822-CTACAC-R Price, Distributor, Stock

Key Specifications, Connector 1 Series: N, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: C, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Right Angle, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: RG400/U, RF Cable Type: RG400, RF Cable Impedance: 50 Ohm, Length, Max: 24 inches. N Male to C Male Right Angle Cable 24 Inch Length Using RG400 Coax., Radio frequency assembly N male to C male right angle cable 24 inch length using RG400 coax from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, general use, etc. The N male to C male right angle cable 24 inch length using RG400 coax, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom type N to type C cable assembly orders will ship the same business day as well. Pasternack RF coax cable assembly is built with a type N cable connection on one end and a right angle type C cable connection on the other. Our type N to right angle type C cable assembly has a male gender on end 1 and a male on end 2. PE38482-24 can also be known as a type N plug to right angle type C plug cable assembly and will be shipped the same day as it is purchased. This flexible RF cable assembly with a 0.5-inch diameter has copper as the cable's inner conducting material and PTFE dielectric type. The minimum bend radius for this cable is 1 inches, allowing for a single bend without damaging the cable. Our PE38482-24 RF cable has a FEP jacket of 0.195-inch diameter. The flexible RF cable has a between series connection. Type N plug to type C plug cable assembly PE38482-24 is built with RG400 which is a flexible coax type. The Pasternack flexible type N cable assembly is manufactured with type N to right angle type C cable connectors, has a 50 Ohm impedance, and is double shielded. Both the connectors have a crimp/solder attachment method and a brass body with nickel plating. Additional dimensions, specifications and CAD drawings for this RF cable are available on our downloadable PDF datasheet. PE38482-24 can also be used in the other direction and will be a right angle type C male to type N male cable assembly if the opposite connectivity is required. Type N plug to type C right angle plug cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality type N to type C cable assembly for quick shipment worldwide. Variations of type N and type C cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal type N to type C RF cable assembly as per your requirements.

1 : $235.99
10 : $231.27
25 : $226.55
100 : $221.83

PE3C6182-200CM

Pasternack Enterprises

Key Specifications, Connector Series 1: 7/16 DIN, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: 7/16 DIN, Connector Gender 2: Female, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: SPP-250-LLPL, RF Cable Type: SPP-250-LLPL, RF Cable Impedance: 50 Ohm, Length: 78.7402 inches. Plenum 7/16 DIN Male to 7/16 DIN Female Low PIM Cable 200 cm Length Using SPP-250-LLPL Coax Using Times Microwave Parts., Radio frequency assembly plenum 7/16 DIN male to 7/16 DIN female low PIM cable 200 cm length using SPP-250-LLPL coax using Times Microwave parts from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack low PIM (Passive Intermodulation, also called Intermod for short) coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. Plenum 7/16 DIN male to 7/16 DIN female low PIM cable 200 cm length using SPP-250-LLPL coax using Times Microwave parts, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom TC-SPP250-716M-LP 7/16 DIN to TC-SPP250-716F-LP 7/16 DIN cable assembly orders will ship same day as well. Pasternack RF coax low PIM cable assembly is built with TC-SPP250-716M-LP 7/16 DIN cable connection on one end and TC-SPP250-716F-LP 7/16 DIN cable connection on the other. Our low PIM TC-SPP250-716M-LP 7/16 DIN to TC-SPP250-716F-LP 7/16 DIN cable assemblies have a male gender on end 1 and female on end 2. This TC-SPP250-716M-LP 7/16 DIN to TC-SPP250-716F-LP 7/16 DIN cable is a male to female coax assembly, PE3C6182-200CM, can also be known as a low PIM TC-SPP250-716M-LP 7/16 DIN plug to TC-SPP250-716F-LP 7/16 DIN jack cable assembly and will be shipped same-day as it is purchased. TC-SPP250-716M-LP 7/16 DIN plug to TC-SPP250-716F-LP 7/16 DIN jack cable assembly PE3C6182-200CM is built with SPP-250-LLPL which is a corrugated coax type. The Pasternack low passive intermodulation corrugated TC-SPP250-716M-LP 7/16 DIN cable assembly is manufactured with TC-SPP250-716M-LP 7/16 DIN to TC-SPP250-716F-LP 7/16 DIN cable connectors, has a 50 Ohm impedance and is single shielded. RF specs on this 5.8 GHz maximum frequency low PIM TC-SPP250-716M-LP 7/16 DIN male to TC-SPP250-716F-LP 7/16 DIN female cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3C6182-200CM can also be used in the other direction and will be TC-SPP250-716F-LP 7/16 DIN female to TC-SPP250-716M-LP 7/16 DIN male cable assembly if the opposite connectivity is required. Low PIM TC-SPP250-716M-LP 7/16 DIN plug to TC-SPP250-716F-LP 7/16 DIN jack cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality TC-SPP250-716M-LP 7/16 DIN to TC-SPP250-716F-LP 7/16 DIN cable assembly for quick shipment worldwide. Variations of TC-SPP250-716M-LP 7/16 DIN cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this plenum 7/16 DIN male to 7/16 DIN female low PIM cable 200 cm length using SPP-250-LLPL coax using Times Microwave parts.

1 : $171.99
25 : $163.39
50 : $154.79
100 : $147.91

PE3C8226-150CM

Pasternack Enterprises

Key Specifications, Connector Series 1: 4.1/9.5 Mini DIN, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: 4.3-10, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: TFT-402, RF Cable Type: TFT-402, RF Cable Impedance: 50 Ohm, Length: 59.06 inches. 4.1/9.5 Mini DIN Male to 4.3-10 Male Low PIM Cable 150 CM Length Using TFT-402 Coax Using Times Microwave Components., Radio frequency assembly 4.1/9.5 mini DIN male to 4.3-10 male low PIM cable 150 cm length using TFT-402 coax using Times Microwave components from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack low PIM (Passive Intermodulation, also called Intermod for short) coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. 4.1/9.5 mini DIN male to 4.3-10 male low PIM cable 150 cm length using TFT-402 coax using Times Microwave components, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom 4.1/9.5 mini DIN to 4.3-10 cable assembly orders will ship same day as well. Pasternack RF coax low PIM cable assembly is built with 4.1/9.5 mini DIN cable connection on one end and 4.3-10 cable connection on the other. Our low PIM 4.1/9.5 mini DIN to 4.3-10 cable assemblies have a male gender on end 1 and male on end 2. This 4.1/9.5 mini DIN to 4.3-10 cable is a male to male coax assembly, PE3C8226-150CM, can also be known as a low PIM 4.1/9.5 mini DIN plug to 4.3-10 plug cable assembly and will be shipped same-day as it is purchased. 4.1/9.5 mini DIN plug to 4.3-10 plug cable assembly PE3C8226-150CM is built with TFT-402 which is a flexible coax type. The Pasternack low passive intermodulation flexible 4.1/9.5 Mini DIN cable assembly is manufactured with 4.1/9.5 mini DIN to 4.3-10 cable connectors, has a 50 Ohm impedance and is double shielded. RF specs on this 3 GHz maximum frequency low PIM 4.1/9.5 mini DIN male to 4.3-10 male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3C8226-150CM can also be used in the other direction and will be 4.3-10 male to 4.1/9.5 mini DIN male cable assembly if the opposite connectivity is required. Low PIM 4.1/9.5 mini DIN plug to 4.3-10 plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality 4.1/9.5 mini DIN to 4.3-10 cable assembly for quick shipment worldwide. Variations of 4.1/9.5 mini DIN cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this 4.1/9.5 mini DIN male to 4.3-10 male low PIM cable 150 cm length using TFT-402 coax using Times Microwave components.

1 : $106.99
25 : $101.64
50 : $96.29
100 : $92.01

PE3W14822

Pasternack Enterprises

Key Specifications, Connector Series 1: 2.92mm, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: SMA, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Right Angle, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: PE-SR402AL, RF Cable Type: PE-SR402AL, RF Cable Impedance: 50 Ohm. 2.92mm Male to SMA Male Right Angle Cable Using PE-SR402AL Coax. PE3W14822 is a 2.92mm male to SMA male right angle cable using PE-SR402AL coax. This Pasternack 2.92mm male to SMA male right angle cable assembly uses a 50 Ohm 2.92mm for connector 1 and a 50 Ohm SMA for connector 2. 2.92mm to SMA right angle coaxial cable assembly uses 90 degree right angle coax cable connector. Our male 2.92mm to male SMA right angle cable assembly uses a semi-rigid cable type that is 50 Ohm. Pasternack PE3W14822 2.92mm male to SMA male right angle cable assembly is constructed with PE-SR402AL coax.

PE3W18224

Pasternack Enterprises

Key Specifications, Connector Series 1: QMA, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: UHF, Connector Gender 2: Female, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: LMR-195, RF Cable Type: LMR-195, RF Cable Impedance: 50 Ohm. QMA Male to UHF Female Cable Using LMR-195 Coax. PE3W18224 is a QMA male to UHF female cable using LMR-195 coax. This Pasternack QMA male to UHF female cable assembly uses a 50 Ohm QMA for connector 1 and a 50 Ohm UHF for connector 2. Our male QMA to female UHF cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE3W18224 QMA male to UHF female cable assembly is constructed with LMR-195 coax, * LMR™ is a trademark of Times Microwave Systems.

PE38822

Pasternack Enterprises

PE3C10382-24

Pasternack Enterprises

Key Specifications, Connector 1 Series: N, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Right Angle, Connector 1 Impedance: 50 Ohm, Connector 2 Series: TNC, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Tri-Metal, RF Cable Part Number: TCOM-195, RF Cable Type: TCOM-195, RF Cable Impedance: 50 Ohm, Length, Max: 24 inches. N Male Right Angle to TNC Male Low Loss Cable 24 Inch Length Using TCOM-195 Coax With Times Microwave Components., Radio frequency assembly N male right angle to TNC male low loss cable 24 inch length using TCOM-195 coax with Times Microwave components from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The N male right angle to TNC male low loss cable 24 inch length using TCOM-195 coax with Times Microwave components, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom type N to TNC cable assembly orders will the ship same business day as well. Pasternack RF coax low loss cable assembly is built with right angle a type N cable connection on one end and a TNC cable connection on the other. Our low loss right angle a type N to a TNC cable assembly has male gender on end 1 and male on end 2. PE3C10382-24 can also be known as a low loss right angle type N plug to TNC plug cable assembly and will be shipped the same day as it is purchased. This RF cable assembly with a 0.5-inch diameter has copper as the cable's inner conducting material and PE (F) dielectric type. This cable assembly employs durable and flexible materials, and with a 2-inch bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. Our PE3C10382-24 RF cable has a PE jacket of 0.195-inch diameter. The flexible RF cable has a between series connection. Type N plug to TNC plug cable assembly PE3C10382-24 is built with TCOM-195 which is a flexible coax type. The Pasternack flexible type N cable assembly is manufactured with right angle type N to TNC cable connectors and has a 50 Ohm impedance, and is triple shielded. Both the connectors have a crimp/solder attachment method and a brass body. Additional dimensions, specifications and CAD drawings for this low loss RF cable are available on our downloadable PDF datasheet. PE3C10382-24 can also be used in the other direction and will be TNC male to right angle type N male cable assembly if the opposite connectivity is required. Low loss type N right angle plug to TNC plug cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality type N to TNC cable assembly for quick shipment worldwide. Variations of type N and TNC cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal type N to TNC low loss RF cable assembly as per your requirements.

1 : $100.99
25 : $96.95
50 : $93.92
100 : $91.9

PE3822-6

Pasternack Enterprises

Key Specifications, Connector Series 1: SMA, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: SMA, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Right Angle, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: RG405/U, RF Cable Type: RG405, RF Cable Impedance: 50 Ohm, Length: 6 inches. SMA Male to SMA Male Right Angle Cable 6 Inch Length Using RG405 Coax., Radio frequency assembly SMA male to SMA male right angle cable 6 inch length using RG405 coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. SMA male to SMA male right angle cable 6 inch length using RG405 coax, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom SMA to SMA cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with SMA cable connection on one end and right angle SMA cable connection on the other. Our SMA to right angle SMA cable assemblies have a male gender on end 1 and male on end 2. This SMA to SMA cable is a male to male coax assembly, PE3822-6, can also be known as a SMA plug to right angle SMA plug cable assembly and will be shipped same-day as it is purchased. SMA plug to SMA plug cable assembly PE3822-6 is built with RG405 which is a semi-rigid coax type. The Pasternack semi-rigid SMA cable assembly is manufactured with SMA to right angle SMA cable connectors, has a 50 Ohm impedance and is single shielded. RF specs on this 12.4 GHz maximum frequency SMA male to SMA right angle male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3822-6 can also be used in the other direction and will be right angle SMA male to SMA male cable assembly if the opposite connectivity is required. SMA plug to SMA right angle plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality SMA to SMA cable assembly for quick shipment worldwide. Variations of SMA cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this SMA male to SMA male right angle cable 6 inch length using RG405 coax.

1 : $82.39
25 : $78.27
50 : $74.15
100 : $70.86

PE38221

Pasternack Enterprises

PE3C10822/BL/HS

Pasternack Enterprises

Key Specifications, Connector 1 Series: SMPS, Connector 1 Gender: Female, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: SMPS, Connector 2 Gender: Female, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Passivated Stainless Steel, RF Cable Part Number: PE-P047HF, RF Cable Type: PE-P047HF, RF Cable Impedance: 50 Ohm. SMPS Female to SMPS Female Cable Using PE-P047HF Coax with HeatShrink., Pasternack’s PE3C10822/BL/HS SMPS female to SMPS female RF cable assembly using PE-P047HF coax is part of one of the largest selections of same-day ship coaxial cables for RF, microwave, and millimeter wave interconnect solutions. These coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, defense/military, telecom antenna tower component jumper connection, production environments, general use, etc. The SMPS female to SMPS female cable, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom SMPS cable assembly orders will ship the same business day as well. Pasternack RF coax cable assembly is built with an SMPS cable connection on one end and an SMPS cable connection on the other. Our SMPS to SMPS cable assembly has a female gender on end 1 and a female on end 2. PE3C10822/BL/HS can also be known as a SMPS jack to SMPS jack cable assembly and will be shipped the same day as it is purchased. This high flex RF cable assembly has copper as the cable’s inner conducting material and PTFE dielectric type. This cable assembly employs durable and flexible materials, and with a 0.1-inch bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. Our PE3C10822/BL/HS RF cable has an FEP jacket of 0.060-inch diameter. This radio frequency cable assembly can withstand temperatures ranging from -65 to 165 degrees C. The high flex RF cable has an in-series connection. This cable assembly has a typical propagation velocity of 70% and a minimum RF shielding of 90 dB. Our SMPS female to SMPS female cable has a maximum VSWR of 1.4:1. This PE3C10822/BL/HS SMPS jack to SMPS jack cable assembly is built with PE-P047HF, which is a high flex coax type. The Pasternack high flex SMPS cable assembly is manufactured with SMPS to SMPS cable connectors, has a 50 Ohm impedance, and is double shielded. Both the connectors have a solder attachment method and a passivated stainless steel body. Additional dimensions, specifications, and CAD drawings for this RF cable are available on our downloadable PDF datasheet. This SMPS jack to SMPS jack cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality SMPS to SMPS cable assembly for quick shipment worldwide. Variations of SMPS cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High-quality custom RF cable assembly products for microwave and millimeter wave radio transmitters, receivers, antenna jumpers, component interconnections, RF test and measurement labs, military/defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment, and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal SMPS to SMPS RF cable assembly as per your requirements.

PE3C4822

Pasternack Enterprises

Key Specifications, Connector Series 1: SMA, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Right Angle, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: SMA, Connector Gender 2: Female, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: Bulkhead, Connector Impedance 2: 50 Ohm, RF Cable Part Number: PE-P086, RF Cable Type: PE-P086, RF Cable Impedance: 50 Ohm. SMA Male Right Angle to SMA Female Bulkhead Cable Using PE-P086 Coax., Radio frequency assembly SMA male right angle to SMA female bulkhead cable using PE-P086 coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. SMA male right angle to SMA female bulkhead cable using PE-P086 coax, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom SMA to SMA cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with right angle SMA cable connection on one end and SMA bulkhead cable connection on the other. Our right angle SMA to SMA cable assemblies have a male gender on end 1 and female on end 2. This SMA to SMA cable is a male to female coax assembly, PE3C4822, can also be known as a right angle SMA plug to SMA jack cable assembly and will be shipped same-day as it is purchased. SMA plug to SMA jack cable assembly PE3C4822 is built with PE-P086 which is a flexible coax type. The Pasternack flexible SMA cable assembly is manufactured with right angle SMA to SMA cable connectors, has a 50 Ohm impedance and is double shielded. RF specs on this 10 GHz maximum frequency SMA right angle male to SMA female bulkhead cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3C4822 can also be used in the other direction and will be SMA female bulkhead to right angle SMA male cable assembly if the opposite connectivity is required. SMA right angle plug to SMA jack bulkhead cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality SMA to SMA cable assembly for quick shipment worldwide. Variations of SMA cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this SMA male right angle to SMA female bulkhead cable using PE-P086 coax.

PE3C8182-24

Pasternack Enterprises

Key Specifications, Connector 1 Series: MCX, Connector 1 Gender: Plug, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: SMP, Connector 2 Gender: Female, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Gold over Nickel, RF Cable Part Number: PE-P086, RF Cable Type: PE-P086, RF Cable Impedance: 50 Ohm, Length, Max: 24 inches. MCX Plug to SMP Female Cable 24 Inch Length Using PE-P086 Coax., Radio frequency assembly MCX plug to SMP female cable 24 inch length using PE-P086 coax from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. The MCX plug to SMP female cable 24 inch length using PE-P086 coax, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom MCX to SMP cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with MCX cable connection on one end and SMP cable connection on the other. Our MCX to SMP cable assemblies have a plug gender on end 1 and female on end 2. PE3C8182-24 can also be known as a MCX male to SMP jack cable assembly and will be shipped same-day as it is purchased. MCX male to SMP jack cable assembly PE3C8182-24 is built with PE-P086 which is a flexible coax type. The Pasternack flexible MCX cable assembly is manufactured with MCX to SMP cable connectors, has a 50 Ohm impedance and is double shielded. RF specs on this MCX plug to SMP female cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3C8182-24 can also be used in the other direction and will be SMP female to MCX plug cable assembly if the opposite connectivity is required. MCX male to SMP jack cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality MCX to SMP cable assembly for quick shipment worldwide. Variations of MCX cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this MCX plug to SMP female cable 24 inch length using PE-P086 coax.

1 : $151.99
25 : $144.39
50 : $136.79
100 : $130.71

PE3C8224

Pasternack Enterprises

Key Specifications, Connector Series 1: 4.1/9.5 Mini DIN, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: 4.3-10, Connector Gender 2: Female, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: TFT-402, RF Cable Type: TFT-402, RF Cable Impedance: 50 Ohm. 4.1/9.5 Mini DIN Male to 4.3-10 Female Low PIM Cable Using TFT-402 Coax Using Times Microwave Components., Radio frequency assembly 4.1/9.5 mini DIN male to 4.3-10 female low PIM cable using TFT-402 coax using Times Microwave components from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack low PIM (Passive Intermodulation, also called Intermod for short) coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. 4.1/9.5 mini DIN male to 4.3-10 female low PIM cable using TFT-402 coax using Times Microwave components, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom 4.1/9.5 mini DIN to 4.3-10 cable assembly orders will ship same day as well. Pasternack RF coax low PIM cable assembly is built with 4.1/9.5 mini DIN cable connection on one end and 4.3-10 cable connection on the other. Our low PIM 4.1/9.5 mini DIN to 4.3-10 cable assemblies have a male gender on end 1 and female on end 2. This 4.1/9.5 mini DIN to 4.3-10 cable is a male to female coax assembly, PE3C8224, can also be known as a low PIM 4.1/9.5 mini DIN plug to 4.3-10 jack cable assembly and will be shipped same-day as it is purchased. 4.1/9.5 mini DIN plug to 4.3-10 jack cable assembly PE3C8224 is built with TFT-402 which is a flexible coax type. The Pasternack low passive intermodulation flexible 4.1/9.5 Mini DIN cable assembly is manufactured with 4.1/9.5 mini DIN to 4.3-10 cable connectors, has a 50 Ohm impedance and is double shielded. RF specs on this 3 GHz maximum frequency low PIM 4.1/9.5 mini DIN male to 4.3-10 female cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3C8224 can also be used in the other direction and will be 4.3-10 female to 4.1/9.5 mini DIN male cable assembly if the opposite connectivity is required. Low PIM 4.1/9.5 mini DIN plug to 4.3-10 jack cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality 4.1/9.5 mini DIN to 4.3-10 cable assembly for quick shipment worldwide. Variations of 4.1/9.5 mini DIN cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this 4.1/9.5 mini DIN male to 4.3-10 female low PIM cable using TFT-402 coax using Times Microwave components.

PE3C8227-150CM

Pasternack Enterprises

Key Specifications, Connector Series 1: 4.1/9.5 Mini DIN, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: 4.3-10, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Right Angle, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: TFT-402, RF Cable Type: TFT-402, RF Cable Impedance: 50 Ohm, Length: 59.06 inches. 4.1/9.5 Mini DIN Male to 4.3-10 Male Right Angle Low PIM Cable 150 CM Length Using TFT-402 Coax Using Times Microwave Components., Radio frequency assembly 4.1/9.5 mini DIN male to 4.3-10 male right angle low PIM cable 150 cm length using TFT-402 coax using Times Microwave components from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack low PIM (Passive Intermodulation, also called Intermod for short) coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. 4.1/9.5 mini DIN male to 4.3-10 male right angle low PIM cable 150 cm length using TFT-402 coax using Times Microwave components, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom 4.1/9.5 mini DIN to 4.3-10 cable assembly orders will ship same day as well. Pasternack RF coax low PIM cable assembly is built with 4.1/9.5 mini DIN cable connection on one end and right angle 4.3-10 cable connection on the other. Our low PIM 4.1/9.5 mini DIN to right angle 4.3-10 cable assemblies have a male gender on end 1 and male on end 2. This 4.1/9.5 mini DIN to 4.3-10 cable is a male to male coax assembly, PE3C8227-150CM, can also be known as a low PIM 4.1/9.5 mini DIN plug to right angle 4.3-10 plug cable assembly and will be shipped same-day as it is purchased. 4.1/9.5 mini DIN plug to 4.3-10 plug cable assembly PE3C8227-150CM is built with TFT-402 which is a flexible coax type. The Pasternack low passive intermodulation flexible 4.1/9.5 Mini DIN cable assembly is manufactured with 4.1/9.5 mini DIN to right angle 4.3-10 cable connectors, has a 50 Ohm impedance and is double shielded. RF specs on this 3 GHz maximum frequency low PIM 4.1/9.5 mini DIN male to 4.3-10 right angle male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3C8227-150CM can also be used in the other direction and will be right angle 4.3-10 male to 4.1/9.5 mini DIN male cable assembly if the opposite connectivity is required. Low PIM 4.1/9.5 mini DIN plug to 4.3-10 right angle plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality 4.1/9.5 mini DIN to 4.3-10 cable assembly for quick shipment worldwide. Variations of 4.1/9.5 mini DIN cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this 4.1/9.5 mini DIN male to 4.3-10 male right angle low PIM cable 150 cm length using TFT-402 coax using Times Microwave components.

1 : $109.99
25 : $104.49
50 : $98.99
100 : $94.59

PE3C8227-60

Pasternack Enterprises

Key Specifications, Connector Series 1: 4.1/9.5 Mini DIN, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: 4.3-10, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Right Angle, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: TFT-402, RF Cable Type: TFT-402, RF Cable Impedance: 50 Ohm, Length: 60 inches. 4.1/9.5 Mini DIN Male to 4.3-10 Male Right Angle Low PIM Cable 60 Inch Length Using TFT-402 Coax Using Times Microwave Components., Radio frequency assembly 4.1/9.5 mini DIN male to 4.3-10 male right angle low PIM cable 60 inch length using TFT-402 coax using Times Microwave components from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack low PIM (Passive Intermodulation, also called Intermod for short) coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. 4.1/9.5 mini DIN male to 4.3-10 male right angle low PIM cable 60 inch length using TFT-402 coax using Times Microwave components, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom 4.1/9.5 mini DIN to 4.3-10 cable assembly orders will ship same day as well. Pasternack RF coax low PIM cable assembly is built with 4.1/9.5 mini DIN cable connection on one end and right angle 4.3-10 cable connection on the other. Our low PIM 4.1/9.5 mini DIN to right angle 4.3-10 cable assemblies have a male gender on end 1 and male on end 2. This 4.1/9.5 mini DIN to 4.3-10 cable is a male to male coax assembly, PE3C8227-60, can also be known as a low PIM 4.1/9.5 mini DIN plug to right angle 4.3-10 plug cable assembly and will be shipped same-day as it is purchased. 4.1/9.5 mini DIN plug to 4.3-10 plug cable assembly PE3C8227-60 is built with TFT-402 which is a flexible coax type. The Pasternack low passive intermodulation flexible 4.1/9.5 Mini DIN cable assembly is manufactured with 4.1/9.5 mini DIN to right angle 4.3-10 cable connectors, has a 50 Ohm impedance and is double shielded. RF specs on this 3 GHz maximum frequency low PIM 4.1/9.5 mini DIN male to 4.3-10 right angle male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3C8227-60 can also be used in the other direction and will be right angle 4.3-10 male to 4.1/9.5 mini DIN male cable assembly if the opposite connectivity is required. Low PIM 4.1/9.5 mini DIN plug to 4.3-10 right angle plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality 4.1/9.5 mini DIN to 4.3-10 cable assembly for quick shipment worldwide. Variations of 4.1/9.5 mini DIN cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this 4.1/9.5 mini DIN male to 4.3-10 male right angle low PIM cable 60 inch length using TFT-402 coax using Times Microwave components.

1 : $111.99
25 : $106.39
50 : $100.79
100 : $96.31

TE Connectivity

2822353-1

TE Connectivity

SWS,ECONOSEAL,CVTY DIA,8.2,BLK,NBR Connector Seal & Plug Type: Single Wire Seal (SWS) Cavity Diameter: 6.35 mm Cavity Diameter: .25 in Operating Temperature Range: -30 – 105 °C Operating Temperature Range: -22 – 221 °F Single Wire Seal (SWS) 6.35 mm | Connector Seal & Cavity Plug | Part Number: 2822353-1 | Internal Number: 2822353-1 | TE Connectivity
RoHS : Compliant

20,000 : $0.11
10,000 : $0.13
5,000 : $0.18
2,000 : $0.23
1,000 : $0.35
100 : $0.42

36,798

2382224-1

TE Connectivity

EP 2.5 RCPT CONTACT, 26-22 AWG,Low IF Contact Mating Area Plating Material: Tin (Sn) Contact Type: Socket Wire Size: 26 – 22 AWG Product Terminates To: Wire & Cable Contact Current Rating (Max): 4.2 A Tin (Sn) Socket 26 – 22 AWG Wire & Cable | Connector Contact | Part Number: 2382224-1 | Internal Number: 2382224-1 | TE Connectivity
RoHS : Compliant

2,500 : $0.02
1,000 : $0.02
500 : $0.02
250 : $0.03
100 : $0.03
50 : $0.03
25 : $0.04
10 : $0.04
1 : $0.06

17,095

2822541-1

TE Connectivity

PUSH-PUSH MICRO SIM CONNECTOR Compatible Card: SIM/SAM SIM Card Product Type: Push-Push Number of Positions: 6 Number of Loaded Positions: 6 Contact Current Rating (Max): .5 A SIM/SAM Push-Push 6 | Sim Card Connector | Part Number: 2822541-1 | Internal Number: 2822541-1 | TE Connectivity
RoHS : Compliant

1,000 : $1.04
500 : $1.21
250 : $1.27
50 : $1.37
25 : $1.5
10 : $1.56
1 : $1.81

13,460

643182-2

TE Connectivity

UMNL STR/REL ADAPTER CAP Strain Relief Accessory Type: Strain Relief Adapter Primary Product Material: Nylon Primary Product Color: Brick Red White UL Flammability Rating: UL 94V-0 Packaging Method: Bag Strain Relief Adapter Nylon Brick Red UL 94V-0 | Connector Strain Relief | Part Number: 643182-2 | Internal Number: 643182-2 | TE Connectivity
RoHS : Compliant

1,000 : $0.39
100 : $0.53
10 : $0.65
1 : $0.82

5,586

2282268-2

TE Connectivity

10POS,NANOMQS,REC HSG,CODB Nominal Voltage Architecture: 12 V Number of Positions: 10 Connector & Housing Type: Housing for Female Terminals Connector System: Wire-to-Board Mating Tab Width: .5 mm Nanomqs 0.50 Mm Connector | 12 V 10 Housing for Female Terminals Wire-to-Board | Part Number: 2282268-2 | Internal Number: 2282268-2 | .5 mm | TE Connectivity
RoHS : Compliant

10,000 : $0.59
5,000 : $0.73
2,500 : $0.98
1,000 : $1.3
500 : $1.95
100 : $2.34

4,935

5-2337822-1

TE Connectivity

DISCR.ETH.MAG. 10/100 SINGLE SMT Modular Jack Filter Type: Discrete Magnetic Filter Number of Loaded Positions: 16 Data Rate: .1 Gb/s .01 Gb/s Contact Mating Area Plating Material: Nickel (Ni) Contact Base Material: Phosphor Bronze Discrete Magnetic Filter 16 .1 Gb/s Nickel (Ni) | Discr.eth.mag | Part Number: 5-2337822-1 | Internal Number: 5-2337822-1 | TE Connectivity
RoHS : Compliant

10,000 : $6.33
5,000 : $6.47
2,500 : $6.6
1,000 : $6.75
500 : $6.89
250 : $7.03
100 : $7.16
50 : $7.31
25 : $7.45
10 : $7.59
1 : $7.74

3,894

2842482-2

TE Connectivity

2P TB HDR VT (180) w/ Flg 3.5, GN Number of Positions: 2 Terminal Block Connector Type: Header Connector System: Wire-to-Board Centerline (Pitch): .137 in Centerline (Pitch): 3.5 mm Push-In PCB Terminal Blocks: Time Saving Connector | 2 Header Wire-to-Board .137" | Part Number: 2842482-2 | Internal Number: 2842482-2 | .137" | TE Connectivity
RoHS : Compliant

10,000 : $0.96
5,000 : $0.98
2,500 : $1.0
1,000 : $1.02
500 : $1.04
250 : $1.07
100 : $1.09
50 : $1.11
25 : $1.13
10 : $1.15
1 : $1.17

2,746

2822366-1

TE Connectivity

.070 ECONOSEAL PLUG ASSY 3P Nominal Voltage Architecture: 12 V Number of Positions: 3 Connector & Housing Type: Housing for Female Terminals Connector System: Wire-to-Wire Mating Tab Width: 1.8 mm Econoseal & Connector Housing | 12 V 3 Housing for Female Terminals Wire-to-Wire | Part Number: 2822366-1 | Internal Number: 2822366-1 | 1.8 mm | TE Connectivity
RoHS : Compliant

10,000 : $0.57
5,000 : $0.72
2,500 : $0.96
1,000 : $1.27
500 : $1.91
100 : $2.29

2,578

2337822-4

TE Connectivity

DISCR.ETH.MAG. 10/100 SINGLE SMT POE Modular Jack Filter Type: Discrete Magnetic Filter Power over Ethernet Number of Loaded Positions: 16 Data Rate: .01 Gb/s .1 Gb/s Contact Mating Area Plating Material: Nickel (Ni) Contact Base Material: Phosphor Bronze Discrete Magnetic Filter Power over Ethernet 16 .01 Gb/s Nickel (Ni) | Discr.eth.mag | Part Number: 2337822-4 | Internal Number: 2337822-4 | TE Connectivity
RoHS : Compliant

500 : $13.08
250 : $13.54
100 : $13.99
50 : $14.44
25 : $14.89
10 : $15.35
1 : $15.79

522

1-2382274-1

TE Connectivity

2POS,1.6X0.6,TAB HSG ASSY,SLD,COD A Nominal Voltage Architecture: 12 V 48 V 24 V Number of Positions: 2 Connector & Housing Type: Housing for Male Terminals Connector System: Wire-to-Wire Mating Tab Width: 1.6 mm Heavy Duty Sealed Connector Series Housing | 12 V | Part Number: 1-2382274-1 | Internal Number: 1-2382274-1 | 1.6 mm | TE Connectivity
RoHS : Compliant

1 : $2.72

443

2822346-1

TE Connectivity

ECONO-J MK-2 PLUG ASSY 6P Number of Positions: 6 Connector & Housing Type: Housing for Female Terminals Connector System: Wire-to-Wire Mating Tab Width: 1.8 mm Mating Tab Width: .07 in Econoseal & Connector Housing | 6 Housing for Female Terminals Wire-to-Wire 1.8 mm | Part Number: 2822346-1 | Internal Number: 2822346-1 | TE Connectivity
RoHS : Compliant

2,500 : $0.76
1,000 : $0.95
500 : $1.13
250 : $1.44
100 : $1.89
50 : $2.27

356

1-208223-1

TE Connectivity

CPC RCPT ASSEMBLY SIZE 13-9 Number of Positions: 9 Connector Product Type: Connector Assembly Operating Voltage: 250 VDC Connector System: Wire-to-Board Wire-to-Panel Sealable: Yes Circular Power Connector | 9 Connector Assembly 250 VDC Wire-to-Board | Part Number: 1-208223-1 | Internal Number: 1-208223-1 | TE Connectivity
RoHS : Compliant

100 : $67.12
50 : $70.31
25 : $73.51
10 : $76.71
1 : $79.9

100

T1082241240-000

TE Connectivity

H24BPR H130 -TG/SHC-2M40 Hood & Base Connector Product Type: Hood Cable Entry Location: Top & Side Hood & Base Locking Device Type: Screwlock Sealable: Yes Hood Top & Side Screwlock | Rectangular Connector Hoods & Base | Part Number: T1082241240-000 | Internal Number: T1082241240-000 | TE Connectivity
RoHS : Compliant

10 : $60.44
1 : $67.15

1735482-2

TE Connectivity

0.8FH,R17H.5,060,08/Sn,TR,SC PCB Connector Type: PCB Mount Receptacle PCB Mount Orientation: Vertical Connector System: Board-to-Board Board-to-Board Configuration: Mezzanine (Stacking) Number of Positions: 60 PCB Mount Receptacle Vertical Board-to-Board Mezzanine (Stacking) | PCB Header & Receptacle | Part Number: 1735482-2 | Internal Number: 1735482-2 | TE Connectivity
RoHS : Compliant

1,000 : $7.61
500 : $7.83
250 : $8.07
100 : $8.34
50 : $8.58
1 : $9.42

2-208224-2

TE Connectivity

CPC RECPT ASSEMBLY SIZE 23-37 Number of Positions: 37 Connector Product Type: Connector Assembly Operating Voltage: 250 VDC Connector System: Wire-to-Board Wire-to-Panel Sealable: No Circular Power Connector | 37 Connector Assembly 250 VDC Wire-to-Board | Part Number: 2-208224-2 | Internal Number: 2-208224-2 | TE Connectivity
RoHS : Compliant

100 : $72.79
50 : $76.26
25 : $79.72
10 : $83.19
1 : $86.65

Venkel Ltd.

C0805C0G500-822JNE

VENKEL LTD

Chip Capacitor;0805;C0G;50V;8200pF;�5%
RoHS : Compliant

9,000

PWCR0805-VK-822JT

VENKEL LTD

Pulse Withstanding CR;0805;1/2W;�100PPM;8.2K;�5%
RoHS : Compliant

HPTF0603-SC-1822DT

VENKEL LTD

High Power Thin Film CR;0603;1/6W;�50PPM;18.2K;�0.5%
RoHS : Compliant

HPTF2010-UE-1822FT

VENKEL LTD

High Power Thin Film CR;2010;1/3W;�25PPM;18.2K;�1%
RoHS : Compliant

MELFC0204-TZ-1822FT

VENKEL LTD

MELF Coated Thin Film CR;0204;1/4W;�15PPM;18.2K;�1%
RoHS : Compliant

MELFC0204-ZE-1822CT

VENKEL LTD

MELF Coated Thin Film CR;0204;2/5W;�25PPM;18.2K;�0.25%
RoHS : Compliant

MELFC0204-ZZ-1822DT

VENKEL LTD

MELF Coated Thin Film CR;0204;2/5W;�15PPM;18.2K;�0.5%
RoHS : Compliant

MELFC0207-XP-1822CT

VENKEL LTD

MELF Coated Thin Film CR;0207;1W;�5PPM;18.2K;�0.25%
RoHS : Compliant

MELFM0207-VC-1822FT

VENKEL LTD

MELF Molded Thin Film CR;0207;1/2W;�50PPM;18.2K;�1%
RoHS : Not Compliant

MELFM0207-VE-1822BT

VENKEL LTD

MELF Molded Thin Film CR;0207;1/2W;�25PPM;18.2K;�0.1%
RoHS : Not Compliant

HPTF1210-UE-1822DT

VENKEL LTD

High Power Thin Film CR;1210;1/3W;�25PPM;18.2K;�0.5%
RoHS : Compliant

HPTF1210-UN-1822CT

VENKEL LTD

High Power Thin Film CR;1210;1/3W;�10PPM;18.2K;�0.25%
RoHS : Compliant

PWCR0805-TK-1822FT

VENKEL LTD

Pulse Withstanding CR;0805;1/4W;�100PPM;18.2K;�1%
RoHS : Compliant

CRS0805-8W-822JT

VENKEL LTD

Anti-Sulfuration CR;0805;1/8W;8.2K;�5%
RoHS : Compliant

C1210C0G500-822FNE

VENKEL LTD

Chip Capacitor;1210;C0G;50V;8200pF;�1%
RoHS : Compliant

Vyrian

2-2822979-3

TE Connectivity

IC Socket, LGA3647, 3647 Contact(s), Surface Mount
RoHS : Compliant

13,117

PIC12F1822T-E/MF

Microchip Technology Inc

RISC Microcontroller, 8-Bit, FLASH, PIC12 CPU, 32MHz, CMOS, PDSO8
RoHS : Compliant

11,306

AD8224ACPZ-RL

Analog Devices Inc

Instrumentation Amplifier, 2 Func, 300uV Offset-Max, 1.5MHz Band Width
RoHS : Compliant

10,318

AD822AR-3V

Analog Devices Inc

Operational Amplifier, 2 Func, 1500uV Offset-Max, BIPolar, PDSO8
RoHS : Not Compliant

10,182

MAX4822ETP+T

Analog Devices Inc

Buffer/Inverter Based Peripheral Driver, 8 Driver, BICMOS, PQCC20
RoHS : Compliant

10,001

MAX6822SUK+T

Analog Devices Inc

Power Supply Management Circuit, Adjustable, 1 Channel, +2.93V, BICMOS, PDSO5
RoHS : Compliant

9,100

PMP10822.4

Texas Instruments

8,993

ACH3218-223-TD01

TDK Corporation

Ferrite Chip, 1 Function(s), 20V, 1.5A
RoHS : Compliant

8,890

ADS7822EC/250G4

Texas Instruments

ADC, Successive Approximation, 12-Bit, 1 Func, 1 Channel, Serial Access, CMOS, PDSO8
RoHS : Compliant

7,903

PT4822N

Texas Instruments

DC-DC Regulated Power Supply Module, 3 Output, 35W, Hybrid
RoHS : Not Compliant

7,257

5228226-1

TE Connectivity

BNC-BNC, Panel Mount, Female-Female, Jack-jack
RoHS : Compliant

7,095

ADS7822E

Texas Instruments

ADC, Successive Approximation, 12-Bit, 1 Func, 1 Channel, Serial Access, CMOS, PDSO8

6,624

AD7822BN

Analog Devices Inc

ADC, Flash Method, 8-Bit, 1 Func, 1 Channel, Parallel, 8 Bits Access, CMOS, PDIP20
RoHS : Not Compliant

6,132

AD8220TRMZ-EP-R7

Analog Devices Inc

Instrumentation Amplifier, 1 Func, 250uV Offset-Max, 1.5MHz Band Width, PDSO8
RoHS : Compliant

5,557

AD8225AR-REEL

Analog Devices Inc

Instrumentation Amplifier, 1 Func, 325uV Offset-Max, 0.9MHz Band Width, PDSO8
RoHS : Not Compliant

5,234

Waytek, Inc.

7100008223

3M IDC TERMINAL T-TAP BLUE 18 TO 14 GA MATE WITH 31512 OR 31712

50 : $0.2677
200 : $0.2534
500 : $0.2355
1,000 : $0.2259

111,922

HL8-22-14

NSPA

22-14GA Closed End Connector Clear / Blue Dashes, sealed up to four wires

10 : $0.933
50 : $0.8349
100 : $0.7572
200 : $0.7302
500 : $0.7065
1,000 : $0.6794

1,309

15326822

Aptiv PLC

5 Way Female Sealed GT 150 Connector DELPHI 15326822

1 : $1.7918
50 : $1.6088
100 : $1.4637
200 : $1.4132
500 : $1.3691
1,000 : $1.3186

1,225

28224306710

Lear Corporation

Lear Mak8 Plus Female Terminal 2.5-4.0mm2 Tin Plated Reel 600/Reel

600 : $2.6599
3,000 : $2.6599

1,200

28225306710-L

Lear Corporation

Lear Mak8 Plus Female Terminal 6.0-10.0mm2 In Plated Reel 600/Reel

600 : $2.7099
3,000 : $2.7099

1,200

33482-2101

Molex

20 Circuit Dual Row MX150 Male Connector No CPA * Replaced 38416 *
RoHS : Compliant

1 : $2.67
10 : $2.4256
50 : $2.2366
100 : $1.9477
200 : $1.8255
500 : $1.7588

1,157

929822

TE Connectivity

TE Female Power Timer Terminal Socket 20-18ga Loose Piece

10 : $1.2062
50 : $1.0757
100 : $0.977
200 : $0.9452
500 : $0.9135
1,000 : $0.8782

1,121

28224306710-L

Lear Corporation

Lear Mak8 Plus Terminals 2.5-4.0 mm2 Tin Plated (Long Seal) Loose

1 : $4.1457
10 : $3.763
50 : $3.476
100 : $3.0136
200 : $2.8382
500 : $2.7107

905

28225306710-L

Lear Corporation

Lear Mak8 Plus Terminals 6.0-10.0 mm2 Tin Plated (Long Seal) Loose

1 : $4.2227
10 : $3.8329
50 : $3.5405
100 : $3.0695
200 : $2.8909
500 : $2.761

889

3298225.ZXM10

Littelfuse Inc

ZCASE MEGA Fuse 32V M10 225A
RoHS : Compliant

1 : $9.51
10 : $8.49
50 : $7.81
100 : $7.51
200 : $7.3
500 : $7.09

277

82-2124

Grote Industries Inc

Grote 82-2124 recessed toggle switch plate is a replacement plate for Grote 82-2123 toggle switch assemblies. It supports SPST toggle switch layouts, comes in a pack quantity of 1, and is designed as a recessed plate accessory for panel-mounted switches.

1 : $4.0976
50 : $3.4311
100 : $2.992
200 : $2.813
500 : $2.6829

233

882-267-003

Littelfuse Inc

3 Position Flex-Midi Bus Bar 45610 45611

1 : $11.48
10 : $10.56
50 : $9.83
100 : $9.34
200 : $8.83
500 : $8.5

222

3298225.Z

Littelfuse Inc

225A ZCase Single Mega Starter Fuse
RoHS : Compliant

1 : $7.15
10 : $6.35
50 : $5.87
100 : $5.68
200 : $5.49
500 : $5.33

199

41-822

Pollak

Back-Up Alarm 107DB Pollak 41-822 REPLACED WAYTEK PN 48002

1 : $67.04
5 : $63.28
10 : $61.27
50 : $58.25
100 : $55.49

882-267-002

Littelfuse Inc

2 Position Flex-Midi Bus Bar (Vendor Disco'd)

1 : $6.34
10 : $5.76
50 : $5.3
100 : $4.99
200 : $4.67
500 : $4.48

Win Source Electronics

ACH3218-223-TD01

TDK Corporation

FILTER LC(T) SMD
RoHS : Compliant

310 : $1.0866
235 : $1.212
180 : $1.2538
130 : $1.2956
85 : $1.3374
35 : $1.6299

80,000

DRV8220DRLR

Texas Instruments

20-V, 1-A H-BRIDGE MOTOR DRIVER / Bipolar Motor Driver Power MOSFET PWM SOT-563
RoHS : Compliant

540 : $0.5591
430 : $0.5819
335 : $0.6046
235 : $0.65
150 : $0.6728
70 : $0.7182

36,950

NRF51822-CEAA-R

Nordic Semiconductor

IC RF TXRX+MCU BLUETOOTH 62UFBGA
RoHS : Compliant

365 : $0.9323
290 : $0.9701
225 : $1.008
160 : $1.0838
100 : $1.1218
50 : $1.1975

34,890

RTL8221B-VB-CG

Realtek Semiconductor

Ethernet Transceiver SGMII QFN-48 Drivers, Receivers, Transceivers RoHS

176 : $1.9093
132 : $2.1296
102 : $2.203
74 : $2.2764
48 : $2.3499
20 : $2.8638

26,000

ADS7822E/2K5

Texas Instruments

IC ADC 12 BIT 200KHZ 8VSSOP
RoHS : Compliant

61 : $4.9619
46 : $5.5344
35 : $5.7252
26 : $5.9161
17 : $6.1069
7 : $7.4428

16,700

AD8226ARZ-RL7

Analog Devices Inc

107 : $2.8168
86 : $2.9313
66 : $3.0459
46 : $3.2749
30 : $3.3894
14 : $3.6184

16,490

AD8221AR-REEL

Analog Devices Inc

IC OPAMP INSTR 825KHZ 8SOIC
RoHS : Not Compliant

17 : $18.6364
13 : $19.394
10 : $20.1516
7 : $21.6667
5 : $22.4243
3 : $23.9394

7,650

AD7822BRUZ

Analog Devices Inc

IC ADC 8BIT PAR 2MSPS 20TSSOP
RoHS : Compliant

27 : $12.4715
21 : $13.9105
16 : $14.3902
12 : $14.8699
8 : $15.3496
3 : $18.7072

5,369

ADS7822E

Texas Instruments

12-Bit, High-Speed, 2.7V microPower Sampling ANALOG-TO-DIGITAL CONVERTER

61 : $4.9619
46 : $5.5344
35 : $5.7252
26 : $5.9161
17 : $6.1069
7 : $7.4428

5,000

AD8223ARM

Analog Devices Inc

IC INST AMP 1 CIRCUIT 8MSOP
RoHS : Not Compliant

103 : $3.2899
82 : $3.4236
63 : $3.5573
44 : $3.8248
29 : $3.9585
14 : $4.226

5,000

AD8220ARMZ-R7

Analog Devices Inc

IC OPAMP INSTR 1.5MHZ RRO 8MSOP / INST Amp Single R-R O/P ±18V/36V 8-Pin MSOP T/R
RoHS : Compliant

5 : $65.7252
4 : $68.397
3 : $71.0688
2 : $76.4123
1 : $79.084

3,640

AD8221BRZ-RL

Analog Devices Inc

IC INST AMP 1 CIRCUIT 8SOIC / Instrumentation Amplifier 1 Circuit 8-SOIC
RoHS : Compliant

5 : $71.3588
4 : $74.2596
3 : $77.1604
2 : $82.9619
1 : $85.8626

2,310

AD8225ARZ

Analog Devices Inc

IC OPAMP INSTR 900KHZ 8SOIC
RoHS : Compliant

23 : $13.3933
17 : $14.9386
13 : $15.4538
10 : $15.9689
7 : $16.484
3 : $20.0899

1,600

AD8222ACPZ

Analog Devices Inc

Instrumentation Amplifiers Dual Precision InAmp

9 : $33.7405
7 : $37.6336
6 : $38.9313
4 : $40.2291
3 : $41.5268
1 : $50.6107

1,500

ACH4518-222-TD01

TDK Corporation

FILTER LC(T) SMD
RoHS : Compliant

97 : $3.477
73 : $3.8782
56 : $4.012
41 : $4.1457
27 : $4.2794
11 : $5.2156

1,213

822-CTACAC-R Distributor

Link URL