| Electronic Components Datasheet Search |
|
6220ACNUNNTZCWC Distributor |
| Distributor | Part # | Manufacturer | Description | Price | Qty. BuyNow | |
![]() ComSIT USA | TPS62202DBVR![]() | Texas Instruments | AVAILABLE EU RoHS : Compliant | 1,614 | ||
![]() ComSIT USA | 744066220 | Adolf Wuerth Gmbh & Co Kg | SMT SHIELDED TINY POWER INDUCTOR General Purpose Inductor, 22uH, 30%, 1 Element, Manganese-zinc-Core, SMD, 3939 RoHS : Compliant | 169,495 | ||
| CRCW1206220RJNTABC | Vishay Intertechnologies | Fixed Resistor, Metal Glaze/thick Film, 0.25W, 220ohm, 200V, 5% +/-Tol, 200ppm/Cel, 1206 RoHS : Compliant | 25,000 | |||
| CRCW1206220RFKEA | Vishay Intertechnologies | STANDARD THICK FILM CHIP RESISTOR Fixed Resistor, Metal Glaze/thick Film, 0.25W, 220ohm, 200V, 1% +/-Tol, 100ppm/Cel, Surface Mount, 1206 RoHS : Compliant | 10,000 | |||
| 622034521 | TE Connectivity | RF SMB Connector, 1 Contact(s), Male, Board Mount, Solder Terminal RoHS : Compliant | 6,300 | |||
| AON6220 | Alpha & Omega Semiconductor | 100V CHANNEL POWER FIELD-EFFECT TRANSISTOR Power Field-Effect Transistor, 48A I(D), 100V, 0.0074ohm, 1-Element, N-Channel, Silicon, Metal-oxide Semiconductor FET RoHS : Compliant | 6,000 | |||
TPS562201DDCR![]() | Texas Instruments | Switching Regulator, 2A, 580kHz Switching Freq-Max, PDSO6 RoHS : Compliant | 6,000 | |||
| CAY162202F4LF | Bourns Inc | Array/Network Resistor, Isolated, 0.25W, 22000ohm, 50V, 1% +/-Tol, 200ppm/Cel, Surface Mount, 1206 RoHS : Compliant | 5,000 | |||
| 55162203451 | Stelco GMBH Electronic Components | SMT CHIP INDUCTOR General Purpose Inductor, 0.022uH, 5%, 1 Element, Ceramic-Core, SMD, 0603 RoHS : Not Compliant | 4,000 | |||
TPS62200DBVR![]() | Texas Instruments | HIGH-EFFICIENCY, SOT23 STEP-DOWN, DC-DC CONVERTER Switching Regulator, Voltage-mode, 0.3A, 1500kHz Switching Freq-Max, PDSO5 RoHS : Compliant | 2,450 | |||
TPS562209DDCR![]() | Texas Instruments | Switching Regulator, Voltage-mode, 2A, 650kHz Switching Freq-Max, BICMOS, PDSO6 RoHS : Compliant | 1,306 | |||
| TB62201AFGEL | Toshiba America Electronic Components | Stepper Motor Driver 5V 38-Pin(36+2Tab) HSOP T/R RoHS : Compliant | 392 | |||
TPS62203DBVT![]() | Texas Instruments | HIGH-EFFICIENCY, SOT23 STEP-DOWN, DC-DC CONVERTER Switching Regulator, Voltage-mode, 0.3A, 1500kHz Switching Freq-Max, PDSO5 RoHS : Compliant | 175 | |||
| 62205ANHMW1EB | Intel Corporation | Electronic Component RoHS : Compliant | 160 | |||
| 62204021000 | W+P Products GmbH | Board Stacking Connector, 40 Contact(s), 2 Row(s), Female, Straight, 0.1 inch Pitch, Solder Terminal, Locking, Socket RoHS : Compliant | 80 | |||
| PIC16C62204P | mct | EPROM-BASED 8-BIT CMOS MICROCONTROLLER RISC Microcontroller, 8-Bit, OTPROM, PIC16 CPU, 20MHz, CMOS, PDIP18 RoHS : Compliant | 8 | |||
![]() NexGen Digital | CAT16-220J4LF | Bourns Inc | RoHS : Compliant | 4,218 | ||
TPS62200DBVT![]() | Texas Instruments | RoHS : Compliant | 250 | |||
| ON622034-1 | Intersil Corporation | 52 | ||||
| CK06 220NF | Kyocera AVX Components | 35 | ||||
| 3131810622-0G44 | METZ CONNECT USA | RoHS : Compliant | 20 | |||
| 1-1658622-0 | TE Connectivity | RoHS : Compliant | 10 | |||
![]() Rutronik | CR16-2201-FY | ASJ Holdings Limited | RC0603 2,2K 1% 0,1W TK100 RoHS : Compliant |
| 6,520,000 | |
| CR16-2202-FY | ASJ Holdings Limited | RC0603 22K 1% 0,1W TK100 RoHS : Compliant |
| 2,820,000 | ||
| CR16-2203-FY | ASJ Holdings Limited | RC0603 220K 1% 0,1W TK100 RoHS : Compliant |
| 2,060,000 | ||
| CR16-220-JY | ASJ Holdings Limited | RC0603 22R 5% 0,1W TK100 RoHS : Compliant |
| 440,000 | ||
| TNPW1206220KBEEA | Vishay Intertechnologies | TF1206 220K 0,1% 0,52W TK25 RoHS : Compliant |
| 125,000 | ||
| 6220.2300 | Schurter Electronic Components | 6220 G-Connector-Kombi 10A RoHS : Compliant |
| 250 | ||
![]() Avnet Asia | AT62-20-0144 | Amphenol Corporation | (Alt: AT62-20-0144) RoHS : Compliant | 0 | ||
| QPL6220QSB | Qorvo | (Alt: QPL6220QSB) RoHS : Compliant | 0 | |||
| 10106262-2001003LF | Amphenol Corporation | (Alt: 10106262-2001003LF) RoHS : Compliant | 0 | |||
| CRCW1206220RFKEA | Vishay Intertechnologies | SMD Chip Resistor, 220 ohm, ? 1%, 250 mW, 1206 [3216 Metric], Thick Film, General Purpose (Alt: CRCW1206220RFKEA) RoHS : Compliant | 0 | |||
| AT62-20-0122 | Amphenol Corporation | (Alt: AT62-20-0122) RoHS : Compliant | 0 | |||
| AP62200Z6-7 | Diodes Incorporated | 4.2V to 18V Input 2A Low IQ Synchronous Buck Converter 6-Pin SOT-563 T/R (Alt: AP62200Z6-7) RoHS : Compliant |
| 0 | ||
| IW3622-00 | Renesas Electronics Corporation | Single-Stage, 45W, Non-Dimmable Off-Line Flyback LED Driver with High PF and Low Ripple (Alt: IW3622-00) RoHS : Compliant | 0 | |||
| 1062206854 | Molex | (Alt: 1062206854) RoHS : Compliant | 0 | |||
| 10106262-2000002LF | Amphenol Corporation | (Alt: 10106262-2000002LF) RoHS : Compliant | 0 | |||
| M39006/22-0660 | Vishay Intertechnologies | Tantalum Capacitor, 56 uF, 125 V, ? 10%, Axial Leaded, 1.8 A, 0.01 % Per 1000 Hours, 10.31 mm (Alt: M39006/22-0660) RoHS : Compliant | 0 | |||
| 6220.2300 | Schurter Electronic Components | (Alt: 6220.2300) RoHS : Compliant | 0 | |||
| 10123246-22000LF | Amphenol Corporation | (Alt: 10123246-22000LF) RoHS : Compliant | 0 | |||
| M39006/22-0625 | Vishay Intertechnologies | (Alt: M39006/22-0625) RoHS : Compliant | 0 | |||
| M39006/22-0140 | Vishay Intertechnologies | (Alt: M39006/22-0140) RoHS : Compliant | 0 | |||
| PHE450RD6220JR17L2 | KEMET Corporation | (Alt: PHE450RD6220JR17L2) RoHS : Compliant | 0 | |||
![]() Avnet Silica | AP62200WU-7 | Diodes Incorporated | DCDC Switching Regulator Adjustable Synchronous Buck Step Down Single Output 800 mV to 7 V (Alt: AP62200WU-7) RoHS : Compliant | 573,000 | ||
| AP62201WU-7 | Diodes Incorporated | (Alt: AP62201WU-7) RoHS : Compliant | 30,000 | |||
| XC6220B331PR-G | Torex Semiconductor LTD | (Alt: XC6220B331PR-G) RoHS : Compliant | 3,000 | |||
| XC6220B121ERG | Torex Semiconductor LTD | (Alt: XC6220B121ER-G) RoHS : Compliant | 0 | |||
| XC6220B331ER-G | Torex Semiconductor LTD | (Alt: XC6220B331ER-G) RoHS : Compliant | 0 | |||
| XC6220B501MR-G | Torex Semiconductor LTD | (Alt: XC6220B501MR-G) RoHS : Compliant | 0 | |||
| XC6220C351ER-G | Torex Semiconductor LTD | (Alt: XC6220C351ER-G) RoHS : Compliant | 0 | |||
| XC6220B311MR-G | Torex Semiconductor LTD | (Alt: XC6220B311MR-G) RoHS : Compliant | 0 | |||
| XC6220B191MR-G | Torex Semiconductor LTD | (Alt: XC6220B191MR-G) RoHS : Compliant | 0 | |||
| 5962-8762201FA | Teledyne HiRel | (Alt: 5962-8762201FA) RoHS : Not Compliant | 0 | |||
| XC6220B351MR-G | Torex Semiconductor LTD | (Alt: XC6220B351MR-G) RoHS : Compliant | 0 | |||
| XC6220B121MR-G | Torex Semiconductor LTD | (Alt: XC6220B121MR-G) RoHS : Compliant | 0 | |||
| XC6220B182PR-G | Torex Semiconductor LTD | TORXC6220B182PRG (Alt: XC6220B182PR-G) RoHS : Compliant | 0 | |||
| SMJD-3622012F-X41500D95C057ALL | Seoul Semiconductor | DC MODULE 2X4 ZHAGA BOOK 15PACKAGE 5050LES COB22WLUMEN 3950CCT 5000K CRI705 STEP (Alt: SMJD-3622012F-X41500D95C057ALL) RoHS : Compliant | 0 | |||
| SMJD-3622012F-XX1500D95C057ALL | Seoul Semiconductor | DC Module 2X6 zhaga book 153950 Lumen225WCCT 5000KCRI705 STEP (Alt: SMJD-3622012F-XX1500D95C057ALL) RoHS : Compliant | 0 | |||
![]() Braemac Americas-Symmetry | ACHL-62.208MHZ-LR-A-Q25 | Abracon Corporation | RoHS : Compliant |
| 0 | |
AX5DAF1-622.0800T![]() | Abracon Corporation | RoHS : Compliant |
| 0 | ||
AX7DAF1-622.0800T![]() | Abracon Corporation | XTAL OSC XO 622.0800MHZ LVDS SMD RoHS : Compliant |
| 0 | ||
AIRD-06-220K![]() | Abracon Corporation | RoHS : Compliant |
| 0 | ||
ASG-D-X-A-622.08MHZ-T![]() | Abracon Corporation | XTAL OSC XO 622.0800MHZ LVDS SMD RoHS : Compliant |
| 0 | ||
ASG-D-V-A-622.08MHZ-T![]() | Abracon Corporation | XTAL OSC VCXO 622.0800MHZ LVDS RoHS : Compliant |
| 0 | ||
ASG-P-X-A-622.08MHZ-T![]() | Abracon Corporation | XTAL OSC XO 622.0800MHZ LVPECL RoHS : Compliant |
| 0 | ||
AIML-1206-220K-T![]() | Abracon Corporation | RoHS : Compliant |
| 0 | ||
AX7DAF1-622.0000T![]() | Abracon Corporation | XTAL OSC XO 622.0000MHZ LVDS SMD RoHS : Compliant |
| 0 | ||
| 32-0162-20 | Calian |
| 0 | |||
AIUR-06-220K![]() | Abracon Corporation | RoHS : Compliant |
| 0 | ||
![]() Component Electronics, Inc | 2322-704-62202L | YAGEO Corporation | IN STOCK SHIP TODAY |
| 32,968 | |
| RMC1/16-220-1%-R | SEI Stackpole Electronics Inc | IN STOCK SHIP TODAY |
| 20,000 | ||
| RMC1/16-220R-5% | SEI Stackpole Electronics Inc | IN STOCK SHIP TODAY |
| 4,000 | ||
| RMCF1/16-220K-5%-R | SEI Stackpole Electronics Inc | IN STOCK SHIP TODAY |
| 2,300 | ||
| 2-1622000-4 | Neohm Componenti srl | IN STOCK SHIP TODAY |
| 970 | ||
| 4-1622000-2 | Neohm Componenti srl | IN STOCK SHIP TODAY |
| 940 | ||
| 3-1622000-7 | Neohm Componenti srl | IN STOCK SHIP TODAY |
| 915 | ||
IPM6220ACA![]() | Intersil Corporation | IN STOCK SHIP TODAY RoHS : Not Compliant |
| 778 | ||
| 2322-704-62201L | YAGEO Corporation | IN STOCK SHIP TODAY |
| 500 | ||
| 1-1622000-5 | Neohm Componenti srl | IN STOCK SHIP TODAY |
| 230 | ||
| 1062-20-0222 | TE Connectivity | IN STOCK SHIP TODAY RoHS : Compliant |
| 50 | ||
| M39006/22-0280 | Mallory Sonalert Products Inc | IN STOCK SHIP TODAY |
| 13 | ||
| M39006/22-0560 | Vishay Sprague | IN STOCK SHIP TODAY RoHS : Not Compliant |
| 4 | ||
| 6220-00-010-3982 | IN STOCK SHIP TODAY | 4 | ||||
| M39006/22-0562 | Vishay Sprague | IN STOCK SHIP TODAY RoHS : Not Compliant |
| 3 | ||
![]() DB Roberts | 62-20-15 | Southco |
| 100 | ||
| 82-16-220-16 | Southco | The simplicity of a quarter turn is all it takes to secure panels quickly and easily with these versatile little fasteners. Numerous head styles stud lengths receptacle styles and accessories provide flexibility for accommodating many specific mountin |
| 3 | ||
| 064362201237E | Essentra Components | 0 | ||||
| 0622091E | Essentra Components | 0 | ||||
| D3-316-220-191 | Southco | D3-316-220-191 | 0 | |||
| 47-62-201-62 | Southco | Southco 47 Class captive screws offer hundreds of permutations of installation and tool-actuation styles for mounting doors panels and other hardware components in limited-space applications. | 0 | |||
| AC-CKK1-6-2200-054 | Southco | 0 | ||||
| 62-20-23 | Southco | 0 | ||||
| 4362200 | SHEREX FASTENING SO | 0 | ||||
| 62-20-13 | Southco | 0 | ||||
| 3262200/SN | Sugatsune Kogyo Co Ltd | ZINC ALLOY FLUSH PULL | 0 | |||
| 3622042 | Essentra Components | QUARTER TURN - WING KNOB | 0 | |||
| 0622090E | Essentra Components | 0 | ||||
| 47-62-201-22 | Southco | Southco 47 Class captive screws offer hundreds of permutations of installation and tool-actuation styles for mounting doors panels and other hardware components in limited-space applications. | 0 | |||
| 0622092E | Essentra Components | 0 | ||||
![]() EBV Elektronik | S00016220057 | SIMCom | BAC BTB 6PIN PLUG RO (Alt: S00016220057) RoHS : Compliant | 0 | ||
| ASSR-V622-002E | Broadcom Limited | MOSFET Relay 375 kV 30 mA (Alt: ASSR-V622-002E) RoHS : Compliant | 0 | |||
| TB62206FG(O,EL) | Toshiba America Electronic Components | 2Phase Stepping Motor Driver 5V 22Pin202Tab HSOP TR (Alt: TB62206FG(O,EL)) RoHS : Compliant | 0 | |||
| TB62209FG(O,EL) | Toshiba America Electronic Components | Stepper Motor Driver 5V 38Pin362Tab HSOP TR (Alt: TB62209FG(O,EL)) RoHS : Compliant | 0 | |||
| TB62208FTG(O,C8,EL | Toshiba America Electronic Components | (Alt: TB62208FTG(O,C8,EL) RoHS : Compliant | 0 | |||
| C16220_STRADELLA-16-T1-A | LEDIL | Rectangle Lens Array for LUXEON 3030 2DNFSx757G Series LEDS (Alt: C16220_STRADELLA-16-T1-A) RoHS : Compliant | 0 | |||
![]() Neutron USA | 16220-3 | Eaton Bussmann | Power Distribution Block, 175 A, 600V, 3-Pole, Magnum 160 and 162 Series RoHS : Unknown |
| 50 | |
| 6220.2100 | Schurter Electronic Components | AC Power Entry Modules SCREW-ON 2-POLE SLDR Socket and fusedraw RoHS : Compliant |
| 50 | ||
| VPS36-2200 | Triad Magnetics | Power Transformers POWER XFMR 36.0Vct at 2.2A UL/CSA/VDE CHASSIS MOUNT/VPS36-2200 RoHS : Compliant |
| 47 | ||
| 82-4162.2000.B001 | EAO AG | Pushbutton Switches 82-4162.2000.B001.pushbutton.maintained.16 mm.stainless steel.flush/raised.no LED.no colour.no LED.screw terminal.On OFF RoHS : Compliant |
| 6 | ||
| MPDB62201 | Mersen Electrical Power | Power Distribution Block,Open Style,Copper,Stud-Stud,1P,1000VAC/DC,240A |
| 4 | ||
| AF16-22-00-12 | ABB Low Voltage Products and Systems | AF16 4 Pole Contactor, 30 A, 7.5 kW, 48 - 130 V ac/dc Coil |
| 0 | ||
| AF16-22-00-11 | ABB Low Voltage Products and Systems | AF16 4 Pole Contactor; 30 A; 20 - 60 V dc; 24 - 60 V ac Coil |
| 0 | ||
| 82862205 | Crouzet | AC, DC & Servo Motors 24VDC AP 931:1 |
| 0 | ||
CFM-4020BG-1140-462-20![]() | Same Sky | DC Fans dc axial fan, 40 mm square, 20 mm, 12 Vdc, ball, 14000 RPM, 16.48 CFM, TS RoHS : Compliant |
| 0 | ||
| CFM-4020BG-1140-462-20 | CUI Inc | DC Axial Fan, Sq40x20 mm, 12Vdc 0.5A, ball, 14000 RPM, 17.5 CFM, TS, 3wire |
| 0 | ||
| TAL262200RT-51 | ABB Low Voltage Products and Systems | Contactor, TAL26 2NO-2NC RT 17-32VDC |
| 0 | ||
CUSA-TR60-06-2200-W68![]() | Same Sky | Proximity Sensors ulstrasonic transceiver, aluminum, 60 degrees, 6M range, IP68, wire leads RoHS : Compliant |
| 0 | ||
| 6220.5225 | Schurter Electronic Components | AC Power Entry Modules Appliance Inlet 65C W. 2P RoHS : Compliant |
| 0 | ||
| B6-22-00-02 | ABB Low Voltage Products and Systems | Mini Contactor, 4P, M: 2NO 2NC, Aux:0/0, Control: 42VAC, MC: 690VAC, GJL1211501R0002 |
| 0 | ||
| B6-22-00-84 | ABB Low Voltage Products and Systems | B6 4P CONTR 2NO-2NC 120V |
| 0 | ||
![]() Pasternack Enterprises US | PE3W06662-200CM | Pasternack Enterprises | Key Specifications, Connector Series 1: QMA, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Right Angle, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: SMA, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: LMR-195, RF Cable Type: LMR-195, RF Cable Impedance: 50 Ohm, Length: 78.74 inches. QMA Male Right Angle to SMA Male Cable 200 cm Length Using LMR-195 Coax., Radio frequency assembly QMA male right angle to SMA male cable 200 cm length using LMR-195 coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. QMA male right angle to SMA male cable 200 cm length using LMR-195 coax, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom QMA to SMA cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with right angle QMA cable connection on one end and SMA cable connection on the other. Our right angle QMA to SMA cable assemblies have a male gender on end 1 and male on end 2. This QMA to SMA cable is a male to male coax assembly, PE3W06662-200CM, can also be known as a right angle QMA plug to SMA plug cable assembly and will be shipped same-day as it is purchased. QMA plug to SMA plug cable assembly PE3W06662-200CM is built with LMR-195 which is a flexible coax type. The Pasternack flexible QMA cable assembly is manufactured with right angle QMA to SMA cable connectors, has a 50 Ohm impedance and is double shielded. RF specs on this 4 GHz maximum frequency QMA right angle male to SMA male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3W06662-200CM can also be used in the other direction and will be SMA male to right angle QMA male cable assembly if the opposite connectivity is required. QMA right angle plug to SMA plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality QMA to SMA cable assembly for quick shipment worldwide. Variations of QMA cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this QMA male right angle to SMA male cable 200 cm length using LMR-195 coax. |
| 233 | |
| PE3W14562-200CM | Pasternack Enterprises | Key Specifications, Connector 1 Series: BNC, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Right Angle, Connector 1 Impedance: 50 Ohm, Connector 2 Series: BNC, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Right Angle, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: LMR-100A-UF, RF Cable Type: LMR-100A-UF, RF Cable Impedance: 50 Ohm, Length, Max: 78.7402 inches. BNC Male Right Angle to BNC Male Right Angle Low Loss Cable 200 CM Length Using LMR-100A-UF Coax., Radio frequency assembly BNC male right angle to BNC male right angle low loss cable 200 cm length using LMR-100A-UF coax from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The BNC male right angle to BNC male right angle low loss cable 200 cm length using LMR-100A-UF coax, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom BNC to BNC cable assembly orders will ship the same business day as well. Pasternack RF coax low loss cable assembly is built with a right angle BNC cable connection on one end and a right angle BNC cable connection on the other. Our low loss right angle BNC to right angle BNC cable assembly has a male gender on end 1 and a male on end 2. PE3W14562-200CM can also be known as a low loss right angle BNC plug to right angle BNC plug cable assembly and will be shipped the same day as it is purchased. This flexible RF cable assembly with a 0.5-inch diameter has copper as the cable's inner conducting material and PE dielectric type. This cable assembly employs durable and flexible materials, and with a 1-inch bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. Our PE3W14562-200CM RF cable has a TPE jacket of 0.110-inch diameter. This radio frequency cable assembly can withstand temperatures ranging from -40 to 85 degrees C. The flexible RF cable has an in-series connection. This cable assembly has a typical propagation velocity of 66% and a minimum RF shielding of 90 dB. Our right angle BNC male to right angle BNC male cable has a maximum VSWR of 1.4:1. BNC plug to BNC plug cable assembly PE3W14562-200CM is built with LMR-100A-UF which is a flexible coax type. The Pasternack flexible BNC cable assembly is manufactured with right angle BNC to right angle BNC cable connectors, has a 50 Ohm impedance, and is double shielded. Both the connectors have a crimp/solder attachment method and a brass body with nickel plating. Additional dimensions, specifications and CAD drawings for this low loss RF cable are available on our downloadable PDF datasheet. Low loss BNC right angle plug to BNC right angle plug cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality BNC to BNC cable assembly for quick shipment worldwide. Variations of BNC cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal BNC to BNC low loss RF cable assembly as per your requirements. LMR® is a registered trademark of Times Microwave Systems. |
| 217 | ||
| PE3M0062-200CM | Pasternack Enterprises | Key Specifications, Connector Series 1: BNC, Connector Gender 1: Male, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: SMA, Connector Gender 2: Male, Connector Angle 2: Right Angle, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: M17/128-RG400-27478, RF Cable Type: M17/128-RG400, RF Cable Impedance: 50 Ohm, Length: 78.7402 inches. MIL-DTL-17 BNC Male to SMA Male Right Angle Cable 200 cm Length Using M17/128-RG400 Coax., Radio frequency assembly MIL-DTL-17 BNC male to SMA male right angle cable 200 cm length using M17/128-RG400 coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack MIL-DTL-17 (also referenced as MIL-C-17) coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. MIL-DTL-17 BNC male to SMA male right angle cable 200 cm length using M17/128-RG400 coax, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom M39012/16-0014 BNC to M39012/56-3109 SMA cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with M39012/16-0014 BNC cable connection on one end and right angle M39012/56-3109 SMA cable connection on the other. Our M39012/16-0014 BNC to right angle M39012/56-3109 SMA cable assemblies have a male gender on end 1 and male on end 2. This M39012/16-0014 BNC to M39012/56-3109 SMA cable is a male to male coax assembly, PE3M0062-200CM, can also be known as a MIL-DTL-17/MIL-C-17 M39012/16-0014 BNC plug to right angle M39012/56-3109 SMA plug cable assembly and will be shipped same-day as it is purchased. M39012/16-0014 BNC plug to M39012/56-3109 SMA plug cable assembly PE3M0062-200CM is built with M17/128-RG400 which is a flexible coax type. The Pasternack flexible M39012/16-0014 BNC cable assembly is manufactured with M39012/16-0014 BNC to right angle M39012/56-3109 SMA cable connectors, has a 50 Ohm impedance and is double shielded. RF specs on this MIL-C-17 4 GHz maximum frequency M39012/16-0014 BNC male to M39012/56-3109 SMA right angle male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3M0062-200CM can also be used in the other direction and will be right angle M39012/56-3109 SMA male to M39012/16-0014 BNC male cable assembly if the opposite connectivity is required. M39012/16-0014 BNC plug to M39012/56-3109 SMA right angle plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality M39012/16-0014 BNC to M39012/56-3109 SMA cable assembly for quick shipment worldwide. Variations of M39012/16-0014 BNC cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this MIL-DTL-17 BNC male to SMA male right angle cable 200 cm length using M17/128-RG400 coax. |
| 86 | ||
| PE3C6220-48 | Pasternack Enterprises | Key Specifications, Connector Series 1: 4.3-10, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: N, Connector Gender 2: Female, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: SPP-250-LLPL, RF Cable Type: SPP-250-LLPL, RF Cable Impedance: 50 Ohm, Length: 48 inches. Plenum 4.3-10 Male to N Female Low PIM Cable 48 Inch Length Using SPP-250-LLPL Coax Using Times Microwave Parts., Radio frequency assembly plenum 4.3-10 male to N female low PIM cable 48 inch length using SPP-250-LLPL coax using Times Microwave parts from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack low PIM (Passive Intermodulation, also called Intermod for short) coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. Plenum 4.3-10 male to N female low PIM cable 48 inch length using SPP-250-LLPL coax using Times Microwave parts, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom TC-250-4310M-LP 4.3-10 to TC-SPP250-NF-LP N type cable assembly orders will ship same day as well. Pasternack RF coax low PIM cable assembly is built with TC-250-4310M-LP 4.3-10 cable connection on one end and TC-SPP250-NF-LP type N cable connection on the other. Our low PIM TC-250-4310M-LP 4.3-10 to TC-SPP250-NF-LP type N cable assemblies have a male gender on end 1 and female on end 2. This TC-250-4310M-LP 4.3-10 to TC-SPP250-NF-LP N type cable is a male to female coax assembly, PE3C6220-48, can also be known as a low PIM TC-250-4310M-LP 4.3-10 plug to TC-SPP250-NF-LP type N jack cable assembly and will be shipped same-day as it is purchased. TC-250-4310M-LP 4.3-10 plug to TC-SPP250-NF-LP type N jack cable assembly PE3C6220-48 is built with SPP-250-LLPL which is a corrugated coax type. The Pasternack low passive intermodulation corrugated TC-250-4310M-LP 4.3-10 cable assembly is manufactured with TC-250-4310M-LP 4.3-10 to TC-SPP250-NF-LP type N cable connectors, has a 50 Ohm impedance and is single shielded. RF specs on this 5.8 GHz maximum frequency low PIM TC-250-4310M-LP 4.3-10 male to TC-SPP250-NF-LP N type female cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3C6220-48 can also be used in the other direction and will be TC-SPP250-NF-LP type N female to TC-250-4310M-LP 4.3-10 male cable assembly if the opposite connectivity is required. Low PIM TC-250-4310M-LP 4.3-10 plug to TC-SPP250-NF-LP type N jack cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality TC-250-4310M-LP 4.3-10 to TC-SPP250-NF-LP type N cable assembly for quick shipment worldwide. Variations of TC-250-4310M-LP 4.3-10 cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this plenum 4.3-10 male to N female low PIM cable 48 inch length using SPP-250-LLPL coax using Times Microwave parts. |
| 84 | ||
| PE3C6220-24 | Pasternack Enterprises | Key Specifications, Connector Series 1: 4.3-10, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: N, Connector Gender 2: Female, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: SPP-250-LLPL, RF Cable Type: SPP-250-LLPL, RF Cable Impedance: 50 Ohm, Length: 24 inches. Plenum 4.3-10 Male to N Female Low PIM Cable 24 Inch Length Using SPP-250-LLPL Coax Using Times Microwave Parts., Radio frequency assembly plenum 4.3-10 male to N female low PIM cable 24 inch length using SPP-250-LLPL coax using Times Microwave parts from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack low PIM (Passive Intermodulation, also called Intermod for short) coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. Plenum 4.3-10 male to N female low PIM cable 24 inch length using SPP-250-LLPL coax using Times Microwave parts, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom TC-250-4310M-LP 4.3-10 to TC-SPP250-NF-LP type N cable assembly orders will ship same day as well. Pasternack RF coax low PIM cable assembly is built with TC-250-4310M-LP 4.3-10 cable connection on one end and TC-SPP250-NF-LP type N cable connection on the other. Our low PIM TC-250-4310M-LP 4.3-10 to TC-SPP250-NF-LP N type cable assemblies have a male gender on end 1 and female on end 2. This TC-250-4310M-LP 4.3-10 to TC-SPP250-NF-LP type N cable is a male to female coax assembly, PE3C6220-24, can also be known as a low PIM TC-250-4310M-LP 4.3-10 plug to TC-SPP250-NF-LP N type jack cable assembly and will be shipped same-day as it is purchased. TC-250-4310M-LP 4.3-10 plug to TC-SPP250-NF-LP type N jack cable assembly PE3C6220-24 is built with SPP-250-LLPL which is a corrugated coax type. The Pasternack low passive intermodulation corrugated TC-250-4310M-LP 4.3-10 cable assembly is manufactured with TC-250-4310M-LP 4.3-10 to TC-SPP250-NF-LP N type cable connectors, has a 50 Ohm impedance and is single shielded. RF specs on this 5.8 GHz maximum frequency low PIM TC-250-4310M-LP 4.3-10 male to TC-SPP250-NF-LP type N female cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3C6220-24 can also be used in the other direction and will be TC-SPP250-NF-LP type N female to TC-250-4310M-LP 4.3-10 male cable assembly if the opposite connectivity is required. Low PIM TC-250-4310M-LP 4.3-10 plug to TC-SPP250-NF-LP type N jack cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality TC-250-4310M-LP 4.3-10 to TC-SPP250-NF-LP type N cable assembly for quick shipment worldwide. Variations of TC-250-4310M-LP 4.3-10 cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this plenum 4.3-10 male to N female low PIM cable 24 inch length using SPP-250-LLPL coax using Times Microwave parts. |
| 84 | ||
| PE3C6220-100CM | Pasternack Enterprises | Key Specifications, Connector Series 1: 4.3-10, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: N, Connector Gender 2: Female, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: SPP-250-LLPL, RF Cable Type: SPP-250-LLPL, RF Cable Impedance: 50 Ohm, Length: 39.3701 inches. Plenum 4.3-10 Male to N Female Low PIM Cable 100 cm Length Using SPP-250-LLPL Coax Using Times Microwave Parts., Radio frequency assembly plenum 4.3-10 male to N female low PIM cable 100 cm length using SPP-250-LLPL coax using Times Microwave parts from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack low PIM (Passive Intermodulation, also called Intermod for short) coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. Plenum 4.3-10 male to N female low PIM cable 100 cm length using SPP-250-LLPL coax using Times Microwave parts, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom TC-250-4310M-LP 4.3-10 to TC-SPP250-NF-LP type N cable assembly orders will ship same day as well. Pasternack RF coax low PIM cable assembly is built with TC-250-4310M-LP 4.3-10 cable connection on one end and TC-SPP250-NF-LP N type cable connection on the other. Our low PIM TC-250-4310M-LP 4.3-10 to TC-SPP250-NF-LP type N cable assemblies have a male gender on end 1 and female on end 2. This TC-250-4310M-LP 4.3-10 to TC-SPP250-NF-LP type N cable is a male to female coax assembly, PE3C6220-100CM, can also be known as a low PIM TC-250-4310M-LP 4.3-10 plug to TC-SPP250-NF-LP type N jack cable assembly and will be shipped same-day as it is purchased. TC-250-4310M-LP 4.3-10 plug to TC-SPP250-NF-LP N type jack cable assembly PE3C6220-100CM is built with SPP-250-LLPL which is a corrugated coax type. The Pasternack low passive intermodulation corrugated TC-250-4310M-LP 4.3-10 cable assembly is manufactured with TC-250-4310M-LP 4.3-10 to TC-SPP250-NF-LP N type cable connectors, has a 50 Ohm impedance and is single shielded. RF specs on this 5.8 GHz maximum frequency low PIM TC-250-4310M-LP 4.3-10 male to TC-SPP250-NF-LP type N female cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3C6220-100CM can also be used in the other direction and will be TC-SPP250-NF-LP type N female to TC-250-4310M-LP 4.3-10 male cable assembly if the opposite connectivity is required. Low PIM TC-250-4310M-LP 4.3-10 plug to TC-SPP250-NF-LP type N jack cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality TC-250-4310M-LP 4.3-10 to TC-SPP250-NF-LP type N cable assembly for quick shipment worldwide. Variations of TC-250-4310M-LP 4.3-10 cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this plenum 4.3-10 male to N female low PIM cable 100 cm length using SPP-250-LLPL coax using Times Microwave parts. |
| 84 | ||
| PE3C6220-36 | Pasternack Enterprises | Key Specifications, Connector Series 1: 4.3-10, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: N, Connector Gender 2: Female, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: SPP-250-LLPL, RF Cable Type: SPP-250-LLPL, RF Cable Impedance: 50 Ohm, Length: 36 inches. Plenum 4.3-10 Male to N Female Low PIM Cable 36 Inch Length Using SPP-250-LLPL Coax Using Times Microwave Parts., Radio frequency assembly plenum 4.3-10 male to N female low PIM cable 36 inch length using SPP-250-LLPL coax using Times Microwave parts from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack low PIM (Passive Intermodulation, also called Intermod for short) coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. Plenum 4.3-10 male to N female low PIM cable 36 inch length using SPP-250-LLPL coax using Times Microwave parts, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom TC-250-4310M-LP 4.3-10 to TC-SPP250-NF-LP type N cable assembly orders will ship same day as well. Pasternack RF coax low PIM cable assembly is built with TC-250-4310M-LP 4.3-10 cable connection on one end and TC-SPP250-NF-LP type N cable connection on the other. Our low PIM TC-250-4310M-LP 4.3-10 to TC-SPP250-NF-LP N type cable assemblies have a male gender on end 1 and female on end 2. This TC-250-4310M-LP 4.3-10 to TC-SPP250-NF-LP type N cable is a male to female coax assembly, PE3C6220-36, can also be known as a low PIM TC-250-4310M-LP 4.3-10 plug to TC-SPP250-NF-LP N type jack cable assembly and will be shipped same-day as it is purchased. TC-250-4310M-LP 4.3-10 plug to TC-SPP250-NF-LP type N jack cable assembly PE3C6220-36 is built with SPP-250-LLPL which is a corrugated coax type. The Pasternack low passive intermodulation corrugated TC-250-4310M-LP 4.3-10 cable assembly is manufactured with TC-250-4310M-LP 4.3-10 to TC-SPP250-NF-LP type N cable connectors, has a 50 Ohm impedance and is single shielded. RF specs on this 5.8 GHz maximum frequency low PIM TC-250-4310M-LP 4.3-10 male to TC-SPP250-NF-LP type N female cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3C6220-36 can also be used in the other direction and will be TC-SPP250-NF-LP N type female to TC-250-4310M-LP 4.3-10 male cable assembly if the opposite connectivity is required. Low PIM TC-250-4310M-LP 4.3-10 plug to TC-SPP250-NF-LP type N jack cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality TC-250-4310M-LP 4.3-10 to TC-SPP250-NF-LP type N cable assembly for quick shipment worldwide. Variations of TC-250-4310M-LP 4.3-10 cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this plenum 4.3-10 male to N female low PIM cable 36 inch length using SPP-250-LLPL coax using Times Microwave parts. |
| 84 | ||
| PEWAN062-20 | Pasternack Enterprises | Key Specifications, Waveguide Size: WR-62, Frequency, Min: 12.4 GHz, Frequency, Max: 18 GHz, Beam Width V: 17.3, Beam Width H: 17.5. WR-62 Waveguide Antenna, 12.4 GHz to 18 GHz Frequency Range, 20 dBi Gain,. Pasternack’s PEWAN062-20 WR-62 waveguide horn is also known as a waveguide horn antenna. This WR-62 waveguide antenna has a nominal gain of 20 dBi. Our waveguide horn can operate at frequencies ranging from 12.4 to 18 GHz. The antenna with linear polarization has a typical VSWR of 1.3:1 and is suitable for test and measurement industries. Our WR-62 waveguide horn antenna has a typical vertical beam width of 17.3 degrees and a horizontal beam width of 17.5 degrees at 3 dB. Our antenna comes with a None square cover flange and is built to precise microwave and millimeter wave horn antenna design specifications. This WR-62 antenna has an aluminum body. Additional dimensions and specifications for this antenna are on our downloadable PDF datasheet. This WR-62 waveguide horn antenna with 20 dBi gain is part of over one million RF, microwave, and millimeter wave components available from Pasternack. Our horn antenna can ship worldwide on the same business day as it is purchased with our other available RF parts. For further information on similar products, our expert technical support and knowledgeable sales team can help you get the ideal waveguide horn that meets your requirements. |
| 19 | ||
| PEWAN062-20ELSF | Pasternack Enterprises | Key Specifications, Waveguide Size: WR-62, Gain Min: 20, Beam Width, 3dB V: 17.3, Beam Width, 3dB H: 17.5, Frequency, Min: 12.4 GHz, Frequency, Max: 18 GHz. WR-62 Standard Gain Horn with 20 dBi gain, End Launch SMA Female connector. The PEWAN062-20ELSF standard gain horn antenna (also known as a waveguide horn antenna) is part of our huge selection of waveguide antennas. Pasternack’s standard gain horn antenna is manufactured with a WR-62 input and a waveguide to coaxial transition adapter. Our WR-62 waveguide antenna features an SMA female connector. This antenna is suitable for applications such as antenna measurements, wireless communication, laboratory use, microwave radio systems, radome testing, automotive antenna test solutions, radar cross section and satellite antenna testing. Our WR-62 standard gain horn antenna with an SMA female input has a minimum frequency of 12.4 GHz and a maximum frequency of 18 GHz. Pasternack’s PEWAN062-20ELSF waveguide horn antenna has a typical gain of 20 dBi. Our waveguide antenna has a typical vertical beam width of 17.3 degrees and a horizontal beam width of 17.5 degrees at 3 dB. This antenna has a length of 7.81 inches, a width of 3.04 inches, and a weight of 0.46 lbs. This WR-62 waveguide horn antenna with 20 dBi gain is part of over one million RF, microwave, and millimeter wave components available from Pasternack. Additional dimensions and specifications for this antenna are available on our downloadable PDF datasheet. Our standard gain horn antenna with an SMA female interface can ship worldwide the same business day that it is purchased, as with our other available RF parts. For further information on similar products, our expert technical support and knowledgeable sales team can help you get the ideal waveguide horn that meets your requirements. |
| 9 | ||
| PEWAN062-20NM | Pasternack Enterprises | Key Specifications, Waveguide Size: WR-62, Gain Min: 20, Beam Width, 3dB V: 17.3, Beam Width, 3dB H: 17.5, Frequency, Min: 12.4 GHz, Frequency, Max: 18 GHz. WR-62 Standard Gain Horn with 20 dBi gain, N Male connector. The PEWAN062-20NM standard gain horn antenna (also known as a waveguide horn antenna) is part of our huge selection of waveguide antennas. Pasternack’s standard gain horn antenna is manufactured with a WR-62 input and a waveguide to coaxial transition adapter. Our WR-62 waveguide antenna features a type N male connector. This antenna is suitable for applications such as antenna measurements, wireless communication, laboratory use, microwave radio systems, radome testing, automotive antenna test solutions, radar cross section and satellite antenna testing. Our WR-62 standard gain horn antenna with a type N male input has a minimum frequency of 12.4 GHz and a maximum frequency of 18 GHz. Pasternack’s PEWAN062-20NM waveguide horn antenna has a typical gain of 20 dBi. Our waveguide antenna has a typical vertical beam width of 17.3 degrees and a horizontal beam width of 17.5 degrees at 3 dB. This antenna has a length of 7.81 inches, a width of 3.04 inches, and a weight of 0.45 lbs. This WR-62 waveguide horn antenna with 20 dBi gain is part of over one million RF, microwave, and millimeter wave components available from Pasternack. Additional dimensions and specifications for this antenna are available on our downloadable PDF datasheet. Our standard gain horn antenna with a type N male interface can ship worldwide the same business day that it is purchased, as with our other available RF parts. For further information on similar products, our expert technical support and knowledgeable sales team can help you get the ideal waveguide horn that meets your requirements. |
| 2 | ||
| PE3WAN062-20SF | Pasternack Enterprises | Key Specifications, Waveguide Size: WR-62, Gain Min: 20, Beam Width, 3dB V: 17.3, Beam Width, 3dB H: 17.5, Frequency, Min: 12.4 GHz, Frequency, Max: 18 GHz. WR-62 Standard Gain Horn with 20 dBi Gain, SMA Female Connector with Weather Resistant Radome Cover. The PE3WAN062-20SF standard gain horn antenna (also known as a waveguide horn antenna) is part of our huge selection of waveguide antennas. Pasternack’s standard gain horn antenna is manufactured with a weather-resistant radome cover and a waveguide to coaxial transition adapter. Our WR-62 waveguide antenna features an SMA female connector. This antenna is suitable for applications such as antenna measurements, wireless communication, laboratory use, microwave radio systems, radome testing, automotive antenna test solutions, radar cross section and satellite antenna testing. Our WR-62 standard gain horn antenna with an SMA female input has a minimum frequency of 12.4 GHz and a maximum frequency of 18 GHz. Pasternack’s PE3WAN062-20SF waveguide horn antenna with a weather-resistant radome cover has a typical gain of 20 dBi. Our waveguide antenna has a typical vertical beam width of 17.3 degrees and a horizontal beam width of 17.5 degrees at 3 dB. This antenna has a length of 7.5 inches, a width of 3.04 inches, and a weight of 0.4 lbs. This WR-62 waveguide horn antenna with 20 dBi gain is part of over one million RF, microwave, and millimeter wave components available from Pasternack. Additional dimensions and specifications for this antenna are available on our downloadable PDF datasheet. Our standard gain horn antenna with an SMA female interface can ship worldwide the same business day that it is purchased, as with our other available RF parts. For further information on similar products, our expert technical support and knowledgeable sales team can help you get the ideal waveguide horn that meets your requirements. |
| 2 | ||
| PE1WAN062-20NF | Pasternack Enterprises | Key Specifications, Waveguide Size: WR-62, Gain Min: 20, Beam Width, 3dB V: 17.3, Beam Width, 3dB H: 17.5, Frequency, Min: 12.4 GHz, Frequency, Max: 18 GHz. WR-62 Standard Gain Horn with 20 dBi gain, N Female connector, Integrated Cage-Style Mount. The PE1WAN062-20NF standard gain horn antenna (also known as a waveguide horn antenna) is part of our huge selection of waveguide antennas. Pasternack’s standard gain horn antenna is manufactured with a WR-62 input and a waveguide to coaxial transition adapter. Our WR-62 waveguide antenna features a type N female connector. This antenna is suitable for applications such as antenna measurements, wireless communication, laboratory use, microwave radio systems, radome testing, automotive antenna test solutions, radar cross section and satellite antenna testing. Our WR-62 standard gain horn antenna with a type N female input has a minimum frequency of 12.4 GHz and a maximum frequency of 18 GHz. Pasternack’s PE1WAN062-20NF waveguide horn antenna has a typical gain of 20 dBi. Our waveguide antenna has a typical vertical beam width of 17.3 degrees and a horizontal beam width of 17.5 degrees at 3 dB. This antenna has a length of 12.53 inches, a width of 7.76 inches, and a weight of 1.11 lbs. This WR-62 waveguide horn antenna with 20 dBi gain is part of over one million RF, microwave, and millimeter wave components available from Pasternack. Additional dimensions and specifications for this antenna are available on our downloadable PDF datasheet. Our standard gain horn antenna with a type N female interface can ship worldwide the same business day that it is purchased, as with our other available RF parts. For further information on similar products, our expert technical support and knowledgeable sales team can help you get the ideal waveguide horn that meets your requirements. |
| 0 | ||
| PE1WAN062-20SM | Pasternack Enterprises | Key Specifications, Waveguide Size: WR-62, Gain Min: 20, Beam Width, 3dB V: 17.3, Beam Width, 3dB H: 17.5, Frequency, Min: 12.4 GHz, Frequency, Max: 18 GHz. WR-62 Standard Gain Horn with 20 dBi gain, SMA Male connector, Integrated Cage-Style Mount. The PE1WAN062-20SM standard gain horn antenna (also known as a waveguide horn antenna) is part of our huge selection of waveguide antennas. Pasternack’s standard gain horn antenna is manufactured with a WR-62 input and a waveguide to coaxial transition adapter. Our WR-62 waveguide antenna features an SMA male connector. This antenna is suitable for applications such as antenna measurements, wireless communication, laboratory use, microwave radio systems, radome testing, automotive antenna test solutions, radar cross section and satellite antenna testing. Our WR-62 standard gain horn antenna with an SMA male input has a minimum frequency of 12.4 GHz and a maximum frequency of 18 GHz. Pasternack’s PE1WAN062-20SM waveguide horn antenna has a typical gain of 20 dBi. Our waveguide antenna has a typical vertical beam width of 17.3 degrees and a horizontal beam width of 17.5 degrees at 3 dB. This antenna has a length of 12.22 inches, a width of 7.76 inches, and a weight of 1.08 lbs. This WR-62 waveguide horn antenna with 20 dBi gain is part of over one million RF, microwave, and millimeter wave components available from Pasternack. Additional dimensions and specifications for this antenna are available on our downloadable PDF datasheet. Our standard gain horn antenna with an SMA male interface can ship worldwide the same business day that it is purchased, as with our other available RF parts. For further information on similar products, our expert technical support and knowledgeable sales team can help you get the ideal waveguide horn that meets your requirements. |
| 0 | ||
| PE3W16220LF | Pasternack Enterprises | Key Specifications, Connector Series 1: MCX, Connector Gender 1: Jack, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: FAKRA, Connector Gender 2: Jack, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: LMR-100A-PVC, RF Cable Type: LMR-100A, RF Cable Impedance: 50 Ohm. MCX Jack to Black FAKRA Jack Cable Using LMR-100 Coax, LF Solder. PE3W16220LF is a MCX jack to FAKRA jack cable using LMR-100A coax. This Pasternack MCX jack to FAKRA jack cable assembly uses a 50 Ohm MCX for connector 1 and a 50 Ohm FAKRA for connector 2. Our jack MCX to jack FAKRA cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE3W16220LF MCX jack to FAKRA jack cable assembly is constructed with LMR-100A coax, * LMR™ is a trademark of Times Microwave Systems. | 0 | |||
| PE1WAN062-20 | Pasternack Enterprises | Key Specifications, Waveguide Size: WR-62, Frequency, Min: 12.4 GHz, Frequency, Max: 18 GHz, Beam Width V: 17.3, Beam Width H: 17.5. WR-62 Waveguide Antenna, 12.4 GHz to 18 GHz Frequency Range, 20 dBi Gain,, Integrated Cage-Style Mount. Pasternack’s PE1WAN062-20 WR-62 waveguide horn is also known as a waveguide horn antenna. This WR-62 waveguide antenna has a nominal gain of 20 dBi. Our waveguide horn can operate at frequencies ranging from 12.4 to 18 GHz. The antenna with linear polarization has a typical VSWR of 1.3:1 and is suitable for test and measurement industries. This 20 dBi waveguide horn from Pasternack has an overall length of 4.72 inches, a width of 4.72 inches, and a weight of 0.98 lbs. Our WR-62 waveguide horn antenna has a typical vertical beam width of 17.3 degrees and a horizontal beam width of 17.5 degrees at 3 dB. Our antenna comes with a None square cover flange and is built to precise microwave and millimeter wave horn antenna design specifications. This WR-62 antenna has an aluminum body. Additional dimensions and specifications for this antenna are on our downloadable PDF datasheet. This WR-62 waveguide horn antenna with 20 dBi gain is part of over one million RF, microwave, and millimeter wave components available from Pasternack. Our horn antenna can ship worldwide on the same business day as it is purchased with our other available RF parts. For further information on similar products, our expert technical support and knowledgeable sales team can help you get the ideal waveguide horn that meets your requirements. |
| 0 | ||
![]() Teledyne HiRel | 5962-8762201FA | Teledyne HiRel | DECODER/DEMULTIPLEXER, 3-TO-8-LINE RoHS : Not Compliant | 0 | ||
| 5962-8762201EA | Teledyne HiRel | DECODER/DEMULTIPLEXER, 3-TO-8-LINE RoHS : Not Compliant | 0 | |||
| 5962-87622012A | Teledyne HiRel | DECODER/DEMULTIPLEXER, 3-TO-8-LINE RoHS : Not Compliant | 0 | |||
![]() Vyrian | 1062-20-0244 | TE Connectivity | Connector Accessory, 0.051in Min Cable Dia, 0.085in Max Cable Dia, Contact, Copper Alloy RoHS : Compliant | 4,200 | ||
| M39006/22-0292 | KYOCERA AVX | Tantalum Capacitor, Polarized, Tantalum (wet), 15V, 5% +Tol, 5% -Tol, 120uF, Through Hole Mount | 3,150 | |||
| M39006/22-0125 | KYOCERA AVX | Tantalum Capacitor, Polarized, Tantalum (wet), 50V, 10% +Tol, 10% -Tol, 10uF, Through Hole Mount | 2,700 | |||
5962F8762201XA![]() | STMicroelectronics | 2,300 | ||||
0C622-003-XTD![]() | onsemi | Stepper Motor Controller, 0.8A, PDSO20 RoHS : Compliant | 1,900 | |||
PIC16C622-04E/P![]() | Microchip Technology Inc | RoHS : Compliant | 1,650 | |||
| 62205ANHMW | Intel Corporation | 1,250 | ||||
5962-9762201Q2X![]() | Texas Instruments | Line Receiver, 4 Func, 4 Rcvr, CQCC20 | 810 | |||
| 62200-2000 | Molex | Tool And Machinery, Insertion Tool RoHS : Unknown | 780 | |||
| MAX66220ETBT | Analog Devices Inc | 670 | ||||
5962-9762201VFX![]() | Texas Instruments | Line Receiver, 4 Func, 4 Rcvr, CDFP16 | 440 | |||
PIC16LC622-04E/P![]() | Microchip Technology Inc | RoHS : Compliant | 260 | |||
5962-9062203MYX![]() | Texas Instruments | Fast Page DRAM, 4MX1, 80ns, CMOS | 140 | |||
| 5962-9062201MVX | Texas Instruments | Fast Page DRAM, 4MX1, 120ns, CMOS, CDIP16 | 72 | |||
| 5962-9462201M2X | Texas Instruments | 5 | ||||
![]() Waytek, Inc. | AT62-201-16141 | Amphenol Sine Systems | AT/AHD-9 Female Nickel Socket CONTACT 16-20GA SIZE 16 Solid 0462-201-16141 Alt# 38194 |
| 190,773 | |
| AT62-209-16141 | Amphenol Sine Systems | AT/AHD-9 Female Nickel Socket Contact 14GA SIZE 16 Solid 0462-209-16141 |
| 105,569 | ||
| AT62-203-12141 | Amphenol Sine Systems | ATP/AHD-6 Female Nickel Socket Contact 14-12GA Size 12 Solid 0462-203-12141 |
| 42,468 | ||
| AT62-20-0122 | Amphenol Sine Systems | ATM Female Reel Socket Contact 22-16GA Size 20 S&F 4000/Reel 1062-20-0122 |
| 36,000 | ||
| AT62-201-20141 | Amphenol Sine Systems | ATM Female Nickel Socket Contact 22-20GA Size 20 Solid 634 0462-201-20141 Size Change |
| 26,543 | ||
| AT62-201-1631 | Amphenol Sine Systems | AT/AHD-9 Female Gold Socket Contact 20-16GA Size 16 Solid 0462-201-1631 |
| 19,763 | ||
| AT62-20-0122 | Amphenol Sine Systems | ATM Female Loose Socket CONTACT SIZE 20 S&F 22-16GA TOOL 636 1062-20-0122 NICKEL |
| 12,571 | ||
| AT62-203-08141 | Amphenol Sine Systems | Amphenol Sine Systems AT62-203-08141 ATHD female socket terminal is a size 8 connector socket for 10-8 Ga. wire. Built from copper alloy with nickel plating, it supports ATHD Series heavy-duty power connector assemblies. |
| 2,143 | ||
| AT62-203-04141 | Amphenol Sine Systems | Amphenol Sine Systems AT62-203-04141 ATHD female socket terminal is a size 4 connector socket for 6 gauge wire. Built from copper alloy with nickel plating, it supports ATHD Series heavy-duty power connector assemblies. |
| 1,222 |
| Does ALLDATASHEET help your business so far? [ DONATE ] |
About Alldatasheet | Advertisement | Contact us | Privacy Policy | Link to Datasheet | Link Exchange | Manufacturer List All Rights Reserved짤Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |