C10-R22M-R Price, Distributor, Stock

Key Specifications, Connector 1 Series: SMA, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: MCX, Connector 2 Gender: Plug, Connector Angle 2: Right Angle, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: RG178B/U, RF Cable Type: RG178, RF Cable Impedance: 50 Ohm. SMA Male to MCX Plug Right Angle Cable Using RG178 Coax with HeatShrink., Radio frequency assembly SMA male to MCX plug right angle cable using RG178 coax with heatshrink from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, general use, etc. The SMA male to MCX plug right angle cable using RG178 coax with heatshrink, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom SMA to MCX cable assembly orders will ship the same business day as well. Pasternack RF coax cable assembly is built with a SMA cable connection on one end and a right angle MCX cable connection on the other. Our SMA to right angle MCX cable assembly has a male gender on end 1 and a plug on end 2. PE3C100020/HS can also be known as a SMA plug to right angle MCX male cable assembly and will be shipped the same day as it is purchased. This flexible RF cable assembly with a 0.5-inch diameter has copper clad steel as the cable's inner conducting material and PTFE dielectric type. This cable assembly employs durable and flexible materials, and with a 0.4-inch bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. Our PE3C100020/HS RF cable has a FEP jacket of 0.072-inch diameter. This radio frequency cable assembly can withstand temperatures ranging from -55 to 125 degrees C. The flexible RF cable has a between series connection. Our SMA male to right angle MCX plug cable has a maximum VSWR of 1.5:1. SMA plug to MCX male cable assembly PE3C100020/HS is built with RG178 which is a flexible coax type. The Pasternack flexible SMA cable assembly is manufactured with SMA to right angle MCX cable connectors, has a 50 Ohm impedance, and is single shielded. Both the connectors have a crimp/solder attachment method. Additional dimensions, specifications and CAD drawings for this RF cable are available on our downloadable PDF datasheet. PE3C100020/HS can also be used in the other direction and will be a right angle MCX plug to SMA male cable assembly if the opposite connectivity is required. SMA plug to MCX right angle male cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality SMA to MCX cable assembly for quick shipment worldwide. Variations of SMA and MCX cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal SMA to MCX RF cable assembly as per your requirements.

105

PE3C100095

Pasternack Enterprises

Key Specifications, Connector 1 Series: MHF1, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: SMA, Connector 2 Gender: Female, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector Mount Method 2: Bulkhead, Connector 2 Impedance: 50 Ohm, RF Cable Impedance: 50 Ohm. MHF1 to SMA Female Bulkhead (with O-ring) Cable Assembly Using O.D. 1.37mm Cable., Pasternack’s PE3C100095 MHF1 to SMA female bulkhead RF cable assembly is part of one of the largest selections of same-day ship coaxial cables for RF, microwave, and millimeter wave interconnect solutions. These coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, defense/military, telecom antenna tower component jumper connection, production environments, general use, etc. The MHF1 to SMA female cable, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom MHF1 to SMA cable assembly orders will ship the same business day as well. Pasternack RF cable assembly is built with an MHF1 cable connection on one end and an SMA bulkhead cable connection on the other. PE3C100095 can also be known as an MHF1 to SMA jack cable assembly and will be shipped the same day as it is purchased. This RF cable assembly with a 0.054-inch diameter has copper as the cable’s inner conducting material and FEP dielectric type. The MHF1 to SMA cable from Pasternack is ideal for applications including external antenna connection (Wi-Fi, Bluetooth, LTE, 5G, and GPS receivers), improving signal strength (embedded systems inside metal enclosures), prototyping and development and IoT and embedded systems (drones and robotics). The minimum bend radius for this cable is 0.314 inches, allowing for a single bend without damaging the cable. Our PE3C100095 RF cable has an FEP jacket of 0.054-inch diameter. This radio frequency cable assembly can withstand temperatures ranging from -40 to 125 degrees C. This cable assembly has a typical propagation velocity of 70%. Our MHF1 to bulkhead SMA female cable has a maximum VSWR of 1.5:1. This single shielded cable assembly has a tinned copper shield layer. The Pasternack MHF1 cable assembly is manufactured with MHF1 to SMA cable connectors, has a 50 Ohm impedance, and is single shielded. Additional dimensions, specifications, and CAD drawings for this RF cable are available on our downloadable PDF datasheet. PE3C100095 can also be used in the other direction and will be an SMA jack bulkhead to MHF1 cable assembly if the opposite connectivity is required. This MHF1 to SMA jack bulkhead cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality MHF1 to SMA cable assembly for quick shipment worldwide. Variations of MHF1 and SMA cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High-quality custom RF cable assembly products for microwave and millimeter wave radio transmitters, receivers, antenna jumpers, component interconnections, RF test and measurement labs, military/defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment, and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal MHF1 to SMA RF cable assembly as per your requirements.

PE3C1000-50CM

Pasternack Enterprises

Key Specifications, Connector Series 1: N, Connector Gender 1: Female, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: Bulkhead, Connector Impedance 1: 50 Ohm, Connector Series 2: N, Connector Gender 2: Female, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: Bulkhead, Connector Impedance 2: 50 Ohm, RF Cable Part Number: PE-P142LL, RF Cable Type: PE-P142LL, RF Cable Impedance: 50 Ohm, Length: 19.69 inches. N Female Bulkhead to N Female Bulkhead Low Loss Cable 50 cm Length Using PE-P142LL Coax, RoHS., Radio frequency assembly N female bulkhead to N female bulkhead low loss cable 50 cm length using PE-P142LL coax, RoHS from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. N female bulkhead to N female bulkhead low loss cable 50 cm length using PE-P142LL coax, RoHS, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom type N to type N cable assembly orders will ship same day as well. Pasternack RF coax low loss cable assembly is built with N type bulkhead cable connection on one end and type N bulkhead cable connection on the other. Our low loss N type to type N cable assemblies have a female gender on end 1 and female on end 2. This type N to type N cable is a female to female coax assembly, PE3C1000-50CM, can also be known as a low loss N type jack to type N jack cable assembly and will be shipped same-day as it is purchased. N type jack to type N jack cable assembly PE3C1000-50CM is built with PE-P142LL which is a flexible coax type. The Pasternack flexible N cable assembly is manufactured with N type to type N cable connectors, has a 50 Ohm impedance and is triple shielded. RF specs on this 18 GHz maximum frequency type N female bulkhead to type N female bulkhead cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. Low loss N type jack bulkhead to type N jack bulkhead cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality type N to type N cable assembly for quick shipment worldwide. Variations of type N cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this N female bulkhead to N female bulkhead low loss cable 50 cm length using PE-P142LL coax, RoHS.

1 : $389.99
25 : $370.49
50 : $350.99

PE3C10015

Pasternack Enterprises

PE3C1002LF/HS

Pasternack Enterprises

Key Specifications, Connector 1 Series: SMP, Connector 1 Gender: Female, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: SMP, Connector 2 Gender: Female, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Beryllium Copper, Connector 1 Body Plating: Gold, RF Cable Part Number: PE-P086, RF Cable Type: PE-P086, RF Cable Impedance: 50 Ohm. SMP Female to SMP Female Cable Using PE-P086 Coax with HeatShrink, LF Solder., Radio frequency assembly SMP female to SMP female cable using PE-P086 coax with heatshrink, LF solder from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. The SMP female to SMP female cable using PE-P086 coax with heatshrink, LF solder, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom SMP to SMP cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with SMP cable connection on one end and SMP cable connection on the other. Our SMP to SMP cable assemblies have a female gender on end 1 and female on end 2. PE3C1002LF/HS can also be known as a SMP jack to SMP jack cable assembly and will be shipped same-day as it is purchased. SMP jack to SMP jack cable assembly PE3C1002LF/HS is built with PE-P086 which is a flexible coax type. The Pasternack flexible SMP cable assembly is manufactured with SMP to SMP cable connectors, has a 50 Ohm impedance and is double shielded. RF specs on this 18 GHz maximum frequency SMP female to SMP female cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. SMP jack to SMP jack cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality SMP to SMP cable assembly for quick shipment worldwide. Variations of SMP cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this SMP female to SMP female cable using PE-P086 coax with heatshrink, LF solder.

PE3C10035/HS

Pasternack Enterprises

PE3C10060

Pasternack Enterprises

PE3C10083-6

Pasternack Enterprises

Key Specifications, Connector 1 Series: 3.5mm, Connector 1 Gender: Female, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: TNC, Connector 2 Gender: Female, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector Mount Method 2: Bulkhead, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Passivated Stainless Steel, RF Cable Part Number: PE-SR402FL, RF Cable Type: PE-SR402FL, RF Cable Impedance: 50 Ohm, Length, Max: 6 inches. 3.5mm Female to TNC Female Bulkhead Cable 6 Inch Length Using PE-SR402FL Coax., Radio frequency assembly 3.5mm female to TNC female bulkhead cable 6 inch length using PE-SR402FL coax from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, general use, etc. The 3.5mm female to TNC female bulkhead cable 6 inch length using PE-SR402FL coax, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom 3.5mm to TNC cable assembly orders will the ship same business day as well. Pasternack RF coax cable assembly is built with a 3.5mm cable connection on one end and a TNC bulkhead cable connection on the other. Our a 3.5mm to a TNC cable assembly has female gender on end 1 and female on end 2. PE3C10083-6 can also be known as a 3.5mm jack to TNC jack cable assembly and will be shipped the same day as it is purchased. This RF cable assembly with a 0.5-inch diameter has copper as the cable's inner conducting material and PTFE dielectric type. This cable assembly employs durable and flexible materials, and with a 0.625-inch bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. The formable RF cable has a between series connection. This cable assembly has a typical propagation velocity of 69.5% and a minimum RF shielding of 110 dB. 3.5mm jack to TNC jack cable assembly PE3C10083-6 is built with PE-SR402FL which is a formable coax type. The Pasternack formable 3.5mm cable assembly is manufactured with 3.5mm to TNC cable connectors and has a 50 Ohm impedance. One connector features the clamp/solder attachment method and a passivated stainless steel body with plating, while the other has the solder/solder attachment method and brass body with nickel plating. Additional dimensions, specifications and CAD drawings for this RF cable are available on our downloadable PDF datasheet. PE3C10083-6 can also be used in the other direction and will be TNC female bulkhead to 3.5mm female cable assembly if the opposite connectivity is required. 3.5mm jack to TNC jack bulkhead cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality 3.5mm to TNC cable assembly for quick shipment worldwide. Variations of 3.5mm and TNC cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal 3.5mm to TNC RF cable assembly as per your requirements.

1 : $220.99
25 : $209.94
50 : $198.89
100 : $190.05

PE3C10094-24

Pasternack Enterprises

Key Specifications, Connector 1 Series: 3.5mm, Connector 1 Gender: Female, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: N, Connector 2 Gender: Female, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector Mount Method 2: Bulkhead, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Passivated Stainless Steel, RF Cable Part Number: PE-SR402FL, RF Cable Type: PE-SR402FL, RF Cable Impedance: 50 Ohm, Length, Max: 24 inches. 3.5mm Female to N Female Bulkhead Cable 24 Inch Length Using PE-SR402FL Coax., Radio frequency assembly 3.5mm female to N female bulkhead cable 24 inch length using PE-SR402FL coax from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, general use, etc. The 3.5mm female to N female bulkhead cable 24 inch length using PE-SR402FL coax, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom 3.5mm to type N cable assembly orders will the ship same business day as well. Pasternack RF coax cable assembly is built with a 3.5mm cable connection on one end and a type N bulkhead cable connection on the other. Our a 3.5mm to a type N cable assembly has female gender on end 1 and female on end 2. PE3C10094-24 can also be known as a 3.5mm jack to type N jack cable assembly and will be shipped the same day as it is purchased. This RF cable assembly with a 0.5-inch diameter has copper as the cable's inner conducting material and PTFE dielectric type. This cable assembly employs durable and flexible materials, and with a 0.625-inch bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. The formable RF cable has a between series connection. This cable assembly has a typical propagation velocity of 69.5% and a minimum RF shielding of 110 dB. 3.5mm jack to type N jack cable assembly PE3C10094-24 is built with PE-SR402FL which is a formable coax type. The Pasternack formable 3.5mm cable assembly is manufactured with 3.5mm to type N cable connectors and has a 50 Ohm impedance. One connector features the clamp/solder attachment method and a passivated stainless steel body with plating, while the other has the solder/solder attachment method and brass body with nickel plating. Additional dimensions, specifications and CAD drawings for this RF cable are available on our downloadable PDF datasheet. PE3C10094-24 can also be used in the other direction and will be type N female bulkhead to 3.5mm female cable assembly if the opposite connectivity is required. 3.5mm jack to type N jack bulkhead cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality 3.5mm to type N cable assembly for quick shipment worldwide. Variations of 3.5mm and type N cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal 3.5mm to type N RF cable assembly as per your requirements.

1 : $248.99
25 : $236.54
50 : $224.09
100 : $214.13

PE3C10097

Pasternack Enterprises

Key Specifications, Connector 1 Series: 3.5mm, Connector 1 Gender: Female, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector Mount Method 1: Bulkhead, Connector 1 Impedance: 50 Ohm, Connector 2 Series: N, Connector 2 Gender: Female, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Passivated Stainless Steel, RF Cable Part Number: PE-SR402FL, RF Cable Type: PE-SR402FL, RF Cable Impedance: 50 Ohm. 3.5mm Female Bulkhead to N Female Cable Using PE-SR402FL Coax., Radio frequency assembly 3.5mm female bulkhead to N female cable using PE-SR402FL coax from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, general use, etc. The 3.5mm female bulkhead to N female cable using PE-SR402FL coax, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom 3.5mm to type N cable assembly orders will the ship same business day as well. Pasternack RF coax cable assembly is built with a 3.5mm bulkhead cable connection on one end and a type N cable connection on the other. Our a 3.5mm to a type N cable assembly has female gender on end 1 and female on end 2. PE3C10097 can also be known as a 3.5mm jack to type N jack cable assembly and will be shipped the same day as it is purchased. This RF cable assembly with a 0.5-inch diameter has copper as the cable's inner conducting material and PTFE dielectric type. This cable assembly employs durable and flexible materials, and with a 0.625-inch bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. The formable RF cable has a between series connection. This cable assembly has a typical propagation velocity of 69.5% and a minimum RF shielding of 110 dB. 3.5mm jack to type N jack cable assembly PE3C10097 is built with PE-SR402FL which is a formable coax type. The Pasternack formable 3.5mm cable assembly is manufactured with 3.5mm to type N cable connectors and has a 50 Ohm impedance. One connector features the clamp/solder attachment method and a passivated stainless steel body with plating, while the other has the solder/solder attachment method and brass body with nickel plating. Additional dimensions, specifications and CAD drawings for this RF cable are available on our downloadable PDF datasheet. PE3C10097 can also be used in the other direction and will be type N female to 3.5mm female bulkhead cable assembly if the opposite connectivity is required. 3.5mm jack bulkhead to type N jack cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality 3.5mm to type N cable assembly for quick shipment worldwide. Variations of 3.5mm and type N cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal 3.5mm to type N RF cable assembly as per your requirements.

PE3C10141

Pasternack Enterprises

PE3C10149LF

Pasternack Enterprises

PE3C10178

Pasternack Enterprises

PE3C10235-36

Pasternack Enterprises

Key Specifications, Connector 1 Series: N, Connector 1 Gender: Female, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: TNC, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: LMR-195, RF Cable Type: LMR-195, RF Cable Impedance: 50 Ohm, Length, Max: 36 inches. N Female to TNC Male Low Loss Cable 36 Inch Length Using LMR-195 Coax., Radio frequency assembly N female to TNC male low loss cable 36 inch length using LMR-195 coax from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The N female to TNC male low loss cable 36 inch length using LMR-195 coax, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom type N to TNC cable assembly orders will ship the same business day as well. Pasternack RF coax low loss cable assembly is built with a type N cable connection on one end and a TNC cable connection on the other. Our low loss type N to TNC cable assembly has a female gender on end 1 and a male on end 2. PE3C10235-36 can also be known as a low loss type N jack to TNC plug cable assembly and will be shipped the same day as it is purchased. This flexible RF cable assembly with a 0.5-inch diameter has copper as the cable's inner conducting material and PE (F) dielectric type. This cable assembly employs durable and flexible materials, and with a 2-inch bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. Our PE3C10235-36 RF cable has a PE jacket of 0.195-inch diameter. The flexible RF cable has a between series connection. This cable assembly has a typical propagation velocity of 80% and a minimum RF shielding of 90 dB. Our type N female to TNC male cable has a maximum VSWR of 1.4:1. Type N jack to TNC plug cable assembly PE3C10235-36 is built with LMR-195 which is a flexible coax type. The Pasternack flexible type N cable assembly is manufactured with type N to TNC cable connectors, has a 50 Ohm impedance, and is double shielded. Both the connectors have a crimp/solder attachment method and a brass body. Additional dimensions, specifications and CAD drawings for this low loss RF cable are available on our downloadable PDF datasheet. PE3C10235-36 can also be used in the other direction and will be a TNC male to type N female cable assembly if the opposite connectivity is required. Low loss type N jack to TNC plug cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality type N to TNC cable assembly for quick shipment worldwide. Variations of type N and TNC cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal type N to TNC low loss RF cable assembly as per your requirements. LMR® is a registered trademark of Times Microwave Systems.

1 : $68.49
25 : $65.07
50 : $61.64
100 : $58.9

PE3C10256-24

Pasternack Enterprises

Key Specifications, Connector 1 Series: BNC, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 75 Ohm, Connector 2 Series: BNC, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 75 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Tri-Metal, RF Cable Part Number: LMR-400-75-DB, RF Cable Type: LMR-400-75-DB, RF Cable Impedance: 75 Ohm, Length, Max: 24 inches. 75 Ohm BNC Male to 75 Ohm BNC Male Low Loss Cable 24 Inch Length Using 75 Ohm LMR-400-75-DB Coax with Times Microwave Components., Radio frequency assembly 75 Ohm BNC male to 75 Ohm BNC male low loss cable 24 inch length using 75 Ohm LMR-400-75-DB coax with Times Microwave components from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The 75 Ohm BNC male to 75 Ohm BNC male low loss cable 24 inch length using 75 Ohm LMR-400-75-DB coax with Times Microwave components, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom BNC to BNC cable assembly orders will ship same business day as well. Pasternack RF coax low loss cable assembly is built with BNC cable connection on one end and BNC cable connection on the other. Our low loss BNC to BNC cable assembly has male gender on end 1 and male on end 2. PE3C10256-24 can also be known as a low loss BNC plug to BNC plug cable assembly and will be shipped same-day as it is purchased. This RF cable assembly with 0.5 inches diameter has copper as cable inner conducting material and Foam PE dielectric type. Our PE3C10256-24 RF cable has a PE jacket of 0.405-inch diameter. This radio frequency cable assembly can withstand temperatures ranging from -40 to 85 degrees C. The RF cable has an in-series connection. BNC plug to BNC plug cable assembly PE3C10256-24 is built with LMR-400-75-DB which is a coax type. The Pasternack BNC cable assembly is manufactured with BNC to BNC cable connectors, has a 75 Ohm impedance. Both the connectors have a crimp attachment method and a brass body with tri-metal plating. Additional dimensions, specifications and CAD drawings for this low loss RF cable are available on our downloadable PDF datasheet. Low loss BNC plug to BNC plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality BNC to BNC cable assembly for quick shipment worldwide. Variations of BNC and BNC cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal BNC to BNC low loss RF cable assembly as per your requirements. LMR® is a registered trademark of Times Microwave Systems.

1 : $158.99
10 : $155.81
25 : $152.63
100 : $149.45

TE Connectivity

MRSSV1DC10THT

TE Connectivity

MRSSV 2.54 BL SD COM 10 T-H POST TUB Number of Positions: 10 Rotary Switch Type: Rotary DIP Number of Switches: 10 Operating Function: BDC Complement Circuit Actuator Style: Screwdriver Slot Actuator Sealed And Unsealed Rotary Switch | 10 Rotary DIP BDC Complement Circuit | Part Number: MRSSV1DC10THT | Internal Number: 2396234-5 | TE Connectivity
RoHS : Compliant

2,500 : $9.98
1,000 : $10.25
500 : $10.52
250 : $10.79
100 : $11.06
50 : $11.33
25 : $11.6
10 : $11.87
1 : $12.14

3,600

HSC10039RJ

TE Connectivity

HSC100 39R 5% Resistance Value: 39 Ω Element Type: Wire Wound Passive Component Tolerance: 5 % Resistor Type: Power Resistor Resistance Class: Up to 1kΩ Chassis Mount Resistor | 39 Ω Wire Wound 5 % Power Resistor | Part Number: HSC10039RJ | Internal Number: 3-1625999-0 | TE Connectivity
RoHS : Compliant

10 : $24.51
1 : $27.24

769

HSC10050RJ

TE Connectivity

HSC100 50R 5% Resistance Value: 50 Ω Element Type: Wire Wound Passive Component Tolerance: 5 % Resistor Type: Power Resistor Resistance Class: Up to 1kΩ Power Resistors: Aluminum Housed & Hsa | 50 Ω Wire Wound 5 % Power Resistor | Part Number: HSC10050RJ | Internal Number: 6-1625999-9 | TE Connectivity
RoHS : Compliant

10 : $24.53
1 : $27.25

491

C104K7JL

TE Connectivity

C10 4K7 5% (LOOSE) Resistance Value: 4.7K Ω Element Type: Wire Wound Resistor Type: Power Resistor Passive Component Tolerance: 5 % Power Rating: 10 W Through-Hole Resistor | 4.7K Ω Wire Wound Power Resistor 5 % | Part Number: C104K7JL | Internal Number: 2-1623773-8 | TE Connectivity
RoHS : Compliant

250 : $5.45
100 : $5.67
50 : $5.89
25 : $6.1
10 : $6.32
1 : $6.54

271

HSC1006R4J

TE Connectivity

HSC100 6R4 5% Resistance Value: 6.4 Ω Element Type: Wire Wound Passive Component Tolerance: 5 % Resistor Type: Power Resistor Resistance Class: Up to 1kΩ Chassis Mount Resistor | 6.4 Ω Wire Wound 5 % Power Resistor | Part Number: HSC1006R4J | Internal Number: 4-1625999-7 | TE Connectivity
RoHS : Compliant

10 : $24.51
1 : $27.24

HSC100R82J

TE Connectivity

HSC100 R82 5% Resistance Value: .82 Ω Element Type: Wire Wound Passive Component Tolerance: 5 % Resistor Type: Power Resistor Resistance Class: Up to 1kΩ 0.82 Ω Wire Wound 5 % Power Resistor | Chassis Mount Resistor | Part Number: HSC100R82J | Internal Number: 6-1625999-1 | TE Connectivity
RoHS : Compliant

10 : $24.53
1 : $27.25

HSC100S560RJ

TE Connectivity

HSC100S 560R 5% Screw Terminal Resistance Value: 560 Ω Element Type: Wire Wound Passive Component Tolerance: 5 % Resistor Type: Power Resistor Resistance Class: Up to 1kΩ Power Resistors: Aluminium Housed & Hsc | 560 Ω Wire Wound 5 % Power Resistor | Part Number: HSC100S560RJ | Internal Number: 4-2176731-9 | TE Connectivity
RoHS : Compliant

10 : $45.43
1 : $50.48

HSC100S1K5J

TE Connectivity

HSC100S 1K5 5% Screw Terminal Resistance Value: 1.5K Ω Element Type: Wire Wound Passive Component Tolerance: 5 % Resistor Type: Power Resistor Resistance Class: 1kΩ – 1MΩ Power Resistors: Aluminium Housed & Hsc | 1.5K Ω Wire Wound 5 % Power Resistor | Part Number: HSC100S1K5J | Internal Number: 5-2176731-4 | TE Connectivity
RoHS : Compliant

10 : $45.43
1 : $50.48

C1010KJL

TE Connectivity

C10 10K 5% (LOOSE) Resistance Value: 10K Ω Element Type: Wire Wound Resistor Type: Power Resistor Passive Component Tolerance: 5 % Power Rating: 10 W Through-Hole Resistor | 10K Ω Wire Wound Power Resistor 5 % | Part Number: C1010KJL | Internal Number: 1623773-8 | TE Connectivity
RoHS : Compliant

250 : $5.72
100 : $5.95
50 : $6.18
25 : $6.41
10 : $6.64
1 : $6.87

HSC100S3R9J

TE Connectivity

HSC100S 3R9 5% Screw Terminal Resistance Value: 3.9 Ω Element Type: Wire Wound Passive Component Tolerance: 5 % Resistor Type: Power Resistor Resistance Class: Up to 1kΩ Power Resistors: Aluminium Housed & Hsc | 3.9 Ω Wire Wound 5 % Power Resistor | Part Number: HSC100S3R9J | Internal Number: 2-2176731-3 | TE Connectivity
RoHS : Compliant

10 : $45.43
1 : $50.48

HSC100S39RJ

TE Connectivity

HSC100S 39R 5% Screw Terminal Resistance Value: 39 Ω Element Type: Wire Wound Passive Component Tolerance: 5 % Resistor Type: Power Resistor Resistance Class: Up to 1kΩ Power Resistors: Aluminium Housed & Hsc | 39 Ω Wire Wound 5 % Power Resistor | Part Number: HSC100S39RJ | Internal Number: 3-2176731-5 | TE Connectivity
RoHS : Compliant

10 : $45.43
1 : $50.48

HSC100200RJ

TE Connectivity

HSC100 200R 5% Resistance Value: 200 Ω Element Type: Wire Wound Passive Component Tolerance: 5 % Resistor Type: Power Resistor Resistance Class: Up to 1kΩ Chassis Mount Resistor | 200 Ω Wire Wound 5 % Power Resistor | Part Number: HSC100200RJ | Internal Number: 6-1625999-5 | TE Connectivity
RoHS : Compliant

10 : $23.59
1 : $26.21

HSC100R68J

TE Connectivity

HSC100 R68 5% Resistance Value: .68 Ω Element Type: Wire Wound Passive Component Tolerance: 5 % Resistor Type: Power Resistor Resistance Class: Up to 1kΩ 0.68 Ω Wire Wound 5 % Power Resistor | Chassis Mount Resistor | Part Number: HSC100R68J | Internal Number: 7-1625999-8 | TE Connectivity
RoHS : Compliant

10 : $24.53
1 : $27.25

HSC100S33KJ

TE Connectivity

HSC100S 33K 5% Screw Terminal Resistance Value: 33K Ω Element Type: Wire Wound Passive Component Tolerance: 5 % Resistor Type: Power Resistor Resistance Class: 1kΩ – 1MΩ Power Resistors: Aluminium Housed & Hsc | 33K Ω Wire Wound 5 % Power Resistor | Part Number: HSC100S33KJ | Internal Number: 7-2176731-0 | TE Connectivity
RoHS : Compliant

10 : $45.43
1 : $50.48

HSC100S56RJ

TE Connectivity

HSC100S 56R 5% Screw Terminal Resistance Value: 56 Ω Element Type: Wire Wound Passive Component Tolerance: 5 % Resistor Type: Power Resistor Resistance Class: Up to 1kΩ Power Resistors: Aluminium Housed & Hsc | 56 Ω Wire Wound 5 % Power Resistor | Part Number: HSC100S56RJ | Internal Number: 3-2176731-7 | TE Connectivity
RoHS : Compliant

10 : $45.43
1 : $50.48

C10-R22M-R Distributor

Link URL