9080S18-R Price, Distributor, Stock

The simplicity of a quarter turn is all it takes to secure panels quickly and easily with these versatile little fasteners. Numerous head styles stud lengths receptacle styles and accessories provide flexibility for accommodating many specific mountin

1609-080-SS-20

RAF Electronic Hardware

049080011407

Essentra Components

82-19-080-20

Southco

RT-310-190-80

Essentra Components

E3-129-080

Southco

The smooth operation of theVISE ACTION� design aligns the pawl behind the frame and draws it up tight with a single continuous half-turn motion. Its compression action provides consistent 6.4 mm (.25) pull-up for environmental sealing in gasketed applic

1609-080-N

RAF Electronic Hardware

EBV Elektronik

LD29080DT18R

STMicroelectronics

LDO Regulator Pos 18V 08A 3Pin2Tab DPAK TR (Alt: LD29080DT18R)
RoHS : Compliant

2,500

QN9080DHNE

NXP Semiconductors

Bluetooth SoC Bluetooth 50 48 Pins HVQFN (Alt: QN9080DHNE)
RoHS : Compliant

QN9080CHNY

NXP Semiconductors

Ultra Low Power Bluetooth 5 SystemOnChip 162V to 36V 2Mbps 48Pin HVQFN TR (Alt: QN9080CHNY)
RoHS : Compliant

PC339080AE

NXP Semiconductors

Analog Linear ICs SD non Std MPP Part 2 (Alt: PC339080AE)
RoHS : Compliant

QN9080DHNY

NXP Semiconductors

BTLE SOC (Alt: QN9080DHNY)
RoHS : Compliant

VNQ9080AJTR

STMicroelectronics

MOSFET Driver 136A 4Output High Side NonInverting 16Pin PowerSSO TR (Alt: VNQ9080AJTR)
RoHS : Compliant

LD39080PT-R

STMicroelectronics

(Alt: LD39080PT-R)
RoHS : Compliant

LD29080DT33R

STMicroelectronics

LDO Regulator Pos 33V 08A 3Pin2Tab DPAK TR (Alt: LD29080DT33R)
RoHS : Compliant

LD29080DT50R

STMicroelectronics

Fixed LDO Voltage Regulator up to 13V 400mV drop 5V800mA out TO2523 (Alt: LD29080DT50R)
RoHS : Compliant

LD29080DT25R

STMicroelectronics

LDO Regulator Pos 25V 08A 3Pin2Tab DPAK TR (Alt: LD29080DT25R)
RoHS : Compliant

Flip Electronics

QN9080DHNE

NXP Semiconductors

Stock, Ship Today
RoHS : Compliant

5,498

QN9080CHNY

NXP Semiconductors

Stock
RoHS : Compliant

5,498

QN9080DHNY

NXP Semiconductors

Stock, Ship Today
RoHS : Compliant

3,041

QN9080-001-M17Y

NXP Semiconductors

Stock, Ship Today
RoHS : Compliant

915

QN9080-001-M17Z

NXP Semiconductors

Stock, Ship Today
RoHS : Compliant

345

Master Electronics

RL9080-101-F1RE

Amphenol Technical Products International

8.0MM RADLOK FEED-THRU RA
RoHS : Compliant

1,000 : $5.97
500 : $6.49
250 : $6.7
100 : $9.06
50 : $9.34
26 : $9.61
2 : $10.64

FW-02-03-LM-D-169-080

Samtec Inc

RoHS : Compliant

10,000 : $0.4533
7,500 : $0.5467
5,000 : $0.5616
2,500 : $0.6575
1,000 : $0.7286
500 : $0.9403
250 : $0.9844
25 : $1.2115

FW-02-03-S-D-259-080

Samtec Inc

RoHS : Compliant

10,000 : $0.572
7,500 : $0.573
5,000 : $0.589
2,500 : $0.726
1,000 : $0.814
500 : $1.104
250 : $1.156
25 : $1.423

77-3734-3729-40908-0200

Franz Binder GmbH & Co

M12-A Connecting cable for food and beverage industry Contacts: 8 unshielded moulded on the cable IP69K Ecolab FDA compliant Special TPE grey 8 x 0.25mm² stainless steel 2 m
RoHS : Compliant

250 : $34.71
100 : $35.17
50 : $36.14
25 : $38.23
10 : $39.37
5 : $40.58
1 : $45.48

719-0802-000

C&K Switches

C&K Series-DIGITAST Key Switch SRKL BU
RoHS : Compliant

2,000 : $0.4478
1,500 : $0.457
1,000 : $0.4896
1 : $0.5386

PPFP190803BK1

Hammond Manufacturing

rack - fan panel
RoHS : Compliant

250 : $26.67
100 : $27.4
50 : $28.57
25 : $29.85
10 : $30.77
5 : $32.26
1 : $34.48

FW-18-03-F-D-169-080

Samtec Inc

RoHS : Compliant

5,000 : $1.62
2,500 : $2.25
1,000 : $2.9
500 : $3.14
250 : $4.28
100 : $4.4
50 : $4.61
5 : $5.67

FW-02-03-F-D-269-080

Samtec Inc

RoHS : Compliant

7,500 : $0.4236
5,000 : $0.4247
2,500 : $0.5571
1,000 : $0.6269
500 : $0.806
250 : $0.8438
25 : $1.0385

FW-02-03-G-D-109-080

Samtec Inc

RoHS : Compliant

7,500 : $0.533
5,000 : $0.548
2,500 : $0.685
1,000 : $0.771
500 : $1.045
250 : $1.094
25 : $1.346

FW-02-03-H-D-199-080

Samtec Inc

RoHS : Compliant

7,500 : $0.883
5,000 : $0.907
2,500 : $1.151
1,000 : $1.3
500 : $1.71
250 : $1.761
100 : $1.844
25 : $2.269

FW-02-03-L-D-139-080

Samtec Inc

RoHS : Compliant

10,000 : $0.4788
7,500 : $0.48
5,000 : $0.4931
2,500 : $0.6164
1,000 : $0.7313
500 : $0.9403
250 : $0.9844
25 : $1.2115

MW-25-03-G-D-219-080-A-P-T

Samtec Inc

RoHS : Compliant

1,000 : $5.43
500 : $6.87
250 : $7.67
100 : $8.12
50 : $10.96
25 : $11.47
5 : $12.66

121659-0804

ITT Interconnect Solutions

KPTC0F14-12S-C; MIL-DTL 26482 Series I & Mil Batte
RoHS : Compliant

500 : $42.99
375 : $43.87
250 : $64.45
125 : $126.18

132039-0806

ITT Interconnect Solutions

Circular Plastic Push Pull Straight Plug w/Cable Gray 5 Pin 7 A PLA Series | ITT Cannon PLA1G022H05
RoHS : Compliant

200 : $16.96
150 : $17.3
100 : $24.59
50 : $46.44

2-1002908-0-M

TE Connectivity

DT1-052K W/TH LEADS/RIVET MOQ Reduction
RoHS : Compliant

200 : $9.69
150 : $9.89
100 : $12.5
50 : $20.31

Pasternack Enterprises US

PE9080

Pasternack Enterprises

Key Specifications, Connector Series 1: SMA, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Impedance 1: 50 Ohm, Connector Series 2: N, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Impedance 2: 50 Ohm, Frequency, Min: DC, Frequency, Max: 11 GHz, Adapter Body Style: Straight, Connector Mount Method 1: None, Connector Body Material 1: Brass, Connector Body Plating 1: Nickel, Connector Mount Method 2: None, Connector Body Material 2: Brass, Connector Body Plating 2: Nickel. SMA Male to N Male Adapter. SMA adapter PE9080 is one of over 40,000 available RF, microwave and millimeter wave components from Pasternack. Our SMA to type N adapter is a between series coaxial adapter design. This 50 Ohm SMA adapter is precision manufactured to RF components industry specifications and has a maximum frequency of 11 GHz. SMA male to type N male adapter is one of the many RF components that ship same day as they are ordered. PE9080 male SMA to male N type adapter has a straight body. This Pasternack straight SMA coax adapter is a in-line RF adapter. Our male SMA to male type N adapter PE9080 is shipped from our facility certified to ISO 9001:2015 the same day as purchased. This SMA to N type radio frequency adapter is part of over 40,000 RF, microwave and millimeter wave products that ship the same day worldwide, including custom cable assemblies.
RoHS : Compliant

1 : $51.99
25 : $49.39
50 : $46.79
100 : $44.71

430

PE39080/HS

Pasternack Enterprises

Key Specifications, Connector 1 Series: SMA, Connector 1 Gender: Plug, Connector 1 Polarity: Reverse Polarity, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: SMA, Connector 2 Gender: Jack, Connector 2 Polarity: Reverse Polarity, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: RG316-DS, RF Cable Type: RG316-DS, RF Cable Impedance: 50 Ohm. Reverse Polarity SMA Plug to Reverse Polarity SMA Jack Cable Using RG316-DS Coax with HeatShrink., Radio frequency assembly reverse polarity SMA plug to reverse polarity SMA jack cable using RG316-DS coax with heatshrink from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. The Reverse polarity SMA plug to reverse polarity SMA jack cable using RG316-DS coax with heatshrink, SMA cable like our other Pasternack coaxial cable assemblies, will ship the same day and any custom SMA to SMA cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with reverse polarity SMA cable connection on one end and reverse polarity SMA cable connection on the other. Our reverse polarity SMA to reverse polarity SMA cable assemblies have a plug gender on end 1 and jack on end 2. PE39080/HS can also be known as a reverse polarity SMA male to reverse polarity SMA female cable assembly and will be shipped same-day as it is purchased. Reverse polarity SMA male to reverse polarity SMA female cable assembly PE39080/HS is built with RG316-DS which is a flexible coax type. The Pasternack flexible reverse polarity SMA cable assembly is manufactured with SMA to SMA cable connectors, has a 50 Ohm impedance and is double shielded. RF specs on this reverse polarity SMA plug to reverse polarity SMA jack cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE39080/HS can also be used in the other direction and will be reverse polarity SMA jack to reverse polarity SMA plug cable assembly if the opposite connectivity is required. SMA reverse polarity male to SMA reverse polarity female cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality SMA to SMA cable assembly for quick shipment worldwide. Variations of SMA cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this reverse polarity SMA plug to reverse polarity SMA jack cable using RG316-DS coax with heatshrink.

PE39080/HS-12

Pasternack Enterprises

Key Specifications, Connector 1 Series: SMA, Connector 1 Gender: Plug, Connector 1 Polarity: Reverse Polarity, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: SMA, Connector 2 Gender: Jack, Connector 2 Polarity: Reverse Polarity, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: RG316-DS, RF Cable Type: RG316-DS, RF Cable Impedance: 50 Ohm, Length, Max: 12 inches. Reverse Polarity SMA Plug to Reverse Polarity SMA Jack Cable 12 Inch Length Using RG316-DS Coax with HeatShrink., Radio frequency assembly reverse polarity SMA plug to reverse polarity SMA jack cable 12 inch length using RG316-DS coax with heatshrink from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. The Reverse polarity SMA plug to reverse polarity SMA jack cable 12 inch length using RG316-DS coax with heatshrink, SMA cable like our other Pasternack coaxial cable assemblies, will ship the same day and any custom SMA to SMA cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with reverse polarity SMA cable connection on one end and reverse polarity SMA cable connection on the other. Our reverse polarity SMA to reverse polarity SMA cable assemblies have a plug gender on end 1 and jack on end 2. PE39080/HS-12 can also be known as a reverse polarity SMA male to reverse polarity SMA female cable assembly and will be shipped same-day as it is purchased. Reverse polarity SMA male to reverse polarity SMA female cable assembly PE39080/HS-12 is built with RG316-DS which is a flexible coax type. The Pasternack flexible reverse polarity SMA cable assembly is manufactured with SMA to SMA cable connectors, has a 50 Ohm impedance and is double shielded. RF specs on this reverse polarity SMA plug to reverse polarity SMA jack cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE39080/HS-12 can also be used in the other direction and will be reverse polarity SMA jack to reverse polarity SMA plug cable assembly if the opposite connectivity is required. SMA reverse polarity male to SMA reverse polarity female cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality SMA to SMA cable assembly for quick shipment worldwide. Variations of SMA cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this reverse polarity SMA plug to reverse polarity SMA jack cable 12 inch length using RG316-DS coax with heatshrink.

1 : $155.99
25 : $148.19
50 : $140.39
100 : $134.15

PE39080/HS-24

Pasternack Enterprises

Key Specifications, Connector 1 Series: SMA, Connector 1 Gender: Plug, Connector 1 Polarity: Reverse Polarity, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: SMA, Connector 2 Gender: Jack, Connector 2 Polarity: Reverse Polarity, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: RG316-DS, RF Cable Type: RG316-DS, RF Cable Impedance: 50 Ohm, Length, Max: 24 inches. Reverse Polarity SMA Plug to Reverse Polarity SMA Jack Cable 24 Inch Length Using RG316-DS Coax with HeatShrink., Radio frequency assembly reverse polarity SMA plug to reverse polarity SMA jack cable 24 inch length using RG316-DS coax with heatshrink from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. The Reverse polarity SMA plug to reverse polarity SMA jack cable 24 inch length using RG316-DS coax with heatshrink, SMA cable like our other Pasternack coaxial cable assemblies, will ship the same day and any custom SMA to SMA cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with reverse polarity SMA cable connection on one end and reverse polarity SMA cable connection on the other. Our reverse polarity SMA to reverse polarity SMA cable assemblies have a plug gender on end 1 and jack on end 2. PE39080/HS-24 can also be known as a reverse polarity SMA male to reverse polarity SMA female cable assembly and will be shipped same-day as it is purchased. Reverse polarity SMA male to reverse polarity SMA female cable assembly PE39080/HS-24 is built with RG316-DS which is a flexible coax type. The Pasternack flexible reverse polarity SMA cable assembly is manufactured with SMA to SMA cable connectors, has a 50 Ohm impedance and is double shielded. RF specs on this reverse polarity SMA plug to reverse polarity SMA jack cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE39080/HS-24 can also be used in the other direction and will be reverse polarity SMA jack to reverse polarity SMA plug cable assembly if the opposite connectivity is required. SMA reverse polarity male to SMA reverse polarity female cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality SMA to SMA cable assembly for quick shipment worldwide. Variations of SMA cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this reverse polarity SMA plug to reverse polarity SMA jack cable 24 inch length using RG316-DS coax with heatshrink.

1 : $165.99
25 : $157.69
50 : $149.39
100 : $142.75

PE39080/HS-36

Pasternack Enterprises

Key Specifications, Connector 1 Series: SMA, Connector 1 Gender: Plug, Connector 1 Polarity: Reverse Polarity, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: SMA, Connector 2 Gender: Jack, Connector 2 Polarity: Reverse Polarity, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: RG316-DS, RF Cable Type: RG316-DS, RF Cable Impedance: 50 Ohm, Length, Max: 36 inches. Reverse Polarity SMA Plug to Reverse Polarity SMA Jack Cable 36 Inch Length Using RG316-DS Coax with HeatShrink., Radio frequency assembly reverse polarity SMA plug to reverse polarity SMA jack cable 36 inch length using RG316-DS coax with heatshrink from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. The Reverse polarity SMA plug to reverse polarity SMA jack cable 36 inch length using RG316-DS coax with heatshrink, SMA cable like our other Pasternack coaxial cable assemblies, will ship the same day and any custom SMA to SMA cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with reverse polarity SMA cable connection on one end and reverse polarity SMA cable connection on the other. Our reverse polarity SMA to reverse polarity SMA cable assemblies have a plug gender on end 1 and jack on end 2. PE39080/HS-36 can also be known as a reverse polarity SMA male to reverse polarity SMA female cable assembly and will be shipped same-day as it is purchased. Reverse polarity SMA male to reverse polarity SMA female cable assembly PE39080/HS-36 is built with RG316-DS which is a flexible coax type. The Pasternack flexible reverse polarity SMA cable assembly is manufactured with SMA to SMA cable connectors, has a 50 Ohm impedance and is double shielded. RF specs on this reverse polarity SMA plug to reverse polarity SMA jack cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE39080/HS-36 can also be used in the other direction and will be reverse polarity SMA jack to reverse polarity SMA plug cable assembly if the opposite connectivity is required. SMA reverse polarity male to SMA reverse polarity female cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality SMA to SMA cable assembly for quick shipment worldwide. Variations of SMA cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this reverse polarity SMA plug to reverse polarity SMA jack cable 36 inch length using RG316-DS coax with heatshrink.

1 : $163.99
25 : $155.79
50 : $147.59
100 : $141.03

PE39080/HS-48

Pasternack Enterprises

Key Specifications, Connector 1 Series: SMA, Connector 1 Gender: Plug, Connector 1 Polarity: Reverse Polarity, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: SMA, Connector 2 Gender: Jack, Connector 2 Polarity: Reverse Polarity, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: RG316-DS, RF Cable Type: RG316-DS, RF Cable Impedance: 50 Ohm, Length, Max: 48 inches. Reverse Polarity SMA Plug to Reverse Polarity SMA Jack Cable 48 Inch Length Using RG316-DS Coax with HeatShrink., Radio frequency assembly reverse polarity SMA plug to reverse polarity SMA jack cable 48 inch length using RG316-DS coax with heatshrink from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. The Reverse polarity SMA plug to reverse polarity SMA jack cable 48 inch length using RG316-DS coax with heatshrink, SMA cable like our other Pasternack coaxial cable assemblies, will ship the same day and any custom SMA to SMA cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with reverse polarity SMA cable connection on one end and reverse polarity SMA cable connection on the other. Our reverse polarity SMA to reverse polarity SMA cable assemblies have a plug gender on end 1 and jack on end 2. PE39080/HS-48 can also be known as a reverse polarity SMA male to reverse polarity SMA female cable assembly and will be shipped same-day as it is purchased. Reverse polarity SMA male to reverse polarity SMA female cable assembly PE39080/HS-48 is built with RG316-DS which is a flexible coax type. The Pasternack flexible reverse polarity SMA cable assembly is manufactured with SMA to SMA cable connectors, has a 50 Ohm impedance and is double shielded. RF specs on this reverse polarity SMA plug to reverse polarity SMA jack cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE39080/HS-48 can also be used in the other direction and will be reverse polarity SMA jack to reverse polarity SMA plug cable assembly if the opposite connectivity is required. SMA reverse polarity male to SMA reverse polarity female cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality SMA to SMA cable assembly for quick shipment worldwide. Variations of SMA cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this reverse polarity SMA plug to reverse polarity SMA jack cable 48 inch length using RG316-DS coax with heatshrink.

1 : $171.99
25 : $163.39
50 : $154.79
100 : $147.91

PE39080/HS-6

Pasternack Enterprises

Key Specifications, Connector 1 Series: SMA, Connector 1 Gender: Plug, Connector 1 Polarity: Reverse Polarity, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: SMA, Connector 2 Gender: Jack, Connector 2 Polarity: Reverse Polarity, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: RG316-DS, RF Cable Type: RG316-DS, RF Cable Impedance: 50 Ohm, Length, Max: 6 inches. Reverse Polarity SMA Plug to Reverse Polarity SMA Jack Cable 6 Inch Length Using RG316-DS Coax with HeatShrink., Radio frequency assembly reverse polarity SMA plug to reverse polarity SMA jack cable 6 inch length using RG316-DS coax with heatshrink from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. The Reverse polarity SMA plug to reverse polarity SMA jack cable 6 inch length using RG316-DS coax with heatshrink, SMA cable like our other Pasternack coaxial cable assemblies, will ship the same day and any custom SMA to SMA cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with reverse polarity SMA cable connection on one end and reverse polarity SMA cable connection on the other. Our reverse polarity SMA to reverse polarity SMA cable assemblies have a plug gender on end 1 and jack on end 2. PE39080/HS-6 can also be known as a reverse polarity SMA male to reverse polarity SMA female cable assembly and will be shipped same-day as it is purchased. Reverse polarity SMA male to reverse polarity SMA female cable assembly PE39080/HS-6 is built with RG316-DS which is a flexible coax type. The Pasternack flexible reverse polarity SMA cable assembly is manufactured with SMA to SMA cable connectors, has a 50 Ohm impedance and is double shielded. RF specs on this reverse polarity SMA plug to reverse polarity SMA jack cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE39080/HS-6 can also be used in the other direction and will be reverse polarity SMA jack to reverse polarity SMA plug cable assembly if the opposite connectivity is required. SMA reverse polarity male to SMA reverse polarity female cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality SMA to SMA cable assembly for quick shipment worldwide. Variations of SMA cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this reverse polarity SMA plug to reverse polarity SMA jack cable 6 inch length using RG316-DS coax with heatshrink.

1 : $145.99
25 : $138.69
50 : $131.39
100 : $125.55

PE39080

Pasternack Enterprises

PE3W19080/HS

Pasternack Enterprises

Key Specifications, Connector Series 1: 10-32, Connector Gender 1: Female, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: FAKRA, Connector Gender 2: Jack, Connector Polarity 2: Standard, Connector Angle 2: Right Angle, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: RG316/U, RF Cable Type: RG316, RF Cable Impedance: 50 Ohm. 10-32 Female to Black FAKRA Jack Right Angle Cable Using RG316 Coax with HeatShrink. PE3W19080/HS is a 10-32 female to FAKRA jack right angle cable using RG316 coax. This Pasternack 10-32 female to FAKRA jack right angle cable assembly uses a 50 Ohm 10-32 for connector 1 and a 50 Ohm FAKRA for connector 2. 10-32 to FAKRA right angle coaxial cable assembly uses 90 degree right angle coax cable connector. Our female 10-32 to jack FAKRA right angle cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE3W19080/HS 10-32 female to FAKRA jack right angle cable assembly is constructed with RG316 coax.

PE3W09080

Pasternack Enterprises

Key Specifications, Connector Series 1: BNC, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: SMA, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: RG142B/U, RF Cable Type: RG142, RF Cable Impedance: 50 Ohm. BNC Male to SMA Male Cable Using RG142 Coax. PE3W09080 is a BNC male to SMA male cable using RG142 coax. This Pasternack BNC male to SMA male cable assembly uses a 50 Ohm BNC for connector 1 and a 50 Ohm SMA for connector 2. Our male BNC to male SMA cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE3W09080 BNC male to SMA male cable assembly is constructed with RG142 coax.

PE3C9080

Pasternack Enterprises

Key Specifications, Connector Series 1: N, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Right Angle, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: N, Connector Gender 2: Female, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: PE-SR401AL-STRAIGHT. N Male Right Angle to N Female Cable Using PE-SR401AL Coax. PE3C9080 is a N male right angle to N female cable using coax. This Pasternack N male right angle to N female cable assembly uses a 50 Ohm N for connector 1 and a 50 Ohm N for connector 2. N right angle to N coaxial cable assembly uses 90 degree right angle coax cable connector. Our male N right angle to female N cable assembly uses a cable type that is. Pasternack PE3C9080 N male right angle to N female cable assembly is constructed with coax.

Sager

9080

Keystone Electronics Corp

Standoffs & Spacers SPACER SUPPORT

500 : $1.13
1,000 : $0.6758
2,500 : $0.5936

8908016843

Qnity Laird

EMI Gaskets, Sheets, Absorbers & Shielding EGW,AL

9713908066

Qnity Laird