| Distributor | Part # | Manufacturer | Description | Price | Qty.
BuyNow |
Master Electronics | EC0051-000
| TE Connectivity | Push on Wire Marker Legend: B 1.5 to 2.0mm Dia Wire White
RoHS : Compliant | 250,000 : $0.0133
150,000 : $0.0135
100,000 : $0.0137
50,000 : $0.014
25,000 : $0.0143
10,000 : $0.0147
3,000 : $0.0152
1 : $0.0167
|
| 4,027
 |
Avnet Americas | TFCC-005-100
| Omega Engineering | Thermocouple Wire, Insulated, Type E/T, 36 AWG, Solid, 100 ft, ANSI, PFA, TF Series - Cable Rools/Shrink Tubing (Alt: TFCC-005-100)
RoHS : Compliant | | 0
 |
HDC00516
| Omega Engineering | HI-DENSITY CARTRIDGE HEATERS WITH 321 STAINLESS STEEL SHEATH 1/2 (12.7 MM) NOMINAL DIAMETER - Bulk (Alt: HDC00516)
RoHS : Compliant | | 0
|
HDC00512
| Omega Engineering | HI-DENSITY CARTRIDGE HEATERS WITH 321 STAINLESS STEEL SHEATH 1/2 (12.7 MM) NOMINAL DIAMETER - Bulk (Alt: HDC00512)
RoHS : Compliant | | 0
|
IEC-TFCC-005-15M
| Omega Engineering | Thermocouple Wire, Insulated, Type E/T, 36 AWG, Solid, 15 m, PFA, IEC, TF Series - Cable Rools/Shrink Tubing (Alt: IEC-TFCC-005-15M)
RoHS : Compliant | | 0
|
HDC00515
| Omega Engineering | HI-DENSITY CARTRIDGE HEATERS WITH 321 STAINLESS STEEL SHEATH 1/2 (12.7 MM) NOMINAL DIAMETER - Bulk (Alt: HDC00515)
RoHS : Compliant | | 0
|
HDC00510
| Omega Engineering | HI-DENSITY CARTRIDGE HEATERS WITH 321 STAINLESS STEEL SHEATH 1/2 (12.7 MM) NOMINAL DIAMETER - Bulk (Alt: HDC00510)
RoHS : Compliant | | 0
|
SPCC-005-100
| Omega Engineering | Thermocouple Wire, Uninsulated, Type E/T, 36 AWG, 100 ft, SPCC Series - Cable Rools/Shrink Tubing (Alt: SPCC-005-100)
RoHS : Compliant | | 0
|
C09131C0051002U
| Amphenol Corporation | Connector M16 Circular PIN 5 Position Solder Straight Panel Mount 5 Terminal 1 Port - Boxed Product (Development Kits) (Alt: C09131C0051002U)
RoHS : Compliant | 2,000 : $5.86176
1,000 : $5.89229
500 : $6.23393
200 : $6.63625
100 : $7.42948
|
| 0
|
TFCC-005-1000
| Omega Engineering | Thermocouple Wire, Insulated, Type E/T, 36 AWG, Solid, 1000 ft, ANSI, PFA, TF Series - Cable Rools/Shrink Tubing (Alt: TFCC-005-1000)
RoHS : Compliant | | 0
|
HDC00511
| Omega Engineering | HI-DENSITY CARTRIDGE HEATERS WITH 321 STAINLESS STEEL SHEATH 1/2 (12.7 MM) NOMINAL DIAMETER - Bulk (Alt: HDC00511)
RoHS : Compliant | | 0
|
SPCC-005-1000
| Omega Engineering | Thermocouple Wire, Uninsulated, Type E/T, 36 AWG, 1000 ft, SPCC Series - Cable Rools/Shrink Tubing (Alt: SPCC-005-1000)
RoHS : Compliant | | 0
|
HDC00514
| Omega Engineering | HI-DENSITY CARTRIDGE HEATERS WITH 321 STAINLESS STEEL SHEATH 1/2 (12.7 MM) NOMINAL DIAMETER - Bulk (Alt: HDC00514)
RoHS : Compliant | | 0
|
C01620C0051002
| Amphenol Corporation | Connector Circular PIN 5+PE Position Screw Straight Flange Mount 6 Terminal 1 Port - Boxed Product (Development Kits) (Alt: C01620C0051002)
RoHS : Compliant | 2,000 : $18.99628
1,000 : $19.39279
500 : $19.70437
200 : $22.43807
100 : $25.24
|
| 0
|
TMC00510K00FE02
| Vishay Intertechnologies | TMC005 10K 1% E02 E4 - Bulk (Alt: TMC00510K00FE02)
RoHS : Compliant | 250 : $13.9001
100 : $15.96075
1 : $23.94444
|
| 0
|
TMC00510R00FE02
| Vishay Intertechnologies | TMC005 10 1% E02 E4 - Bulk (Alt: TMC00510R00FE02)
RoHS : Compliant | 250 : $7.1788
100 : $8.0203
1 : $24.5763
|
| 0
|
Newark | FMC00512-48
| Fairview Microwave Inc | Rf - Coaxial Cable Assemblies; |Fairview Microwave FMC00512-48
RoHS : Not Compliant | | 707
|
FMC00519-48
| Fairview Microwave Inc | Rf - Coaxial Cable Assemblies; |Fairview Microwave FMC00519-48
RoHS : Not Compliant | | 317
|
FMC00519-12
| Fairview Microwave Inc | Low Loss Sma Female-Sma Female Cbl Coax; |Fairview Microwave FMC00519-12
RoHS : Not Compliant | | 317
|
FMC00513-24
| Fairview Microwave Inc | Rf/Coaxial Cbl Assy, 24", 610Mm, Rg316; |Fairview Microwave FMC00513-24
RoHS : Not Compliant | | 154
|
FMC00513-50CM
| Fairview Microwave Inc | Rf/Coaxial Cbl Assy, 19.7", 500Mm, Rg316; |Fairview Microwave FMC00513-50CM
RoHS : Not Compliant | | 154
|
FMC00513-150CM
| Fairview Microwave Inc | Rf/Coaxial Cbl Assy, 4.9 Ft, 1.5M, Rg316; |Fairview Microwave FMC00513-150CM
RoHS : Not Compliant | | 154
|
FMC00513-100CM
| Fairview Microwave Inc | Rf/Coaxial Cbl Assy, 3.3 Ft, 1M, Rg316; |Fairview Microwave FMC00513-100CM
RoHS : Not Compliant | | 154
|
FMC00516-24
| Fairview Microwave Inc | Rf/Coaxial Cbl Assy, 24", 610Mm, Rg58C/U; |Fairview Microwave FMC00516-24
RoHS : Not Compliant | | 34
|
FMC00516-200CM
| Fairview Microwave Inc | Rf/Coaxial Cbl Assy, 6.6 Ft, 2M, Rg58C/U; |Fairview Microwave FMC00516-200CM
RoHS : Not Compliant | | 34
|
FMC00516-150CM
| Fairview Microwave Inc | Rf/Coaxial Cbl Assy, 4.9 Ft, 1.5M; |Fairview Microwave FMC00516-150CM
RoHS : Not Compliant | | 34
|
FMC00518-60
| Fairview Microwave Inc | Rf - Coaxial Cable Assemblies; |Fairview Microwave FMC00518-60
RoHS : Not Compliant | | 8
|
FMC00518-24
| Fairview Microwave Inc | Low Loss 10-32 Male-Bnc Female Cbl Coax; |Fairview Microwave FMC00518-24
RoHS : Not Compliant | | 8
|
FMC00518-50CM
| Fairview Microwave Inc | Rf - Coaxial Cable Assemblies; |Fairview Microwave FMC00518-50CM
RoHS : Not Compliant | | 8
|
FMC00518-150CM
| Fairview Microwave Inc | Rf - Coaxial Cable Assemblies; |Fairview Microwave FMC00518-150CM
RoHS : Not Compliant | | 8
|
FMC00518-48
| Fairview Microwave Inc | Rf - Coaxial Cable Assemblies; |Fairview Microwave FMC00518-48
RoHS : Not Compliant | | 7
|
RS | TFCC-005-100
| Omega Engineering | T/C WIRE, MEDIUM TEMP WIRE | | 2
|
TDC005-1
| L-com Inc | Flat Modular CableRJ45 (8x8) / Tinned End1.0 ft- | 1 : $12.49
10 : $12.11
25 : $11.74
|
| 0
|
TDC005-14
| L-com Inc | Flat Modular CableRJ45 (8x8) / Tinned End14.0 ft- | | 0
|
SY3C00-51
| SMC Corporation of America | SOLENOID VALVE, AIR, 3-POSITION PRESSURE CENTER, PILOT, 24 VDC, SY3000 SERIES | | 0
|
SY5C00-51-NA
| SMC Corporation of America | VALVE, 5 PORT SOLENOID, SY-1 SERIES | | 0
|
SY7C00-51-NA
| SMC Corporation of America | VALVE, 5 PORT SOLENOID, SY-1 SERIES | | 0
|
SY3C00-51-NA
| SMC Corporation of America | VALVE, 5 PORT, SOLENOID, SY-1 SERIES | | 0
|
LCE02C005120A
| Siemens | CONTACTOR, LTG, EH, N12,30A,0NC,5NO,120V ; LCE02C005120A | | 0
|
LCE01C005120A
| Siemens | CONTACTOR, LTG, EH, N1,30A,0NC,5NO,120V ; LCE01C005120A | | 0
|
LCE00C005120A
| Siemens | CONTACTOR, LTG, EH, OPEN,30A,0NC,5NO,120V ; LCE00C005120A | | 0
|
TFCC-005-1000
| Omega Engineering | T/C WIRE, MEDIUM TEMP WIRE | | 0
|
LCE04C005120A
| Siemens | CONTACTOR, LTG, EH, N4X,30A,0NC,5NO,120V ; LCE04C005120A | | 0
|
E2 AC-DTBC0051
| Pizzato Elettrica Srl | COMPLETE UNIT WITH EMERGENCY PUSHBUTTON, FIXING ADAPTER AND CONTACTS | 1 : $56.56
5 : $53.74
10 : $52.03
|
| 0
|
C016 20C005 100 2
| Amphenol Tuchel | CIRCULAR CONNECTOR,5+1 POSITION PLASTIC FRONT MOUNT RECEPTICAL, CRIMP PIN, IP65 | 100 : $34.76
500 : $31.98
1,000 : $27.8
|
| 0
|
DFS60E-TGEC00512 (1037025)
| SICK AG | INCREMENTAL ENCODER, 512 PPR, 14 MM DIA. METAL SHAFT, 10-32 V, CONNECTOR | | 0
|
Rochester Electronics | RJ80535LC0051M
| Intel Corporation | Microprocessor, Pentium, x86 Arch., 64-Bit, 1100MHz, CMOS, PBGA479
RoHS : Not Compliant | 1,000 : $170.95
500 : $176.78
100 : $182.6
25 : $188.43
1 : $194.26
|
| 1,882
|
Sager | R200C0-051-D0760
| NMB Technologies Corporation | 200 MM DC AXIAL FAN - 48 | 1 : $241.57
2 : $230.25
5 : $219.94
10 : $210.51
20 : $201.86
50 : $193.9
|
| 0
|
ENC0051D
| Qnity Laird | Laird Technologies | | 0
|
TME | C01620C0051002
| Amphenol Corporation | Connector: circular; socket; PIN: 6; male; industrial; C16-3; 400V
RoHS : Compliant | 300 : $12.35
250 : $12.51
200 : $12.59
100 : $12.9
50 : $13.22
1 : $28.48
|
| 0
|
WSRSIC005120NPO
| Cyg Wayon Circuit Protection Co Ltd | Diode: Schottky rectifying; DPAK; SiC; SMD; 1.2kV; 5A; tape | | 0
|
WSRSIC005120NNI
| Cyg Wayon Circuit Protection Co Ltd | Diode: Schottky rectifying; SiC; THT; 1.2kV; 5A; TO220ACIns; Ir: 1uA | 2,000 : $1.31
1,000 : $1.41
250 : $1.5
50 : $1.68
10 : $1.91
1 : $2.11
|
| 0
|
ComSIT USA | LE80535LC0051M
| Intel Corporation | RISC Microprocessor, 64-Bit, 1100MHz, CMOS, PBGA479
RoHS : Not Compliant | | 80
|
RJ80535LC0051M
| Intel Corporation | RISC Microprocessor, 64-Bit, 1100MHz, CMOS, PBGA479
RoHS : Not Compliant | | 58
|
Interstate Connecting Components | 385FC005-1206C
| Glenair Inc | 385FC005-1206C | | 0
|
C016 20C005 100 2
| Amphenol Sine Systems | MALE RECEPTACLE 5+PE C16-3 | 1 : $27.7285
25 : $26.9688
50 : $26.6043
100 : $25.9042
1,000 : $20.7055
|
| 0
|
C09131C0051002U
| Amphenol Sine Systems | MALE RECEPTACLE REAR MOUNT 5 P | | 0
|
385HC005-1306C
| Glenair Inc | | | 0
|
C00512-064
| TE Connectivity | GUST-12/25-50/450
RoHS : Compliant | | 0
|
C091 31C005 100 2
| Amphenol Sine Systems | | 1 : $8.115
25 : $7.8926
50 : $7.786
100 : $7.5811
1,000 : $6.2535
|
| 0
|
C01620C0051002
| Amphenol Sine Systems | MALE RECEPTACLE SIZE 2 FLANGE | | 0
|
PEI Genesis | C016-20C005-100-2
| Amphenol Tuchel | | 1 : $0.0
10 : $0.0
25 : $0.0
50 : $0.0
100 : $0.0
|
| 0
|
C091-31C005-100-2
| Amphenol Tuchel | | 1 : $0.0
10 : $0.0
25 : $0.0
50 : $0.0
100 : $0.0
|
| 0
|
Powell Electronics | EC0051-000
| TE Connectivity | Labels and Industrial Warning Signs
RoHS : Compliant | 4,000 : $0.0197
10,000 : $0.016
|
| 2,658
|
Richardson RFPD | WSRSIC005120NPC
| Cyg Wayon Circuit Protection Co Ltd | Silicon Carbide Schottky Diode
RoHS : Not Compliant | | 0
|
Chip 1 Exchange | WRC 00518
| | INSTOCK | | 1,495
|
RJ80535LC0051M
| | INSTOCK | | 5
|
RPGC0051
| | INSTOCK | | 1
|
Avnet Abacus | C01620C0051002
| Amphenol Corporation | 5PE Male receptacle with mounted gasket Mounting hole 432 Suitable sealing for fixing screws m (Alt: C01620C0051002)
RoHS : Compliant | | 100
|
EC0051-000
| TE Connectivity | (Alt: EC0051-000)
RoHS : Compliant | | 0
|
C091 31C005 100 2
| Amphenol Corporation | (Alt: C09131C0051002U)
RoHS : Compliant | | 0
|
FDH Electronics | 385FC005-1206C
| Glenair Inc | Connector Acc | 1 : $309.022
5 : $309.022
10 : $272.667
25 : $257.519
50 : $257.519
100 : $248.321
250 : $239.759
500 : $239.759
1,000 : $231.767
2,500 : $231.767
10,000 : $224.29
|
| 75
|
385HC005-1306C
| Glenair Inc | Connector Acc | 1 : $376.378
5 : $376.378
10 : $332.098
25 : $313.648
50 : $313.648
100 : $302.446
250 : $292.017
500 : $292.017
1,000 : $282.283
2,500 : $282.283
10,000 : $273.177
|
| 4
|
Neutron USA | IPC0051-S
| Chip Quik Inc | Sockets & Adapters PowerSOIC-8 Steel Stencil | | 3
|
Pasternack Enterprises US | PE3C0051/HS2-12
| Pasternack Enterprises | Key Specifications, Connector 1 Series: SMA, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: BNC, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: LMR-195, RF Cable Type: LMR-195, RF Cable Impedance: 50 Ohm, Length, Max: 12 inches. SMA Male to BNC Male Low Loss Cable 12 Inch Length Using LMR-195 Coax with Double HeatShrink., Radio frequency assembly SMA male to BNC male low loss cable 12 inch length using LMR-195 coax with double heatshrink from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The SMA male to BNC male low loss cable 12 inch length using LMR-195 coax with double heatshrink, SMA cable like our other Pasternack coaxial cable assemblies, will ship the same day and any custom SMA to BNC cable assembly orders will ship same day as well. Pasternack RF coax low loss cable assembly is built with SMA cable connection on one end and BNC cable connection on the other. Our low loss SMA to BNC cable assemblies have a male gender on end 1 and male on end 2. PE3C0051/HS2-12 can also be known as a low loss SMA plug to BNC plug cable assembly and will be shipped same-day as it is purchased. SMA plug to BNC plug cable assembly PE3C0051/HS2-12 is built with LMR-195 which is a flexible coax type. The Pasternack flexible SMA cable assembly is manufactured with SMA to BNC cable connectors, has a 50 Ohm impedance and is double shielded. RF specs on this 4 GHz maximum frequency SMA male to BNC male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3C0051/HS2-12 can also be used in the other direction and will be BNC male to SMA male cable assembly if the opposite connectivity is required. Low loss SMA plug to BNC plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality SMA to BNC cable assembly for quick shipment worldwide. Variations of SMA cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this SMA male to BNC male low loss cable 12 inch length using LMR-195 coax with double heatshrink. | 1 : $98.49
25 : $93.57
50 : $88.64
100 : $84.7
|
| 0
|
PE3C0051LF/HS
| Pasternack Enterprises | Key Specifications, Connector Series 1: SMA, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: BNC, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: LMR-195, RF Cable Type: LMR-195, RF Cable Impedance: 50 Ohm. SMA Male to BNC Male Cable Using LMR-195 Coax with HeatShrink, LF Solder. PE3C0051LF/HS is a SMA male to BNC male cable using LMR-195 coax. This Pasternack SMA male to BNC male cable assembly uses a 50 Ohm SMA for connector 1 and a 50 Ohm BNC for connector 2. Our male SMA to male BNC cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE3C0051LF/HS SMA male to BNC male cable assembly is constructed with LMR-195 coax, * LMR™ is a trademark of Times Microwave Systems. | | 0
|
PE3C0051LF-60
| Pasternack Enterprises | Key Specifications, Connector 1 Series: SMA, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: BNC, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: LMR-195, RF Cable Type: LMR-195, RF Cable Impedance: 50 Ohm, Length, Max: 60 inches. SMA Male to BNC Male Low Loss Cable 60 Inch Length Using LMR-195 Coax, LF Solder., Radio frequency assembly SMA male to BNC male low loss cable 60 inch length using LMR-195 coax, LF solder from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The SMA male to BNC male low loss cable 60 inch length using LMR-195 coax, LF solder, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom SMA to BNC cable assembly orders will ship same day as well. Pasternack RF coax low loss cable assembly is built with SMA cable connection on one end and BNC cable connection on the other. Our low loss SMA to BNC cable assemblies have a male gender on end 1 and male on end 2. PE3C0051LF-60 can also be known as a low loss SMA plug to BNC plug cable assembly and will be shipped same-day as it is purchased. SMA plug to BNC plug cable assembly PE3C0051LF-60 is built with LMR-195 which is a flexible coax type. The Pasternack flexible SMA cable assembly is manufactured with SMA to BNC cable connectors, has a 50 Ohms impedance and is double shielded. RF specs on this 4 GHz maximum frequency SMA male to BNC male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3C0051LF-60 can also be used in the other direction and will be BNC male to SMA male cable assembly if the opposite connectivity is required. Low loss SMA plug to BNC plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality SMA to BNC cable assembly for quick shipment worldwide. Variations of SMA cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this SMA male to BNC male low loss cable 60 inch length using LMR-195 coax, LF solder. | 1 : $64.19
25 : $60.98
50 : $57.77
100 : $55.2
|
| 0
|
PE3C0051LF-48
| Pasternack Enterprises | Key Specifications, Connector 1 Series: SMA, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: BNC, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: LMR-195, RF Cable Type: LMR-195, RF Cable Impedance: 50 Ohm, Length, Max: 48 inches. SMA Male to BNC Male Low Loss Cable 48 Inch Length Using LMR-195 Coax, LF Solder., Radio frequency assembly SMA male to BNC male low loss cable 48 inch length using LMR-195 coax, LF solder from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The SMA male to BNC male low loss cable 48 inch length using LMR-195 coax, LF solder, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom SMA to BNC cable assembly orders will ship same day as well. Pasternack RF coax low loss cable assembly is built with SMA cable connection on one end and BNC cable connection on the other. Our low loss SMA to BNC cable assemblies have a male gender on end 1 and male on end 2. PE3C0051LF-48 can also be known as a low loss SMA plug to BNC plug cable assembly and will be shipped same-day as it is purchased. SMA plug to BNC plug cable assembly PE3C0051LF-48 is built with LMR-195 which is a flexible coax type. The Pasternack flexible SMA cable assembly is manufactured with SMA to BNC cable connectors, has a 50 Ohms impedance and is double shielded. RF specs on this 4 GHz maximum frequency SMA male to BNC male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3C0051LF-48 can also be used in the other direction and will be BNC male to SMA male cable assembly if the opposite connectivity is required. Low loss SMA plug to BNC plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality SMA to BNC cable assembly for quick shipment worldwide. Variations of SMA cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this SMA male to BNC male low loss cable 48 inch length using LMR-195 coax, LF solder. | 1 : $63.19
25 : $60.03
50 : $56.87
100 : $54.34
|
| 0
|
PE3C0051-60
| Pasternack Enterprises | Key Specifications, Connector Series 1: SMA, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: BNC, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: LMR-195, RF Cable Type: LMR-195, RF Cable Impedance: 50 Ohm, Length: 60 inches. SMA Male to BNC Male Cable 60 Inch Length Using LMR-195 Coax., Radio frequency assembly SMA male to BNC male cable 60 inch length using LMR-195 coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. SMA male to BNC male cable 60 inch length using LMR-195 coax, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom SMA to BNC cable assembly orders will ship same day as well. Pasternack RF coax low loss cable assembly is built with SMA cable connection on one end and BNC cable connection on the other. Our low loss SMA to BNC cable assemblies have a male gender on end 1 and male on end 2. This SMA to BNC cable is a male to male coax assembly, PE3C0051-60, can also be known as a low loss SMA plug to BNC plug cable assembly and will be shipped same-day as it is purchased. SMA plug to BNC plug cable assembly PE3C0051-60 is built with LMR-195 which is a flexible coax type. The Pasternack flexible SMA cable assembly is manufactured with SMA to BNC cable connectors, has a 50 Ohm impedance and is double shielded. RF specs on this 4 GHz maximum frequency SMA male to BNC male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3C0051-60 can also be used in the other direction and will be BNC male to SMA male cable assembly if the opposite connectivity is required. Low loss SMA plug to BNC plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality SMA to BNC cable assembly for quick shipment worldwide. Variations of SMA cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this SMA male to BNC male cable 60 inch length using LMR-195 coax. | 1 : $70.69
25 : $67.16
50 : $63.62
100 : $60.79
|
| 0
|
PE3C0051LF
| Pasternack Enterprises | Key Specifications, Connector 1 Series: SMA, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: BNC, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: LMR-195, RF Cable Type: LMR-195, RF Cable Impedance: 50 Ohm. SMA Male to BNC Male Low Loss Cable Using LMR-195 Coax, LF Solder., Radio frequency assembly SMA male to BNC male low loss cable using LMR-195 coax, LF solder from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The SMA male to BNC male low loss cable using LMR-195 coax, LF solder, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom SMA to BNC cable assembly orders will ship same day as well. Pasternack RF coax low loss cable assembly is built with SMA cable connection on one end and BNC cable connection on the other. Our low loss SMA to BNC cable assemblies have a male gender on end 1 and male on end 2. PE3C0051LF can also be known as a low loss SMA plug to BNC plug cable assembly and will be shipped same-day as it is purchased. SMA plug to BNC plug cable assembly PE3C0051LF is built with LMR-195 which is a flexible coax type. The Pasternack flexible SMA cable assembly is manufactured with SMA to BNC cable connectors, has a 50 Ohms impedance and is double shielded. RF specs on this 4 GHz maximum frequency SMA male to BNC male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3C0051LF can also be used in the other direction and will be BNC male to SMA male cable assembly if the opposite connectivity is required. Low loss SMA plug to BNC plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality SMA to BNC cable assembly for quick shipment worldwide. Variations of SMA cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this SMA male to BNC male low loss cable using LMR-195 coax, LF solder. | | 0
|
PE3C0051LF-36
| Pasternack Enterprises | Key Specifications, Connector 1 Series: SMA, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: BNC, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: LMR-195, RF Cable Type: LMR-195, RF Cable Impedance: 50 Ohm, Length, Max: 36 inches. SMA Male to BNC Male Low Loss Cable 36 Inch Length Using LMR-195 Coax, LF Solder., Radio frequency assembly SMA male to BNC male low loss cable 36 inch length using LMR-195 coax, LF solder from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The SMA male to BNC male low loss cable 36 inch length using LMR-195 coax, LF solder, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom SMA to BNC cable assembly orders will ship same day as well. Pasternack RF coax low loss cable assembly is built with SMA cable connection on one end and BNC cable connection on the other. Our low loss SMA to BNC cable assemblies have a male gender on end 1 and male on end 2. PE3C0051LF-36 can also be known as a low loss SMA plug to BNC plug cable assembly and will be shipped same-day as it is purchased. SMA plug to BNC plug cable assembly PE3C0051LF-36 is built with LMR-195 which is a flexible coax type. The Pasternack flexible SMA cable assembly is manufactured with SMA to BNC cable connectors, has a 50 Ohms impedance and is double shielded. RF specs on this 4 GHz maximum frequency SMA male to BNC male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3C0051LF-36 can also be used in the other direction and will be BNC male to SMA male cable assembly if the opposite connectivity is required. Low loss SMA plug to BNC plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality SMA to BNC cable assembly for quick shipment worldwide. Variations of SMA cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this SMA male to BNC male low loss cable 36 inch length using LMR-195 coax, LF solder. | 1 : $63.19
25 : $60.03
50 : $56.87
100 : $54.34
|
| 0
|
PE3C0051/HS2-24
| Pasternack Enterprises | Key Specifications, Connector 1 Series: SMA, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: BNC, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: LMR-195, RF Cable Type: LMR-195, RF Cable Impedance: 50 Ohm, Length, Max: 24 inches. SMA Male to BNC Male Low Loss Cable 24 Inch Length Using LMR-195 Coax with Double HeatShrink., Radio frequency assembly SMA male to BNC male low loss cable 24 inch length using LMR-195 coax with double heatshrink from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The SMA male to BNC male low loss cable 24 inch length using LMR-195 coax with double heatshrink, SMA cable like our other Pasternack coaxial cable assemblies, will ship the same day and any custom SMA to BNC cable assembly orders will ship same day as well. Pasternack RF coax low loss cable assembly is built with SMA cable connection on one end and BNC cable connection on the other. Our low loss SMA to BNC cable assemblies have a male gender on end 1 and male on end 2. PE3C0051/HS2-24 can also be known as a low loss SMA plug to BNC plug cable assembly and will be shipped same-day as it is purchased. SMA plug to BNC plug cable assembly PE3C0051/HS2-24 is built with LMR-195 which is a flexible coax type. The Pasternack flexible SMA cable assembly is manufactured with SMA to BNC cable connectors, has a 50 Ohm impedance and is double shielded. RF specs on this 4 GHz maximum frequency SMA male to BNC male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3C0051/HS2-24 can also be used in the other direction and will be BNC male to SMA male cable assembly if the opposite connectivity is required. Low loss SMA plug to BNC plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality SMA to BNC cable assembly for quick shipment worldwide. Variations of SMA cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this SMA male to BNC male low loss cable 24 inch length using LMR-195 coax with double heatshrink. | 1 : $93.09
25 : $88.44
50 : $83.78
100 : $80.06
|
| 0
|
PE3C0051/HS
| Pasternack Enterprises | | | 0
|
PE3C0051/HS2-48
| Pasternack Enterprises | Key Specifications, Connector 1 Series: SMA, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: BNC, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: LMR-195, RF Cable Type: LMR-195, RF Cable Impedance: 50 Ohm, Length, Max: 48 inches. SMA Male to BNC Male Low Loss Cable 48 Inch Length Using LMR-195 Coax with Double HeatShrink., Radio frequency assembly SMA male to BNC male low loss cable 48 inch length using LMR-195 coax with double heatshrink from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The SMA male to BNC male low loss cable 48 inch length using LMR-195 coax with double heatshrink, SMA cable like our other Pasternack coaxial cable assemblies, will ship the same day and any custom SMA to BNC cable assembly orders will ship same day as well. Pasternack RF coax low loss cable assembly is built with SMA cable connection on one end and BNC cable connection on the other. Our low loss SMA to BNC cable assemblies have a male gender on end 1 and male on end 2. PE3C0051/HS2-48 can also be known as a low loss SMA plug to BNC plug cable assembly and will be shipped same-day as it is purchased. SMA plug to BNC plug cable assembly PE3C0051/HS2-48 is built with LMR-195 which is a flexible coax type. The Pasternack flexible SMA cable assembly is manufactured with SMA to BNC cable connectors, has a 50 Ohm impedance and is double shielded. RF specs on this 4 GHz maximum frequency SMA male to BNC male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3C0051/HS2-48 can also be used in the other direction and will be BNC male to SMA male cable assembly if the opposite connectivity is required. Low loss SMA plug to BNC plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality SMA to BNC cable assembly for quick shipment worldwide. Variations of SMA cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this SMA male to BNC male low loss cable 48 inch length using LMR-195 coax with double heatshrink. | 1 : $96.29
25 : $91.48
50 : $86.66
100 : $82.81
|
| 0
|
PE3C0051/HS2-36
| Pasternack Enterprises | Key Specifications, Connector 1 Series: SMA, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: BNC, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: LMR-195, RF Cable Type: LMR-195, RF Cable Impedance: 50 Ohm, Length, Max: 36 inches. SMA Male to BNC Male Low Loss Cable 36 Inch Length Using LMR-195 Coax with Double HeatShrink., Radio frequency assembly SMA male to BNC male low loss cable 36 inch length using LMR-195 coax with double heatshrink from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The SMA male to BNC male low loss cable 36 inch length using LMR-195 coax with double heatshrink, SMA cable like our other Pasternack coaxial cable assemblies, will ship the same day and any custom SMA to BNC cable assembly orders will ship same day as well. Pasternack RF coax low loss cable assembly is built with SMA cable connection on one end and BNC cable connection on the other. Our low loss SMA to BNC cable assemblies have a male gender on end 1 and male on end 2. PE3C0051/HS2-36 can also be known as a low loss SMA plug to BNC plug cable assembly and will be shipped same-day as it is purchased. SMA plug to BNC plug cable assembly PE3C0051/HS2-36 is built with LMR-195 which is a flexible coax type. The Pasternack flexible SMA cable assembly is manufactured with SMA to BNC cable connectors, has a 50 Ohm impedance and is double shielded. RF specs on this 4 GHz maximum frequency SMA male to BNC male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3C0051/HS2-36 can also be used in the other direction and will be BNC male to SMA male cable assembly if the opposite connectivity is required. Low loss SMA plug to BNC plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality SMA to BNC cable assembly for quick shipment worldwide. Variations of SMA cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this SMA male to BNC male low loss cable 36 inch length using LMR-195 coax with double heatshrink. | 1 : $94.19
25 : $89.48
50 : $84.77
100 : $81.0
|
| 0
|
PE3C0051-36
| Pasternack Enterprises | Key Specifications, Connector Series 1: SMA, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: BNC, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: LMR-195, RF Cable Type: LMR-195, RF Cable Impedance: 50 Ohm, Length: 36 inches. SMA Male to BNC Male Cable 36 Inch Length Using LMR-195 Coax., Radio frequency assembly SMA male to BNC male cable 36 inch length using LMR-195 coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. SMA male to BNC male cable 36 inch length using LMR-195 coax, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom SMA to BNC cable assembly orders will ship same day as well. Pasternack RF coax low loss cable assembly is built with SMA cable connection on one end and BNC cable connection on the other. Our low loss SMA to BNC cable assemblies have a male gender on end 1 and male on end 2. This SMA to BNC cable is a male to male coax assembly, PE3C0051-36, can also be known as a low loss SMA plug to BNC plug cable assembly and will be shipped same-day as it is purchased. SMA plug to BNC plug cable assembly PE3C0051-36 is built with LMR-195 which is a flexible coax type. The Pasternack flexible SMA cable assembly is manufactured with SMA to BNC cable connectors, has a 50 Ohm impedance and is double shielded. RF specs on this 4 GHz maximum frequency SMA male to BNC male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3C0051-36 can also be used in the other direction and will be BNC male to SMA male cable assembly if the opposite connectivity is required. Low loss SMA plug to BNC plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality SMA to BNC cable assembly for quick shipment worldwide. Variations of SMA cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this SMA male to BNC male cable 36 inch length using LMR-195 coax. | 1 : $68.49
25 : $65.07
50 : $61.64
100 : $58.9
|
| 0
|
PE3C0051LF-12
| Pasternack Enterprises | Key Specifications, Connector 1 Series: SMA, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: BNC, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: LMR-195, RF Cable Type: LMR-195, RF Cable Impedance: 50 Ohm, Length, Max: 12 inches. SMA Male to BNC Male Low Loss Cable 12 Inch Length Using LMR-195 Coax, LF Solder., Radio frequency assembly SMA male to BNC male low loss cable 12 inch length using LMR-195 coax, LF solder from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The SMA male to BNC male low loss cable 12 inch length using LMR-195 coax, LF solder, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom SMA to BNC cable assembly orders will ship same day as well. Pasternack RF coax low loss cable assembly is built with SMA cable connection on one end and BNC cable connection on the other. Our low loss SMA to BNC cable assemblies have a male gender on end 1 and male on end 2. PE3C0051LF-12 can also be known as a low loss SMA plug to BNC plug cable assembly and will be shipped same-day as it is purchased. SMA plug to BNC plug cable assembly PE3C0051LF-12 is built with LMR-195 which is a flexible coax type. The Pasternack flexible SMA cable assembly is manufactured with SMA to BNC cable connectors, has a 50 Ohms impedance and is double shielded. RF specs on this 4 GHz maximum frequency SMA male to BNC male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3C0051LF-12 can also be used in the other direction and will be BNC male to SMA male cable assembly if the opposite connectivity is required. Low loss SMA plug to BNC plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality SMA to BNC cable assembly for quick shipment worldwide. Variations of SMA cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this SMA male to BNC male low loss cable 12 inch length using LMR-195 coax, LF solder. | 1 : $58.89
25 : $55.95
50 : $53.0
100 : $50.65
|
| 0
|
PE3C0051-48
| Pasternack Enterprises | Key Specifications, Connector Series 1: SMA, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: BNC, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: LMR-195, RF Cable Type: LMR-195, RF Cable Impedance: 50 Ohm, Length: 48 inches. SMA Male to BNC Male Cable 48 Inch Length Using LMR-195 Coax., Radio frequency assembly SMA male to BNC male cable 48 inch length using LMR-195 coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. SMA male to BNC male cable 48 inch length using LMR-195 coax, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom SMA to BNC cable assembly orders will ship same day as well. Pasternack RF coax low loss cable assembly is built with SMA cable connection on one end and BNC cable connection on the other. Our low loss SMA to BNC cable assemblies have a male gender on end 1 and male on end 2. This SMA to BNC cable is a male to male coax assembly, PE3C0051-48, can also be known as a low loss SMA plug to BNC plug cable assembly and will be shipped same-day as it is purchased. SMA plug to BNC plug cable assembly PE3C0051-48 is built with LMR-195 which is a flexible coax type. The Pasternack flexible SMA cable assembly is manufactured with SMA to BNC cable connectors, has a 50 Ohm impedance and is double shielded. RF specs on this 4 GHz maximum frequency SMA male to BNC male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3C0051-48 can also be used in the other direction and will be BNC male to SMA male cable assembly if the opposite connectivity is required. Low loss SMA plug to BNC plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality SMA to BNC cable assembly for quick shipment worldwide. Variations of SMA cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this SMA male to BNC male cable 48 inch length using LMR-195 coax. | 1 : $73.89
25 : $70.2
50 : $66.5
100 : $63.55
|
| 0
|
PE3C0051LF-24
| Pasternack Enterprises | Key Specifications, Connector 1 Series: SMA, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: BNC, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: LMR-195, RF Cable Type: LMR-195, RF Cable Impedance: 50 Ohm, Length, Max: 24 inches. SMA Male to BNC Male Low Loss Cable 24 Inch Length Using LMR-195 Coax, LF Solder., Radio frequency assembly SMA male to BNC male low loss cable 24 inch length using LMR-195 coax, LF solder from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The SMA male to BNC male low loss cable 24 inch length using LMR-195 coax, LF solder, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom SMA to BNC cable assembly orders will ship same day as well. Pasternack RF coax low loss cable assembly is built with SMA cable connection on one end and BNC cable connection on the other. Our low loss SMA to BNC cable assemblies have a male gender on end 1 and male on end 2. PE3C0051LF-24 can also be known as a low loss SMA plug to BNC plug cable assembly and will be shipped same-day as it is purchased. SMA plug to BNC plug cable assembly PE3C0051LF-24 is built with LMR-195 which is a flexible coax type. The Pasternack flexible SMA cable assembly is manufactured with SMA to BNC cable connectors, has a 50 Ohms impedance and is double shielded. RF specs on this 4 GHz maximum frequency SMA male to BNC male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3C0051LF-24 can also be used in the other direction and will be BNC male to SMA male cable assembly if the opposite connectivity is required. Low loss SMA plug to BNC plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality SMA to BNC cable assembly for quick shipment worldwide. Variations of SMA cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this SMA male to BNC male low loss cable 24 inch length using LMR-195 coax, LF solder. | 1 : $60.99
25 : $57.94
50 : $54.89
100 : $52.45
|
| 0
|
Vyrian | MDOC00517_E
| Broadcom Limited | | | 7,536
|
8N4DV85AC-0051CDI8
| Integrated Device Technology Inc | LVDS Output Clock Oscillator
RoHS : Compliant | | 748
|
C09131C0051002
| Amphenol Corporation | Circular Connector, 5 Contact(s), Metal, Male, Solder Terminal, Receptacle | | 380
|
British ▼ 
English
Chinese
German
Japanese
Russian
Korean
Spanish
French
Italian
Portuguese
Polish
Vietnamese
Indian
Mexican
New Zealand