 |
Electronic Components Datasheet Search |
|
|
Electronic Components Datasheet Search |
|
8327-AL1A-R Distributor |
| Distributor | Part # | Manufacturer | Description | Price | Qty. BuyNow | |
 Master Electronics | 178327-2 | TE Connectivity | The 178327-2 is a 16-position double-row free-hanging tab housing from the Dynamic D-3100D series with a 3.81mm pitch. RoHS : Compliant |
| 96,738 | |
| 1-2300832-7 | TE Connectivity | Heat Sink Clip RoHS : Compliant |
| 72 | ||
| CMB-083-27GNN-R-A/08 | Carling Technologies | CMB08327GNNRA08 RoHS : Compliant |
| 0 | ||
| CLB-083-27E5N-W-A/08 | Carling Technologies | Circuit Breaker RoHS : Compliant |
| 0 | ||
| CMB-083-27G3N-W-A | Carling Technologies | CMB08327G3NWA RoHS : Compliant |
| 0 | ||
| CMB-083-27GNN-W-A/08 | Carling Technologies | CMB08327GNNWA08 RoHS : Compliant |
| 0 | ||
| CMB-083-27GNN-B-A/08 | Carling Technologies | CMB08327GNNBA08 RoHS : Compliant |
| 0 | ||
| CMB-083-27GNN-W-A | Carling Technologies | CMB08327GNNWA RoHS : Compliant |
| 0 | ||
| CLB-083-27ENN-W-R/08 | Carling Technologies | CLB08327ENNWR08 RoHS : Compliant |
| 0 | ||
| CLB-183-27ENN-R-A | Carling Technologies | RoHS : Compliant |
| 0 | ||
| CLB-083-27J7N-B-F/08 | Carling Technologies | CLB08327J7NBF/08 RoHS : Compliant |
| 0 | ||
| 83278-B00000200-21 | Honeywell Sensing and Control | Industrial Pressure Sensors Transportation Pressure Switches RoHS : Compliant |
| 0 | ||
| 83276-B00000400-01 | Honeywell Sensing and Control | Active Non-RoHS Compliant (Pressure Type) Pressure Sensor RoHS : Compliant |
| 0 | ||
| CLB-083-27E7N-W-A | Carling Technologies | CLB08327E7NWA RoHS : Compliant |
| 0 | ||
| CMB-083-27G3N-B-A | Carling Technologies | CMB08327G3NBA RoHS : Compliant |
| 0 | ||
 Avnet Americas | 742C083273JP | CTS Corporation | - Tape and Reel (Alt: 742C083273JP) RoHS : Compliant |
| 15,000 | |
| FDMC8327L | onsemi | N-Channel PowerTrench? MOSFET 40V, 14A, 9.7mO - Tape and Reel (Alt: FDMC8327L) RoHS : Compliant |
| 6,000 | ||
| IRF8327STRPBF | Infineon Technologies AG | Trans MOSFET N-CH 30V 14A 6-Pin Direct-FET SQ T/R 4.8k - Tape and Reel (Alt: IRF8327STRPBF) RoHS : Compliant |
| 4,800 | ||
| 178327-2 | TE Connectivity | - Rail/Tube (Alt: 178327-2) RoHS : Compliant |
| 4,200 | ||
| 505448-3272 | Molex | MLP1.25 DUAL RA SMT SN ETP 32P RED - Tape and Reel (Alt: 5054483272) RoHS : Compliant |
| 0 | ||
| S41C083272FP | CTS Corporation | - Tape and Reel (Alt: S41C083272FP) RoHS : Compliant | 0 | |||
| S41X083270GP | CTS Corporation | - Tape and Reel (Alt: S41X083270GP) RoHS : Compliant | 0 | |||
| 1-2300832-7 | TE Connectivity | - Trays (Alt: 1-2300832-7) RoHS : Compliant |
| 0 | ||
| 87832-7262 | Molex | MGRID HDR SHRD SMT/CAP T&R .05AULF 46CKT - Tape and Reel (Alt: 0878327262) RoHS : Compliant |
| 0 | ||
| 742C083274JP | CTS Corporation | - Tape and Reel (Alt: 742C083274JP) RoHS : Compliant |
| 0 | ||
| MA-291-008-327-A5200 | Molex | - Bulk (Alt: MA-291-008-327-A5200) RoHS : Not Compliant |
| 0 | ||
| S42C083271FP | CTS Corporation | - Tape and Reel (Alt: S42C083271FP) RoHS : Compliant | 0 | |||
| S42X083272FP | CTS Corporation | - Tape and Reel (Alt: S42X083272FP) RoHS : Compliant | 0 | |||
| RJE581883276N | Amphenol Corporation | 8P8C, THR, RA, CAT5E, SHIELD, STANDARD PROFILE, WITH LEDS - Tape and Reel (Alt: RJE581883276N) RoHS : Not Compliant | 0 | |||
| 87832-7430 | Molex | MGRID HDR SHRD SMT/PGSCAP.38AULFT&R 50CK - Bulk (Alt: 0878327430) RoHS : Compliant |
| 0 | ||
 Newark | QTP832.76812B20R | QANTEK Technology Corporation | Crystal, 32.768Khz, 12.5Pf, 8.7 X 3.8Mm; |Qantek Technology Corporation QTP832.76812B20R RoHS : Compliant |
| 14,420 | |
| QTP832.76812B20R | QANTEK Technology Corporation | Crystal, 32.768Khz, 12.5Pf, 8.7 X 3.8Mm; |Qantek Technology Corporation QTP832.76812B20R RoHS : Compliant |
| 14,420 | ||
| FDMC8327L | onsemi | Pwr Mosfet, N Channel, 40V, 14A; |Onsemi FDMC8327L RoHS : Compliant |
| 5,893 | ||
| 178327-2 | TE Connectivity | Connector, Header, 16Pos, 2Row, 3.81Mm; |Te Connectivity Amp 178327-2 RoHS : Compliant |
| 1,545 | ||
| R38-32.768-12.5 | Raltron Electronics Corporation | Crystal, 32.768Khz, 12.5Pf/8.3Mm X 3.1Mm; |Raltron R38-32.768-12.5 RoHS : Compliant |
| 1,000 | ||
| FDMC8327L | onsemi | Mosfet, N-Ch, 40V, 8Mlp; |Onsemi FDMC8327L RoHS : Compliant |
| 913 | ||
| FDMC8327L | onsemi | Mosfet, N-Ch, 40V, 8Mlp; |Onsemi FDMC8327L RoHS : Compliant |
| 913 | ||
| 8000078327 | Weidmüller Interface GmbH & Co. KG | Terminal Block, Header, 8Pos, Th; Gender:Header; Pitch Spacing:7.5Mm; No. Of Positions:8Positions; Rated Current:30.6A; Rated Voltage:630V; Block Orientation:Through Hole 270°; Product Range:Omnimate 4.0 Mhs Series Rohs Compliant: Yes RoHS : Compliant |
| 27 | ||
| MP008327 | SPC Multicomp | Type K Thermocouple; |Multicomp Pro MP008327 RoHS : Compliant |
| 26 | ||
| 168327-E | TE Connectivity | Cable Assy, 32P Idc R/A Rcpt-Rcpt, 0.1M; |Te Connectivity Erni 168327-E RoHS : Compliant |
| 18 | ||
| PCWND-08327-19N3 | L-com Inc | Passive Cwdm, Compact Demux, 8 Channel; |L-Com PCWND-08327-19N3 RoHS : Not Compliant |
| 5 | ||
| PCWND-08327-1953 | L-com Inc | Passive Cwdm, Compact Demux, 8 Channel; |L-Com PCWND-08327-1953 RoHS : Not Compliant |
| 5 | ||
| 3-138-327 | Schurter Electronic Components | Power Line Filter, Industrial, 520Vac; |Schurter 3-138-327 RoHS : Compliant |
| 1 | ||
| 8327 | Keystone Electronics Corp | Led Spacer; |Keystone 8327 RoHS : Compliant |
| 0 | ||
| 8327 | Abbatron | Standoff; |Abbatron Hh Smith 8327 RoHS : Not Compliant |
| 0 | ||
 RS | OKLPC5569R0-EVB (1883274) | OKdo | E1 DEVELOPMENT BOARD, SRAM 320 KB, DUAL-CORE ARM CORTEX M33, MICROCONTROLLER |
| 81 | |
| 1832798 | Phoenix Contact | DIN RAIL SCREW 3.81MM 16AWG 160V 8A 8 POSITION COMBICON CONTROL SERIES RoHS : Compliant |
| 50 | ||
| 1832743 (MCVK 1 5/ 3-G-3 81) | Phoenix Contact | DIN RAIL CONNECTOR SCREW 3.81MM 16AWG 160V 8A 3 POSITION COMBICON MCVK SERIES |
| 43 | ||
| 1883276 | RS Pro | DEEP GROOVE BALL BEARING 8 X 22 X 7MM SEALED END CLOSURE C3 PLAIN RACE |
| 34 | ||
| 1883279 | RS Pro | DEEP GROOVE BALL BEARING 10 X 26 X 8MM SEALED END CLOSURE C3 PLAIN RACE |
| 27 | ||
| T18SP6DQ-38327 (38327) | Banner Engineering Corp | PHOTOELECTRIC SENSOR, DIFFUSE, PNP, 400MM RANGE 10MS RESPONSE TIME, 38327, T18 |
| 16 | ||
| 3-128-327 | Schurter Electronic Components | CIRCUIT BREAKER, ROCKER, 2P, ON-OFF, BLACK, WHITE I/O LEGEND, 10A, TA36 SERIES RoHS : Compliant |
| 10 | ||
| 34.81.7.060.9024 (7083279) | FINDER SpA | SOLID STATE PCB/PLUG-IN RELAY, SPST-NO 6A, 60V DC INPUT, 1.524V DC OUTPUT |
| 6 | ||
| 2338327 | RS Pro | M21 SP21 PANEL FRONT NUT MOUNT CONNECTOR FEMALE 2 PIN |
| 5 | ||
| 9832713 | WIKA Instrument LP | ANALOG POSITIVE PRESS GAUGE BOTTOM ENTRY 3000PSI, CONNECTION SIZE NPT 1/2 |
| 2 | ||
| 7832772 | RS Pro | INSTRUMENT CABLE 2 WIRES STRANDED BLACK PVC FM2R 7X0.2MM 328FT (100M) |
| 1 | ||
| PBAT46UHFMTA (83276) | Banner Engineering Corp | FIBER OPTICS, PLASTIC FIBER, OPPOSED, LENGTH 2M, THREAD, LENS, HIGH FLEX |
| 1 | ||
| DSNU-25-150-PPS-A (1908327) | Festo | CYLINDER, STANDARD, DSNU-25-150-PPS-A |
| 1 | ||
| 8327 | Keystone Electronics Corp | SPACER; SELF-ALIGING; BI-LEAD; LENGTH .400; NYLON 6/6; FOR LED SIZE T-1-3/4 |
| 0 | ||
| 8327 | HH Smith | STANDOFF; ROUND; ALUMINUM; 4-40 THREAD; 1/4" OD; 1" LENGTH; FULL THREAD |
| 0 | ||
 Bisco Industries | MS27183-27 | Superior Washer & Gasket Company | 404 | |||
| 6252C-SS-0832-7 | Amatom Electronic Hardware | 223 | ||||
| 6235-SS-0832-7 | Amatom Electronic Hardware | 189 | ||||
| 8156-SS-0832-7 | Amatom Electronic Hardware | 77 | ||||
| 8572-SS-0832-7 | Amatom Electronic Hardware | 50 | ||||
| NAS514P832-7B | Crescent Manufacturing | 31 | ||||
| 9767-SS-0832-7 | Amatom Electronic Hardware | 15 | ||||
| 8527-SS-0832-7 | Amatom Electronic Hardware | 9 | ||||
| 10308-SS-0832-7 | Amatom Electronic Hardware | 7 | ||||
| 9757-SS-0832-7 | Amatom Electronic Hardware | 6 | ||||
| 10724-SS-0832-7 | Amatom Electronic Hardware | 6 | ||||
| 10315-SS-0832-7 | Amatom Electronic Hardware | 5 | ||||
| 6105-SS-0832-7 | Amatom Electronic Hardware | 2 | ||||
| 9777-SS-0832-7 | Amatom Electronic Hardware | 1 | ||||
| 10227-SS-0832-7 | Amatom Electronic Hardware | 1 | ||||
 Rochester Electronics | IRF8327STRPBF | Infineon Technologies AG | Power Field-Effect Transistor, 60A I(D), 30V, 0.0073ohm, 1-Element, N-Channel, Silicon, Metal-oxide Semiconductor FET RoHS : Compliant |
| 822 | |
AD8327ARU-REEL | Analog Devices Inc | Video Processor Driver Consumer Video 20-SOP T/R RoHS : Not Compliant |
| 5,000 | ||
| AD8327ARU | Analog Devices Inc | Line Driver, 1 Func, 1 Driver, PDSO20 RoHS : Not Compliant |
| 3,633 | ||
| AD8327ARUZ | Analog Devices Inc | Line Driver, 1 Func, 1 Driver, PDSO20 RoHS : Compliant |
| 4,022 | ||
ADS8327IBPWG4 | Texas Instruments | IC ADC 1 CONV 16Bits SAR 4-Wire Serial 20-SOP Tube RoHS : Compliant |
| 12 | ||
| ADS8327IBRSAT | Texas Instruments | IC ADC 1 CONV 16Bits SAR SPI 16-QFN T/R RoHS : Compliant |
| 4,606 | ||
ADS8327IRSAR | Texas Instruments | IC ADC 1 CONV 16Bits SAR SPI 16-QFN T/R RoHS : Compliant |
| 17,800 | ||
| ADS8327IRSAT | Texas Instruments | IC ADC 1 CONV 16Bits SAR SPI 16-QFN T/R RoHS : Compliant |
| 4,300 | ||
| ADS8327IPW | Texas Instruments | IC ADC 1 CONV 16Bits SAR SPI 16-SOP Tube RoHS : Compliant |
| 22 | ||
| ADS8327IBPW | Texas Instruments | IC Video Decoder I²C 10Bits 1.71V - 1.89V 1.65V - 2V 48-QFP Tray RoHS : Compliant |
| 10,817 | ||
| ADS8327IBPWR | Texas Instruments | IC ADC 1 CONV 16Bits SAR SPI 16-SOP T/R RoHS : Compliant |
| 113 | ||
| ADS8327IBRSAR | Texas Instruments | IC ADC 1 CONV 16Bits SAR SPI 16-QFN T/R RoHS : Compliant |
| 8,453 | ||
LM8327JGR8/NOPB | Texas Instruments | IC VOLT REG Fixed 1 REG 2.5V 250mA SOT-23-5 T/R RoHS : Compliant |
| 14,000 | ||
| FDMC8327L | Fairchild Semiconductor Corporation | MOSFET N-Channel 40V 12A (Ta), 14A (Tc) 8-SON T/R RoHS : Compliant |
| 410 | ||
| IRF8327STRPBF | International Rectifier | Power Field-Effect Transistor, 60A I(D), 30V, 0.0073ohm, 1-Element, N-Channel, Silicon, Metal-oxide Semiconductor FET RoHS : Compliant |
| 4,538 | ||
 Sager | 8327 | Keystone Electronics Corp | LED Mounting Hardware .40 T1 3/4 BI-LEAD .197 (5mm) DIA |
| 0 | |
| 0878327162 | Molex | Headers & Wire Housings MGrid Hdr Shrd SMT/Cap T&R .05AuLF 44Ckt RoHS : Compliant |
| 0 | ||
| 583274-3 | TE Connectivity | Standard Card Edge Connectors KEYING PLUG RoHS : Compliant | 0 | |||
| CLB08327E8NWH08 | Carling Technologies | Circuit Breakers | 0 | |||
| CMB-083-27G3N-B-J-XBS1 | Carling Technologies | Circuit Breakers | 0 | |||
| CMB-083-27GNN-R-A/08 | Carling Technologies | Circuit Breakers CMB08327GNNRA08 RoHS : Compliant |
| 0 | ||
| 1-2300832-7 | TE Connectivity | Heat Sinks TE Connectivity RoHS : Compliant |
| 0 | ||
| CLB-083-27E5N-W-A/08 | Carling Technologies | Rocker Switches CLB08327E5NWA08 RoHS : Compliant |
| 0 | ||
| CMB-083-27G3N-W-A | Carling Technologies | Circuit Breakers CMB08327G3NWA RoHS : Compliant |
| 0 | ||
| CMB-083-27GNN-W-A/08 | Carling Technologies | Circuit Breakers CMB08327GNNWA08 RoHS : Compliant |
| 0 | ||
| CMB08327G3NWA08 | Carling Technologies | Circuit Breakers | 0 | |||
| CMB-083-27GNN-B-A/08 | Carling Technologies | Circuit Breakers CMB08327GNNBA08 RoHS : Compliant |
| 0 | ||
| CMB-083-27GNN-W-A | Carling Technologies | Circuit Breakers CMB-083-27GNN-W-A RoHS : Compliant |
| 0 | ||
| 468-32773-001 | Carling Technologies | Switch Actuators | 0 | |||
| CLB-083-27ENN-W-R/08 | Carling Technologies | Littelfuse CLB08327ENNWR08 RoHS : Compliant |
| 0 | ||
 TME | 178327-2 | TE Connectivity | Connector: wire-board; male; data; Inom: 8A; 250V; PIN: 16; shrouded RoHS : Compliant |
| 96,732 | |
| 1832785-1 | TE Connectivity | Connector: jumper cable; data |
| 1,657 | ||
| 83274 | HELUKABEL | Wire; LiYCY UL; 10x24AWG; shielded,tinned copper braid; PVC; grey RoHS : Compliant |
| 56 | ||
| 8327 | Keystone Electronics Corp | Spacer sleeve; LEDs,LED; Øout: 5mm; ØLED: 5mm; L: 10.2mm; natural |
| 0 | ||
| 1832756 | Phoenix Contact | Connector: pluggable terminal block; male; power supply; 8A; 320V RoHS : Compliant |
| 0 | ||
| 1832798 | Phoenix Contact | Connector: pluggable terminal block; male; power supply; 8A; 320V RoHS : Compliant |
| 0 | ||
| 83275 | HELUKABEL | Wire; LiYCY UL; 12x24AWG; shielded,tinned copper braid; PVC; grey RoHS : Compliant |
| 0 | ||
| 183-27-1 | IRIMO | Socket: Torx®-bit; TX27; 1/2"; 60mm |
| 0 | ||
| 10058327 | Fischer Elektronik GmbH & Co KG | Connector: pin strips; pin header; male; data; PIN: 32; THT; 3A; 250V |
| 0 | ||
| 2908327 | Phoenix Contact | Relay: interface; Ucoil: 24VDC; SPDT; 6A; 6A/250VAC; 6A/250VDC |
| 0 | ||
| EM8327 | Zakłady Kablowe BITNER | Wire; YKSY; 10G2.5mm2; unshielded; 600V,1kV; Cu; wire; black |
| 0 | ||
| 08 3274 000 000 | Binder UK Ltd | 696; Cable gland: cable |
| 0 | ||
| 1832769 | Phoenix Contact | Connector: pluggable terminal block; male; power supply; 8A; 320V RoHS : Compliant |
| 0 | ||
| 49.7083-27 | Stäubli Electrical Connectors | Laboratory connector: 4mm banana; socket; 1kV; 24A; brown |
| 0 | ||
| 1832772 | Phoenix Contact | Connector: pluggable terminal block; male; power supply; 8A; 320V RoHS : Compliant |
| 0 | ||
 Ameya Holding Limited | BD18327EFV-ME2 | ROHM Semiconductor | 适用于两轮机动车转向指示灯的50V耐压 1.5A 单通道LED驱动器 RoHS : Compliant |
| 2,475 | |
 ComSIT USA | TC3832768KHZ | auris GmbH | TUNING FORK CRYSTAL Parallel - Fundamental Quartz Crystal, 0.032768MHz Nom RoHS : Not Compliant | 37,750 | ||
| M820832768KHZ20PPM | PETERMANN-TECHNIK GmbH | SMD WATCH CRYSTAL Parallel - Fundamental Quartz Crystal, 0.032768MHz Nom RoHS : Compliant | 17,000 | |||
| HD64F38327HV | Renesas Electronics Corporation | IC MCU H8/300L 8Bit 1 Core FLASH 60kB (60k x 8) 8MHz 80-QFP Tray RoHS : Not Compliant | 22 | |||
 Interstate Connecting Components | 8327 | Keystone Electronics Corp | LED SPACER |
| 75 | |
| 12934383-2727 | Glenair Inc | D8 - CONNECTOR, ACCESS | 5 | |||
| 1-2300832-7 | TE Connectivity | HEAT SINK CLIP RoHS : Compliant |
| 0 | ||
| 10-074832-73G | Amphenol Industrial Operations | Solder Plug, OD | 0 | |||
| RJE581883276N | Amphenol Commercial | 8P8C, THR, RA, CAT5E, SHIELD, | 0 | |||
| 178327-2 | TE Connectivity | 16-P POST HDR D-3100D VERT .38 RoHS : Compliant |
| 0 | ||
| 1-2308327-1 | TE Connectivity | FULL METAL HOODS SIZE 3 (1) RoHS : Compliant |
| 0 | ||
| 168327-E | TE Connectivity | IDCCS SMC 1,27 32 * AU AUI 10 RoHS : Compliant |
| 0 | ||
| 3-282832-7 | TE Connectivity | TERMI-BLOK PIN HEADER 5MM STAC RoHS : Compliant | 0 | |||
| CA8327-000 | TE Connectivity | MXSU-3331-SE04 | 0 | |||
| 2342832-7 | TE Connectivity | AVC16M FLAT AIO RGB R 500MM/2X RoHS : Compliant |
| 0 | ||
| 282832-7 | TE Connectivity | TERMI-BLOK PIN HEAD 180 7P. 5 RoHS : Compliant |
| 0 | ||
| 2448327-1 | TE Connectivity | SRS MULTI RoHS : Compliant | 0 | |||
| 249-8608-327 | ITT Interconnect Solutions | 249-8608-327 | 0 | |||
| 7-2151832-7 | TE Connectivity | OCEAN_2.0_SPARE_PART_KIT-044F0 |
| 0 | ||
 NexGen Digital | 9398327 | General Motors Corporation | 123,100 | |||
| DT-38-32.768KHZ | KDS Daishinku Corp | 2,560 | ||||
 PEI Genesis | ATM283-27 | Abbotec Incorporated | RoHS : Compliant |
| 0 | |
| MS25041-8-327 | Dialight |
| 0 | |||
| GTC08-32-7PW-023-LC | Amphenol Corporation |
| 0 | |||
| GTS08-32-7P-023-116 | Amphenol Corporation |
| 0 | |||
| GTS08-32-7PW | Amphenol Corporation |
| 0 | |||
| GTC08-32-7PY-025-LC | Amphenol Corporation |
| 0 | |||
| GTS08-32-7PY-025 | Amphenol Corporation |
| 0 | |||
| GTC08-32-7PY-023-B30 | Amphenol Corporation |
| 0 | |||
| GTC08-32-7PY-023-B30-LC | Amphenol Corporation |
| 0 | |||
| GTC08-32-7PW-B30 | Amphenol Corporation |
| 0 | |||
| GTS08-32-7P | Amphenol Corporation |
| 0 | |||
| GTS08-32-7PZ-023 | Amphenol Corporation |
| 0 | |||
| C5278327-5 | SOURIAU-SUNBANK |
| 0 | |||
| GTC08-32-7PZ-025-B30 | Amphenol Corporation |
| 0 | |||
| GTC08-32-7PZ-B30 | Amphenol Corporation |
| 0 | |||
 Powell Electronics | 178327-2 | TE Connectivity | Headers & Wire Housings RoHS : Compliant |
| 63,843 | |
| 8-327717-1 | TE Connectivity | PIDG SPD 22-16 COMM 22-18MIL 4 RoHS : Compliant |
| 660 | ||
| EK8327-000 | TE Connectivity | MOLDED PART EK8327-000 |
| 198 | ||
| 8-327944-1 | TE Connectivity | Connectors RoHS : Compliant |
| 178 | ||
| 83278-B00000200-21 | Honeywell Sensing and Control | Legacy Pressure Switches |
| 154 | ||
| 183277-000 | TE Connectivity | shrink tube RoHS : Compliant |
| 61 | ||
| 1-2300832-7 | TE Connectivity | TE COMPONENT (REF 1-2300832-7) RoHS : Compliant |
| 48 | ||
| 1-282832-7 | TE Connectivity | Terminal Blocks RoHS : Compliant |
| 40 | ||
| D83276-000 | TE Connectivity | adapters RoHS : Compliant |
| 35 | ||
| 83272-B00300030-25 | Honeywell Sensing and Control | Switch |
| 33 | ||
| 83271-00000040-04 | Honeywell Sensing and Control | Switch |
| 13 | ||
| 6-747832-7 | TE Connectivity | D-Sub Connectors RoHS : Not Compliant |
| 11 | ||
| 75-68832-79S | Amphenol Corporation | CONNECTOR |
| 10 | ||
| 83276-B00000350-01 | Honeywell Sensing and Control | Switch |
| 5 | ||
| 10-214832-7P | Amphenol Corporation | CONNECTOR |
| 4 | ||
 Richardson RFPD | SI5341B-D08327-GMR | Skyworks Solutions Inc | Clock Generator 10MHz to 750MHz-IN 350MHz-OUT 64-P RoHS : Compliant | 0 | ||
| 742C08327R4FP | CTS Corporation | 742C08327R4FP RoHS : Not Compliant | 0 | |||
| 741C083271JP | CTS Corporation | Res Thick Film Array 270 Ohm 5% 0.25W(1/4W) ±200pp RoHS : Compliant |
| 0 | ||
| 019832-72 | Wakefield-Vette | EXTRUDED HEAT SINK RoHS : Compliant | 0 | |||
| 742C083270JP | CTS Corporation | Res Thick Film Array 27 Ohm 5% 0.25W(1/4W) ±200ppm RoHS : Compliant |
| 0 | ||
| LFSPXO083276REEL | IQD Frequency Products | Surface Mount Crystal Oscillator RoHS : Compliant | 0 | |||
| SI5341B-D08327-GM | Skyworks Solutions Inc | Clock Generator 10MHz to 750MHz-IN 350MHz-OUT 64-P RoHS : Compliant | 0 | |||
| 5832-7501-000 | Radiall | Between Series Adapt RoHS : Not Compliant | 0 | |||
| 742C083271JP | CTS Corporation | Res Thick Film Array 270 Ohm 5% 0.25W(1/4W) ±200pp RoHS : Compliant |
| 0 | ||
| R433832700 | Radiall | RFDIRECTIONAL COUPLR RoHS : Compliant | 0 | |||
 Chip 1 Exchange | CFS308-32.768KDZF-UB | INSTOCK | 8,913 | |||
| 742C083272JP | CTS Corporation | INSTOCK RoHS : Compliant | 7,777 | |||
| QTF-M28 32.768KHZ | INSTOCK | 1,716 | ||||
| NC38-32.768KHZ | Fox Electronics | INSTOCK RoHS : Not Compliant | 192 | |||
| 902832735 | INSTOCK | 184 | ||||
| 10683270 | Thomson Components-Mostek Corp | INSTOCK | 118 | |||
| 10683270- | THOM | INSTOCK | 81 | |||
 Avnet Abacus | 1783274 | Phoenix Contact | MVSTBW 25 9ST508 BK MVSTBW259ST508BK (Alt: 1783274) RoHS : Compliant | 0 | ||
| 1832797 | Phoenix Contact | GMSTB 25 3ST762 BK H1L GMSTB253ST762BKH1L (Alt: 1832797) RoHS : Compliant | 0 | |||
| 583274-3 | TE Connectivity | Connector Accessories Keying Plug GlassFilled Polyester (Alt: 583274-3) RoHS : Compliant | 0 | |||
| 178327-2 | TE Connectivity | Conn Power M 16 POS 381mm Solder ST ThruHole 16 Terminal 1 Port Tube (Alt: 178327-2) RoHS : Compliant | 0 | |||
| 178327-2 | TE Connectivity | Conn Power M 16 POS 381mm Solder ST ThruHole 16 Terminal 1 Port Tube (Alt: 178327-2) RoHS : Compliant | 0 | |||
| 8-327636-2 | TE Connectivity | (Alt: 8-327636-2) RoHS : Compliant | 0 | |||
| 1-2308327-1 | TE Connectivity | Backshell PlugReceptacle Zinc Alloy 3 Shell Size (Alt: 1-2308327-1) RoHS : Compliant | 0 | |||
| 743C083274JP | CTS Corporation | Fixed Network Resistor 270 kohm Isolated 4 Resistors 0805 2012 Metric Concave 5 100 V - Tape and Reel (Alt: 743C083274JP) RoHS : Compliant | 0 | |||
| 742C083274JP | CTS Corporation | Fixed Network Resistor 270 kohm Isolated 4 Resistors 0603 1608 Metric Concave 5 50 V - Tape and Reel (Alt: 742C083274JP) RoHS : Compliant | 0 | |||
| 742X083272JP | CTS Corporation | Fixed Network Resistor 27 kohm Isolated 4 Resistors 0603 1608 Metric Convex 5 50 V - Tape and Reel (Alt: 742X083272JP) RoHS : Compliant | 0 | |||
| S42X083270JP | CTS Corporation | Fixed Network Resistor 27 ohm Isolated 4 Resistors 0603 1608 Metric Convex 5 50 V 63 mW - Tape and Reel (Alt: S42X083270JP) RoHS : Compliant | 0 | |||
| S42C083274JP | CTS Corporation | Fixed Network Resistor 270 kohm Isolated 4 Resistors 0603 1608 Metric Concave 5 50 V - Tape and Reel (Alt: S42C083274JP) RoHS : Compliant | 0 | |||
| 741C083270JP | CTS Corporation | Fixed Network Resistor 27 ohm Isolated 4 Resistors 0402 1005 Metric Concave 5 25 V - Tape and Reel (Alt: 741C083270JP) RoHS : Compliant | 0 | |||
| S42C083273JP | CTS Corporation | Fixed Network Resistor 27 kohm Isolated 4 Resistors 0603 1608 Metric Concave 5 50 V - Tape and Reel (Alt: S42C083273JP) RoHS : Compliant | 0 | |||
| KHS400JR-83-27RAA | Vitrohm Portuguesa LDA | Resistor 27 Ohm 5 4 W Axial Leaded Wirewound Power - Tape and Reel (Alt: KHS400JR-83-27RAA) RoHS : Compliant | 0 | |||
Avnet Asia | 742C083274JP | CTS Corporation | (Alt: 742C083274JP) RoHS : Compliant | 0 | ||
| 10138327-10132ALF | Amphenol Corporation | PCI EXPRESS TH-10138327-10132ALF (Alt: 10138327-10132ALF) RoHS : Compliant | 0 | |||
| BD18327EFV-ME2 | ROHM Semiconductor | LED Driver 1-CH PWM 50V 1.5A 20-Pin HTSSOP-B EP Emboss T/R (Alt: BD18327EFV-ME2) RoHS : Compliant | 0 | |||
| Z34081832700J6EC10 | Vishay Intertechnologies | (Alt: Z34081832700J6EC10) RoHS : Compliant | 0 | |||
| 10138327-10130ALF | Amphenol Corporation | PCI EXPRESS TH-10138327-10130ALF (Alt: 10138327-10130ALF) RoHS : Compliant | 0 | |||
| G8327A038 | Diodes Incorporated | Crystal, Tuning Fork, 32.768 kHz, SMD, 3.2mm x 1.5mm x 0.9mm, G8 (Alt: G8327A038) RoHS : Compliant | 0 | |||
| G8327A044 | Diodes Incorporated | (Alt: G8327A044) RoHS : Compliant | 0 | |||
| FDMC8327L | onsemi | N-Channel PowerTrench? MOSFET 40V, 14A, 9.7mO (Alt: FDMC8327L) RoHS : Compliant | 0 | |||
| Z34081832709J6DC04 | Vishay Intertechnologies | VISZ34081832709J6DC04 5W WIRE WOUND RESI (Alt: Z34081832709J6DC04) RoHS : Compliant | 0 | |||
| 2183271060 | Molex | (Alt: 2183271060) RoHS : Compliant | 0 | |||
 Avnet Silica | G8327A050 | Diodes Incorporated | Tuning Fork Quartz Crystals G8 Series Quartz Crystal 32768 kHz SMD Crystal (Alt: G8327A050) RoHS : Compliant | 0 | ||
| G8327A048 | Diodes Incorporated | Crystal Plastic SMD3215 TR 3K (Alt: G8327A048) RoHS : Compliant | 0 | |||
| G8327A059 | Diodes Incorporated | Crystal Tuning Fork 32768 kHz SMD 32mm x 15mm x 09mm 18 pF G8 (Alt: G8327A059) RoHS : Compliant | 0 | |||
| G8327A038 | Diodes Incorporated | Crystal Tuning Fork 32768 kHz SMD 32mm x 15mm x 09mm G8 (Alt: G8327A038) RoHS : Compliant | 0 | |||
| G8327A049 | Diodes Incorporated | G8 Series Quartz Crystal 32768 kHz SMD Crystal 32 x 15mm (Alt: G8327A049) RoHS : Compliant | 0 | |||
| G8327A047 | Diodes Incorporated | Crystal 32678kHz 2Pin Surface Mount TR (Alt: G8327A047) RoHS : Compliant | 0 | |||
| G8327A039 | Diodes Incorporated | (Alt: G8327A039) RoHS : Compliant | 0 | |||
| G8327A060 | Diodes Incorporated | Crystal Plastic SMD3215 TR 3K (Alt: G8327A060) RoHS : Compliant | 0 | |||
| G8327A045 | Diodes Incorporated | Crystal Tuning Fork 32768 kHz SMD 32mm x 15mm x 09mm G8 (Alt: G8327A045) RoHS : Compliant | 0 | |||
| FDMC8327L | onsemi | NChannel PowerTrench MOSFET 40V 14A 97mO (Alt: FDMC8327L) RoHS : Compliant | 0 | |||
| G8327A058 | Diodes Incorporated | Crystal 32768KHz 125pF 2Pin SMD TR (Alt: G8327A058) RoHS : Compliant | 0 | |||
| G8327A046 | Diodes Incorporated | Crystal Tuning Fork 32768 kHz SMD 32mm x 15mm x 09mm G8 (Alt: G8327A046) RoHS : Compliant | 0 | |||
| C18327_BRIANNA-7X1-W | LEDIL | LINEAR LENSRECTANG7 POS2800 X 360MM (Alt: C18327_BRIANNA-7X1-W) RoHS : Compliant | 0 | |||
 Component Electronics, Inc | 742C083270J | CTS Corporation | IN STOCK SHIP TODAY RoHS : Not Compliant |
| 12,250 | |
| 742C083270JTR | CTS Corporation | IN STOCK SHIP TODAY |
| 7,000 | ||
| 2322-180-83279 | Vishay BCcomponents | IN STOCK SHIP TODAY |
| 4,500 | ||
| 742C083271J | CTS Corporation | IN STOCK SHIP TODAY RoHS : Not Compliant |
| 4,450 | ||
| 743C083270JTR | CTS Corporation | IN STOCK SHIP TODAY |
| 3,900 | ||
| NC38-327 | Fox Electronics | IN STOCK SHIP TODAY |
| 400 | ||
| CRA06S08327R0FTA | Vishay Intertechnologies | IN STOCK SHIP TODAY RoHS : Compliant | 300 | |||
| NC38-32.768KHZ | CTS Valpey Corporation | IN STOCK SHIP TODAY | 134 | |||
| SCP8-32.768KHZ-TR | Suntsu Electronics Inc | IN STOCK SHIP TODAY | 22 | |||
| WC-38-32.768KHZ | RXD Technologies | IN STOCK SHIP TODAY |
| 10 | ||
 DB Roberts | PFC2P-832-72 | PennEngineering (PEM) | PF,ASSY,SS; PHILLIPS DRIVE 8-32THREAD |
| 3,825 | |
| 10352-SS-0832-7 | Amatom Electronic Hardware |
| 236 | |||
| MS27183-27 | Military Specifications |
| 3 | |||
| 3BT-P8327-00 | Acumnet / Camcar | 0 | ||||
| 20832711 | Essentra Components | 0 | ||||
| 8327-1032-A-22 | RAF Electronic Hardware | 0 | ||||
| 8327-832-A-24 | RAF Electronic Hardware | 0 | ||||
| 48327 | Essentra Components | 0 | ||||
| PFS2-832-72CN | PennEngineering (PEM) | PANEL FASTENER,ASSY,STEEL 8-32THREAD | 0 | |||
| 20832704 | Essentra Components | 0 | ||||
| 20832797 | Essentra Components | 0 | ||||
| 8327-1024-A-22 | RAF Electronic Hardware | 0 | ||||
| 20832766 | Essentra Components | 0 | ||||
| 20832735 | Essentra Components | 0 | ||||
| 20832780 | Essentra Components | 0 | ||||
 EBV Elektronik | FDMC8327L | onsemi | NChannel PowerTrench MOSFET 40V 14A 97mO (Alt: FDMC8327L) RoHS : Compliant | 0 | ||
| C18327_BRIANNA-7X1-W | LEDIL | LINEAR LENSRECTANG7 POS2800 X 360MM (Alt: C18327_BRIANNA-7X1-W) RoHS : Compliant | 0 | |||
 FDH Electronics | 12934383-2727 | SOURIAU-SUNBANK | Backshells & Ac |
| 73 | |
| 38327-2-B | SCS | Magnet Wire | 37 | |||
| 83278-B00000200-21 | Honeywell Sensing and Control | Switches |
| 0 | ||
| 83276-B00000400-01 | Honeywell Sensing and Control | Switches |
| 0 | ||
| 83276-B00000250-05 | Honeywell Sensing and Control | Switches |
| 0 | ||
 Flip Electronics | D338327A28WV | Renesas Electronics Corporation | Stock | 1,460 | ||
| D338327A29WV | Renesas Electronics Corporation | Stock | 1,094 | |||
| DF38327HV | Renesas Electronics Corporation | Stock | 867 | |||
| DF38327WV | Renesas Electronics Corporation | Stock | 334 | |||
 Maritex | SJK-6K8-32.768-12.5-20-40-B | SJK | Quartz crystal; 32.768kHz; 20ppm; 12.5pF |
| 586 | |
| 178327-3 | TE Connectivity | Male Pin Headers; 178327-3; TE CONNECTIVITY; 2; Gold, Tin; 16; Vertical RoHS : Compliant |
| 475 | ||
 Neutron USA | 8000078327 | Weidmüller Interface GmbH & Co. KG | Pluggable Terminal Blocks PCB plug-in connector (board connection), 7.50 mm, Number of poles: 8, Outgoing elbow: 270 RoHS : Compliant |
| 50 | |
| 2832771 | Phoenix Contact | Unmanaged Ethernet Switches FL SWITCH SF 8 TX RoHS : Compliant |
| 50 | ||
| 1832769 | Phoenix Contact | Pluggable Terminal Blocks MCVK 1.5/ 5-G-3.81 RoHS : Compliant |
| 39 | ||
| 3-128-327 | Schurter Electronic Components | Circuit Breakers snap-in, on-off switch, 2pole, rocker: black, marking: I/0-white, front flange: black, 10A RoHS : Compliant |
| 10 | ||
| 8327GL5-30ML | MG Chemicals | Thermal Interface Products Non Silicone Liquid Thermal Gel, Cartridge 30ml, High Temp Soft Gel, Gray |
| 0 | ||
| 8327GL3-30ML | MG Chemicals | Thermal Interface Products Non Silicone Liquid Thermal Gel, Cartridge 30ml, Ultra Soft Gel, White |
| 0 | ||
| 1832798 | Phoenix Contact | DIN Rail Terminal Blocks MCVK 1.5/ 8-G-3.81 RoHS : Compliant |
| 0 | ||
| 2908327 | Phoenix Contact | Industrial Relays RIF-0-RPT-M-24DC/21 |
| 0 | ||
| 2832726 | Phoenix Contact | Ethernet Modules FL SWITCH SF 7 TX/FX RoHS : Compliant |
| 0 | ||
| CFM-A225B-018-327-20 | CUI Inc | DC Fan, Sq120x25 mm, 5 Vdc 0.45A, 1800RPM, 62.8CFM, Tach, 3wire |
| 0 | ||
CFM-A225B-018-327-20 | Same Sky | DC Fans dc axial fan, 120 mm square, 25 mm, 5 Vd RoHS : Compliant |
| 0 | ||
| 1832756 | Phoenix Contact | DIN Rail Terminal Blocks MCVK 1 5/ 4-G-3 81 RoHS : Compliant |
| 0 | ||
| 9768327 | WIKA Instrument LP | Pressure Gauge 232.53 2.5 100PSI 1/4 B SS |
| 0 | ||
| 8327GL6-30ML | MG Chemicals | Thermal Interface Products Non Silicone Liquid Thermal Gel, Cartridge 30ml, Paste like Gel, Gray |
| 0 | ||
| 9832721 | WIKA Instrument LP | Analog Positive Press Gauge Bottom Entry 5000psi, Connection Size NPT 1/2 |
| 0 | ||
 Pasternack Enterprises US | PE3W08327/HS-300 | Pasternack Enterprises | Key Specifications, Connector 1 Series: SMA, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: N, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Right Angle, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Tri-Metal, RF Cable Part Number: LMR-400-UF, RF Cable Type: LMR-400-UF, RF Cable Impedance: 50 Ohm, Length, Max: 300 inches. SMA Male to N Male Right Angle Low Loss Cable 300 Inch Length Using LMR-400-UF Coax with HeatShrink., Radio frequency assembly SMA male to N male right angle low loss cable 300 inch length using LMR-400-UF coax with heatshrink from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The SMA male to N male right angle low loss cable 300 inch length using LMR-400-UF coax with heatshrink, SMA cable like our other Pasternack coaxial cable assemblies, will ship the same day and any custom SMA to type N cable assembly orders will ship same day as well. Pasternack RF coax low loss cable assembly is built with SMA cable connection on one end and right angle N type cable connection on the other. Our low loss SMA to right angle type N cable assemblies have a male gender on end 1 and male on end 2. PE3W08327/HS-300 can also be known as a low loss SMA plug to right angle type N plug cable assembly and will be shipped same-day as it is purchased. SMA plug to type N plug cable assembly PE3W08327/HS-300 is built with LMR-400-UF which is a flexible coax type. The Pasternack flexible SMA cable assembly is manufactured with SMA to right angle N type cable connectors, has a 50 Ohm impedance and is double shielded. RF specs on this 5.8 GHz maximum frequency SMA male to type N right angle male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3W08327/HS-300 can also be used in the other direction and will be right angle type N male to SMA male cable assembly if the opposite connectivity is required. Low loss SMA plug to N type right angle plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality SMA to type N cable assembly for quick shipment worldwide. Variations of SMA cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this SMA male to N male right angle low loss cable 300 inch length using LMR-400-UF coax with heatshrink. |
| 416 | |
| PE3W08327/HS-36 | Pasternack Enterprises | Key Specifications, Connector 1 Series: SMA, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: N, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Right Angle, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Tri-Metal, RF Cable Part Number: LMR-400-UF, RF Cable Type: LMR-400-UF, RF Cable Impedance: 50 Ohm, Length, Max: 36 inches. SMA Male to N Male Right Angle Low Loss Cable 36 Inch Length Using LMR-400-UF Coax with HeatShrink., Radio frequency assembly SMA male to N male right angle low loss cable 36 inch length using LMR-400-UF coax with heatshrink from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The SMA male to N male right angle low loss cable 36 inch length using LMR-400-UF coax with heatshrink, SMA cable like our other Pasternack coaxial cable assemblies, will ship the same day and any custom SMA to type N cable assembly orders will ship same day as well. Pasternack RF coax low loss cable assembly is built with SMA cable connection on one end and right angle type N cable connection on the other. Our low loss SMA to right angle N type cable assemblies have a male gender on end 1 and male on end 2. PE3W08327/HS-36 can also be known as a low loss SMA plug to right angle N type plug cable assembly and will be shipped same-day as it is purchased. SMA plug to type N plug cable assembly PE3W08327/HS-36 is built with LMR-400-UF which is a flexible coax type. The Pasternack flexible SMA cable assembly is manufactured with SMA to right angle type N cable connectors, has a 50 Ohm impedance and is double shielded. RF specs on this 5.8 GHz maximum frequency SMA male to type N right angle male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3W08327/HS-36 can also be used in the other direction and will be right angle N type male to SMA male cable assembly if the opposite connectivity is required. Low loss SMA plug to type N right angle plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality SMA to N type cable assembly for quick shipment worldwide. Variations of SMA cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this SMA male to N male right angle low loss cable 36 inch length using LMR-400-UF coax with heatshrink. |
| 416 | ||
| PE38327 | Pasternack Enterprises | 0 | ||||
| PE3C8327-12 | Pasternack Enterprises | Key Specifications, Connector 1 Series: 7/16 DIN, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Right Angle, Connector 1 Impedance: 50 Ohm, Connector 2 Series: N, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Tri-Metal, RF Cable Part Number: TFT-5G-402, RF Cable Type: TFT-5G-402, RF Cable Impedance: 50 Ohm. 7/16 DIN Male Right Angle to N Male Low PIM Cable 12 Inch Length Using TFT-5G-402 Coax Using Times Microwave Components., Radio frequency assembly 7/16 DIN male right angle to N male low PIM cable 12 inch length using TFT-5G-402 coax using Times Microwave components from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack low PIM (Passive Intermodulation, also called Intermod for short) coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, general use, etc. The 7/16 DIN male right angle to N male low PIM cable 12 inch length using TFT-5G-402 coax using Times Microwave components, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom 7/16 DIN to type N cable assembly orders will ship the same business day as well. Pasternack RF coax low PIM cable assembly is built with a right angle 7/16 DIN cable connection on one end and a type N cable connection on the other. Our low PIM right angle 7/16 DIN to type N cable assembly has a male gender on end 1 and a male on end 2. PE3C8327-12 can also be known as a low PIM right angle 7/16 DIN plug to type N plug cable assembly and will be shipped the same day as it is purchased. This flexible RF cable assembly with a 1.25-inch diameter has copper as the cable's inner conducting material and PTFE dielectric type. 7/16 DIN low PIM cable assemblies from Pasternack are ideal for applications including indoor and outdoor use and plenum rated applications. The minimum bend radius for this cable is 0.75 inches, allowing for a single bend without damaging the cable. Our PE3C8327-12 RF cable has a FEP jacket of 0.160-inch diameter. This radio frequency cable assembly can withstand temperatures ranging from -40 to 125 degrees C. The flexible RF cable has a between series connection. This cable assembly has a typical propagation velocity of 76% and a minimum RF shielding of 80 dB. Our right angle 7/16 DIN male to type N male cable has a maximum VSWR of 1.4:1. 7/16 DIN plug to type N plug cable assembly PE3C8327-12 is built with TFT-5G-402 which is a flexible coax type. The Pasternack low passive intermodulation flexible 7/16 DIN cable assembly is manufactured with right angle 7/16 DIN to type N cable connectors, has a 50 Ohm impedance, and is double shielded. Both the connectors have a solder/solder attachment method and a brass body with tri-metal plating. Additional dimensions, specifications and CAD drawings for this low PIM RF cable are available on our downloadable PDF datasheet. PE3C8327-12 can also be used in the other direction and will be a type N male to right angle 7/16 DIN male cable assembly if the opposite connectivity is required. Low PIM 7/16 DIN right angle plug to type N plug cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality 7/16 DIN to type N cable assembly for quick shipment worldwide. Variations of 7/16 DIN and type N cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal 7/16 DIN to type N low PIM RF cable assembly as per your requirements. |
| 0 | ||
| PE3C8327-48 | Pasternack Enterprises | Key Specifications, Connector 1 Series: 7/16 DIN, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Right Angle, Connector 1 Impedance: 50 Ohm, Connector 2 Series: N, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Tri-Metal, RF Cable Part Number: TFT-5G-402, RF Cable Type: TFT-5G-402, RF Cable Impedance: 50 Ohm. 7/16 DIN Male Right Angle to N Male Low PIM Cable 48 Inch Length Using TFT-5G-402 Coax Using Times Microwave Components., Radio frequency assembly 7/16 DIN male right angle to N male low PIM cable 48 inch length using TFT-5G-402 coax using Times Microwave components from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack low PIM (Passive Intermodulation, also called Intermod for short) coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, general use, etc. The 7/16 DIN male right angle to N male low PIM cable 48 inch length using TFT-5G-402 coax using Times Microwave components, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom 7/16 DIN to type N cable assembly orders will ship the same business day as well. Pasternack RF coax low PIM cable assembly is built with a right angle 7/16 DIN cable connection on one end and a type N cable connection on the other. Our low PIM right angle 7/16 DIN to type N cable assembly has a male gender on end 1 and a male on end 2. PE3C8327-48 can also be known as a low PIM right angle 7/16 DIN plug to type N plug cable assembly and will be shipped the same day as it is purchased. This flexible RF cable assembly with a 1.25-inch diameter has copper as the cable's inner conducting material and PTFE dielectric type. 7/16 DIN low PIM cable assemblies from Pasternack are ideal for applications including indoor and outdoor use and plenum rated applications. The minimum bend radius for this cable is 0.75 inches, allowing for a single bend without damaging the cable. Our PE3C8327-48 RF cable has a FEP jacket of 0.160-inch diameter. This radio frequency cable assembly can withstand temperatures ranging from -40 to 125 degrees C. The flexible RF cable has a between series connection. This cable assembly has a typical propagation velocity of 76% and a minimum RF shielding of 80 dB. Our right angle 7/16 DIN male to type N male cable has a maximum VSWR of 1.4:1. 7/16 DIN plug to type N plug cable assembly PE3C8327-48 is built with TFT-5G-402 which is a flexible coax type. The Pasternack low passive intermodulation flexible 7/16 DIN cable assembly is manufactured with right angle 7/16 DIN to type N cable connectors, has a 50 Ohm impedance, and is double shielded. Both the connectors have a solder/solder attachment method and a brass body with tri-metal plating. Additional dimensions, specifications and CAD drawings for this low PIM RF cable are available on our downloadable PDF datasheet. PE3C8327-48 can also be used in the other direction and will be a type N male to right angle 7/16 DIN male cable assembly if the opposite connectivity is required. Low PIM 7/16 DIN right angle plug to type N plug cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality 7/16 DIN to type N cable assembly for quick shipment worldwide. Variations of 7/16 DIN and type N cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal 7/16 DIN to type N low PIM RF cable assembly as per your requirements. |
| 0 | ||
| PE3C8327-50CM | Pasternack Enterprises | Key Specifications, Connector 1 Series: 7/16 DIN, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Right Angle, Connector 1 Impedance: 50 Ohm, Connector 2 Series: N, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Tri-Metal, RF Cable Part Number: TFT-5G-402, RF Cable Type: TFT-5G-402, RF Cable Impedance: 50 Ohm. 7/16 DIN Male Right Angle to N Male Low PIM Cable 50 CM Length Using TFT-5G-402 Coax Using Times Microwave Components., Radio frequency assembly 7/16 DIN male right angle to N male low PIM cable 50 cm length using TFT-5G-402 coax using Times Microwave components from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack low PIM (Passive Intermodulation, also called Intermod for short) coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, general use, etc. The 7/16 DIN male right angle to N male low PIM cable 50 cm length using TFT-5G-402 coax using Times Microwave components, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom 7/16 DIN to type N cable assembly orders will ship the same business day as well. Pasternack RF coax low PIM cable assembly is built with a right angle 7/16 DIN cable connection on one end and a type N cable connection on the other. Our low PIM right angle 7/16 DIN to type N cable assembly has a male gender on end 1 and a male on end 2. PE3C8327-50CM can also be known as a low PIM right angle 7/16 DIN plug to type N plug cable assembly and will be shipped the same day as it is purchased. This flexible RF cable assembly with a 1.25-inch diameter has copper as the cable's inner conducting material and PTFE dielectric type. 7/16 DIN low PIM cable assemblies from Pasternack are ideal for applications including indoor and outdoor use and plenum rated applications. The minimum bend radius for this cable is 0.75 inches, allowing for a single bend without damaging the cable. Our PE3C8327-50CM RF cable has a FEP jacket of 0.160-inch diameter. This radio frequency cable assembly can withstand temperatures ranging from -40 to 125 degrees C. The flexible RF cable has a between series connection. This cable assembly has a typical propagation velocity of 76% and a minimum RF shielding of 80 dB. Our right angle 7/16 DIN male to type N male cable has a maximum VSWR of 1.4:1. 7/16 DIN plug to type N plug cable assembly PE3C8327-50CM is built with TFT-5G-402 which is a flexible coax type. The Pasternack low passive intermodulation flexible 7/16 DIN cable assembly is manufactured with right angle 7/16 DIN to type N cable connectors, has a 50 Ohm impedance, and is double shielded. Both the connectors have a solder/solder attachment method and a brass body with tri-metal plating. Additional dimensions, specifications and CAD drawings for this low PIM RF cable are available on our downloadable PDF datasheet. PE3C8327-50CM can also be used in the other direction and will be a type N male to right angle 7/16 DIN male cable assembly if the opposite connectivity is required. Low PIM 7/16 DIN right angle plug to type N plug cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality 7/16 DIN to type N cable assembly for quick shipment worldwide. Variations of 7/16 DIN and type N cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal 7/16 DIN to type N low PIM RF cable assembly as per your requirements. |
| 0 | ||
| PE3C8327-150CM | Pasternack Enterprises | Key Specifications, Connector 1 Series: 7/16 DIN, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Right Angle, Connector 1 Impedance: 50 Ohm, Connector 2 Series: N, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Tri-Metal, RF Cable Part Number: TFT-5G-402, RF Cable Type: TFT-5G-402, RF Cable Impedance: 50 Ohm. 7/16 DIN Male Right Angle to N Male Low PIM Cable 150 CM Length Using TFT-5G-402 Coax Using Times Microwave Components., Radio frequency assembly 7/16 DIN male right angle to N male low PIM cable 150 cm length using TFT-5G-402 coax using Times Microwave components from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack low PIM (Passive Intermodulation, also called Intermod for short) coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, general use, etc. The 7/16 DIN male right angle to N male low PIM cable 150 cm length using TFT-5G-402 coax using Times Microwave components, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom 7/16 DIN to type N cable assembly orders will ship the same business day as well. Pasternack RF coax low PIM cable assembly is built with a right angle 7/16 DIN cable connection on one end and a type N cable connection on the other. Our low PIM right angle 7/16 DIN to type N cable assembly has a male gender on end 1 and a male on end 2. PE3C8327-150CM can also be known as a low PIM right angle 7/16 DIN plug to type N plug cable assembly and will be shipped the same day as it is purchased. This flexible RF cable assembly with a 1.25-inch diameter has copper as the cable's inner conducting material and PTFE dielectric type. 7/16 DIN low PIM cable assemblies from Pasternack are ideal for applications including indoor and outdoor use and plenum rated applications. The minimum bend radius for this cable is 0.75 inches, allowing for a single bend without damaging the cable. Our PE3C8327-150CM RF cable has a FEP jacket of 0.160-inch diameter. This radio frequency cable assembly can withstand temperatures ranging from -40 to 125 degrees C. The flexible RF cable has a between series connection. This cable assembly has a typical propagation velocity of 76% and a minimum RF shielding of 80 dB. Our right angle 7/16 DIN male to type N male cable has a maximum VSWR of 1.4:1. 7/16 DIN plug to type N plug cable assembly PE3C8327-150CM is built with TFT-5G-402 which is a flexible coax type. The Pasternack low passive intermodulation flexible 7/16 DIN cable assembly is manufactured with right angle 7/16 DIN to type N cable connectors, has a 50 Ohm impedance, and is double shielded. Both the connectors have a solder/solder attachment method and a brass body with tri-metal plating. Additional dimensions, specifications and CAD drawings for this low PIM RF cable are available on our downloadable PDF datasheet. PE3C8327-150CM can also be used in the other direction and will be a type N male to right angle 7/16 DIN male cable assembly if the opposite connectivity is required. Low PIM 7/16 DIN right angle plug to type N plug cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality 7/16 DIN to type N cable assembly for quick shipment worldwide. Variations of 7/16 DIN and type N cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal 7/16 DIN to type N low PIM RF cable assembly as per your requirements. |
| 0 | ||
| PE3832-72 | Pasternack Enterprises | Key Specifications, Connector Series 1: SMA, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: SMA, Connector Gender 2: Female, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: RG316/U, RF Cable Type: RG316, RF Cable Impedance: 50 Ohm, Length: 72 inches. SMA Male to SMA Female Cable 72 Inch Length Using RG316 Coax., Radio frequency assembly SMA male to SMA female cable 72 inch length using RG316 coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. SMA male to SMA female cable 72 inch length using RG316 coax, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom SMA to SMA cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with SMA cable connection on one end and SMA cable connection on the other. Our SMA to SMA cable assemblies have a male gender on end 1 and female on end 2. This SMA to SMA cable is a male to female coax assembly, PE3832-72, can also be known as a SMA plug to SMA jack cable assembly and will be shipped same-day as it is purchased. SMA plug to SMA jack cable assembly PE3832-72 is built with RG316 which is a flexible coax type. The Pasternack flexible SMA cable assembly is manufactured with SMA to SMA cable connectors, has a 50 Ohm impedance and is single shielded. RF specs on this 3 GHz maximum frequency SMA male to SMA female cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3832-72 can also be used in the other direction and will be SMA female to SMA male cable assembly if the opposite connectivity is required. SMA plug to SMA jack cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality SMA to SMA cable assembly for quick shipment worldwide. Variations of SMA cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this SMA male to SMA female cable 72 inch length using RG316 coax. |
| 0 | ||
| PE3C8327-100CM | Pasternack Enterprises | Key Specifications, Connector 1 Series: 7/16 DIN, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Right Angle, Connector 1 Impedance: 50 Ohm, Connector 2 Series: N, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Tri-Metal, RF Cable Part Number: TFT-5G-402, RF Cable Type: TFT-5G-402, RF Cable Impedance: 50 Ohm. 7/16 DIN Male Right Angle to N Male Low PIM Cable 100 CM Length Using TFT-5G-402 Coax Using Times Microwave Components., Radio frequency assembly 7/16 DIN male right angle to N male low PIM cable 100 cm length using TFT-5G-402 coax using Times Microwave components from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack low PIM (Passive Intermodulation, also called Intermod for short) coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, general use, etc. The 7/16 DIN male right angle to N male low PIM cable 100 cm length using TFT-5G-402 coax using Times Microwave components, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom 7/16 DIN to type N cable assembly orders will ship the same business day as well. Pasternack RF coax low PIM cable assembly is built with a right angle 7/16 DIN cable connection on one end and a type N cable connection on the other. Our low PIM right angle 7/16 DIN to type N cable assembly has a male gender on end 1 and a male on end 2. PE3C8327-100CM can also be known as a low PIM right angle 7/16 DIN plug to type N plug cable assembly and will be shipped the same day as it is purchased. This flexible RF cable assembly with a 1.25-inch diameter has copper as the cable's inner conducting material and PTFE dielectric type. 7/16 DIN low PIM cable assemblies from Pasternack are ideal for applications including indoor and outdoor use and plenum rated applications. The minimum bend radius for this cable is 0.75 inches, allowing for a single bend without damaging the cable. Our PE3C8327-100CM RF cable has a FEP jacket of 0.160-inch diameter. This radio frequency cable assembly can withstand temperatures ranging from -40 to 125 degrees C. The flexible RF cable has a between series connection. This cable assembly has a typical propagation velocity of 76% and a minimum RF shielding of 80 dB. Our right angle 7/16 DIN male to type N male cable has a maximum VSWR of 1.4:1. 7/16 DIN plug to type N plug cable assembly PE3C8327-100CM is built with TFT-5G-402 which is a flexible coax type. The Pasternack low passive intermodulation flexible 7/16 DIN cable assembly is manufactured with right angle 7/16 DIN to type N cable connectors, has a 50 Ohm impedance, and is double shielded. Both the connectors have a solder/solder attachment method and a brass body with tri-metal plating. Additional dimensions, specifications and CAD drawings for this low PIM RF cable are available on our downloadable PDF datasheet. PE3C8327-100CM can also be used in the other direction and will be a type N male to right angle 7/16 DIN male cable assembly if the opposite connectivity is required. Low PIM 7/16 DIN right angle plug to type N plug cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality 7/16 DIN to type N cable assembly for quick shipment worldwide. Variations of 7/16 DIN and type N cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal 7/16 DIN to type N low PIM RF cable assembly as per your requirements. |
| 0 | ||
| PE3C8327-200CM | Pasternack Enterprises | Key Specifications, Connector 1 Series: 7/16 DIN, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Right Angle, Connector 1 Impedance: 50 Ohm, Connector 2 Series: N, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Tri-Metal, RF Cable Part Number: TFT-5G-402, RF Cable Type: TFT-5G-402, RF Cable Impedance: 50 Ohm. 7/16 DIN Male Right Angle to N Male Low PIM Cable 200 CM Length Using TFT-5G-402 Coax Using Times Microwave Components., Radio frequency assembly 7/16 DIN male right angle to N male low PIM cable 200 cm length using TFT-5G-402 coax using Times Microwave components from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack low PIM (Passive Intermodulation, also called Intermod for short) coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, general use, etc. The 7/16 DIN male right angle to N male low PIM cable 200 cm length using TFT-5G-402 coax using Times Microwave components, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom 7/16 DIN to type N cable assembly orders will ship the same business day as well. Pasternack RF coax low PIM cable assembly is built with a right angle 7/16 DIN cable connection on one end and a type N cable connection on the other. Our low PIM right angle 7/16 DIN to type N cable assembly has a male gender on end 1 and a male on end 2. PE3C8327-200CM can also be known as a low PIM right angle 7/16 DIN plug to type N plug cable assembly and will be shipped the same day as it is purchased. This flexible RF cable assembly with a 1.25-inch diameter has copper as the cable's inner conducting material and PTFE dielectric type. 7/16 DIN low PIM cable assemblies from Pasternack are ideal for applications including indoor and outdoor use and plenum rated applications. The minimum bend radius for this cable is 0.75 inches, allowing for a single bend without damaging the cable. Our PE3C8327-200CM RF cable has a FEP jacket of 0.160-inch diameter. This radio frequency cable assembly can withstand temperatures ranging from -40 to 125 degrees C. The flexible RF cable has a between series connection. This cable assembly has a typical propagation velocity of 76% and a minimum RF shielding of 80 dB. Our right angle 7/16 DIN male to type N male cable has a maximum VSWR of 1.4:1. 7/16 DIN plug to type N plug cable assembly PE3C8327-200CM is built with TFT-5G-402 which is a flexible coax type. The Pasternack low passive intermodulation flexible 7/16 DIN cable assembly is manufactured with right angle 7/16 DIN to type N cable connectors, has a 50 Ohm impedance, and is double shielded. Both the connectors have a solder/solder attachment method and a brass body with tri-metal plating. Additional dimensions, specifications and CAD drawings for this low PIM RF cable are available on our downloadable PDF datasheet. PE3C8327-200CM can also be used in the other direction and will be a type N male to right angle 7/16 DIN male cable assembly if the opposite connectivity is required. Low PIM 7/16 DIN right angle plug to type N plug cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality 7/16 DIN to type N cable assembly for quick shipment worldwide. Variations of 7/16 DIN and type N cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal 7/16 DIN to type N low PIM RF cable assembly as per your requirements. |
| 0 | ||
| PE3C8327-60 | Pasternack Enterprises | Key Specifications, Connector 1 Series: 7/16 DIN, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Right Angle, Connector 1 Impedance: 50 Ohm, Connector 2 Series: N, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Tri-Metal, RF Cable Part Number: TFT-5G-402, RF Cable Type: TFT-5G-402, RF Cable Impedance: 50 Ohm. 7/16 DIN Male Right Angle to N Male Low PIM Cable 60 Inch Length Using TFT-5G-402 Coax Using Times Microwave Components., Radio frequency assembly 7/16 DIN male right angle to N male low PIM cable 60 inch length using TFT-5G-402 coax using Times Microwave components from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack low PIM (Passive Intermodulation, also called Intermod for short) coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, general use, etc. The 7/16 DIN male right angle to N male low PIM cable 60 inch length using TFT-5G-402 coax using Times Microwave components, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom 7/16 DIN to type N cable assembly orders will ship the same business day as well. Pasternack RF coax low PIM cable assembly is built with a right angle 7/16 DIN cable connection on one end and a type N cable connection on the other. Our low PIM right angle 7/16 DIN to type N cable assembly has a male gender on end 1 and a male on end 2. PE3C8327-60 can also be known as a low PIM right angle 7/16 DIN plug to type N plug cable assembly and will be shipped the same day as it is purchased. This flexible RF cable assembly with a 1.25-inch diameter has copper as the cable's inner conducting material and PTFE dielectric type. 7/16 DIN low PIM cable assemblies from Pasternack are ideal for applications including indoor and outdoor use and plenum rated applications. The minimum bend radius for this cable is 0.75 inches, allowing for a single bend without damaging the cable. Our PE3C8327-60 RF cable has a FEP jacket of 0.160-inch diameter. This radio frequency cable assembly can withstand temperatures ranging from -40 to 125 degrees C. The flexible RF cable has a between series connection. This cable assembly has a typical propagation velocity of 76% and a minimum RF shielding of 80 dB. Our right angle 7/16 DIN male to type N male cable has a maximum VSWR of 1.4:1. 7/16 DIN plug to type N plug cable assembly PE3C8327-60 is built with TFT-5G-402 which is a flexible coax type. The Pasternack low passive intermodulation flexible 7/16 DIN cable assembly is manufactured with right angle 7/16 DIN to type N cable connectors, has a 50 Ohm impedance, and is double shielded. Both the connectors have a solder/solder attachment method and a brass body with tri-metal plating. Additional dimensions, specifications and CAD drawings for this low PIM RF cable are available on our downloadable PDF datasheet. PE3C8327-60 can also be used in the other direction and will be a type N male to right angle 7/16 DIN male cable assembly if the opposite connectivity is required. Low PIM 7/16 DIN right angle plug to type N plug cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality 7/16 DIN to type N cable assembly for quick shipment worldwide. Variations of 7/16 DIN and type N cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal 7/16 DIN to type N low PIM RF cable assembly as per your requirements. |
| 0 | ||
| PE3C8327 | Pasternack Enterprises | Key Specifications, Connector 1 Series: 7/16 DIN, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Right Angle, Connector 1 Impedance: 50 Ohm, Connector 2 Series: N, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Tri-Metal, RF Cable Part Number: TFT-5G-402, RF Cable Type: TFT-5G-402, RF Cable Impedance: 50 Ohm. 7/16 DIN Male Right Angle to N Male Low PIM Cable Using TFT-5G-402 Coax Using Times Microwave Components., Radio frequency assembly 7/16 DIN male right angle to N male low PIM cable using TFT-5G-402 coax using Times Microwave components from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack low PIM (Passive Intermodulation, also called Intermod for short) coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, general use, etc. The 7/16 DIN male right angle to N male low PIM cable using TFT-5G-402 coax using Times Microwave components, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom 7/16 DIN to type N cable assembly orders will ship the same business day as well. Pasternack RF coax low PIM cable assembly is built with a right angle 7/16 DIN cable connection on one end and a type N cable connection on the other. Our low PIM right angle 7/16 DIN to type N cable assembly has a male gender on end 1 and a male on end 2. PE3C8327 can also be known as a low PIM right angle 7/16 DIN plug to type N plug cable assembly and will be shipped the same day as it is purchased. This flexible RF cable assembly with a 1.25-inch diameter has copper as the cable's inner conducting material and PTFE dielectric type. 7/16 DIN low PIM cable assemblies from Pasternack are ideal for applications including indoor and outdoor use and plenum rated applications. The minimum bend radius for this cable is 0.75 inches, allowing for a single bend without damaging the cable. Our PE3C8327 RF cable has a FEP jacket of 0.160-inch diameter. This radio frequency cable assembly can withstand temperatures ranging from -40 to 125 degrees C. The flexible RF cable has a between series connection. This cable assembly has a typical propagation velocity of 76% and a minimum RF shielding of 80 dB. Our right angle 7/16 DIN male to type N male cable has a maximum VSWR of 1.4:1. 7/16 DIN plug to type N plug cable assembly PE3C8327 is built with TFT-5G-402 which is a flexible coax type. The Pasternack low passive intermodulation flexible 7/16 DIN cable assembly is manufactured with right angle 7/16 DIN to type N cable connectors, has a 50 Ohm impedance, and is double shielded. Both the connectors have a solder/solder attachment method and a brass body with tri-metal plating. Additional dimensions, specifications and CAD drawings for this low PIM RF cable are available on our downloadable PDF datasheet. PE3C8327 can also be used in the other direction and will be a type N male to right angle 7/16 DIN male cable assembly if the opposite connectivity is required. Low PIM 7/16 DIN right angle plug to type N plug cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality 7/16 DIN to type N cable assembly for quick shipment worldwide. Variations of 7/16 DIN and type N cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal 7/16 DIN to type N low PIM RF cable assembly as per your requirements. | 0 | |||
| PE3C8327-36 | Pasternack Enterprises | Key Specifications, Connector 1 Series: 7/16 DIN, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Right Angle, Connector 1 Impedance: 50 Ohm, Connector 2 Series: N, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Tri-Metal, RF Cable Part Number: TFT-5G-402, RF Cable Type: TFT-5G-402, RF Cable Impedance: 50 Ohm. 7/16 DIN Male Right Angle to N Male Low PIM Cable 36 Inch Length Using TFT-5G-402 Coax Using Times Microwave Components., Radio frequency assembly 7/16 DIN male right angle to N male low PIM cable 36 inch length using TFT-5G-402 coax using Times Microwave components from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack low PIM (Passive Intermodulation, also called Intermod for short) coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, general use, etc. The 7/16 DIN male right angle to N male low PIM cable 36 inch length using TFT-5G-402 coax using Times Microwave components, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom 7/16 DIN to type N cable assembly orders will ship the same business day as well. Pasternack RF coax low PIM cable assembly is built with a right angle 7/16 DIN cable connection on one end and a type N cable connection on the other. Our low PIM right angle 7/16 DIN to type N cable assembly has a male gender on end 1 and a male on end 2. PE3C8327-36 can also be known as a low PIM right angle 7/16 DIN plug to type N plug cable assembly and will be shipped the same day as it is purchased. This flexible RF cable assembly with a 1.25-inch diameter has copper as the cable's inner conducting material and PTFE dielectric type. 7/16 DIN low PIM cable assemblies from Pasternack are ideal for applications including indoor and outdoor use and plenum rated applications. The minimum bend radius for this cable is 0.75 inches, allowing for a single bend without damaging the cable. Our PE3C8327-36 RF cable has a FEP jacket of 0.160-inch diameter. This radio frequency cable assembly can withstand temperatures ranging from -40 to 125 degrees C. The flexible RF cable has a between series connection. This cable assembly has a typical propagation velocity of 76% and a minimum RF shielding of 80 dB. Our right angle 7/16 DIN male to type N male cable has a maximum VSWR of 1.4:1. 7/16 DIN plug to type N plug cable assembly PE3C8327-36 is built with TFT-5G-402 which is a flexible coax type. The Pasternack low passive intermodulation flexible 7/16 DIN cable assembly is manufactured with right angle 7/16 DIN to type N cable connectors, has a 50 Ohm impedance, and is double shielded. Both the connectors have a solder/solder attachment method and a brass body with tri-metal plating. Additional dimensions, specifications and CAD drawings for this low PIM RF cable are available on our downloadable PDF datasheet. PE3C8327-36 can also be used in the other direction and will be a type N male to right angle 7/16 DIN male cable assembly if the opposite connectivity is required. Low PIM 7/16 DIN right angle plug to type N plug cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality 7/16 DIN to type N cable assembly for quick shipment worldwide. Variations of 7/16 DIN and type N cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal 7/16 DIN to type N low PIM RF cable assembly as per your requirements. |
| 0 | ||
| PE3C8327-24 | Pasternack Enterprises | Key Specifications, Connector 1 Series: 7/16 DIN, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Right Angle, Connector 1 Impedance: 50 Ohm, Connector 2 Series: N, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Tri-Metal, RF Cable Part Number: TFT-5G-402, RF Cable Type: TFT-5G-402, RF Cable Impedance: 50 Ohm. 7/16 DIN Male Right Angle to N Male Low PIM Cable 24 Inch Length Using TFT-5G-402 Coax Using Times Microwave Components., Radio frequency assembly 7/16 DIN male right angle to N male low PIM cable 24 inch length using TFT-5G-402 coax using Times Microwave components from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack low PIM (Passive Intermodulation, also called Intermod for short) coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, general use, etc. The 7/16 DIN male right angle to N male low PIM cable 24 inch length using TFT-5G-402 coax using Times Microwave components, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom 7/16 DIN to type N cable assembly orders will ship the same business day as well. Pasternack RF coax low PIM cable assembly is built with a right angle 7/16 DIN cable connection on one end and a type N cable connection on the other. Our low PIM right angle 7/16 DIN to type N cable assembly has a male gender on end 1 and a male on end 2. PE3C8327-24 can also be known as a low PIM right angle 7/16 DIN plug to type N plug cable assembly and will be shipped the same day as it is purchased. This flexible RF cable assembly with a 1.25-inch diameter has copper as the cable's inner conducting material and PTFE dielectric type. 7/16 DIN low PIM cable assemblies from Pasternack are ideal for applications including indoor and outdoor use and plenum rated applications. The minimum bend radius for this cable is 0.75 inches, allowing for a single bend without damaging the cable. Our PE3C8327-24 RF cable has a FEP jacket of 0.160-inch diameter. This radio frequency cable assembly can withstand temperatures ranging from -40 to 125 degrees C. The flexible RF cable has a between series connection. This cable assembly has a typical propagation velocity of 76% and a minimum RF shielding of 80 dB. Our right angle 7/16 DIN male to type N male cable has a maximum VSWR of 1.4:1. 7/16 DIN plug to type N plug cable assembly PE3C8327-24 is built with TFT-5G-402 which is a flexible coax type. The Pasternack low passive intermodulation flexible 7/16 DIN cable assembly is manufactured with right angle 7/16 DIN to type N cable connectors, has a 50 Ohm impedance, and is double shielded. Both the connectors have a solder/solder attachment method and a brass body with tri-metal plating. Additional dimensions, specifications and CAD drawings for this low PIM RF cable are available on our downloadable PDF datasheet. PE3C8327-24 can also be used in the other direction and will be a type N male to right angle 7/16 DIN male cable assembly if the opposite connectivity is required. Low PIM 7/16 DIN right angle plug to type N plug cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality 7/16 DIN to type N cable assembly for quick shipment worldwide. Variations of 7/16 DIN and type N cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal 7/16 DIN to type N low PIM RF cable assembly as per your requirements. |
| 0 | ||
| PE3W18327 | Pasternack Enterprises | Key Specifications, Connector Series 1: SMC, Connector Gender 1: Plug, Connector Polarity 1: Standard, Connector Angle 1: Right Angle, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: SMA, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Right Angle, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: RG178B/U, RF Cable Type: RG178, RF Cable Impedance: 50 Ohm. SMC Plug Right Angle to SMA Male Right Angle Cable Using RG178 Coax. PE3W18327 is a SMC plug right angle to SMA male right angle cable using RG178 coax. This Pasternack SMC plug right angle to SMA male right angle cable assembly uses a 50 Ohm SMC for connector 1 and a 50 Ohm SMA for connector 2. SMC right angle to SMA right angle coaxial cable assembly uses 90 degree right angle coax cable connector. Our plug SMC right angle to male SMA right angle cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE3W18327 SMC plug right angle to SMA male right angle cable assembly is constructed with RG178 coax. | 0 | |||
 TE Connectivity | 178327-5 | TE Connectivity | DYNAMIC D/ROW HDR 16P V ASSY PCB Connector Type: PCB Mount Header PCB Mount Orientation: Vertical Connector System: Wire-to-Board Number of Positions: 16 Number of Rows: 2 PCB Mount Header Vertical Wire-to-Board 16 | Header Assembly: Wire-To-Board & 15A & Gold Or Tin Plated | Part Number: 178327-5 | Internal Number: 178327-5 | TE Connectivity RoHS : Compliant |
| 3,843 | |
| 8-327717-1 | TE Connectivity | PIDG SPD 22-16 COMM 22-18MIL 4 Spade Terminal Type: Spade Tongue Terminal Wire Size: 22 – 16 AWG Wire Size: .326 – 1.31 mm² Wire Size: 509 – 3260 CMA Stud Size: M2.5 #4 Spade Tongue Terminal 22 – 16 AWG .326 – 1.31 mm² 509 – 3260 CMA | Pidg Spade Tongue Terminal | Part Number: 8-327717-1 | Internal Number: 8-327717-1 | TE Connectivity RoHS : Compliant |
| 1,260 | ||
| 8-327043-1 | TE Connectivity | PG SPD 22-16 COMM 22-18 MIL 6 Spade Terminal Type: Spade Tongue Terminal Wire Size: 22 – 16 AWG Wire Size: .26 – 1.65 mm² Wire Size: 509 – 3260 CMA Stud Size: M3.5 #6 Spade Tongue Terminal 22 – 16 AWG .26 – 1.65 mm² 509 – 3260 CMA | Spade Terminal | Part Number: 8-327043-1 | Internal Number: 8-327043-1 | TE Connectivity RoHS : Compliant |
| 1,047 | ||
| 178327-3 | TE Connectivity | DYNAMIC D/ROW HDR 16P V ASSY PdNi PCB Connector Type: PCB Mount Header PCB Mount Orientation: Vertical Connector System: Wire-to-Board Number of Positions: 16 Number of Rows: 2 PCB Mount Header Vertical Wire-to-Board 16 | Header Assembly: Wire-To-Board & 15A & Gold Or Tin Plated | Part Number: 178327-3 | Internal Number: 178327-3 | TE Connectivity RoHS : Compliant |
| 731 | ||
 Vyrian | G83270023 | Diodes Incorporated | Parallel - Fundamental Quartz Crystal, 0.032768MHz Nom | 15,085 | ||
| G83270021 | Diodes Incorporated | Parallel - Fundamental Quartz Crystal, 0.032768MHz Nom | 14,935 | |||
| 1832798 | Phoenix Contact | Modular Terminal Block, 8A, 1.5mm2, 1 Row(s), 1 Deck(s) RoHS : Compliant | 10,767 | |||
| AD8327ARUZ-REEL | Analog Devices Inc | Line Driver, 1 Func, 1 Driver, PDSO20 RoHS : Compliant | 10,005 | |||
| 1832785 | Phoenix Contact | Modular Terminal Block, 8A, 1.5mm2, 1 Row(s), 1 Deck(s) RoHS : Compliant | 8,360 | |||
ADS8327IBPWRG4 | Texas Instruments | ADC, Successive Approximation, 16-Bit, 1 Func, 1 Channel, Serial Access, CMOS, PDSO16 RoHS : Compliant | 7,216 | |||
| HMC8327LG | Analog Devices Inc | Down Converter RoHS : Compliant | 6,942 | |||
| ADS8327IBPWG4 | Texas Instruments | ADC, Successive Approximation, 16-Bit, 1 Func, 1 Channel, Serial Access, CMOS, PDSO16 RoHS : Compliant | 6,522 | |||
| ADS8327IBRSARG4 | Texas Instruments | ADC, Successive Approximation, 16-Bit, 1 Func, 1 Channel, Serial Access, CMOS, PQCC16 RoHS : Compliant | 6,197 | |||
| 2832713 | Phoenix Contact | Switches/Accessories | 5,370 | |||
| 1783274 | Phoenix Contact | Barrier Strip Terminal Block, 12A, 2.5mm2, 1 Row(s), 1 Deck(s) RoHS : Compliant | 5,049 | |||
| 583274-3 | TE Connectivity | Connector Accessory RoHS : Compliant | 3,875 | |||
| ADS8327IPWRG4 | Texas Instruments | ADC, Successive Approximation, 16-Bit, 1 Func, 1 Channel, Serial Access, CMOS, PDSO16 RoHS : Compliant | 3,270 | |||
| ASAKMPD8-32.768KHZT3 | Abracon Corporation | CMOS Output Clock Oscillator, 0.032768MHz Nom RoHS : Compliant | 835 | |||
| 1832742 | Phoenix Contact | Barrier Strip Terminal Block RoHS : Compliant | 703 | |||
 Win Source Electronics | FDMC8327L | Fairchild Semiconductor Corporation | MOSFET N-CH 40V 12A 8MLP RoHS : Compliant |
| 25,260 | |
| ADS8327IPW | Texas Instruments | IC ADC 16BIT 500KSPS 16-TSSOP RoHS : Compliant |
| 888 | ||
| ADS8327IPWR | Texas Instruments | IC ADC 16BIT 500KSPS 16-TSSOP RoHS : Compliant |
| 810 |
| Does ALLDATASHEET help your business so far? [ DONATE ] |
About Alldatasheet | Advertisement | Contact us | Privacy Policy | Link to Datasheet | Link Exchange | Manufacturer List All Rights Reserved짤Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |
British ▼ 
English
Chinese
German
Japanese
Russian
Korean
Spanish
French
Italian
Portuguese
Polish
Vietnamese
Indian
Mexican
New Zealand