 (Alt: SFH6106-3T) RoHS : Compliant | 30,000 | |||
| 61-036/GBRSB7W-B06/ET | Everlight Electronics Co Ltd | (Alt: 3961036006) RoHS : Compliant | 16,800 | |||
| HCPL-0661-000E | Broadcom Limited | (Alt: HCPL-0661-000E) RoHS : Compliant | 15,700 | |||
| DSC6101HE2B-012.0000T | Microchip Technology Inc | MEMS Oscillator 12 MHz SMD 16mm x 12mm 25 ppm 33 V DSC61xxB (Alt: DSC6101HE2B-012.0000T) RoHS : Compliant | 11,000 | |||
| 67-21SURC/S530-A2/S610/TR8 | Everlight Electronics Co Ltd | LED Single Chip Red 630nm 25mA 2Pin PLCC TR (Alt: 3867216207) RoHS : Compliant | 8,000 | |||
IRF610SPBF | Vishay Intertechnologies | MOSFET NCHANNEL 200V (Alt: IRF610SPBF) RoHS : Compliant | 4,200 | |||
| SFH610A-3X007T | Vishay Intertechnologies | SMD4 OPTOCPLR 100200 CTR e3 (Alt: SFH610A-3X007T) RoHS : Compliant | 4,000 | |||
| TSAL6100-MS12 | Vishay Intertechnologies | IR EMITTER HIGH POWR 950NM 5MM 10DEGe3 (Alt: TSAL6100-MS12) RoHS : Compliant | 3,000 | |||
| NTMFS5H610NLT1G | onsemi | Power MOSFET N Channel 60 V 44 A 0008 ohm DFN Surface Mount (Alt: NTMFS5H610NLT1G) RoHS : Compliant | 1,500 | |||
| T1610T-8T | STMicroelectronics | Thyristor TRIAC 800V 126A 3Pin TO220AB Tube (Alt: T1610T-8T) RoHS : Compliant | 1,000 | |||
| SFH6106-4 | Vishay Intertechnologies | SMD4 OPTOCPLR 160320 CTR e3 (Alt: SFH6106-4) RoHS : Compliant | 800 | |||
| HEDS-6100#A12 | Broadcom Limited | Two and Three Channel Codewheels (Alt: HEDS-6100#A12) RoHS : Compliant | 100 | |||
AT17LV256-10JU | Microchip Technology Inc | EEPROM Serial2Wire 256Kbit 256K x 1 33V5V 20Pin PLCC (Alt: AT17LV256-10JU) RoHS : Compliant | 48 | |||
 ECCO | 10-825816-10P | Amphenol Industrial Operations |
| 163 | ||
| AE556L16-10SW-01 | Aero-Electric Connector Inc | 80 | ||||
| MS3452W16-10SW-LC | Aero-Electric Connector Inc | 79 | ||||
| AE552W16-10S-01 | Aero-Electric Connector Inc | 79 | ||||
| MS3456W16-10AY | Aero-Electric Connector Inc | 78 | ||||
| AE550L16-10SY-01 | Aero-Electric Connector Inc | 47 | ||||
| AE550L16-10BW | Aero-Electric Connector Inc | 47 | ||||
| AE550L16-10PW-01 | Aero-Electric Connector Inc | 47 | ||||
| MS3450L16-10AW | Aero-Electric Connector Inc | 47 | ||||
| CA3108E16-10SF178 | ITT Interconnect Solutions |
| 23 | |||
| MS3451W16-10PW-LC | Aero-Electric Connector Inc | 15 | ||||
| MS3451W16-10BY | Aero-Electric Connector Inc | 15 | ||||
| MS3451W16-10SX-LC | Aero-Electric Connector Inc | 15 | ||||
| MS3451W16-10PY-LC | Aero-Electric Connector Inc | 15 | ||||
| AE551W16-10PX-LC | Aero-Electric Connector Inc | 15 | ||||
 Flip Electronics | NDS0610-G | onsemi | Stock, Ship Today |
| 969,423 | |
| FAN48610BUC50X | onsemi | Stock, Ship Today RoHS : Compliant | 954,000 | |||
| FDMA86108LZ | onsemi | Stock, Ship Today RoHS : Compliant | 65,745 | |||
| FDMC86106LZ | onsemi | Stock, Ship Today | 57,000 | |||
| NRVTS6100PFST3G | onsemi | Stock, Ship Today RoHS : Compliant |
| 48,055 | ||
| FDD86102 | onsemi | Stock, Ship Today RoHS : Compliant | 37,500 | |||
| NRTS6100PFST3G | onsemi | Stock, Ship Today RoHS : Compliant |
| 34,395 | ||
| FDMS3610S | onsemi | Stock, Ship Today RoHS : Compliant |
| 12,000 | ||
JN5161/001,515 | NXP Semiconductors | Stock RoHS : Compliant | 6,953 | |||
| MCH6102-TL-E | onsemi | Stock, Ship Today RoHS : Compliant |
| 6,000 | ||
ISPPAC-CLK5610AV-01TN48C | Lattice Semiconductor Corporation | Stock, Ship Today RoHS : Compliant |
| 4,155 | ||
| CG8610AA | Infineon Technologies AG | Stock | 2,400 | |||
| MC8610TPX1066JB | NXP Semiconductors | Stock, Ship Today RoHS : Not Compliant |
| 1,746 | ||
| DSS2X61-0045A | Littelfuse Inc | Stock RoHS : Compliant | 1,570 | |||
| BLP10H610AZ | Flip Electronics Manufacturing Services | Stock, Ship Today | 1,393 | |||
 Maritex | 1376109-1 | TE Connectivity | Rectangular Connector Contacts; 1376109-1; TE CONNECTIVITY; Tin; Crimp; Cable; Connector, PCB, Signal, Tab RoHS : Compliant |
| 730,948 | |
| ULO-TB25-301/5.0-03P-6100B | ULO | PCB terminal block; pitch 5.00mm; 3-ways; vertical; wire range 1.5mm2 (AWG 26-14); with screws for a cross screwdriver; brass cage; red color; UL 300V/20A, TUV 250V/17.5A |
| 6,473 | ||
| JS-1261-02 | Chyao Shiunn Electronic Industrial Ltd | Header for PCB; pitch 2.00mm; 2-contacts; SMD; male; top entry; 100V/2A |
| 3,293 | ||
| RNP18-PKS0406-102K | RDA Microelectronics | Inductor: wire; THT; 1000uH; 0.15A; 15R; 8.5x5.5x24.5mm; 10% |
| 2,000 | ||
| CP-01416100 | Cvilux Corporation | Header for PCB; pitch 4.20mm; 16-contacts [2x8]; THT; male; side entry; 2 rows; 300V/9A RoHS : Compliant |
| 1,133 | ||
| 6100.4325 | Schurter Electronic Components | AC power inlet IEC 60320 C14, protection class I; mounting: panel thickness 2.5mm, snap-in; QC 6.3x0.8mm terminals; black; IP30; 10A, 250VAC RoHS : Compliant |
| 1,000 | ||
| GBU610_T0_00601 | PanJit Semiconductor | Rectifier Diodes & Bridges; GBU610_T0_00601; PANJIT |
| 440 | ||
| CRCW120610K0JNTA | Vishay Intertechnologies | Chip Resistor; SMD; 1206; 10K; 5%; 1/4W RoHS : Not Compliant |
| 360 | ||
| MC610-EU-02-30 | Fibocom Wireless Inc | Module; LTE Cat1/2G/WIFI; BLE; (D)FOTA; VoLTE; 3.3-4.3V; LCC+LGA; 24.2x26.2x2.1mm; Europe |
| 98 | ||
| CR-02FL6---10K | Viking Technology | Chip Resistor; SMD; 0402; 10K; 1%; 1/16W |
| 92 | ||
| CRCW120610K0FKTABC | Vishay Intertechnologies | Chip Resistor; SMD; 1206; 10K; 1%; 1/4W RoHS : Compliant |
| 32 | ||
| DK200610_12CW_81X81S_XP_VA01_P6M | PCB-TECH | MCPCB aluminium board, 12x CREE XP, circle diameter 81 mm, thickness 1.6mm; copper 35um; white soldermask; immersion gold, panel: 6 pcs |
| 18 | ||
| C146 10Z016 100 1 | Amphenol Tuchel | Protective cover for panel enclosure for Heavy-Mate A series; size: A10; operating temperature: -40 deg.C to 100 deg.C; IP68 |
| 5 | ||
| FMAC-091D-3610 | Schurter Electronic Components | Power line filter modules; FMAC-091D-3610; 36 A; 100 �C; -25 �C; 480 V RoHS : Compliant |
| 4 | ||
| 61082-102400LF | Amphenol Corporation | Rectangular Connectors - Arrays, Edge Type, Mezzanine (Board-to-Board); 61082-102400LF; AMPHENOL; 2; Straight; 800 mA; Yes |
| 2 | ||
 Pasternack Enterprises US | PE3W06109LF/HS-12 | Pasternack Enterprises | Key Specifications, Connector Series 1: TNC, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Right Angle, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: TNC, Connector Gender 2: Female, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: LMR-195, RF Cable Type: LMR-195, RF Cable Impedance: 50 Ohm, Length: 12 inches. TNC Male Right Angle to TNC Female Cable 12 Inch Length Using LMR-195 Coax with HeatShrink, LF Solder., Radio frequency assembly TNC male right angle to TNC female cable 12 inch length using LMR-195 coax with heatshrink, LF solder from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. TNC male right angle to TNC female cable 12 inch length using LMR-195 coax with heatshrink, LF solder, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom TNC to TNC cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with right angle TNC cable connection on one end and TNC cable connection on the other. Our right angle TNC to TNC cable assemblies have a male gender on end 1 and female on end 2. This TNC to TNC cable is a male to female coax assembly, PE3W06109LF/HS-12, can also be known as a right angle TNC plug to TNC jack cable assembly and will be shipped same-day as it is purchased. TNC plug to TNC jack cable assembly PE3W06109LF/HS-12 is built with LMR-195 which is a flexible coax type. The Pasternack flexible TNC cable assembly is manufactured with right angle TNC to TNC cable connectors, has a 50 Ohm impedance and is double shielded. RF specs on this 3 GHz maximum frequency TNC right angle male to TNC female cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3W06109LF/HS-12 can also be used in the other direction and will be TNC female to right angle TNC male cable assembly if the opposite connectivity is required. TNC right angle plug to TNC jack cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality TNC to TNC cable assembly for quick shipment worldwide. Variations of TNC cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this TNC male right angle to TNC female cable 12 inch length using LMR-195 coax with heatshrink, LF solder. |
| 1,992 | |
| PE3W02976-100CM | Pasternack Enterprises | Key Specifications, Connector Series 1: N, Connector Gender 1: Female, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: N, Connector Gender 2: Female, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: Bulkhead, Connector Impedance 2: 50 Ohm, RF Cable Part Number: PE-P195, RF Cable Type: PE-P195, RF Cable Impedance: 50 Ohm, Length: 39.37 inches. N Female to N Female Bulkhead Cable 100 cm Length Using PE-P195 Coax., Radio frequency assembly N female to N female bulkhead cable 100 cm length using PE-P195 coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. N female to N female bulkhead cable 100 cm length using PE-P195 coax, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom type N to type N cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with N type cable connection on one end and N type bulkhead cable connection on the other. Our type N to type N cable assemblies have a female gender on end 1 and female on end 2. This type N to N type cable is a female to female coax assembly, PE3W02976-100CM, can also be known as a type N jack to N type jack cable assembly and will be shipped same-day as it is purchased. Type N jack to type N jack cable assembly PE3W02976-100CM is built with PE-P195 which is a flexible coax type. The Pasternack flexible N cable assembly is manufactured with type N to N type cable connectors, has a 50 Ohm impedance and is triple shielded. RF specs on this 3 GHz maximum frequency type N female to type N female bulkhead cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3W02976-100CM can also be used in the other direction and will be N type female bulkhead to type N female cable assembly if the opposite connectivity is required. Type N jack to type N jack bulkhead cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality N type to type N cable assembly for quick shipment worldwide. Variations of N type cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this N female to N female bulkhead cable 100 cm length using PE-P195 coax. |
| 324 | ||
| PE36109LF-48 | Pasternack Enterprises | Key Specifications, Connector Series 1: 1.6/5.6, Connector Gender 1: Plug, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 75 Ohm, Connector Series 2: 1.6/5.6, Connector Gender 2: Plug, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 75 Ohm, RF Cable Part Number: RG59B/U, RF Cable Type: RG59, RF Cable Impedance: 75 Ohm, Length: 48 inches. 75 Ohm 1.6/5.6 Plug to 75 Ohm 1.6/5.6 Plug Cable 48 Inch Length Using 75 Ohm RG59 Coax, RoHS., Radio frequency assembly 75 Ohm 1.6/5.6 plug to 75 Ohm 1.6/5.6 plug cable 48 inch length using 75 Ohm RG59 coax, RoHS from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. 75 Ohm 1.6/5.6 plug to 75 Ohm 1.6/5.6 plug cable 48 inch length using 75 Ohm RG59 coax, RoHS, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom 1.6/5.6 to 1.6/5.6 cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with 1.6/5.6 cable connection on one end and 1.6/5.6 cable connection on the other. Our 1.6/5.6 to 1.6/5.6 cable assemblies have a plug gender on end 1 and plug on end 2. This 1.6/5.6 to 1.6/5.6 cable is a plug to plug coax assembly, PE36109LF-48, can also be known as a 1.6/5.6 male to 1.6/5.6 male cable assembly and will be shipped same-day as it is purchased. 1.6/5.6 male to 1.6/5.6 male cable assembly PE36109LF-48 is built with RG59 which is a flexible coax type. The Pasternack flexible 1.6/5.6 cable assembly is manufactured with 1.6/5.6 to 1.6/5.6 cable connectors, has a 75 Ohm impedance and is single shielded. RF specs on this 1.6/5.6 plug to 1.6/5.6 plug cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. 1.6/5.6 male to 1.6/5.6 male cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality 1.6/5.6 to 1.6/5.6 cable assembly for quick shipment worldwide. Variations of 1.6/5.6 cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this 75 Ohm 1.6/5.6 plug to 75 Ohm 1.6/5.6 plug cable 48 inch length using 75 Ohm RG59 coax, RoHS. |
| 112 | ||
| PE3FCA406-10M | Pasternack Enterprises | Key Specifications, Mode: Multimode, Multimode Class: OM3, Fiber Diameter: 50/125, Cable Assembly Color: Aqua Blue, Return Loss Min: 30 dB, Insertion Loss Max: 0.3 dB, Connector 1 Series: LC, Connector 1 Polish Type: UPC, Connector 2 Series: LC, Connector 2 Polish Type: UPC, Jacket Burn Rating: OFNP, Cable Diameter: 6.2 mm, Max Crush Resistance, Short Term (N/100mm): 1,000, Max Crush Resistance, Long Term (N/100mm): 300, Max Operating Temperature: 60 deg C, Min Operating Temperature: 0 deg C, Ingress Protection (IP) Rating: Non-Rated. 12-Fiber LC UPC to LC UPC, OM3 Multimode Distribution Cable, 6.2mm Plenum, 2.0mm breakout, Aqua-10M. Pasternack’s PE3FCA406-10M fiber optic breakout cord is a robust and versatile fiber optic cable assembly designed for high-performance data transmission in various environments. This 10-meter long 12-fiber cable assembly is equipped with LC/UPC to LC/UPC connectors. Our aqua blue fiber optic cable has a plenum (OFNP) rated PVC jacket that ensures compliance with fire and safety standards. With an operating temperature range of 0 to 60 degrees C and a storage temperature range of -20 to 60 degrees C, this cable provides reliable performance across diverse conditions. This distribution cable assembly comes with a multimode OM3 fiber which is optimized for VCSEL laser sources, making it ideal for 10Gb Ethernet up to 300 meters and 40G/100G Ethernet up to 100 meters, and offers a bandwidth of 2000 MHz·km, ensuring high-speed data transmission with minimal signal loss. The fiber optic jumper from Pasternack is suitable for applications such as data centers, passive optical networks (PON), local area networks (LAN), enterprise networking, storage and cloud based services, AI data storage and communications, headend termination to a fiber backbone and terminations of data center fiber rack system. Additional dimensions, specifications, and CAD drawings for this 12-strand fiber optic breakout cord component can be found on its downloadable PDF datasheet. This PE3FCA406-10M fiber optic cable with a 6.2 mm cable diameter and 47 mm bend radius offers flexible installation options. Pasternack has one of the largest in-stock selections of LC/UPC to LC/UPC fiber optic breakout cords for international and domestic orders. Make your online purchase right now to take advantage of our same-business-day shipping. Whether for enterprise networks, storage area networks (SANs), or high-speed backbones, this OM3 fiber assembly guarantees outstanding network performance. For further information on similar products, our expert technical support and knowledgeable sales team can help you get the ideal OM3 multimode fiber optic cable that meets your requirements. |
| 28 | ||
| PE3C6176-100CM | Pasternack Enterprises | Key Specifications, Connector Series 1: 4.3-10, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: 4.3-10, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Right Angle, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: SPP-250-LLPL, RF Cable Type: SPP-250-LLPL, RF Cable Impedance: 50 Ohm, Length: 39.3701 inches. Plenum 4.3-10 Male to 4.3-10 Male Right Angle Low PIM Cable 100 cm Length Using SPP-250-LLPL Coax Using Times Microwave Parts., Radio frequency assembly plenum 4.3-10 male to 4.3-10 male right angle low PIM cable 100 cm length using SPP-250-LLPL coax using Times Microwave parts from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack low PIM (Passive Intermodulation, also called Intermod for short) coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. Plenum 4.3-10 male to 4.3-10 male right angle low PIM cable 100 cm length using SPP-250-LLPL coax using Times Microwave parts, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom TC-250-4310M-LP 4.3-10 to TC-250-4310M-RA-LP 4.3-10 cable assembly orders will ship same day as well. Pasternack RF coax low PIM cable assembly is built with TC-250-4310M-LP 4.3-10 cable connection on one end and right angle TC-250-4310M-RA-LP 4.3-10 cable connection on the other. Our low PIM TC-250-4310M-LP 4.3-10 to right angle TC-250-4310M-RA-LP 4.3-10 cable assemblies have a male gender on end 1 and male on end 2. This TC-250-4310M-LP 4.3-10 to TC-250-4310M-RA-LP 4.3-10 cable is a male to male coax assembly, PE3C6176-100CM, can also be known as a low PIM TC-250-4310M-LP 4.3-10 plug to right angle TC-250-4310M-RA-LP 4.3-10 plug cable assembly and will be shipped same-day as it is purchased. TC-250-4310M-LP 4.3-10 plug to TC-250-4310M-RA-LP 4.3-10 plug cable assembly PE3C6176-100CM is built with SPP-250-LLPL which is a corrugated coax type. The Pasternack low passive intermodulation corrugated TC-250-4310M-LP 4.3-10 cable assembly is manufactured with TC-250-4310M-LP 4.3-10 to right angle TC-250-4310M-RA-LP 4.3-10 cable connectors, has a 50 Ohm impedance and is single shielded. RF specs on this 5.8 GHz maximum frequency low PIM TC-250-4310M-LP 4.3-10 male to TC-250-4310M-RA-LP 4.3-10 right angle male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3C6176-100CM can also be used in the other direction and will be right angle TC-250-4310M-RA-LP 4.3-10 male to TC-250-4310M-LP 4.3-10 male cable assembly if the opposite connectivity is required. Low PIM TC-250-4310M-LP 4.3-10 plug to TC-250-4310M-RA-LP 4.3-10 right angle plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality TC-250-4310M-LP 4.3-10 to TC-250-4310M-RA-LP 4.3-10 cable assembly for quick shipment worldwide. Variations of TC-250-4310M-LP 4.3-10 cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this plenum 4.3-10 male to 4.3-10 male right angle low PIM cable 100 cm length using SPP-250-LLPL coax using Times Microwave parts. |
| 8 | ||
| PE3C8386-100CM | Pasternack Enterprises | Key Specifications, Connector Series 1: 2.2-5, Connector Gender 1: Female, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: N, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Right Angle, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: TFT-402, RF Cable Type: TFT-402, RF Cable Impedance: 50 Ohm, Length: 39.37 inches. 2.2-5 Female to N Male Right Angle Low PIM Cable 100 CM Length Using TFT-402 Coax Using Times Microwave Components., Radio frequency assembly 2.2-5 female to N male right angle low PIM cable 100 cm length using TFT-402 coax using Times Microwave components from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack low PIM (Passive Intermodulation, also called Intermod for short) coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. 2.2-5 female to N male right angle low PIM cable 100 cm length using TFT-402 coax using Times Microwave components, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom 2.2-5 to type N cable assembly orders will ship same day as well. Pasternack RF coax low PIM cable assembly is built with 2.2-5 cable connection on one end and right angle N type cable connection on the other. Our low PIM 2.2-5 to right angle type N cable assemblies have a female gender on end 1 and male on end 2. This 2.2-5 to type N cable is a female to male coax assembly, PE3C8386-100CM, can also be known as a low PIM 2.2-5 jack to right angle type N plug cable assembly and will be shipped same-day as it is purchased. 2.2-5 jack to N type plug cable assembly PE3C8386-100CM is built with TFT-402 which is a flexible coax type. The Pasternack low passive intermodulation flexible 2.2-5 cable assembly is manufactured with 2.2-5 to right angle N type cable connectors, has a 50 Ohm impedance and is double shielded. RF specs on this 5.8 GHz maximum frequency low PIM 2.2-5 female to type N right angle male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3C8386-100CM can also be used in the other direction and will be right angle type N male to 2.2-5 female cable assembly if the opposite connectivity is required. Low PIM 2.2-5 jack to N type right angle plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality 2.2-5 to type N cable assembly for quick shipment worldwide. Variations of 2.2-5 cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this 2.2-5 female to N male right angle low PIM cable 100 cm length using TFT-402 coax using Times Microwave components. |
| 0 | ||
| PE3FCA726-10M | Pasternack Enterprises | Key Specifications, Mode: Single Mode, Multimode Class: OS2, Fiber Diameter: 9/125, Connector 1 Series: MPO (w/o pins), Connector 1 Polish Type: UPC, Connector 2 Series: LC, Connector 2 Polish Type: UPC, Jacket Burn Rating: OFNP, Cable Diameter: 3 mm, Max Crush Resistance, Short Term (N/100mm): 500, Max Crush Resistance, Long Term (N/100mm): 100, Max Operating Temperature: 60 deg C, Min Operating Temperature: 0 deg C, Ingress Protection (IP) Rating: Non-Rated. Type B MPO/UPC Female (w/o pins) to LC/UPC Clipped fan-out, 2.0mm Diameter, 8 Fiber, Single Mode OS2, OFNP Jacket-10M. Pasternack’s PE3FCA726-10M fiber optic fan-out cord is a robust and versatile fiber optic cable assembly designed for high-performance data transmission in various environments. This 10-meter long fan-out cable assembly is equipped with MPO (w/o pins)/UPC to LC/UPC duplex clip connectors. Our fiber optic cable has a plenum (OFNP) rated PVC jacket that ensures compliance with fire and safety standards. With an operating temperature range of 0 to 60 degrees C and a storage temperature range of -20 to 60 degrees C, this cable provides reliable performance across diverse conditions. The fiber optic jumper from Pasternack is suitable for applications such as 40G BiDi and parallel optics connectivity, reduced-fiber-count data center architectures, MPO to LC equipment breakout cabling, high-speed switch and server interconnects and telecom and enterprise fiber routing systems. This fan-out cable has a single mode OS2 fiber and comes with a breakout diameter of 2 mm. With the flexibility of custom lengths, the PE3FCA726-10M fiber optic assembly can be tailored to meet specific installation requirements, ensuring efficient network management in high-density setups without compromising on delivery time or quality. Additional dimensions, specifications, and CAD drawings for this 8-strand fiber optic fan-out cord can be found on its downloadable PDF datasheet. This PE3FCA726-10M fiber optic cable with a 3 mm cable diameter and 23 mm bend radius offers flexible installation options. Pasternack has one of the largest in-stock selections of MPO (w/o pins)/UPC to LC/UPC fiber optic fan-out cords for international and domestic orders. Make your online purchase right now to take advantage of our same-business-day shipping. For further information on similar products, our expert technical support and knowledgeable sales team can help you get the ideal OS2 single mode fiber optic cable that meets your requirements. |
| 0 | ||
| PE3W10956-108 | Pasternack Enterprises | Key Specifications, Connector 1 Series: HN, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: HN, Connector 2 Gender: Female, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: RG214/U, RF Cable Type: RG214, RF Cable Impedance: 50 Ohm, Length, Max: 108 inches. HN Male to HN Female Cable 108 Inch Length Using RG214 Coax., Radio frequency assembly HN male to HN female cable 108 inch length using RG214 coax from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, general use, etc. The HN male to HN female cable 108 inch length using RG214 coax, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom HN to HN cable assembly orders will ship the same business day as well. Pasternack RF coax cable assembly is built with a HN cable connection on one end and a HN cable connection on the other. Our HN to HN cable assembly has a male gender on end 1 and a female on end 2. PE3W10956-108 can also be known as a HN plug to HN jack cable assembly and will be shipped the same day as it is purchased. This flexible RF cable assembly with a 0.5-inch diameter has copper as the cable's inner conducting material and PE dielectric type. This cable assembly employs durable and flexible materials, and with a 1.6-inch bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. Our PE3W10956-108 RF cable has a PVC jacket of 0.425-inch diameter. This radio frequency cable assembly can withstand temperatures ranging from -20 to 80 degrees C. The flexible RF cable has an in-series connection. Our HN male to HN female cable has a maximum VSWR of 1.4:1. HN plug to HN jack cable assembly PE3W10956-108 is built with RG214 which is a flexible coax type. The Pasternack flexible HN cable assembly is manufactured with HN to HN cable connectors, has a 50 Ohm impedance, and is double shielded. Both the connectors have a clamp/solder attachment method and a brass body with nickel plating. Additional dimensions, specifications and CAD drawings for this RF cable are available on our downloadable PDF datasheet. PE3W10956-108 can also be used in the other direction and will be a HN female to HN male cable assembly if the opposite connectivity is required. HN plug to HN jack cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality HN to HN cable assembly for quick shipment worldwide. Variations of HN cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal HN to HN RF cable assembly as per your requirements. |
| 0 | ||
| PE3W16109 | Pasternack Enterprises | Key Specifications, Connector Series 1: 2.2-5, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: N, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: PE-SR402FLJ, RF Cable Type: PE-SR402FLJ, RF Cable Impedance: 50 Ohm. 2.2-5 Male to N Male Cable Using PE-SR402FLJ Coax. PE3W16109 is a 2.2-5 male to N male cable using PE-SR402FLJ coax. This Pasternack 2.2-5 male to N male cable assembly uses a 50 Ohm 2.2-5 for connector 1 and a 50 Ohm N for connector 2. Our male 2.2-5 to male N cable assembly uses a formable cable type that is 50 Ohm. Pasternack PE3W16109 2.2-5 male to N male cable assembly is constructed with PE-SR402FLJ coax. | 0 | |||
| PE3W19610 | Pasternack Enterprises | Key Specifications, Connector Series 1: MMBX, Connector Gender 1: Plug, Connector Polarity 1: Standard, Connector Angle 1: Right Angle, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: SMC, Connector Gender 2: Jack, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: Bulkhead, Connector Impedance 2: 50 Ohm, RF Cable Part Number: RG178B/U, RF Cable Type: RG178, RF Cable Impedance: 50 Ohm. Snap-On MMBX Plug Right Angle to SMC Jack Bulkhead Cable Using RG178 Coax. PE3W19610 is a MMBX plug right angle to SMC jack bulkhead cable using RG178 coax. This Pasternack MMBX plug right angle to SMC jack bulkhead cable assembly uses a 50 Ohm MMBX for connector 1 and a 50 Ohm SMC for connector 2. MMBX right angle to SMC coaxial cable assembly uses 90 degree right angle coax cable connector. Our plug MMBX right angle to jack SMC bulkhead cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE3W19610 MMBX plug right angle to SMC jack bulkhead cable assembly is constructed with RG178 coax. | 0 | |||
| PE71S6107 | Pasternack Enterprises | Key Specifications, Connector Series: 2.92mm, Connector Gender: Female, Switch Design: SPDT, Minimum Frequency: DC, Maximum Frequency: 40 GHz, Impedance: 50 Ohm, Maximum Input Power (CW): 5 Watts, Maximum VSWR: 2:1, Maximum Insertion Loss: 0.9 dB, Minimum Isolation: 50 dB. SPDT Electromechanical Relay Latching Switch, DC to 40 GHz, 5W, 28V Self Cut Off, Diodes, 2.92mm. PE71S6107 electromechanical RF relay switch from Pasternack is a SPDT design. Our SPDT electromechanical RF switch uses 2.92mm connectors at 50 Ohm. This 2.92mm RF relay SPDT switch has a maximum frequency of 40 GHz and maximum power of 5 Watts. The Pasternack radio frequency SPDT 2.92mm electro-mechanical relay switch is rated at a control voltage of 28 Volts, indicator voltage and switching speed of 15ms. 2.92mm SPDT electro mechanical RF relay switch features Self Cut Off, Diodes with an isolation minimum of 50 dB. SPDT electromechanical relay radio frequency switch PE71S6107 is part of over 40,000 RF, microwave and millimeter wave components available from Pasternack. Our SPDT 2.92mm coaxial RF relay electromechanical switch can ship worldwide the same day that it is bought as with our other available RF parts. |
| 0 | ||
| PE36108LF-12 | Pasternack Enterprises | Key Specifications, Connector Series 1: SMA, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: MC-Card, Connector Gender 2: Plug, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: RG316/U, RF Cable Type: RG316, RF Cable Impedance: 50 Ohm, Length: 12 inches. SMA Male to MC-Card Plug Cable 12 Inch Length Using RG316 Coax, RoHS., Radio frequency assembly SMA male to MC-Card plug cable 12 inch length using RG316 coax, RoHS from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. SMA male to MC-Card plug cable 12 inch length using RG316 coax, RoHS, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom SMA to MC-Card cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with SMA cable connection on one end and MC-Card cable connection on the other. Our SMA to MC-Card cable assemblies have a male gender on end 1 and plug on end 2. This SMA to MC-Card cable is a male to plug coax assembly, PE36108LF-12, can also be known as a SMA plug to MC-Card male cable assembly and will be shipped same-day as it is purchased. SMA plug to MC-Card male cable assembly PE36108LF-12 is built with RG316 which is a flexible coax type. The Pasternack flexible SMA cable assembly is manufactured with SMA to MC-Card cable connectors, has a 50 Ohm impedance and is single shielded. RF specs on this SMA male to MC-Card plug cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE36108LF-12 can also be used in the other direction and will be MC-Card plug to SMA male cable assembly if the opposite connectivity is required. SMA plug to MC-Card male cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality SMA to MC-Card cable assembly for quick shipment worldwide. Variations of SMA cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this SMA male to MC-Card plug cable 12 inch length using RG316 coax, RoHS. |
| 0 | ||
| PE3FCA756-10M | Pasternack Enterprises | Key Specifications, Mode: Single Mode, Multimode Class: OS2, Fiber Diameter: 9/125, Connector 1 Series: MPO (w/ pins), Connector 1 Polish Type: APC, Connector 2 Series: LC, Connector 2 Polish Type: UPC, Jacket Burn Rating: LSZH, Cable Diameter: 3 mm, Max Crush Resistance, Short Term (N/100mm): 500, Max Crush Resistance, Long Term (N/100mm): 100, Max Operating Temperature: 60 deg C, Min Operating Temperature: 0 deg C, Ingress Protection (IP) Rating: Non-Rated. Type B MPO/APC Male (w/pins) to LC/UPC Clipped fan-out, 2.0mm Diameter, 12 Fiber, Single Mode OS2, LSZH Jacket-10M. Pasternack’s PE3FCA756-10M fiber optic fan-out cord is a robust and versatile fiber optic cable assembly designed for high-performance data transmission in various environments. This 10-meter long fan-out cable assembly is equipped with MPO (w/ pins)/APC to LC/UPC duplex clip connectors. Our fiber optic cable has an LSZH (low smoke zero halogen) rated PE jacket that ensures compliance with fire and safety standards. With an operating temperature range of 0 to 60 degrees C and a storage temperature range of -20 to 60 degrees C, this cable provides reliable performance across diverse conditions. The fiber optic jumper from Pasternack is suitable for applications such as data center backbone and switch-to-server connectivity, high-density fiber patching and cross-connect systems, 40G and 100G single mode network deployments, MPO trunk to LC equipment breakout applications and enterprise and telecommunications fiber distribution. This fan-out cable has a single mode OS2 fiber and comes with a breakout diameter of 2 mm. With the flexibility of custom lengths, the PE3FCA756-10M fiber optic assembly can be tailored to meet specific installation requirements, ensuring efficient network management in high-density setups without compromising on delivery time or quality. Additional dimensions, specifications, and CAD drawings for this 12-strand fiber optic fan-out cord can be found on its downloadable PDF datasheet. This PE3FCA756-10M fiber optic cable with a 3 mm cable diameter and 23 mm bend radius offers flexible installation options. Pasternack has one of the largest in-stock selections of MPO (w/ pins)/APC to LC/UPC fiber optic fan-out cords for international and domestic orders. Make your online purchase right now to take advantage of our same-business-day shipping. For further information on similar products, our expert technical support and knowledgeable sales team can help you get the ideal OS2 single mode fiber optic cable that meets your requirements. |
| 0 | ||
| PE3M0246-100CM | Pasternack Enterprises | Key Specifications, Connector Series 1: TNC, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Right Angle, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: N, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Right Angle, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: PE-P300LL-27478, RF Cable Type: PE-P300LL, RF Cable Impedance: 50 Ohm, Length: 39.3701 inches. Temperature Conditioned TNC Male Right Angle to N Male Right Angle Low Loss Cable 100 cm Length Using PE-P300LL Coax., Pasternack temperature conditioned TNC male right angle to N male right angle low loss cable 100 cm length using PE-P300LL coax is a high reliability RF assembly that is available for same day shipping. PE3M0246-100CM is part of one of the largest selections of same day shipping highly reliable coaxial cables for RF, microwave and mmWave interconnect applications. Pasternack hi-rel temperature conditioned coaxial cable assembly products are great choices for industries such as military / defense, telecom, industrial / commercial, utilities, etc. High reliability temperature conditioned coax cables from Pasternack are designed for applications requiring high quality and temperature consistent wire properties. These highly reliable RF assemblies are preferred for uses such as laboratory RF test and measurement, severe / harsh weather, rugged use, designed for defense / military applications, telecom antenna tower component jumper connections, commercial / industrial production environments, low loss, etc. This temperature conditioned RF cable, like our other Pasternack coaxial assemblies, will ship the same-day and any custom high reliability TNC to N type cable assembly orders will as well. Our temperature conditioned highly reliable low loss coax cable assembly is built with right angle TNC connection on one end and right angle type N connection on the other. Our low loss right angle TNC to right angle type N cable assemblies have a male gender on end 1 and male on end 2. This TNC to type N cable is a male to male coax assembly. PE3M0246-100CM can also be known as a temperature conditioned low loss right angle TNC plug to right angle type N plug cable assembly and will be shipped the same day after it is purchased. TNC plug to N type plug cable assembly PE3M0246-100CM is built with PE-P300LL which is a flexible coax. The Pasternack flexible TNC cable assembly is manufactured with right angle TNC to right angle N type cable connectors, has a 50 Ohm impedance and is triple shielded. RF specs on this temperature conditioned 18 GHz maximum frequency TNC right angle male to type N right angle male cable are located on the datasheet specifications PDF along with CAD drawing and dimensions. Also, PE3M0246-100CM can be used in the other direction and will be right angle type N male to right angle TNC male cable assembly. Pasternack high reliability low loss TNC right angle plug to type N right angle plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality TNC to N type cable assembly for same-day shipment worldwide. Variations of PE45526 TNC cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this temperature conditioned TNC male right angle to N male right angle low loss cable 100 cm length using PE-P300LL coax. |
| 0 | ||
| PE36106 | Pasternack Enterprises | 0 | ||||
 Teledyne HiRel | 5962-8766101YC | Teledyne HiRel | PROM, UV ERASABLE, 16K X 8, 90 NS ACCESS TIME | 0 | ||
5962-8766104XA | Teledyne HiRel | PROM, UV ERASABLE, 16K X 8, 170 NS ACCESS TIME RoHS : Not Compliant | 0 | |||
| 5962-8956101FA | Teledyne HiRel | BINARY COUNTER, 4-BIT SYNCHRONOUS, PRESETTABLE RoHS : Not Compliant | 0 | |||
| 5962-8766108YC | Teledyne HiRel | PROM, UV ERASABLE, 16K X 8, 70 NS ACCESS TIME | 0 | |||
5962-88726103A | Teledyne HiRel | PROG. LOGIC DEVICE, UV ERASABLE, 22-INPUT 10-OUTPUT AND-OR, 25 NS ACCESS TIME RoHS : Not Compliant | 0 | |||
| 5962-8956101EA | Teledyne HiRel | BINARY COUNTER, 4-BIT SYNCHRONOUS, PRESETTABLE RoHS : Not Compliant | 0 | |||
| 5962-87610012A | Teledyne HiRel | NAND GATE, TRIPLE 3-INPUT RoHS : Not Compliant | 0 | |||
| 5962-8766102YC | Teledyne HiRel | PROM, UV ERASABLE, 16K X 8, 120 NS ACCESS TIME | 0 | |||
| 5962-8766105XA | Teledyne HiRel | PROM, UV ERASABLE, 16K X 8, 200 NS ACCESS TIME RoHS : Not Compliant | 0 | |||
| 5962-8766108YA | Teledyne HiRel | PROM, UV ERASABLE, 16K X 8, 70 NS ACCESS TIME RoHS : Not Compliant | 0 | |||
| 5962-8766106YC | Teledyne HiRel | PROM, UV ERASABLE, 16K X 8, 250 NS ACCESS TIME | 0 | |||
| 5962-8766102XA | Teledyne HiRel | PROM, UV ERASABLE, 16K X 8, 120 NS ACCESS TIME RoHS : Not Compliant | 0 | |||
5962-8766105YA | Teledyne HiRel | PROM, UV ERASABLE, 16K X 8, 200 NS ACCESS TIME RoHS : Not Compliant | 0 | |||
| 5962-8766106YA | Teledyne HiRel | PROM, UV ERASABLE, 16K X 8, 250 NS ACCESS TIME RoHS : Not Compliant | 0 | |||
| 5962-8766101XA | Teledyne HiRel | PROM, UV ERASABLE, 16K X 8, 90 NS ACCESS TIME RoHS : Not Compliant | 0 | |||
 Venkel Ltd. | NL161008CO-R56JT | VENKEL LTD | Wire Wound Chip Inductor;1608;560nH;�5% RoHS : Compliant | 40,000 | ||
| PWCR0805-BL-2610FT | VENKEL LTD | Pulse Withstanding CR;0805;2/5W;�200PPM;261R;�1% RoHS : Compliant | 0 | |||
| AGCR2512-XK-2610FT | VENKEL LTD | Auto Grade Resistor;2512;1W;�100PPM;261R;�1% RoHS : Compliant | 0 | |||
| HPTF1206-UE-2610BT | VENKEL LTD | High Power Thin Film CR;1206;1/3W;�25PPM;261R;�0.1% RoHS : Compliant | 0 | |||
| HPTF1210-UC-2610UT | VENKEL LTD | High Power Thin Film CR;1210;1/3W;�50PPM;261R;�0.01% RoHS : Compliant | 0 | |||
| HPTF2010-UC-2610BT | VENKEL LTD | High Power Thin Film CR;2010;1/3W;�50PPM;261R;�0.1% RoHS : Compliant | 0 | |||
| MELFC0102-RC-2610DT | VENKEL LTD | MELF Coated Thin Film CR;0102;1/8W;�50PPM;261R;�0.5% RoHS : Compliant | 0 | |||
| MELFC0207-XC-2610DT | VENKEL LTD | MELF Coated Thin Film CR;0207;1W;�50PPM;261R;�0.5% RoHS : Compliant | 0 | |||
| MELFM0204-ZE-2610CT | VENKEL LTD | MELF Molded Thin Film CR;0204;2/5W;�25PPM;261R;�0.25% RoHS : Not Compliant | 0 | |||
| HPTF1206-TP-2610CT | VENKEL LTD | High Power Thin Film CR;1206;1/4W;�5PPM;261R;�0.25% RoHS : Compliant | 0 | |||
| HPTF2010-UP-2610FT | VENKEL LTD | High Power Thin Film CR;2010;1/3W;�5PPM;261R;�1% RoHS : Compliant | 0 | |||
| CR0201-20W-2610FT | VENKEL LTD | Chip Resistor;0201;1/20W;261R;�1% RoHS : Compliant | 0 | |||
| CR2010-2W-2610FT | VENKEL LTD | Chip Resistor;2010;1/2W;261R;�1% RoHS : Compliant | 0 | |||
| CRG1210-U-2610FT | VENKEL LTD | RoHS 10/10 Green CR;1210;1/3W;261R;�1% RoHS : Compliant | 0 | |||
| CMCC1206102NT | VENKEL LTD | Common Mode Choke Coil;1206;1K;�30% RoHS : Compliant | 0 | |||
 Wuhan P&S | BCP56-10T1G | onsemi | NPN Silicon Epitaxial Transistor RoHS : Compliant |
| 68,000 | |
| TSAL6102 | Vishay Intertechnologies | IR EMITTER HIGH POWR 940NM 5MM 10DEG-E3 RoHS : Compliant |
| 60,000 | ||
| RCS1206100RFKEA | Vishay Intertechnologies | RCS1206 100 100R 1% ET1 E3 RoHS : Compliant |
| 45,000 | ||
| CRCW120610K0FKEAHP | Vishay Intertechnologies | Pulse Proof, High Power Thick Film Chip Resistors��10K�� ��1% 0.75W RoHS : Compliant |
| 10,000 | ||
| SBCP56-10T1G | onsemi | - RoHS : Compliant |
| 6,000 | ||
| TSAL6100 | Vishay Intertechnologies | IR EMITTER HIGH POWR 950NM 5MM 10DEG-E3 RoHS : Compliant |
| 4,000 | ||
| FDD86102 | onsemi | 100V��36A��24m�� N-Channel Power MOSFET RoHS : Compliant |
| 2,500 | ||
| 61082-123402LF | Amphenol FCi | Bergstak: 120 Positions, Dual Row, BTB Vertical Receptacle RoHS : Compliant |
| 1,800 | ||
| 10025026-10002TLF | Amphenol FCi | PCI Express : x8 Straddle-Mount Card Edge Connector, 98 Positions, 1 mm (0.039 in.) P RoHS : Compliant |
| 1,200 | ||
| 61083-182402LF | Amphenol FCi | 180Pos,Dual Row,0.8mm,BTB Vertical Header RoHS : Compliant |
| 1,100 |
| Does ALLDATASHEET help your business so far? [ DONATE ] |
About Alldatasheet | Advertisement | Contact us | Privacy Policy | Link to Datasheet | Link Exchange | Manufacturer List All Rights Reserved짤Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |
British ▼ 
English
Chinese
German
Japanese
Russian
Korean
Spanish
French
Italian
Portuguese
Polish
Vietnamese
Indian
Mexican
New Zealand