8000-L10-R Price, Distributor, Stock

Floating connector for energy storage; crimp;male; power and signal; 4 pin(13mm2) + 2 pin(4mm2) + 12 pin(0.5mm2);1000V/70A (4 pin);380V/20A(2 pin) 60V/5A (12pin); black

1 : $3.035

1010080000006

BEISIT

Floating connector for energy storage; crimp;female; power and signal; 4 pin(13mm2) + 2 pin(4mm2) + 12 pin(0.5mm2);1000V/70A (4 pin);380V/20A(2 pin) 60V/5A (12pin); black

1 : $3.035

1010080000003

BEISIT

Floating connector for energy storage; crimp;male; power and signal; 3 pin(25mm2) power + 12 pin (0.5mm2) signal; 1000V/120A (3 pin); 60V/5A(12 PIN); black

1 : $2.276

Pasternack Enterprises US

PE70A8000

Pasternack Enterprises

Key Specifications, Design: Relay Controlled, Maximum Frequency: 1,000 MHz, Impedance: 50 Ohm, Power Maximum: 0.5 Watt, VSWR Maximum: 1.25:1, Connector Series 1: SMA, Connector Gender 1: Female, Connector Series 2: SMA, Connector Gender 2: Female, Minimum Attenuation: 0 dB, Maximum Attenuation: 63 dB, Switching Time: 6,000,000 ns. 6 Bit Relay Controlled Programmable Attenuator, 63 dB Up to 1,000 MHz, 1 dB Steps, +12V, SMA Female. PE70A8000 is a programmable attenuator from Pasternack. Our SMA attenuator is a programmable step attenuator design. This 50 Ohm adjustable attenuator is precision manufactured to RF and microwave industry specifications. The Pasternack programmable attenuator has a female gender for connector 1 and a SMA female for connector 2. PE70A8000 programmable step attenuator has a minimum attenuation of 0 dB and a maximum attenuation of 63 dB with 6dB step sizes. Our programmable RF attenuator has frequency range of DC to 1 GHz and a maximum VSWR of 1.25. This adjustable SMA attenuator is rated to 0.5 Watt at the stated attenuation. Our attenuator PE70A8000 is shipped from our facility certified to ISO 9001:2015 the same day as purchased. This RF programmable attenuator is part of over 40,000 RF, microwave and millimeter wave products that ship the same day worldwide, including custom cable assemblies.

1 : $1,710.0
5 : $1,641.6
10 : $1,573.2

PE15A8000

Pasternack Enterprises

Key Specifications. Power Output 23 dBm P1dB Frequency, Min 50 MHz Frequency, Max 4 GHz Gain 26 dB Noise Figure, Max 6.5 dB Noise Figure, Typ 5 dB RF Input VSWR, Max 1.8 Voltage, DC Min 11.5 Volts Voltage, DC Max 13 Volts Connector Series SMA. 23 dBm P1dB, 50 MHz to 4 GHz, Gain Block Amplifier, 26 dB Gain, 35 dBm IP3, 5 dB NF, SMA. PE15A8000 RF gain block amplifier from Pasternack is featured in our extensive in-stock RF amplifier selection. Our connectorized gain block RF amplifier uses SMA connectors. This SMA gain block amplifier has a minimum frequency of 50 MHz, a maximum frequency of 4 GHz and a typical gain of 26 dB. Our radio frequency gain block amp PE15A8000 is part of over 40,000 RF, microwave and millimeter wave components available from Pasternack. This coaxial gain block amplifier can ship worldwide the same day of the purchase as with our other available RF parts.

1 : $1,490.0
5 : $1,430.4
10 : $1,370.8

PE3C8000-150CM

Pasternack Enterprises

Key Specifications, Connector 1 Series: N, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Right Angle, Connector 1 Impedance: 50 Ohm, Connector 2 Series: N, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Right Angle, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Copper Clad Aluminum, RF Cable Part Number: TFT-5G-402, RF Cable Type: TFT-5G-402, RF Cable Impedance: 50 Ohm, Length, Max: 59.06 inches. N Male Right Angle to N Male Right Angle Low PIM Cable 150 CM Length Using TFT-5G-402 Coax Using Times Microwave Components., Radio frequency assembly N male right angle to N male right angle low PIM cable 150 cm length using TFT-5G-402 coax using Times Microwave components from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack low PIM (Passive Intermodulation, also called Intermod for short) coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, general use, etc. The N male right angle to N male right angle low PIM cable 150 cm length using TFT-5G-402 coax using Times Microwave components, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom type N to type N cable assembly orders will ship the same business day as well. Pasternack RF coax low PIM cable assembly is built with a right angle type N cable connection on one end and a right angle type N cable connection on the other. Our low PIM right angle type N to right angle type N cable assembly has a male gender on end 1 and a male on end 2. PE3C8000-150CM can also be known as a low PIM right angle type N plug to right angle type N plug cable assembly and will be shipped the same day as it is purchased. This flexible RF cable assembly with a 0.37-inch diameter has copper as the cable's inner conducting material and PTFE dielectric type. type N low PIM cable assemblies from Pasternack are ideal for applications including indoor and outdoor use and plenum rated applications. The minimum bend radius for this cable is 0.75 inches, allowing for a single bend without damaging the cable. Our PE3C8000-150CM RF cable has a FEP jacket of 0.160-inch diameter. This radio frequency cable assembly can withstand temperatures ranging from -55 to 150 degrees C. The flexible RF cable has an in-series connection. This cable assembly has a typical propagation velocity of 76% and a minimum RF shielding of 80 dB. Our right angle type N male to right angle type N male cable has a maximum VSWR of 1.4:1. Type N plug to type N plug cable assembly PE3C8000-150CM is built with TFT-5G-402 which is a flexible coax type. The Pasternack low passive intermodulation flexible type N cable assembly is manufactured with right angle type N to right angle type N cable connectors, has a 50 Ohm impedance, and is double shielded. Both the connectors have a solder/solder attachment method and a brass body with copper clad aluminum plating. Additional dimensions, specifications and CAD drawings for this low PIM RF cable are available on our downloadable PDF datasheet. Low PIM type N right angle plug to type N right angle plug cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality type N to type N cable assembly for quick shipment worldwide. Variations of type N cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal type N to type N low PIM RF cable assembly as per your requirements.

1 : $97.39
25 : $92.52
50 : $87.65
100 : $83.76

PE88D8000

Pasternack Enterprises

1 : $3,200.0
5 : $3,072.0
10 : $2,944.0

PE3W08000

Pasternack Enterprises

Key Specifications, Connector Series 1: MMCX, Connector Gender 1: Plug, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: MCX, Connector Gender 2: Plug, Connector Polarity 2: Standard, Connector Angle 2: Right Angle, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: LMR-100A-PVC, RF Cable Type: LMR-100A, RF Cable Impedance: 50 Ohm. MMCX Plug to MCX Plug Right Angle Cable Using LMR-100 Coax. PE3W08000 is a MMCX plug to MCX plug right angle cable using LMR-100A coax. This Pasternack MMCX plug to MCX plug right angle cable assembly uses a 50 Ohm MMCX for connector 1 and a 50 Ohm MCX for connector 2. MMCX to MCX right angle coaxial cable assembly uses 90 degree right angle coax cable connector. Our plug MMCX to plug MCX right angle cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE3W08000 MMCX plug to MCX plug right angle cable assembly is constructed with LMR-100A coax, * LMR™ is a trademark of Times Microwave Systems.

PE3C8000-50CM

Pasternack Enterprises

Key Specifications, Connector 1 Series: N, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Right Angle, Connector 1 Impedance: 50 Ohm, Connector 2 Series: N, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Right Angle, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Copper Clad Aluminum, RF Cable Part Number: TFT-5G-402, RF Cable Type: TFT-5G-402, RF Cable Impedance: 50 Ohm, Length, Max: 19.68 inches. N Male Right Angle to N Male Right Angle Low PIM Cable 50 CM Length Using TFT-5G-402 Coax Using Times Microwave Components., Radio frequency assembly N male right angle to N male right angle low PIM cable 50 cm length using TFT-5G-402 coax using Times Microwave components from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack low PIM (Passive Intermodulation, also called Intermod for short) coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, general use, etc. The N male right angle to N male right angle low PIM cable 50 cm length using TFT-5G-402 coax using Times Microwave components, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom type N to type N cable assembly orders will ship the same business day as well. Pasternack RF coax low PIM cable assembly is built with a right angle type N cable connection on one end and a right angle type N cable connection on the other. Our low PIM right angle type N to right angle type N cable assembly has a male gender on end 1 and a male on end 2. PE3C8000-50CM can also be known as a low PIM right angle type N plug to right angle type N plug cable assembly and will be shipped the same day as it is purchased. This flexible RF cable assembly with a 0.37-inch diameter has copper as the cable's inner conducting material and PTFE dielectric type. type N low PIM cable assemblies from Pasternack are ideal for applications including indoor and outdoor use and plenum rated applications. The minimum bend radius for this cable is 0.75 inches, allowing for a single bend without damaging the cable. Our PE3C8000-50CM RF cable has a FEP jacket of 0.160-inch diameter. This radio frequency cable assembly can withstand temperatures ranging from -55 to 150 degrees C. The flexible RF cable has an in-series connection. This cable assembly has a typical propagation velocity of 76% and a minimum RF shielding of 80 dB. Our right angle type N male to right angle type N male cable has a maximum VSWR of 1.4:1. Type N plug to type N plug cable assembly PE3C8000-50CM is built with TFT-5G-402 which is a flexible coax type. The Pasternack low passive intermodulation flexible type N cable assembly is manufactured with right angle type N to right angle type N cable connectors, has a 50 Ohm impedance, and is double shielded. Both the connectors have a solder/solder attachment method and a brass body with copper clad aluminum plating. Additional dimensions, specifications and CAD drawings for this low PIM RF cable are available on our downloadable PDF datasheet. Low PIM type N right angle plug to type N right angle plug cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality type N to type N cable assembly for quick shipment worldwide. Variations of type N cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal type N to type N low PIM RF cable assembly as per your requirements.

1 : $87.79
25 : $83.4
50 : $79.01
100 : $75.5

PE3C8000-200CM

Pasternack Enterprises

Key Specifications, Connector 1 Series: N, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Right Angle, Connector 1 Impedance: 50 Ohm, Connector 2 Series: N, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Right Angle, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Copper Clad Aluminum, RF Cable Part Number: TFT-5G-402, RF Cable Type: TFT-5G-402, RF Cable Impedance: 50 Ohm, Length, Max: 78.74 inches. N Male Right Angle to N Male Right Angle Low PIM Cable 200 CM Length Using TFT-5G-402 Coax Using Times Microwave Components., Radio frequency assembly N male right angle to N male right angle low PIM cable 200 cm length using TFT-5G-402 coax using Times Microwave components from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack low PIM (Passive Intermodulation, also called Intermod for short) coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, general use, etc. The N male right angle to N male right angle low PIM cable 200 cm length using TFT-5G-402 coax using Times Microwave components, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom type N to type N cable assembly orders will ship the same business day as well. Pasternack RF coax low PIM cable assembly is built with a right angle type N cable connection on one end and a right angle type N cable connection on the other. Our low PIM right angle type N to right angle type N cable assembly has a male gender on end 1 and a male on end 2. PE3C8000-200CM can also be known as a low PIM right angle type N plug to right angle type N plug cable assembly and will be shipped the same day as it is purchased. This flexible RF cable assembly with a 0.37-inch diameter has copper as the cable's inner conducting material and PTFE dielectric type. type N low PIM cable assemblies from Pasternack are ideal for applications including indoor and outdoor use and plenum rated applications. The minimum bend radius for this cable is 0.75 inches, allowing for a single bend without damaging the cable. Our PE3C8000-200CM RF cable has a FEP jacket of 0.160-inch diameter. This radio frequency cable assembly can withstand temperatures ranging from -55 to 150 degrees C. The flexible RF cable has an in-series connection. This cable assembly has a typical propagation velocity of 76% and a minimum RF shielding of 80 dB. Our right angle type N male to right angle type N male cable has a maximum VSWR of 1.4:1. Type N plug to type N plug cable assembly PE3C8000-200CM is built with TFT-5G-402 which is a flexible coax type. The Pasternack low passive intermodulation flexible type N cable assembly is manufactured with right angle type N to right angle type N cable connectors, has a 50 Ohm impedance, and is double shielded. Both the connectors have a solder/solder attachment method and a brass body with copper clad aluminum plating. Additional dimensions, specifications and CAD drawings for this low PIM RF cable are available on our downloadable PDF datasheet. Low PIM type N right angle plug to type N right angle plug cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality type N to type N cable assembly for quick shipment worldwide. Variations of type N cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal type N to type N low PIM RF cable assembly as per your requirements.

1 : $103.99
25 : $98.79
50 : $93.59
100 : $89.43

PE3C8000-24

Pasternack Enterprises

Key Specifications, Connector 1 Series: N, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Right Angle, Connector 1 Impedance: 50 Ohm, Connector 2 Series: N, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Right Angle, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Copper Clad Aluminum, RF Cable Part Number: TFT-5G-402, RF Cable Type: TFT-5G-402, RF Cable Impedance: 50 Ohm, Length, Max: 24 inches. N Male Right Angle to N Male Right Angle Low PIM Cable 24 Inch Length Using TFT-5G-402 Coax Using Times Microwave Components., Radio frequency assembly N male right angle to N male right angle low PIM cable 24 inch length using TFT-5G-402 coax using Times Microwave components from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack low PIM (Passive Intermodulation, also called Intermod for short) coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, general use, etc. The N male right angle to N male right angle low PIM cable 24 inch length using TFT-5G-402 coax using Times Microwave components, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom type N to type N cable assembly orders will ship the same business day as well. Pasternack RF coax low PIM cable assembly is built with a right angle type N cable connection on one end and a right angle type N cable connection on the other. Our low PIM right angle type N to right angle type N cable assembly has a male gender on end 1 and a male on end 2. PE3C8000-24 can also be known as a low PIM right angle type N plug to right angle type N plug cable assembly and will be shipped the same day as it is purchased. This flexible RF cable assembly with a 0.37-inch diameter has copper as the cable's inner conducting material and PTFE dielectric type. type N low PIM cable assemblies from Pasternack are ideal for applications including indoor and outdoor use and plenum rated applications. The minimum bend radius for this cable is 0.75 inches, allowing for a single bend without damaging the cable. Our PE3C8000-24 RF cable has a FEP jacket of 0.160-inch diameter. This radio frequency cable assembly can withstand temperatures ranging from -55 to 150 degrees C. The flexible RF cable has an in-series connection. This cable assembly has a typical propagation velocity of 76% and a minimum RF shielding of 80 dB. Our right angle type N male to right angle type N male cable has a maximum VSWR of 1.4:1. Type N plug to type N plug cable assembly PE3C8000-24 is built with TFT-5G-402 which is a flexible coax type. The Pasternack low passive intermodulation flexible type N cable assembly is manufactured with right angle type N to right angle type N cable connectors, has a 50 Ohm impedance, and is double shielded. Both the connectors have a solder/solder attachment method and a brass body with copper clad aluminum plating. Additional dimensions, specifications and CAD drawings for this low PIM RF cable are available on our downloadable PDF datasheet. Low PIM type N right angle plug to type N right angle plug cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality type N to type N cable assembly for quick shipment worldwide. Variations of type N cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal type N to type N low PIM RF cable assembly as per your requirements.

1 : $92.09
25 : $87.49
50 : $82.88
100 : $79.2

PE3C8000-12

Pasternack Enterprises

Key Specifications, Connector Series 1: N, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Right Angle, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: N, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Right Angle, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: TFT-402-LF, RF Cable Type: TFT-402-LF, RF Cable Impedance: 50 Ohm, Length: 12 inches. N Male Right Angle to N Male Right Angle Low PIM Cable 12 Inch Length Using TFT-402-LF Coax Using Times Microwave Components., Radio frequency assembly N male right angle to N male right angle low PIM cable 12 inch length using TFT-402-LF coax using Times Microwave components from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack low PIM (Passive Intermodulation, also called Intermod for short) coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. N male right angle to N male right angle low PIM cable 12 inch length using TFT-402-LF coax using Times Microwave components, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom N type to type N cable assembly orders will ship same day as well. Pasternack RF coax low PIM cable assembly is built with right angle type N cable connection on one end and right angle N type cable connection on the other. Our low PIM right angle type N to right angle type N cable assemblies have a male gender on end 1 and male on end 2. This type N to type N cable is a male to male coax assembly, PE3C8000-12, can also be known as a low PIM right angle N type plug to right angle type N plug cable assembly and will be shipped same-day as it is purchased. N type plug to type N plug cable assembly PE3C8000-12 is built with TFT-402-LF which is a flexible coax type. The Pasternack low passive intermodulation flexible N cable assembly is manufactured with right angle N type to right angle type N cable connectors, has a 50 Ohm impedance and is double shielded. RF specs on this 5.8 GHz maximum frequency low PIM type N right angle male to type N right angle male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. Low PIM type N right angle plug to N type right angle plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality type N to type N cable assembly for quick shipment worldwide. Variations of N type cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this N male right angle to N male right angle low PIM cable 12 inch length using TFT-402-LF coax using Times Microwave components.

1 : $96.29
25 : $91.48
50 : $86.66
100 : $82.81

PE3C8000-36

Pasternack Enterprises

Key Specifications, Connector 1 Series: N, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Right Angle, Connector 1 Impedance: 50 Ohm, Connector 2 Series: N, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Right Angle, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Copper Clad Aluminum, RF Cable Part Number: TFT-5G-402, RF Cable Type: TFT-5G-402, RF Cable Impedance: 50 Ohm, Length, Max: 36 inches. N Male Right Angle to N Male Right Angle Low PIM Cable 36 Inch Length Using TFT-5G-402 Coax Using Times Microwave Components., Radio frequency assembly N male right angle to N male right angle low PIM cable 36 inch length using TFT-5G-402 coax using Times Microwave components from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack low PIM (Passive Intermodulation, also called Intermod for short) coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, general use, etc. The N male right angle to N male right angle low PIM cable 36 inch length using TFT-5G-402 coax using Times Microwave components, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom type N to type N cable assembly orders will ship the same business day as well. Pasternack RF coax low PIM cable assembly is built with a right angle type N cable connection on one end and a right angle type N cable connection on the other. Our low PIM right angle type N to right angle type N cable assembly has a male gender on end 1 and a male on end 2. PE3C8000-36 can also be known as a low PIM right angle type N plug to right angle type N plug cable assembly and will be shipped the same day as it is purchased. This flexible RF cable assembly with a 0.37-inch diameter has copper as the cable's inner conducting material and PTFE dielectric type. type N low PIM cable assemblies from Pasternack are ideal for applications including indoor and outdoor use and plenum rated applications. The minimum bend radius for this cable is 0.75 inches, allowing for a single bend without damaging the cable. Our PE3C8000-36 RF cable has a FEP jacket of 0.160-inch diameter. This radio frequency cable assembly can withstand temperatures ranging from -55 to 150 degrees C. The flexible RF cable has an in-series connection. This cable assembly has a typical propagation velocity of 76% and a minimum RF shielding of 80 dB. Our right angle type N male to right angle type N male cable has a maximum VSWR of 1.4:1. Type N plug to type N plug cable assembly PE3C8000-36 is built with TFT-5G-402 which is a flexible coax type. The Pasternack low passive intermodulation flexible type N cable assembly is manufactured with right angle type N to right angle type N cable connectors, has a 50 Ohm impedance, and is double shielded. Both the connectors have a solder/solder attachment method and a brass body with copper clad aluminum plating. Additional dimensions, specifications and CAD drawings for this low PIM RF cable are available on our downloadable PDF datasheet. Low PIM type N right angle plug to type N right angle plug cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality type N to type N cable assembly for quick shipment worldwide. Variations of type N cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal type N to type N low PIM RF cable assembly as per your requirements.

1 : $94.19
25 : $89.48
50 : $84.77
100 : $81.0

PE3C8000-60

Pasternack Enterprises

Key Specifications, Connector 1 Series: N, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Right Angle, Connector 1 Impedance: 50 Ohm, Connector 2 Series: N, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Right Angle, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Copper Clad Aluminum, RF Cable Part Number: TFT-5G-402, RF Cable Type: TFT-5G-402, RF Cable Impedance: 50 Ohm, Length, Max: 60 inches. N Male Right Angle to N Male Right Angle Low PIM Cable 60 Inch Length Using TFT-5G-402 Coax Using Times Microwave Components., Radio frequency assembly N male right angle to N male right angle low PIM cable 60 inch length using TFT-5G-402 coax using Times Microwave components from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack low PIM (Passive Intermodulation, also called Intermod for short) coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, general use, etc. The N male right angle to N male right angle low PIM cable 60 inch length using TFT-5G-402 coax using Times Microwave components, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom type N to type N cable assembly orders will ship the same business day as well. Pasternack RF coax low PIM cable assembly is built with a right angle type N cable connection on one end and a right angle type N cable connection on the other. Our low PIM right angle type N to right angle type N cable assembly has a male gender on end 1 and a male on end 2. PE3C8000-60 can also be known as a low PIM right angle type N plug to right angle type N plug cable assembly and will be shipped the same day as it is purchased. This flexible RF cable assembly with a 0.37-inch diameter has copper as the cable's inner conducting material and PTFE dielectric type. type N low PIM cable assemblies from Pasternack are ideal for applications including indoor and outdoor use and plenum rated applications. The minimum bend radius for this cable is 0.75 inches, allowing for a single bend without damaging the cable. Our PE3C8000-60 RF cable has a FEP jacket of 0.160-inch diameter. This radio frequency cable assembly can withstand temperatures ranging from -55 to 150 degrees C. The flexible RF cable has an in-series connection. This cable assembly has a typical propagation velocity of 76% and a minimum RF shielding of 80 dB. Our right angle type N male to right angle type N male cable has a maximum VSWR of 1.4:1. Type N plug to type N plug cable assembly PE3C8000-60 is built with TFT-5G-402 which is a flexible coax type. The Pasternack low passive intermodulation flexible type N cable assembly is manufactured with right angle type N to right angle type N cable connectors, has a 50 Ohm impedance, and is double shielded. Both the connectors have a solder/solder attachment method and a brass body with copper clad aluminum plating. Additional dimensions, specifications and CAD drawings for this low PIM RF cable are available on our downloadable PDF datasheet. Low PIM type N right angle plug to type N right angle plug cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality type N to type N cable assembly for quick shipment worldwide. Variations of type N cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal type N to type N low PIM RF cable assembly as per your requirements.

1 : $101.99
25 : $96.89
50 : $91.79
100 : $87.71

PE3C8000-100CM

Pasternack Enterprises

Key Specifications, Connector 1 Series: N, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Right Angle, Connector 1 Impedance: 50 Ohm, Connector 2 Series: N, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Right Angle, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Copper Clad Aluminum, RF Cable Part Number: TFT-5G-402, RF Cable Type: TFT-5G-402, RF Cable Impedance: 50 Ohm, Length, Max: 39.37 inches. N Male Right Angle to N Male Right Angle Low PIM Cable 100 CM Length Using TFT-5G-402 Coax Using Times Microwave Components., Radio frequency assembly N male right angle to N male right angle low PIM cable 100 cm length using TFT-5G-402 coax using Times Microwave components from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack low PIM (Passive Intermodulation, also called Intermod for short) coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, general use, etc. The N male right angle to N male right angle low PIM cable 100 cm length using TFT-5G-402 coax using Times Microwave components, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom type N to type N cable assembly orders will ship the same business day as well. Pasternack RF coax low PIM cable assembly is built with a right angle type N cable connection on one end and a right angle type N cable connection on the other. Our low PIM right angle type N to right angle type N cable assembly has a male gender on end 1 and a male on end 2. PE3C8000-100CM can also be known as a low PIM right angle type N plug to right angle type N plug cable assembly and will be shipped the same day as it is purchased. This flexible RF cable assembly with a 0.37-inch diameter has copper as the cable's inner conducting material and PTFE dielectric type. type N low PIM cable assemblies from Pasternack are ideal for applications including indoor and outdoor use and plenum rated applications. The minimum bend radius for this cable is 0.75 inches, allowing for a single bend without damaging the cable. Our PE3C8000-100CM RF cable has a FEP jacket of 0.160-inch diameter. This radio frequency cable assembly can withstand temperatures ranging from -55 to 150 degrees C. The flexible RF cable has an in-series connection. This cable assembly has a typical propagation velocity of 76% and a minimum RF shielding of 80 dB. Our right angle type N male to right angle type N male cable has a maximum VSWR of 1.4:1. Type N plug to type N plug cable assembly PE3C8000-100CM is built with TFT-5G-402 which is a flexible coax type. The Pasternack low passive intermodulation flexible type N cable assembly is manufactured with right angle type N to right angle type N cable connectors, has a 50 Ohm impedance, and is double shielded. Both the connectors have a solder/solder attachment method and a brass body with copper clad aluminum plating. Additional dimensions, specifications and CAD drawings for this low PIM RF cable are available on our downloadable PDF datasheet. Low PIM type N right angle plug to type N right angle plug cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality type N to type N cable assembly for quick shipment worldwide. Variations of type N cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal type N to type N low PIM RF cable assembly as per your requirements.

1 : $92.09
25 : $87.49
50 : $82.88
100 : $79.2

PE3C8000

Pasternack Enterprises

Key Specifications, Connector 1 Series: N, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Right Angle, Connector 1 Impedance: 50 Ohm, Connector 2 Series: N, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Right Angle, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Copper Clad Aluminum, RF Cable Part Number: TFT-5G-402, RF Cable Type: TFT-5G-402, RF Cable Impedance: 50 Ohm. N Male Right Angle to N Male Right Angle Low PIM Cable Using TFT-5G-402 Coax Using Times Microwave Components., Radio frequency assembly N male right angle to N male right angle low PIM cable using TFT-5G-402 coax using Times Microwave components from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack low PIM (Passive Intermodulation, also called Intermod for short) coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, general use, etc. The N male right angle to N male right angle low PIM cable using TFT-5G-402 coax using Times Microwave components, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom type N to type N cable assembly orders will ship the same business day as well. Pasternack RF coax low PIM cable assembly is built with a right angle type N cable connection on one end and a right angle type N cable connection on the other. Our low PIM right angle type N to right angle type N cable assembly has a male gender on end 1 and a male on end 2. PE3C8000 can also be known as a low PIM right angle type N plug to right angle type N plug cable assembly and will be shipped the same day as it is purchased. This flexible RF cable assembly with a 0.37-inch diameter has copper as the cable's inner conducting material and PTFE dielectric type. type N low PIM cable assemblies from Pasternack are ideal for applications including indoor and outdoor use and plenum rated applications. The minimum bend radius for this cable is 0.75 inches, allowing for a single bend without damaging the cable. Our PE3C8000 RF cable has a FEP jacket of 0.160-inch diameter. This radio frequency cable assembly can withstand temperatures ranging from -55 to 150 degrees C. The flexible RF cable has an in-series connection. This cable assembly has a typical propagation velocity of 76% and a minimum RF shielding of 80 dB. Our right angle type N male to right angle type N male cable has a maximum VSWR of 1.4:1. Type N plug to type N plug cable assembly PE3C8000 is built with TFT-5G-402 which is a flexible coax type. The Pasternack low passive intermodulation flexible type N cable assembly is manufactured with right angle type N to right angle type N cable connectors, has a 50 Ohm impedance, and is double shielded. Both the connectors have a solder/solder attachment method and a brass body with copper clad aluminum plating. Additional dimensions, specifications and CAD drawings for this low PIM RF cable are available on our downloadable PDF datasheet. Low PIM type N right angle plug to type N right angle plug cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality type N to type N cable assembly for quick shipment worldwide. Variations of type N cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal type N to type N low PIM RF cable assembly as per your requirements.

PE38000

Pasternack Enterprises

PE3C8000-48

Pasternack Enterprises

Key Specifications, Connector 1 Series: N, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Right Angle, Connector 1 Impedance: 50 Ohm, Connector 2 Series: N, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Right Angle, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Copper Clad Aluminum, RF Cable Part Number: TFT-5G-402, RF Cable Type: TFT-5G-402, RF Cable Impedance: 50 Ohm, Length, Max: 48 inches. N Male Right Angle to N Male Right Angle Low PIM Cable 48 Inch Length Using TFT-5G-402 Coax Using Times Microwave Components., Radio frequency assembly N male right angle to N male right angle low PIM cable 48 inch length using TFT-5G-402 coax using Times Microwave components from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack low PIM (Passive Intermodulation, also called Intermod for short) coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, general use, etc. The N male right angle to N male right angle low PIM cable 48 inch length using TFT-5G-402 coax using Times Microwave components, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom type N to type N cable assembly orders will ship the same business day as well. Pasternack RF coax low PIM cable assembly is built with a right angle type N cable connection on one end and a right angle type N cable connection on the other. Our low PIM right angle type N to right angle type N cable assembly has a male gender on end 1 and a male on end 2. PE3C8000-48 can also be known as a low PIM right angle type N plug to right angle type N plug cable assembly and will be shipped the same day as it is purchased. This flexible RF cable assembly with a 0.37-inch diameter has copper as the cable's inner conducting material and PTFE dielectric type. type N low PIM cable assemblies from Pasternack are ideal for applications including indoor and outdoor use and plenum rated applications. The minimum bend radius for this cable is 0.75 inches, allowing for a single bend without damaging the cable. Our PE3C8000-48 RF cable has a FEP jacket of 0.160-inch diameter. This radio frequency cable assembly can withstand temperatures ranging from -55 to 150 degrees C. The flexible RF cable has an in-series connection. This cable assembly has a typical propagation velocity of 76% and a minimum RF shielding of 80 dB. Our right angle type N male to right angle type N male cable has a maximum VSWR of 1.4:1. Type N plug to type N plug cable assembly PE3C8000-48 is built with TFT-5G-402 which is a flexible coax type. The Pasternack low passive intermodulation flexible type N cable assembly is manufactured with right angle type N to right angle type N cable connectors, has a 50 Ohm impedance, and is double shielded. Both the connectors have a solder/solder attachment method and a brass body with copper clad aluminum plating. Additional dimensions, specifications and CAD drawings for this low PIM RF cable are available on our downloadable PDF datasheet. Low PIM type N right angle plug to type N right angle plug cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality type N to type N cable assembly for quick shipment worldwide. Variations of type N cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal type N to type N low PIM RF cable assembly as per your requirements.

1 : $98.49
25 : $93.57
50 : $88.64
100 : $84.7

Teledyne HiRel

8000305YA

Teledyne HiRel

MICROPROCESSOR, 16-BIT, 10 MHZ

8000303XA

Teledyne HiRel

MICROPROCESSOR, 16-BIT, 6.0 MHZ

8000303UA

Teledyne HiRel

MICROPROCESSOR, 16-BIT, 6.0 MHZ

8000301XA

Teledyne HiRel

MICROPROCESSOR, 16-BIT, 4.0 MHZ

8000304UA

Teledyne HiRel

MICROPROCESSOR, 16-BIT, 10 MHZ

8000304XA

Teledyne HiRel

MICROPROCESSOR, 16-BIT, 10 MHZ

8000306QA

Teledyne HiRel

MICROPROCESSOR, 16-BIT, 6.0 MHZ

8000301UA

Teledyne HiRel

MICROPROCESSOR, 16-BIT, 4.0 MHZ

8000305QA

Teledyne HiRel

MICROPROCESSOR, 16-BIT, 10 MHZ

8000305YC

Teledyne HiRel

MICROPROCESSOR, 16-BIT, 10 MHZ, GOLD LEAD FINISH

8000302QA

Teledyne HiRel

MICROPROCESSOR, 16-BIT, 4.0 MHZ

5962-9080001MFA

Teledyne HiRel

8000306YA

Teledyne HiRel

MICROPROCESSOR, 16-BIT, 6.0 MHZ

8000302YA

Teledyne HiRel

MICROPROCESSOR, 16-BIT, 4.0 MHZ

5962-9080001MEA

Teledyne HiRel

Vyrian

240-1288-00-0602J

3m Electronic Products Division

IC Socket, DIP40, 40 Contact(s)

17,076

FW4800013

Diodes Incorporated

Parallel - Fundamental Quartz Crystal, 48MHz Nom

13,933

1120780001

Molex

Interface Modules
RoHS : Compliant

12,553

FY0800017

Diodes Incorporated

Parallel - Fundamental Quartz Crystal, 8MHz Nom

9,336

VC-709-ECE-KAAN-122M880000

Microchip Technology Inc

LVPECL Output Clock Oscillator, 122.88MHz Nom
RoHS : Compliant

8,445

TPS68000DBTG4

Texas Instruments

Fluorescent Light Controller, 100kHz Switching Freq-Max, PDSO30
RoHS : Compliant

4,820

KTH-ZD8000A/256

Kingston Technology Company

4,589

VCC6-LAB-122M880000

Microchip Technology Inc

LVDS Output Clock Oscillator, 122.88MHz Nom
RoHS : Compliant

3,504

KTH-ZD8000/1GB

Kingston Technology Company

3,350

MC56F80000-EVK

NXP Semiconductors

3,010

XC2V8000-5CS144C

AMD Xilinx

Analog Circuit

2,423

XC2V8000-5FFG1517I

AMD Xilinx

Field Programmable Gate Array, 11648 CLBs, 8000000 Gates, 750MHz, 104832-Cell, CMOS, PBGA1517
RoHS : Compliant

1,972

XC2V8000-4BG575I

AMD Xilinx

Analog Circuit

1,818

AMPMDFB-8.0000T3

Abracon Corporation

CMOS Output Clock Oscillator, 8MHz Nom
RoHS : Compliant

766

HVSL800022B0H6

Amphenol Corporation

Combination Line Connector, 2 Contact(s), Female, Screw Terminal, Receptacle

282

Waytek, Inc.

19038-0006

Molex

22-18 GA .180 Female Bullet Fully Insulated NylonTerminal
RoHS : Compliant

50 : $0.2688
200 : $0.2444
500 : $0.2181
1,000 : $0.1973
5,000 : $0.1882

31,847

19038-0009

Molex

16-14 GA .156 Female Bullet Terminal Nylon Insulation
RoHS : Compliant

50 : $0.202
200 : $0.1883
500 : $0.1753
1,000 : $0.1616
5,000 : $0.1535

26,795

94018-0002

Unity Manufacturing Co Ltd

6" Black Post-Mount Spotlight Unity 94018-0002 LED 30W 12V 215,000 CANDLE 50,000 HOURS

1 : $209.83
5 : $208.08
10 : $204.61

19208-0002

Molex

12-10 GA Parallel Butt Connector Non-Insulated
RoHS : Compliant

100 : $0.1377
200 : $0.1251
500 : $0.1117
1,000 : $0.1011
5,000 : $0.0965

Win Source Electronics

50012-8000

Molex

2.00mm (.079") Pitch Crimp Terminal, Reel, for 51006 Housing
RoHS : Compliant

20,550 : $0.0164
15,340 : $0.0183
11,835 : $0.0189
8,625 : $0.0195
5,560 : $0.0202
2,285 : $0.0245

900,000

50013-8000

Molex

2.00mm (.079") Pitch Crimp Terminal, Reel, for 51005 Housing
RoHS : Compliant

29,130 : $0.0103
21,740 : $0.0115
16,810 : $0.0119
12,200 : $0.0123
7,875 : $0.0127
3,250 : $0.0154

192,000

Q22FA1280009200

Seiko Epson Corporation

10pF SMD2016-4P Crystals RoHS
RoHS : Compliant

2,370 : $0.1268
1,900 : $0.1319
1,460 : $0.1371
1,020 : $0.1474
660 : $0.1525
310 : $0.1628

165,000

AD8000YCPZ-REEL

Analog Devices Inc

IC OPAMP CFA 1 CIRCUIT 8LFCSP
RoHS : Compliant

60 : $5.0585
45 : $5.6422
35 : $5.8368
25 : $6.0313
17 : $6.2259
7 : $7.5878

15,250

78800-0001

Molex

MICRO SIM 1.5MM HT HINGED 6CKT
RoHS : Compliant

455 : $0.6634
340 : $0.74
265 : $0.7655
190 : $0.791
125 : $0.8165
55 : $0.9951

14,413

48408-0003

Molex

USB 3.0 F/A VERTICAL REC 15U
RoHS : Compliant

305 : $0.9849
230 : $1.0985
180 : $1.1364
130 : $1.1743
85 : $1.2122
35 : $1.4773

13,373

HCPL-7800-000E

Broadcom Limited

IC OPAMP ISOLATION 100KHZ 8DIP
RoHS : Compliant

143 : $2.106
115 : $2.1916
88 : $2.2772
62 : $2.4484
40 : $2.534
19 : $2.7052

10,500

HCPL-7800-000E/500E

Avago Technologies

179 : $1.8777
134 : $2.0944
104 : $2.1665
76 : $2.2388
49 : $2.311
20 : $2.8165

8,500

ABMM2-8.000MHZ-E2-T

Abracon Corporation

CRYSTAL 8.0000MHZ 18PF SMD
RoHS : Compliant

535 : $0.5654
400 : $0.6306
310 : $0.6524
225 : $0.6741
145 : $0.6959
60 : $0.8481

8,000

PTN78000WAZT

Texas Instruments

DC DC CONVERTER 2.5-12.6V
RoHS : Compliant

9 : $35.2512
7 : $39.3187
5 : $40.6745
4 : $42.0303
3 : $43.3861
1 : $52.8768

5,620

DSSK80-006B

IXYS Integrated Circuits Division

DIODE ARRAY SCHOTTKY 60V TO247AD

39 : $7.8788
29 : $8.7879
22 : $9.091
16 : $9.394
11 : $9.697
5 : $11.8182

2,328

DAC80004IDMDR

Texas Instruments

IC DAC 16BIT V-OUT 14VSON / 16 Bit Digital to Analog Converter 4 14-VSON (4x3)
RoHS : Compliant

19 : $16.0647
14 : $17.9183
11 : $18.5362
8 : $19.1541
6 : $19.7719
3 : $24.097

1,838

ABM3B-8.000MHZ-10-1-U-T

Abracon Corporation

RoHS : Compliant

825 : $0.3647
615 : $0.4068
480 : $0.4208
345 : $0.4348
225 : $0.4488
95 : $0.547

1,310

PTN78000AAZ

Texas Instruments

REG SW -15 TO -3.3V 1.5A SMD
RoHS : Compliant

21 : $14.4977
16 : $16.1705
12 : $16.7281
9 : $17.2857
6 : $17.8433
3 : $21.7465

706

900-83668-0000-000

NVIDIA

JETSON XAVIE NX MODULE 8GB

1 : $1,587.7863

250

8000-L10-R Distributor

Link URL