 |
Electronic Components Datasheet Search |
|
|
Electronic Components Datasheet Search |
|
C574G-S20-R Distributor |
| Distributor | Part # | Manufacturer | Description | Price | Qty. BuyNow | |
 Master Electronics | MC74HC574ADWR2G | onsemi | A high-performance silicon-gate CMOS octal D-type flip-flop with 3-state noninverting outputs. RoHS : Compliant |
| 2,000 | |
| MC74HC574ADWG | onsemi | Octal 3-State Non-inverting D Flip-Flop RoHS : Compliant |
| 1,824 | ||
| MC74HC574ADWR2G-Q | onsemi | OCTAL D-TYPE 3-STATE FF RoHS : Compliant |
| 0 | ||
| 74VHC574MTC | onsemi | Octal D-Type Flip-Flop with 3-STATE Outputs RoHS : Compliant |
| 0 | ||
| MC74VHC574DWG | onsemi | Octal D Flip-Flop with 3-State Outputs RoHS : Compliant |
| 0 | ||
| MM74HC574MTCX | onsemi | 3-STATE Octal D-Type Edge-Triggered Flip-Flop RoHS : Compliant |
| 0 | ||
| AAC5747-00 | TE Connectivity | 100P2315-3B-15-07-L40-CHP MOQ Reduction RoHS : Compliant |
| 0 | ||
| SC574-30 | Hammond Manufacturing | M4 X 30MM SS SCREW -30 Pack RoHS : Compliant |
| 0 | ||
| MC74VHC574DWR2G | onsemi | Octal D Flip-Flop with 3-State Outputs RoHS : Compliant |
| 0 | ||
MC74VHC574DTR2G | onsemi | Octal D Flip-Flop with 3-State Outputs RoHS : Compliant |
| 0 | ||
 Avnet Americas | 74HC574D,653 | Nexperia | - Tape and Reel (Alt: 74HC574D,653) RoHS : Compliant |
| 14,000 | |
| 74VHC574FT | Toshiba America Electronic Components | - Tape and Reel (Alt: 74VHC574FT) RoHS : Compliant |
| 10,000 | ||
| SMC5.7473J50J33TR12 | KEMET Corporation | General Purpose Film Capacitor, Metallized PPS, 2220 [5650 Metric], 0.047 uF, ? 5%, 30 V, 50 V - Tape and Reel (Alt: SMC5.7473J50J33TR12) RoHS : Compliant |
| 9,600 | ||
| MC74HC574ADWG | onsemi | Flip-Flop, Tri State Non Inverted, Positive Edge, 74HC574, D, 32 ns, 35 MHz, 7.8 mA, WSOIC - Rail/Tube (Alt: MC74HC574ADWG) RoHS : Compliant |
| 9,038 | ||
74LVC574APW,118 | Nexperia | - Tape and Reel (Alt: 74LVC574APW,118) RoHS : Compliant |
| 7,500 | ||
| 74AHC574PW,118 | Nexperia | Flip-Flop, Tri State Non Inverted, Positive Edge, 74AHC574, D, 115 MHz, 25 mA, TSSOP - Tape and Reel (Alt: 74AHC574PW,118) RoHS : Compliant |
| 7,500 | ||
| 74HC574PW,118 | Nexperia | - Tape and Reel (Alt: 74HC574PW,118) RoHS : Compliant |
| 5,000 | ||
| 74LVC574AD,118 | Nexperia | - Tape and Reel (Alt: 74LVC574AD,118) RoHS : Compliant |
| 4,000 | ||
| SPC5748GBK0AVMJ6 | NXP Semiconductors | - Trays (Alt: SPC5748GBK0AVMJ6) RoHS : Compliant |
| 450 | ||
| SPC5746CSK1AMKU6 | NXP Semiconductors | - Trays (Alt: SPC5746CSK1AMKU6) RoHS : Compliant |
| 160 | ||
| EC5745ETTTS-14.7456M TR | Abracon Corporation | - Tape and Reel (Alt: EC5745ETTTS-14.7456M TR) RoHS : Compliant | 0 | |||
| EC5745ETTTS-27.000M TR | Abracon Corporation | - Tape and Reel (Alt: EC5745ETTTS-27.000M TR) RoHS : Compliant | 0 | |||
| EC5745TTS-24.000M TR | Abracon Corporation | - Tape and Reel (Alt: EC5745TTS-24.000M TR) RoHS : Compliant | 0 | |||
| SPC5744BFK1AVKU2 | NXP Semiconductors | MCU 32-Bit e200z4 RISC 1.5MB Flash 3.3V/5V 176-Pin LQFP EP Tray - Trays (Alt: SPC5744BFK1AVKU2) RoHS : Compliant |
| 0 | ||
| SPC5745BK1MMH6 | NXP Semiconductors | - Trays (Alt: SPC5745BK1MMH6) RoHS : Compliant |
| 0 | ||
 Newark | 74AHC574PW,118 | Nexperia | Flip-Flop, D-Type, 115Mhz, Tssop-20; |Nexperia 74AHC574PW,118 RoHS : Compliant |
| 1,738 | |
| 74ALVC574D,118 | Nexperia | Flip Flop, D, -40 To 85Deg C; |Nexperia 74ALVC574D,118 RoHS : Compliant |
| 1,232 | ||
| 74ALVC574D,118 | Nexperia | Flip Flop, D, -40 To 85Deg C; |Nexperia 74ALVC574D,118 RoHS : Compliant |
| 1,232 | ||
| MC74HC574ADWG | onsemi | Flip-Flop, D-Type, Octal, 32Ns, Wsoic-20; |Onsemi MC74HC574ADWG RoHS : Compliant |
| 1,148 | ||
| 74LVC574AD,118 | Nexperia | Level Shifters; |Nexperia 74LVC574AD,118 RoHS : Compliant |
| 696 | ||
| 74LVC574AD,118 | Nexperia | Level Shifters; |Nexperia 74LVC574AD,118 RoHS : Compliant |
| 696 | ||
SN74AC574N | Texas Instruments | Ic, Flip Flop; |Texas Instruments SN74AC574N RoHS : Compliant |
| 556 | ||
| DEVKIT-MPC5744P | NXP Semiconductors | Dev Kit, 32Bit, Power Architecture E200; |NXP Semiconductors DEVKIT-MPC5744P RoHS : Compliant |
| 73 | ||
| MC74AC574DWG | onsemi | D Flip Flop, Octal, Soic-20; |Onsemi MC74AC574DWG RoHS : Compliant |
| 54 | ||
| 74HC574PW,118 | Nexperia | Flip-Flop, D-Type, 123Mhz, Tssop-20; |Nexperia 74HC574PW,118 RoHS : Compliant |
| 36 | ||
| 74HC574PW,118 | Nexperia | Flip-Flop, D-Type, 123Mhz, Tssop-20; |Nexperia 74HC574PW,118 RoHS : Compliant |
| 36 | ||
| SPC574S-DISP | STMicroelectronics | Discovery Brd, E200Z4D, Pwr Architecture; |Stmicroelectronics SPC574S-DISP RoHS : Compliant |
| 3 | ||
| MPC5748G-LCEVB | NXP Semiconductors | Evaluation Board, Mpc5748G 32Bit Mcu; |NXP Semiconductors MPC5748G-LCEVB RoHS : Compliant |
| 3 | ||
| DEVKIT-MPC5748G | NXP Semiconductors | Dev Board, 32Bit, Power Arch E200Z4; |NXP Semiconductors DEVKIT-MPC5748G RoHS : Compliant |
| 3 | ||
| MPC574XG-MB | NXP Semiconductors | Motherboard, E200Z4, Power Architecture; |NXP Semiconductors MPC574XG-MB RoHS : Compliant |
| 2 | ||
 Analog Devices Inc | HMC574AMS8E | Analog Devices Inc | 5 Watt SPDT T/R Switch SMT, DC RoHS : Compliant |
| 1,001 | |
| HMC574AMS8ETR | Analog Devices Inc | 5 Watt SPDT T/R Switch SMT, DC RoHS : Compliant |
| 101 | ||
| EV1HMC574AMS8 | Analog Devices Inc | EVALUATION PCB ASSEMBLY RoHS : Compliant |
| 26 | ||
 RS | MC74AC574DWG | onsemi | CMOS, OCTAL D-TYPE, 3-STATE OUTPUT, 20-PIN SOIC RoHS : Compliant |
| 0 | |
EC5745TS-4.000M | Ecliptek Corporation | STANDARD CLOCK OSCILLATOR 4.000MHZ SMD 2.0MM X 2.5MM 50PPM -10°C TO +70°C RoHS : Compliant |
| 0 | ||
| EC5745TS-20.000M | Ecliptek Corporation | STANDARD CLOCK OSCILLATOR 20.000MHZ SMD 2.0MM X 2.5MM 50PPM -10°C TO +70°C RoHS : Compliant |
| 0 | ||
| EC5745TS-30.000M | Ecliptek Corporation | STANDARD CLOCK OSCILLATOR 30.000MHZ SMD 2.0MM X 2.5MM 50PPM -10°C TO +70°C RoHS : Compliant |
| 0 | ||
| EC5745TTS-20.000M | Ecliptek Corporation | STANDARD CLOCK OSCILLATOR 20.000MHZ SMD 2.0MM X 2.5MM 50PPM -10°C TO +70°C RoHS : Compliant |
| 0 | ||
| EC5745TTS-24.000M | Ecliptek Corporation | STANDARD CLOCK OSCILLATOR 24.000MHZ SMD 2.0MM X 2.5MM 50PPM -10°C TO +70°C RoHS : Compliant |
| 0 | ||
| EC5745TS-29.4912M | Ecliptek Corporation | STANDARD CLOCK OSCILLATOR 29.4912MHZ SMD 2.0MM X 2.5MM 50PPM -10°C TO +70°C RoHS : Compliant |
| 0 | ||
| EC5745ETTS-25.000M | Ecliptek Corporation | STANDARD CLOCK OSCILLATOR 25.000MHZ SMD 2.0MM X 2.5MM 50PPM -40°C TO +85°C RoHS : Compliant |
| 0 | ||
| EC5745ETTS-12.288M | Ecliptek Corporation | STANDARD CLOCK OSCILLATOR 12.288MHZ SMD 2.0MM X 2.5MM 50PPM -40°C TO +85°C RoHS : Compliant |
| 0 | ||
| EC5745ETTTS-12.000M | Ecliptek Corporation | STANDARD CLOCK OSCILLATOR 12.000MHZ SMD 2.0MM X 2.5MM 50PPM -40°C TO +85°C RoHS : Compliant |
| 0 | ||
| EC5745ETTTS-16.000M | Ecliptek Corporation | STANDARD CLOCK OSCILLATOR 16.000MHZ SMD 2.0MM X 2.5MM 50PPM -40°C TO +85°C RoHS : Compliant |
| 0 | ||
| EC5745ETTTS-25.000M | Ecliptek Corporation | STANDARD CLOCK OSCILLATOR 25.000MHZ SMD 2.0MM X 2.5MM 50PPM -40°C TO +85°C RoHS : Compliant |
| 0 | ||
| EC5745TTS-24.000M TR | Ecliptek Corporation | STANDARD CLOCK OSCILLATOR 24.000MHZ SMD 2.0MM X 2.5MM 50PPM -10°C TO +70°C |
| 0 | ||
| EC5745ETTTS-27.000M TR | Ecliptek Corporation | STANDARD CLOCK OSCILLATOR 27.000MHZ SMD 2.0MM X 2.5MM 50PPM -40°C TO +85°C |
| 0 | ||
| EC5745ETTTS-14.7456M TR | Ecliptek Corporation | STANDARD CLOCK OSCILLATOR 14.7456MHZ SMD 2.0MM X 2.5MM 50PPM -40°C TO +85°C |
| 0 | ||
 STMicroelectronics | SPC574S64E3CEFAR | STMicroelectronics | 32-bit Power Architecture MCU for Automotive Chassis and Safety Applications RoHS : Compliant |
| 722 | |
| SPC574K72E5C6FAY | STMicroelectronics | 32-bit Power Architecture MCU for Automotive Applications RoHS : Compliant |
| 628 | ||
| SPC574K-DISP | STMicroelectronics | Discovery Kit for SPC574 K line - with SPC574K72E5 MCU |
| 4 | ||
| SPC574S-DISP | STMicroelectronics | Discovery Kit for SPC574 S line |
| 4 | ||
| SPC574SADPT144S | STMicroelectronics | Socketed mini module for SPC574Sx in QFP144 package |
| 0 | ||
| SPC574K72E7C6FAR | STMicroelectronics | 32-bit Power Architecture MCU for Automotive Applications RoHS : Compliant |
| 0 | ||
| SPC574K72E7C6FAY | STMicroelectronics | 32-bit Power Architecture MCU for Automotive Applications RoHS : Compliant |
| 0 | ||
| SPC574SADPT244S | STMicroelectronics | Socketed mini module for SPC574Sx in BGA244 package |
| 0 | ||
| SPC574KADPT144S | STMicroelectronics | Socketed mini module for SPC574Kx in eLQFP144 package |
| 0 | ||
 Rochester Electronics | 74LVC574APW/S400,118 | NXP Semiconductors | Bus Driver, LVC/LCX/Z Series, 1-Func, 8-Bit, True Output, CMOS, TSSOP20 RoHS : Not Compliant |
| 13,023 | |
| SPC5745BK1MMH6 | NXP Semiconductors | IC MCU e200z4 32Bit 1 Core FLASH 2MB (2M x 8) 160MHz 100-BGA Tray RoHS : Compliant |
| 6,332 | ||
| SPC5747GK1CKU2 | NXP Semiconductors | IC MCU e200z2, e200z4 32Bit 5 Core FLASH 4MB (4M x 8) 80MHz, 120MHz 176-QFP Tray RoHS : Compliant |
| 1,000 | ||
74LVC574AD,112 | NXP Semiconductors | Flip Flop Positive Edge 1 Element 1.5V, 1.8V, 2.5V, 3.3V 20-SOIC RoHS : Compliant |
| 29,301 | ||
| SPC5741PK1AKLQ8 | NXP Semiconductors | MPC5741P - 1MB NVM, 2 x e200Z4 cores RoHS : Compliant |
| 300 | ||
| SPC5743RK1MLQ5R | NXP Semiconductors | IC MCU e200z4 32Bit 3 Core FLASH 2MB (2M x 8) 200MHz 144-QFP T/R RoHS : Compliant |
| 500 | ||
| 74LVC574AD,112 | Nexperia | Flip Flop Positive Edge 1 Element 1.5V, 1.8V, 2.5V, 3.3V 20-SOIC RoHS : Compliant |
| 55,489 | ||
| 74AHC574D,112 | Nexperia | Flip Flop Positive Edge 1 Element 2.5V, 3.3V, 5V 20-SOIC Bulk RoHS : Compliant |
| 3,319 | ||
| MC74HC574ADWR2G | onsemi | Flip Flop Positive Edge 1 Element 2.5V, 3.3V, 5V 20-SOIC T/R RoHS : Compliant |
| 53 | ||
CLVC574AQPWRG4Q1 | Texas Instruments | Flip Flop Positive Edge 1 Element 2.5V, 3.3V 20-SOP T/R RoHS : Compliant |
| 29,345 | ||
| SN74LVC574PWLE | Texas Instruments | Flip Flop Positive Edge 1 Element 3.3V 20-SOP Rail RoHS : Not Compliant |
| 1,000 | ||
| 74AC574SC | Fairchild Semiconductor Corporation | Flip Flop Positive Edge 1 Element 2.5V, 3.3V, 5V 20-SOIC Tube RoHS : Compliant |
| 27 | ||
| CD74AC574EX | Harris Semiconductor | Flip Flop Positive Edge 1 Element 1.8V, 2.5V, 3.3V, 5V 20-DIP Tube RoHS : Compliant |
| 1,857 | ||
| CD74AC574M | Harris Semiconductor | Bus Driver, AC Series, 1-Func, 8-Bit, True Output, CMOS, PDSO20 RoHS : Compliant |
| 25 | ||
| JM54AC574SRA-RH | National Semiconductor Corporation | 54AC574 - Octal D-Type Flip-Flop with TRI-STATE Outputs - (SMD - JM38510R75604SRA) - SPACE-LEVEL LOGIC RoHS : Not Compliant |
| 445 | ||
 Sager | AAC5743-00 | TE Connectivity | TE Connectivity 100P2315-3B-09-03-L30-CHP | 0 | ||
| AAC5747-00 | TE Connectivity | TE Connectivity 100P2315-3B-15-07-L40-CHP | 0 | |||
| AAC5746-00 | TE Connectivity | TE Connectivity 100P2315-3B-15-05-L40-CHP | 0 | |||
 TME | TC74VHC574FK(EL,K).JPG) | Toshiba America Electronic Components | IC: digital; D flip-flop; CMOS; SMD; VSSOP20; VHC; OUT: 3-state; 40uA RoHS : Compliant |
| 2,091 | |
CD74AC574M96 | Texas Instruments | IC: digital; D flip-flop; Ch: 8; CMOS; SMD; SO20-W; AC; OUT: 3-state RoHS : Compliant |
| 2,000 | ||
SN74AHC574PWR | Texas Instruments | IC: digital; D flip-flop; Ch: 8; CMOS; SMD; TSSOP20; AHC; OUT: 3-state RoHS : Compliant |
| 1,616 | ||
| SN74AHC574DW | Texas Instruments | IC: digital; D flip-flop; Ch: 8; CMOS; SMD; SO20; AHC; OUT: 3-state RoHS : Compliant |
| 0 | ||
| SN74AHC574NSR | Texas Instruments | IC: digital; non-inverting,D flip-flop; Ch: 8; IN: 8; CMOS; SMD; AHC RoHS : Compliant |
| 0 | ||
SN74LVC574AQPWREP | Texas Instruments | IC: digital; non-inverting,D flip-flop; Ch: 8; IN: 8; CMOS,TTL; LVC RoHS : Compliant |
| 0 | ||
| SN74AHC574PW | Texas Instruments | IC: digital; D flip-flop; Ch: 8; CMOS; SMD; TSSOP20; AHC; OUT: 3-state RoHS : Compliant |
| 0 | ||
SN74HC574NSR | Texas Instruments | IC: digital; D flip-flop; Ch: 8; CMOS; SMD; SOP20; HC; OUT: 3-state RoHS : Compliant |
| 0 | ||
| SN74AC574PW | Texas Instruments | IC: digital; D flip-flop; Ch: 8; CMOS; SMD; TSSOP20; AC; OUT: 3-state RoHS : Compliant |
| 0 | ||
SN74LVC574ARGYR | Texas Instruments | IC: digital; non-inverting,D flip-flop; Ch: 8; IN: 8; CMOS,TTL; LVC RoHS : Compliant |
| 0 | ||
| 74VHC574MTC | onsemi | IC: digital; D flip-flop; Ch: 8; CMOS; VHC; SMD; TSSOP20; OUT: 3-state RoHS : Compliant |
| 0 | ||
| 74ALVC574PW,118 | Nexperia | IC: digital; D flip-flop; Ch: 8; SMD; TSSOP20; ALVC; OUT: 3-state RoHS : Compliant |
| 0 | ||
CD74HC574M96 | Texas Instruments | IC: digital; D flip-flop; Ch: 8; CMOS; SMD; SO20; HC; OUT: 3-state RoHS : Compliant |
| 0 | ||
| SN74AC574DBR | Texas Instruments | IC: digital; non-inverting,D flip-flop; Ch: 8; IN: 8; CMOS; SMD; AC RoHS : Compliant |
| 0 | ||
| MC74AC574DTR2G | onsemi | IC: digital; 3-state,octal,D flip-flop; Ch: 8; CMOS; AC; SMD; AC RoHS : Compliant |
| 0 | ||
 Ameya Holding Limited | TLC6C5748QDCARQ1 | Texas Instruments | RoHS : Compliant | 150,000 | ||
| SN74LVC574ADBR | Texas Instruments | IC D-TYPE POS TRG SNGL 20SSOP RoHS : Compliant | 56,860 | |||
| SN74LVC574ARGYR | Texas Instruments | IC D-TYPE POS TRG SNGL 20QFN RoHS : Compliant | 44,653 | |||
| SN74LVC574ADWR | Texas Instruments | IC D-TYPE POS TRG SNGL 20SOIC RoHS : Compliant | 32,370 | |||
| SN74LVC574ANSR | Texas Instruments | OCTAL D-TYPE FLIP-FLOP WITH 3-STATE OUTPUTS RoHS : Compliant | 23,410 | |||
| SPC5746BHK1AMKU6 | NXP Semiconductors | IC MCU 32BIT 3MB FLASH 176LQFP RoHS : Compliant | 10,492 | |||
| SN74HC574PWR | Texas Instruments | RoHS : Compliant | 4,000 | |||
| SN74AHC574PWR | Texas Instruments | RoHS : Compliant | 2,000 | |||
| CD74HC574M | Texas Instruments | RoHS : Compliant | 1,000 | |||
| 74HC574D | NXP Semiconductors | IC FF D-TYPE SNGL 8BIT 20SOIC RoHS : Compliant | 700 | |||
 ComSIT USA | 74LVC574APW | NXP Semiconductors | OCTAL D-TYPE FLIP-FLOP WITH 5-VOLT TOLERANT INPUT/OUTPUT; POSITIVE EDGE-TRIGGER (3-STATE) Bus Driver, LVC/LCX/Z Series, 1-Func, 8-Bit, True Output, CMOS, PDSO20 RoHS : Compliant | 5,755 | ||
| 74HC574D | NXP Semiconductors | OCTAL D-TYPE FLIP-FLOP; POSITIVE EDGE-TRIGGER; 3-STATE Bus Driver, HC/UH Series, 1-Func, 8-Bit, True Output, CMOS, PDSO20 RoHS : Compliant | 4,255 | |||
| 74VHC574MTC | Fairchild Semiconductor Corporation | Flip Flop Positive Edge 1 Element 2.5V, 3.3V, 5V 20-SOP Tube RoHS : Compliant | 3,504 | |||
| MPC5745C-SC667500MMHR | NXP Semiconductors | Electronic Component RoHS : Compliant | 3,000 | |||
| 74HC574PW | Philips Semiconductors | OCTAL D-TYPE FLIP-FLOP; POSITIVE EDGE-TRIGGER; 3-STATE Bus Driver, HC/UH Series, 1-Func, 8-Bit, True Output, CMOS, PDSO20 RoHS : Not Compliant | 2,569 | |||
| 74LVC574AD | Philips Semiconductors | OCTAL D-TYPE FLIP-FLOP WITH 5-VOLT TOLERANT INPUT/OUTPUT; POSITIVE EDGE-TRIGGER (3-STATE) Bus Driver, LVC/LCX/Z Series, 1-Func, 8-Bit, True Output, CMOS, PDSO20 RoHS : Not Compliant | 1,800 | |||
| 74LVC574ADB | Philips Semiconductors | OCTAL D-TYPE FLIP-FLOP WITH 5-VOLT TOLERANT INPUT/OUTPUT; POSITIVE EDGE-TRIGGER (3-STATE) Bus Driver, LVC/LCX/Z Series, 1-Func, 8-Bit, True Output, CMOS, PDSO20 RoHS : Not Compliant | 1,735 | |||
| 74LVC574ADWR | Texas Instruments | OCTAL EDGE-TRIGGERED D-TYPE FLIP-FLOP WITH 3-STATE OUTPUTS Bus Driver, LVC/LCX/Z Series, 1-Func, 8-Bit, True Output, CMOS, PDSO20 RoHS : Compliant | 1,605 | |||
| 74LVC574APWR | Texas Instruments | OCTAL EDGE-TRIGGERED D-TYPE FLIP-FLOP WITH 3-STATE OUTPUTS Bus Driver, LVC/LCX/Z Series, 1-Func, 8-Bit, True Output, CMOS, PDSO20 RoHS : Not Compliant | 1,560 | |||
| 74HC574M1R | STMicroelectronics | Flip Flop Positive Edge 1 Element 2.5V, 3.3V, 5V 20-SOIC Tube RoHS : Not Compliant | 1,405 | |||
| 74LVC574ADW | Texas Instruments | OCTAL EDGE-TRIGGERED D-TYPE FLIP-FLOP WITH 3-STATE OUTPUTS Bus Driver, LVC/LCX/Z Series, 1-Func, 8-Bit, True Output, CMOS, PDSO20 RoHS : Compliant | 700 | |||
74HC574DB | NXP Semiconductors | OCTAL D-TYPE FLIP-FLOP; POSITIVE EDGE-TRIGGER; 3-STATE Bus Driver, HC/UH Series, 1-Func, 8-Bit, True Output, CMOS, PDSO20 RoHS : Compliant | 190 | |||
| PC74HC574T | Philips E C G Inc | D Flip-Flop, 8-Func, Positive Edge Triggered, CMOS, PDSO20 RoHS : Not Compliant | 152 | |||
| 74HC574N | Texas Instruments | OCTAL EDGE-TRIGGERED D-TYPE FLIP-FLOP WITH 3-STATE OUTPUT Bus Driver, HC Series, 1-Func, 8-Bit, True Output, CMOS, PDIP20 RoHS : Compliant | 50 | |||
| 74HC574WM | Fairchild Semiconductor Corporation | Flip Flop Positive Edge 1 Element 2.5V, 3.3V, 5V 20-SOIC Tube RoHS : Not Compliant | 35 | |||
 Interstate Connecting Components | C57494000 | BURNDY |
| 134 | ||
| C574393001 | TE Connectivity | Cross Referenced to TE CNTY RAYCHEM - Part: RYCFLT0111-0.25-3 | 0 | |||
 NexGen Digital | SN74AHC574PWR | Texas Instruments | RoHS : Compliant | 383 | ||
| 74HC574D | Philips E C G Inc | 52 | ||||
| MC74HC574ADW | Motorola Semiconductor Products | RoHS : Not Compliant | 24 | |||
74AC574B | STMicroelectronics | RoHS : Compliant | 9 | |||
 Powell Electronics | SC574-30 | Hammond Manufacturing | M4 X 30MM SS SCREW -30 Pack |
| 3 | |
 Richardson RFPD | HMC574AMS8E | Analog Devices Inc | RF Switch SPDT 0MHz to 3GHz 16dB 8-Pin MSOP T/R RoHS : Compliant |
| 48 | |
| EV1HMC574AMS8 | Analog Devices Inc | HMC574A RF Switch Evaluation Board RoHS : Compliant |
| 0 | ||
| 104124-HMC574MS8 | Analog Devices Inc | Evaluation Board For Spdt Switch RoHS : Compliant | 0 | |||
| HMC574AMS8 | Analog Devices Inc | RF Switch SPDT 0MHz to 3GHz 16dB Automotive 8-Pin | 0 | |||
| HMC574AMS8TR | Analog Devices Inc | RF Switch SPDT 0MHz to 3GHz 16dB 8-Pin MSOP T/R | 0 | |||
| HMC574AMS8ETR | Analog Devices Inc | RF Switch SPDT 0MHz to 3GHz 16dB 8-Pin MSOP T/R RoHS : Compliant |
| 0 | ||
 Chip 1 Exchange | SPC5742PK1AMLQ8 | NXP Semiconductors | INSTOCK RoHS : Compliant | 94,000 | ||
| 74LVC574APW | INSTOCK | 5,888 | ||||
| 74LVC574APW,118 (935219050118) | Nexperia | INSTOCK | 4,585 | |||
| SN74LVC574ADBR | INSTOCK | 2,908 | ||||
| 74HC574PW | NXP Semiconductors | INSTOCK RoHS : Compliant | 2,500 | |||
| 74LVC574ADB | INSTOCK | 2,215 | ||||
| 74AC574PC | Fairchild Semiconductor Corporation | INSTOCK RoHS : Compliant | 1,170 | |||
| HMC574MS8E | INSTOCK | 275 | ||||
| 74HC574N | Philips Semiconductors | INSTOCK RoHS : Compliant | 162 | |||
| 74HC574PW | Nexperia | INSTOCK RoHS : Compliant | 146 | |||
| 74HC574D | NXP Semiconductors | INSTOCK RoHS : Compliant | 114 | |||
| 74HC574D | Philips Semiconductors | INSTOCK RoHS : Compliant | 99 | |||
| PC74HC574T | INSTOCK | 47 | ||||
| MM74HC574N | PNEER | INSTOCK | 25 | |||
| 74HC574D | INSTOCK | 20 | ||||
 Avnet Abacus | AAC5746-00 | TE Connectivity | (Alt: AAC5746-00) | 0 | ||
| EC5740-000 | TE Connectivity | (Alt: EC5740-000) RoHS : Compliant | 0 | |||
| SMC5.7473H50J33TR12 | KEMET Corporation | General Purpose Film Capacitor Metallized PPS 2220 5650 Metric 0047 uF 25 30 V 50 V (Alt: SMC5.7473H50J33TR12) RoHS : Compliant | 0 | |||
| GMC5.7473J50J31TR12 | KEMET Corporation | General Purpose Film Capacitor Metallized PEN 2220 5650 Metric 0047 uF 5 30 V 50 V - Tape and Reel (Alt: GMC5.7473J50J31TR12) RoHS : Compliant | 0 | |||
| SMC5.7473J50J33TR12 | KEMET Corporation | General Purpose Film Capacitor Metallized PPS 2220 5650 Metric 0047 uF 5 30 V 50 V - Tape and Reel (Alt: SMC5.7473J50J33TR12) RoHS : Compliant | 0 | |||
Avnet Asia | MC74HC574ADWR2G | onsemi | Flip-Flop, D, 32 ns, 35 MHz, 7.8 mA, SOIC (Alt: MC74HC574ADWR2G) RoHS : Compliant | 0 | ||
| MC74AC574DTR2G | onsemi | Octal D Flip-Flop with 3-State Outputs. (Alt: MC74AC574DTR2G) RoHS : Compliant | 0 | |||
| 74HC574D-Q100,118 | Nexperia | Flip Flop, 74HC574, D, 26 ns, 133 MHz, 7.8 mA, 20 Pins, SOIC (Alt: 74HC574D-Q100,118) RoHS : Compliant | 0 | |||
| 74ALVC574PW,118 | Nexperia | Flip Flop, 74ALVC574, D, 4.1 ns, 300 MHz, 24 mA, 20 Pins, TSSOP (Alt: 74ALVC574PW,118) RoHS : Compliant | 0 | |||
| 74LVC574APW,118 | Nexperia | (Alt: 74LVC574APW,118) RoHS : Compliant | 0 | |||
| 74LVC574AD,118 | Nexperia | (Alt: 74LVC574AD,118) RoHS : Compliant | 0 | |||
| 74LVC574AT20-13 | Diodes Incorporated | (Alt: 74LVC574AT20-13) RoHS : Compliant | 0 | |||
| 74HC574D,653 | Nexperia | (Alt: 74HC574D,653) RoHS : Compliant |
| 0 | ||
| MC74VHC574DTG | onsemi | (Alt: MC74VHC574DTG) RoHS : Compliant | 0 | |||
| 74HC574PW,118 | Nexperia | (Alt: 74HC574PW,118) RoHS : Compliant |
| 0 | ||
| MM74HC574MTCX | onsemi | 3-STATE Octal D-Type Edge-Triggered Flip-Flop. (Alt: MM74HC574MTCX) RoHS : Compliant |
| 0 | ||
 Avnet Silica | 74HC574PW,118 | Nexperia | Flip Flop 74HC574 D 26 ns 133 MHz 78 mA 20 Pins TSSOP (Alt: 74HC574PW,118) RoHS : Compliant | 105,000 | ||
| 74HC574D,653 | Nexperia | FlipFlop Tri State Non Inverted Positive Edge 74HC574 D 14 ns 133 MHz 78 mA SOIC (Alt: 74HC574D,653) RoHS : Compliant | 68,000 | |||
| MC74HC574ADTR2G | onsemi | Octal 3State Noninverting D FlipFlop ONSSPCLGC (Alt: MC74HC574ADTR2G) RoHS : Compliant | 47,500 | |||
| MC74HC574ADWR2G | onsemi | FlipFlop D 32 ns 35 MHz 78 mA SOIC (Alt: MC74HC574ADWR2G) RoHS : Compliant | 27,000 | |||
| 74LVC574APW,118 | Nexperia | FlipFlop Tri State Positive Edge 74LVC574 D 200 MHz TSSOP (Alt: 74LVC574APW,118) RoHS : Compliant | 5,000 | |||
| MM74HC574MTC | onsemi | 3STATE Octal DType EdgeTriggered FlipFlop ONSSPCLGC (Alt: MM74HC574MTC) RoHS : Compliant | 2,700 | |||
| MC74HC574ADWG | onsemi | FlipFlop Tri State Non Inverted Positive Edge 74HC574 D 32 ns 35 MHz 78 mA WSOIC (Alt: MC74HC574ADWG) RoHS : Compliant | 2,508 | |||
| MC74VHC574DWG | onsemi | Octal D FlipFlop with 3State Outputs ONSSPCLGC (Alt: MC74VHC574DWG) RoHS : Compliant | 2,014 | |||
SPC5744PGK1AMMM9 | NXP Semiconductors | 32 Bit Microcontroller MPC5 Family MPC57xx Series Microcontrollers Power Architecture 32 bit (Alt: SPC5744PGK1AMMM9) RoHS : Compliant | 304 | |||
| SPC5748GBK0AVKU6 | NXP Semiconductors | MCU 32Bit MPC5748G e200z4 RISC 6MB Flash 33V 176Pin HLQFP Tray (Alt: SPC5748GBK0AVKU6) RoHS : Compliant | 80 | |||
SPC5744PFK1AMLQ9 | NXP Semiconductors | 32bit MCU PowerPC e200Z4 200 MHz 25 MB 384 KB 144 Pins LQFP (Alt: SPC5744PFK1AMLQ9) RoHS : Compliant | 60 | |||
| MC74AC574DWG | onsemi | Octal D FlipFlop with 3State Outputs ONSSPCLGC (Alt: MC74AC574DWG) RoHS : Compliant | 0 | |||
| 74AHC574D,118 | Nexperia | Flip Flop 74AHC574 D 106 ns 180 MHz 8 mA 20 Pins SOIC (Alt: 74AHC574D,118) RoHS : Compliant | 0 | |||
| SPC5745BK1MMH6 | NXP Semiconductors | 32bit MCU e200z4 160 MHz 2 MB 256 KB 100 Pins MAPBGA (Alt: SPC5745BK1MMH6) RoHS : Compliant | 0 | |||
| SPC5744BFK1AVKU2 | NXP Semiconductors | MCU 32Bit e200z4 RISC 15MB Flash 33V5V 176Pin LQFP EP Tray (Alt: SPC5744BFK1AVKU2) RoHS : Compliant | 0 | |||
 Component Electronics, Inc | SMC5.7473J50J33TR12 | Evox Rifa / KEMET | IN STOCK SHIP TODAY |
| 2,362 | |
| 74LVC574AQ8 | Integrated Device Technology Inc | IN STOCK SHIP TODAY RoHS : Not Compliant |
| 1,928 | ||
| M74HC574RM13TR | STMicroelectronics | IN STOCK SHIP TODAY RoHS : Compliant |
| 820 | ||
| MM74HC574N | National Semiconductor Corporation | IN STOCK SHIP TODAY RoHS : Not Compliant | 480 | |||
| 74HC574N | Philips Semiconductors | IN STOCK SHIP TODAY RoHS : Compliant |
| 392 | ||
| MC74HC574ADW | Motorola Semiconductor Products | IN STOCK SHIP TODAY RoHS : Not Compliant |
| 229 | ||
| MM74HC574N | Fairchild Semiconductor Corporation | IN STOCK SHIP TODAY RoHS : Compliant |
| 75 | ||
| MC74HC574ADW | onsemi | IN STOCK SHIP TODAY RoHS : Not Compliant |
| 62 | ||
| 74HC574D | Philips Semiconductors | IN STOCK SHIP TODAY RoHS : Compliant |
| 60 | ||
| TC74HC574AF | Toshiba America Electronic Components | IN STOCK SHIP TODAY RoHS : Compliant | 48 | |||
| MC74HC574ADWG | onsemi | IN STOCK SHIP TODAY RoHS : Compliant |
| 25 | ||
| M74HC574M1R | SGS Semiconductor Ltd | IN STOCK SHIP TODAY |
| 21 | ||
| 74HC574D | NXP Semiconductors | IN STOCK SHIP TODAY RoHS : Compliant |
| 18 | ||
| MC74HC574ADWR | onsemi | IN STOCK SHIP TODAY |
| 9 | ||
| VC5744-3 | Wiremold | IN STOCK SHIP TODAY |
| 1 | ||
 EBV Elektronik | SPC5748GGK1VMJ6R | NXP Semiconductors | MCU 32Bit MPC5748G e200z4 RISC 6MB Flash 125V33V 256Pin MAPBGA (Alt: SPC5748GGK1VMJ6R) RoHS : Compliant | 2,000 | ||
| 74VHC574MTC | onsemi | Octal DType FlipFlop with 3STATE Outputs ONSSPCLGC (Alt: 74VHC574MTC) RoHS : Compliant | 1,425 | |||
| MC74AC574DWR2G | onsemi | Octal D FlipFlop with 3State Outputs ONSSPCLGC (Alt: MC74AC574DWR2G) RoHS : Compliant | 1,000 | |||
| SPC5746RK1MMT5 | NXP Semiconductors | Freescale 32bit MCU Dual Power Arch core 4MB Flash 200MHz 40125degC Automotive QualMAP 252 (Alt: SPC5746RK1MMT5) RoHS : Compliant | 810 | |||
| SPC5746CHK1AMMJ6 | NXP Semiconductors | 32bit MCU e200z4 e200z2 160 MHz 3 MB 512 KB 256 Pins MAPBGA (Alt: SPC5746CHK1AMMJ6) RoHS : Compliant | 360 | |||
| SPC5745BK1AVMH2 | NXP Semiconductors | (Alt: SPC5745BK1AVMH2) RoHS : Compliant | 176 | |||
| SPC5744PFK1AMLQ8 | NXP Semiconductors | MCU 32Bit SPC5744x e200z4 RISC 25MB Flash 33V5V 144Pin LQFP Brick (Alt: SPC5744PFK1AMLQ8) RoHS : Compliant | 60 | |||
| MC74AC574DWG | onsemi | Octal D FlipFlop with 3State Outputs ONSSPCLGC (Alt: MC74AC574DWG) RoHS : Compliant | 0 | |||
| SPC5745BK1MMH6 | NXP Semiconductors | 32bit MCU e200z4 160 MHz 2 MB 256 KB 100 Pins MAPBGA (Alt: SPC5745BK1MMH6) RoHS : Compliant | 0 | |||
| PPC5748GK1MKU6A | NXP Semiconductors | MCU 32Bit MPC57xx e200Z2e200Z4 RISC 6MB Flash 5V 176Pin LQFP EP Tray (Alt: PPC5748GK1MKU6A) RoHS : Compliant | 0 | |||
| MC74HC574ADWR2G | onsemi | FlipFlop D 32 ns 35 MHz 78 mA SOIC (Alt: MC74HC574ADWR2G) RoHS : Compliant | 0 | |||
| PPC5746RTK0MMT5 | NXP Semiconductors | HighEnd MCU (Alt: PPC5746RTK0MMT5) RoHS : Compliant | 0 | |||
| PPC5744PFK1BMLQ8 | NXP Semiconductors | HighEnd MCU (Alt: PPC5744PFK1BMLQ8) RoHS : Compliant | 0 | |||
| SPC5742PK1AMLQ9R | NXP Semiconductors | SPC5742PK1AMLQ9LQFP144REEL 1 (Alt: SPC5742PK1AMLQ9R) RoHS : Compliant | 0 | |||
| SPC5745BBK1AMMH2 | NXP Semiconductors | SPC5745BBK1AMMH2LBGA100STAND (Alt: SPC5745BBK1AMMH2) RoHS : Compliant | 0 | |||
 Flip Electronics | 74VHC574MX | onsemi | Stock, Ship Today RoHS : Compliant |
| 32,000 | |
| SPC5747GK1CKU2 | NXP Semiconductors | Stock, Ship Today |
| 15,054 | ||
| SPC5748CSK0AVKU2 | NXP Semiconductors | Stock RoHS : Compliant | 7,555 | |||
| SPC5741PK1AKLQ8 | NXP Semiconductors | Stock | 6,000 | |||
| SPC5747CBK0AVKU6 | NXP Semiconductors | Stock RoHS : Compliant | 5,400 | |||
| SPC5744BFK1AVKU2 | NXP Semiconductors | Stock | 3,000 | |||
| SPC5744BSK1AVKU2 | NXP Semiconductors | Stock RoHS : Compliant | 3,000 | |||
SPC5747CK1CMJ6 | NXP Semiconductors | Stock | 2,430 | |||
| SPC5746BBK1AMMH6 | NXP Semiconductors | Stock | 1,760 | |||
| SPC5748GK1MMJ6R | NXP Semiconductors | Stock RoHS : Compliant | 1,600 | |||
| SPC5747CBK0ACKU6 | NXP Semiconductors | Stock | 1,200 | |||
SPC5746CSK1MMH6 | NXP Semiconductors | Stock RoHS : Compliant | 880 | |||
SPC5748GK1MKU6R | NXP Semiconductors | Stock RoHS : Compliant | 600 | |||
| SPC5748GSK1MKU6 | NXP Semiconductors | Stock, Ship Today RoHS : Compliant |
| 600 | ||
| MPC574XG-MB | NXP Semiconductors | Stock | 221 | |||
 Maritex | SN74HC574NSR | Texas Instruments | Flip Flops; SN74HC574NSR; TEXAS INSTRUMENTS; 20; 8; 265 ns; 2 V RoHS : Compliant |
| 3,299 | |
| SPC5746CBK1AMKU6 | NXP Semiconductors | Microcontrollers (MCU); SPC5746CBK1AMKU6; NXP SEMICONDUCTORS RoHS : Compliant |
| 398 | ||
| SPC5744PK1AMLQ9 | NXP Semiconductors | Microcontrollers (MCU); SPC5744PK1AMLQ9; NXP SEMICONDUCTORS |
| 300 | ||
| SPC5744PFK1AMLQ9 | NXP Semiconductors | Microcontrollers (MCU); SPC5744PFK1AMLQ9; NXP SEMICONDUCTORS; 384 kB; FLASH; 79; 200 MHz RoHS : Compliant |
| 299 | ||
| SPC5746CSK1AMKU6 | NXP Semiconductors | Microcontrollers (MCU); SPC5746CSK1AMKU6; NXP SEMICONDUCTORS RoHS : Compliant |
| 285 | ||
| SPC5746CHK1AMKU6 | NXP Semiconductors | Microcontrollers (MCU); SPC5746CHK1AMKU6; NXP SEMICONDUCTORS RoHS : Compliant |
| 211 | ||
| SPC5746CHK1ACKU6 | NXP Semiconductors | Microcontrollers (MCU); SPC5746CHK1ACKU6; NXP SEMICONDUCTORS |
| 200 | ||
| 74HC574D,653 | Nexperia | Flip Flops; 74HC574D,653; NEXPERIA; 20; 123 MHz RoHS : Compliant |
| 174 | ||
| U74HC574G-P20-R | Unisonic Technologies Co Ltd | Flip Flops; U74HC574G-P20-R; UTC RoHS : Compliant |
| 76 | ||
SPC5743RK1MLU5 | NXP Semiconductors | Microcontrollers (MCU); SPC5743RK1MLU5; NXP SEMICONDUCTORS; 128 kB; FLASH; 200 MHz RoHS : Compliant |
| 75 | ||
| CD74HC574M | Texas Instruments | Flip Flops; CD74HC574M; TEXAS INSTRUMENTS; 20; 8; 165 ns; 2 V RoHS : Compliant |
| 5 | ||
 Pasternack Enterprises US | PE3C5747/HS-36 | Pasternack Enterprises | Key Specifications, Connector 1 Series: TNC, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: TNC, Connector 2 Gender: Female, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector Mount Method 2: Bulkhead, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: PE-C100-LSZH, RF Cable Type: PE-C100-LSZH, RF Cable Impedance: 50 Ohm, Length, Max: 36 inches. TNC Male to TNC Female Bulkhead Low Loss Cable 36 Inch Length Using PE-C100-LSZH Coax with HeatShrink., Radio frequency assembly TNC male to TNC female bulkhead low loss cable 36 inch length using PE-C100-LSZH coax with heatshrink from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The TNC male to TNC female bulkhead low loss cable 36 inch length using PE-C100-LSZH coax with heatshrink, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom TNC to TNC cable assembly orders will ship the same business day as well. Pasternack RF coax low loss cable assembly is built with a TNC cable connection on one end and a TNC bulkhead cable connection on the other. Our low loss TNC to TNC cable assembly has a male gender on end 1 and a female on end 2. PE3C5747/HS-36 can also be known as a low loss TNC plug to TNC jack cable assembly and will be shipped the same day as it is purchased. This flexible RF cable assembly with a 0.5-inch diameter has copper clad steel as the cable's inner conducting material and PE dielectric type. This cable assembly employs durable and flexible materials, and with a 1-inch bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. Our PE3C5747/HS-36 RF cable has a LSZH jacket of 0.109-inch diameter. This radio frequency cable assembly can withstand temperatures ranging from -40 to 85 degrees C. The flexible RF cable has an in-series connection. This cable assembly has a typical propagation velocity of 66% and a minimum RF shielding of 90 dB. Our TNC male to bulkhead TNC female cable has a maximum VSWR of 1.4:1. TNC plug to TNC jack cable assembly PE3C5747/HS-36 is built with PE-C100-LSZH which is a flexible coax type. The Pasternack flexible TNC cable assembly is manufactured with TNC to TNC cable connectors, has a 50 Ohm impedance, and is double shielded. Both the connectors have a crimp/solder attachment method and a brass body with nickel plating. Additional dimensions, specifications and CAD drawings for this low loss RF cable are available on our downloadable PDF datasheet. PE3C5747/HS-36 can also be used in the other direction and will be a TNC female bulkhead to TNC male cable assembly if the opposite connectivity is required. Low loss TNC plug to TNC jack bulkhead cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality TNC to TNC cable assembly for quick shipment worldwide. Variations of TNC cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal TNC to TNC low loss RF cable assembly as per your requirements. |
| 419 | |
| PE3C5747/HS-24 | Pasternack Enterprises | Key Specifications, Connector 1 Series: TNC, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: TNC, Connector 2 Gender: Female, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector Mount Method 2: Bulkhead, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: PE-C100-LSZH, RF Cable Type: PE-C100-LSZH, RF Cable Impedance: 50 Ohm, Length, Max: 24 inches. TNC Male to TNC Female Bulkhead Low Loss Cable 24 Inch Length Using PE-C100-LSZH Coax with HeatShrink., Radio frequency assembly TNC male to TNC female bulkhead low loss cable 24 inch length using PE-C100-LSZH coax with heatshrink from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The TNC male to TNC female bulkhead low loss cable 24 inch length using PE-C100-LSZH coax with heatshrink, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom TNC to TNC cable assembly orders will ship the same business day as well. Pasternack RF coax low loss cable assembly is built with a TNC cable connection on one end and a TNC bulkhead cable connection on the other. Our low loss TNC to TNC cable assembly has a male gender on end 1 and a female on end 2. PE3C5747/HS-24 can also be known as a low loss TNC plug to TNC jack cable assembly and will be shipped the same day as it is purchased. This flexible RF cable assembly with a 0.5-inch diameter has copper clad steel as the cable's inner conducting material and PE dielectric type. This cable assembly employs durable and flexible materials, and with a 1-inch bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. Our PE3C5747/HS-24 RF cable has a LSZH jacket of 0.109-inch diameter. This radio frequency cable assembly can withstand temperatures ranging from -40 to 85 degrees C. The flexible RF cable has an in-series connection. This cable assembly has a typical propagation velocity of 66% and a minimum RF shielding of 90 dB. Our TNC male to bulkhead TNC female cable has a maximum VSWR of 1.4:1. TNC plug to TNC jack cable assembly PE3C5747/HS-24 is built with PE-C100-LSZH which is a flexible coax type. The Pasternack flexible TNC cable assembly is manufactured with TNC to TNC cable connectors, has a 50 Ohm impedance, and is double shielded. Both the connectors have a crimp/solder attachment method and a brass body with nickel plating. Additional dimensions, specifications and CAD drawings for this low loss RF cable are available on our downloadable PDF datasheet. PE3C5747/HS-24 can also be used in the other direction and will be a TNC female bulkhead to TNC male cable assembly if the opposite connectivity is required. Low loss TNC plug to TNC jack bulkhead cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality TNC to TNC cable assembly for quick shipment worldwide. Variations of TNC cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal TNC to TNC low loss RF cable assembly as per your requirements. |
| 419 | ||
| PE3C5748 | Pasternack Enterprises | Key Specifications, Connector Series 1: SMB, Connector Gender 1: Plug, Connector Polarity 1: Standard, Connector Angle 1: Right Angle, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: SMC, Connector Gender 2: Plug, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: RG174A/U, RF Cable Type: RG174, RF Cable Impedance: 50 Ohm. SMB Plug Right Angle to SMC Plug Cable Using RG174 Coax., Radio frequency assembly SMB plug right angle to SMC plug cable using RG174 coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. SMB plug right angle to SMC plug cable using RG174 coax, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom SMB to SMC cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with right angle SMB cable connection on one end and SMC cable connection on the other. Our right angle SMB to SMC cable assemblies have a plug gender on end 1 and plug on end 2. This SMB to SMC cable is a plug to plug coax assembly, PE3C5748, can also be known as a right angle SMB male to SMC male cable assembly and will be shipped same-day as it is purchased. SMB male to SMC male cable assembly PE3C5748 is built with RG174 which is a flexible coax type. The Pasternack flexible SMB cable assembly is manufactured with right angle SMB to SMC cable connectors, has a 50 Ohm impedance and is single shielded. RF specs on this 1 GHz maximum frequency SMB right angle plug to SMC plug cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3C5748 can also be used in the other direction and will be SMC plug to right angle SMB plug cable assembly if the opposite connectivity is required. SMB right angle male to SMC male cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality SMB to SMC cable assembly for quick shipment worldwide. Variations of SMB cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this SMB plug right angle to SMC plug cable using RG174 coax. | 0 | |||
| PE3C5740 | Pasternack Enterprises | Key Specifications, Connector Series 1: SMA, Connector Gender 1: Female, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: Bulkhead, Connector Impedance 1: 50 Ohm, Connector Series 2: Straight Cut Lead, Connector Gender 2: Hermaphroditic, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, RF Cable Part Number: PE-SR402AL, RF Cable Type: PE-SR402AL, RF Cable Impedance: 50 Ohm. SMA Female Bulkhead to Straight Cut Lead Cable Using PE-SR402AL Coax., Radio frequency assembly SMA female bulkhead to straight cut lead cable using PE-SR402AL coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. SMA female bulkhead to straight cut lead cable using PE-SR402AL coax, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom SMA to straight cut lead cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with SMA bulkhead cable connection on one end and straight cut lead cable connection on the other. Our SMA to straight cut lead cable assemblies have a female gender on end 1 and sexless on end 2. This SMA to straight cut lead cable is a female to sexless coax assembly, PE3C5740, can also be known as a SMA jack to straight cut lead sexless cable assembly and will be shipped same-day as it is purchased. SMA jack to straight cut lead sexless cable assembly PE3C5740 is built with PE-SR402AL which is a semi-rigid coax type. The Pasternack semi-rigid SMA cable assembly is manufactured with SMA to straight cut lead cable connectors, has a 50 Ohm impedance and is single shielded. RF specs on this SMA female bulkhead to straight cut lead sexless cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3C5740 can also be used in the other direction and will be straight cut lead sexless to SMA female bulkhead cable assembly if the opposite connectivity is required. SMA jack bulkhead to straight cut lead sexless cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality SMA to straight cut lead cable assembly for quick shipment worldwide. Variations of SMA cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this SMA female bulkhead to straight cut lead cable using PE-SR402AL coax. | 0 | |||
| PE3C5746 | Pasternack Enterprises | Key Specifications, Connector Series 1: SMA, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: TNC, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: LMR-195-LLPL, RF Cable Type: LMR-195-LLPL, RF Cable Impedance: 50 Ohm. SMA Male to TNC Male Cable Using LMR-195-LLPL Coax., Radio frequency assembly SMA male to TNC male cable using LMR-195-LLPL coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. SMA male to TNC male cable using LMR-195-LLPL coax, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom SMA to TNC cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with SMA cable connection on one end and TNC cable connection on the other. Our SMA to TNC cable assemblies have a male gender on end 1 and male on end 2. This SMA to TNC cable is a male to male coax assembly, PE3C5746, can also be known as a SMA plug to TNC plug cable assembly and will be shipped same-day as it is purchased. SMA plug to TNC plug cable assembly PE3C5746 is built with LMR-195-LLPL which is a flexible coax type. The Pasternack flexible SMA cable assembly is manufactured with SMA to TNC cable connectors, has a 50 Ohm impedance and is double shielded. RF specs on this SMA male to TNC male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3C5746 can also be used in the other direction and will be TNC male to SMA male cable assembly if the opposite connectivity is required. SMA plug to TNC plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality SMA to TNC cable assembly for quick shipment worldwide. Variations of SMA cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this SMA male to TNC male cable using LMR-195-LLPL coax. | 0 | |||
| PE3C5747 | Pasternack Enterprises | Key Specifications, Connector Series 1: TNC, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: TNC, Connector Gender 2: Female, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: Bulkhead, Connector Impedance 2: 50 Ohm, RF Cable Part Number: PE-C100-LSZH, RF Cable Type: PE-C100-LSZH, RF Cable Impedance: 50 Ohm. TNC Male to TNC Female Bulkhead Cable Using PE-C100-LSZH Coax., Radio frequency assembly TNC male to TNC female bulkhead cable using PE-C100-LSZH coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. TNC male to TNC female bulkhead cable using PE-C100-LSZH coax, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom TNC to TNC cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with TNC cable connection on one end and TNC bulkhead cable connection on the other. Our TNC to TNC cable assemblies have a male gender on end 1 and female on end 2. This TNC to TNC cable is a male to female coax assembly, PE3C5747, can also be known as a TNC plug to TNC jack cable assembly and will be shipped same-day as it is purchased. TNC plug to TNC jack cable assembly PE3C5747 is built with PE-C100-LSZH which is a flexible coax type. The Pasternack flexible TNC cable assembly is manufactured with TNC to TNC cable connectors, has a 50 Ohm impedance and is double shielded. RF specs on this 500 MHz maximum frequency TNC male to TNC female bulkhead cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3C5747 can also be used in the other direction and will be TNC female bulkhead to TNC male cable assembly if the opposite connectivity is required. TNC plug to TNC jack bulkhead cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality TNC to TNC cable assembly for quick shipment worldwide. Variations of TNC cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this TNC male to TNC female bulkhead cable using PE-C100-LSZH coax. | 0 | |||
| PE3C5749/HS | Pasternack Enterprises | Key Specifications, Connector Series 1: FAKRA, Connector Gender 1: Jack, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: BNC, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: RG174A/U, RF Cable Type: RG174, RF Cable Impedance: 50 Ohm. Black FAKRA Jack to BNC Male Cable Using RG174 Coax with HeatShrink. PE3C5749/HS is a FAKRA jack to BNC male cable using RG174 coax. This Pasternack FAKRA jack to BNC male cable assembly uses a 50 Ohm FAKRA for connector 1 and a 50 Ohm BNC for connector 2. Our jack FAKRA to male BNC cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE3C5749/HS FAKRA jack to BNC male cable assembly is constructed with RG174 coax. | 0 | |||
| PE3C5744 | Pasternack Enterprises | Key Specifications, Connector Series 1: QN, Connector Gender 1: Female, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: Bulkhead, Connector Impedance 1: 50 Ohm, Connector Series 2: QN, Connector Gender 2: Female, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: Bulkhead, Connector Impedance 2: 50 Ohm, RF Cable Part Number: RG223/U, RF Cable Type: RG223, RF Cable Impedance: 50 Ohm. QN Female Bulkhead to QN Female Bulkhead Cable Using RG223 Coax., Radio frequency assembly QN female bulkhead to QN female bulkhead cable using RG223 coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. QN female bulkhead to QN female bulkhead cable using RG223 coax, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom QN to QN cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with QN bulkhead cable connection on one end and QN bulkhead cable connection on the other. Our QN to QN cable assemblies have a female gender on end 1 and female on end 2. This QN to QN cable is a female to female coax assembly, PE3C5744, can also be known as a QN jack to QN jack cable assembly and will be shipped same-day as it is purchased. QN jack to QN jack cable assembly PE3C5744 is built with RG223 which is a flexible coax type. The Pasternack flexible QN cable assembly is manufactured with QN to QN cable connectors, has a 50 Ohm impedance and is double shielded. RF specs on this 11 GHz maximum frequency QN female bulkhead to QN female bulkhead cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. QN jack bulkhead to QN jack bulkhead cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality QN to QN cable assembly for quick shipment worldwide. Variations of QN cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this QN female bulkhead to QN female bulkhead cable using RG223 coax. | 0 | |||
| PE3C5749 | Pasternack Enterprises | Key Specifications, Connector Series 1: BNC, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: FAKRA, Connector Gender 2: Jack, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: RG174A/U, RF Cable Type: RG174, RF Cable Impedance: 50 Ohm. BNC Male to Black FAKRA Jack Cable Using RG174 Coax., Radio frequency assembly BNC male to black FAKRA jack cable using RG174 coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. BNC male to black FAKRA jack cable using RG174 coax, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom BNC to FAKRA cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with BNC cable connection on one end and FAKRA cable connection on the other. Our BNC to FAKRA cable assemblies have a male gender on end 1 and jack on end 2. This BNC to FAKRA cable is a male to jack coax assembly, PE3C5749, can also be known as a BNC plug to FAKRA female cable assembly and will be shipped same-day as it is purchased. BNC plug to FAKRA female cable assembly PE3C5749 is built with RG174 which is a flexible coax type. The Pasternack flexible BNC cable assembly is manufactured with BNC to FAKRA cable connectors, has a 50 Ohm impedance and is single shielded. RF specs on this 1 GHz maximum frequency BNC male to FAKRA jack cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3C5749 can also be used in the other direction and will be FAKRA jack to BNC male cable assembly if the opposite connectivity is required. BNC plug to FAKRA female cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality BNC to FAKRA cable assembly for quick shipment worldwide. Variations of BNC cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this BNC male to black FAKRA jack cable using RG174 coax. | 0 | |||
| PE3C5745 | Pasternack Enterprises | Key Specifications, Connector Series 1: TNC, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: TNC, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: LMR-195-LLPL, RF Cable Type: LMR-195-LLPL, RF Cable Impedance: 50 Ohm. TNC Male to TNC Male Cable Using LMR-195-LLPL Coax., Radio frequency assembly TNC male to TNC male cable using LMR-195-LLPL coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. TNC male to TNC male cable using LMR-195-LLPL coax, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom TNC to TNC cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with TNC cable connection on one end and TNC cable connection on the other. Our TNC to TNC cable assemblies have a male gender on end 1 and male on end 2. This TNC to TNC cable is a male to male coax assembly, PE3C5745, can also be known as a TNC plug to TNC plug cable assembly and will be shipped same-day as it is purchased. TNC plug to TNC plug cable assembly PE3C5745 is built with LMR-195-LLPL which is a flexible coax type. The Pasternack flexible TNC cable assembly is manufactured with TNC to TNC cable connectors, has a 50 Ohm impedance and is double shielded. RF specs on this TNC male to TNC male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. TNC plug to TNC plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality TNC to TNC cable assembly for quick shipment worldwide. Variations of TNC cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this TNC male to TNC male cable using LMR-195-LLPL coax. | 0 | |||
| PE3C5743/HS2 | Pasternack Enterprises | 0 | ||||
| PE3C5741 | Pasternack Enterprises | Key Specifications, Connector Series 1: SMA, Connector Gender 1: Female, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: Straight Cut Lead, Connector Gender 2: Hermaphroditic, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, RF Cable Part Number: PE-SR402TN, RF Cable Type: RG402 Tinned, RF Cable Impedance: 50 Ohm. SMA Female to Straight Cut Lead Cable Using Tinned RG402 Coax., Radio frequency assembly SMA female to straight cut lead cable using tinned RG402 coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. SMA female to straight cut lead cable using tinned RG402 coax, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom SMA to straight cut lead cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with SMA cable connection on one end and straight cut lead cable connection on the other. Our SMA to straight cut lead cable assemblies have a female gender on end 1 and sexless on end 2. This SMA to straight cut lead cable is a female to sexless coax assembly, PE3C5741, can also be known as a SMA jack to straight cut lead sexless cable assembly and will be shipped same-day as it is purchased. SMA jack to straight cut lead sexless cable assembly PE3C5741 is built with RG402 tinned which is a semi-rigid coax type. The Pasternack semi-rigid SMA cable assembly is manufactured with SMA to straight cut lead cable connectors, has a 50 Ohm impedance and is single shielded. RF specs on this SMA female to straight cut lead sexless cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3C5741 can also be used in the other direction and will be straight cut lead sexless to SMA female cable assembly if the opposite connectivity is required. SMA jack to straight cut lead sexless cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality SMA to straight cut lead cable assembly for quick shipment worldwide. Variations of SMA cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this SMA female to straight cut lead cable using tinned RG402 coax. | 0 | |||
| PE3C5747LF | Pasternack Enterprises | Key Specifications, Connector Series 1: TNC, Connector Gender 1: Female, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: Bulkhead, Connector Impedance 1: 50 Ohm, Connector Series 2: TNC, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: PE-C100-LSZH, RF Cable Type: PE-C100-LSZH, RF Cable Impedance: 50 Ohm. TNC Female Bulkhead to TNC Male Cable Using PE-C100-LSZH Coax, LF Solder. PE3C5747LF is a TNC female bulkhead to TNC male cable using PE-C100-LSZH coax. This Pasternack TNC female bulkhead to TNC male cable assembly uses a 50 Ohm TNC for connector 1 and a 50 Ohm TNC for connector 2. Our female TNC bulkhead to male TNC cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE3C5747LF TNC female bulkhead to TNC male cable assembly is constructed with PE-C100-LSZH coax. | 0 | |||
| PE3C5742 | Pasternack Enterprises | Key Specifications, Connector Series 1: 3.5mm, Connector Gender 1: Female, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: Straight Cut Lead, Connector Gender 2: Hermaphroditic, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, RF Cable Part Number: PE-SR402TN, RF Cable Type: RG402 Tinned, RF Cable Impedance: 50 Ohm. 3.5mm Female to Straight Cut Lead Cable Using Tinned RG402 Coax., Radio frequency assembly 3.5mm female to straight cut lead cable using tinned RG402 coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. 3.5mm female to straight cut lead cable using tinned RG402 coax, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom 3.5mm to straight cut lead cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with 3.5mm cable connection on one end and straight cut lead cable connection on the other. Our 3.5mm to straight cut lead cable assemblies have a female gender on end 1 and sexless on end 2. This 3.5mm to straight cut lead cable is a female to sexless coax assembly, PE3C5742, can also be known as a 3.5mm jack to straight cut lead sexless cable assembly and will be shipped same-day as it is purchased. 3.5mm jack to straight cut lead sexless cable assembly PE3C5742 is built with RG402 tinned which is a semi-rigid coax type. The Pasternack semi-rigid 3.5mm cable assembly is manufactured with 3.5mm to straight cut lead cable connectors, has a 50 Ohm impedance and is single shielded. RF specs on this 3.5mm female to straight cut lead sexless cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3C5742 can also be used in the other direction and will be straight cut lead sexless to 3.5mm female cable assembly if the opposite connectivity is required. 3.5mm jack to straight cut lead sexless cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality 3.5mm to straight cut lead cable assembly for quick shipment worldwide. Variations of 3.5mm cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this 3.5mm female to straight cut lead cable using tinned RG402 coax. | 0 | |||
| PE3C5743 | Pasternack Enterprises | Key Specifications, Connector Series 1: N, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: QN, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: LMR-240-UF, RF Cable Type: LMR-240-UF, RF Cable Impedance: 50 Ohm. N Male to Snap-On QN Male Cable Using LMR-240-UF Coax., Radio frequency assembly N male to snap-on QN male cable using LMR-240-UF coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. N male to snap-on QN male cable using LMR-240-UF coax, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom N type to QN cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with type N cable connection on one end and QN cable connection on the other. Our type N to QN cable assemblies have a male gender on end 1 and male on end 2. This type N to QN cable is a male to male coax assembly, PE3C5743, can also be known as a type N plug to QN plug cable assembly and will be shipped same-day as it is purchased. N type plug to QN plug cable assembly PE3C5743 is built with LMR-240-UF which is a flexible coax type. The Pasternack flexible N cable assembly is manufactured with type N to QN cable connectors, has a 50 Ohm impedance and is double shielded. RF specs on this 5.8 GHz maximum frequency N type male to QN male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3C5743 can also be used in the other direction and will be QN male to type N male cable assembly if the opposite connectivity is required. N type plug to QN plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality type N to QN cable assembly for quick shipment worldwide. Variations of type N cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this N male to snap-on QN male cable using LMR-240-UF coax. | 0 | |||
 Vyrian | SPC5748CSK0AVKU2 | NXP Semiconductors | RISC Microcontroller, 32-Bit, FLASH, E200Z4 CPU, 120MHz, CMOS, PQFP176 RoHS : Compliant | 11,036 | ||
| EV1HMC574AMS8 | Analog Devices Inc | RoHS : Compliant | 9,593 | |||
| CD74AC574M96E4 | Texas Instruments | Bus Driver, AC Series, 1-Func, 8-Bit, True Output, CMOS, PDSO20 RoHS : Compliant | 9,093 | |||
| 74LVC574APW-T | Nexperia | Bus Driver, LVC/LCX/Z Series, 1-Func, 8-Bit, True Output, CMOS, PDSO20 RoHS : Compliant | 8,756 | |||
| SPC5743RK1MLQ5R | NXP Semiconductors | RoHS : Compliant | 8,169 | |||
| SN74LVC574APWTE4 | Texas Instruments | Bus Driver, LVC/LCX/Z Series, 1-Func, 8-Bit, True Output, CMOS, PDSO20 RoHS : Compliant | 6,018 | |||
| 74LVC574AD | Nexperia | Bus Driver, LVC/LCX/Z Series, 1-Func, 8-Bit, True Output, CMOS, PDSO20 RoHS : Compliant | 6,012 | |||
| SPC5746CK1AMMJ6R | NXP Semiconductors | RISC Microcontroller, 32-Bit, FLASH, E200Z4 CPU, 160MHz, CMOS, PBGA256 RoHS : Compliant | 5,928 | |||
SN54AHC574WR | Texas Instruments | Bus Driver, AHC Series, 1-Func, 8-Bit, True Output, CMOS, CDFP20 | 5,231 | |||
| 74AC574B | STMicroelectronics | RoHS : Compliant | 4,994 | |||
| JM54AC574SRA-RH | National Semiconductor Corporation | RoHS : Not Compliant | 4,824 | |||
| 74AC574SC | National Semiconductor Corporation | Bus Driver, AC Series, 1-Func, 8-Bit, True Output, CMOS, PDSO20 RoHS : Not Compliant | 4,704 | |||
54AC574LMQB | Texas Instruments | Bus Driver, AC Series, 1-Func, 8-Bit, True Output, CMOS, CQCC20 | 4,684 | |||
| PTLC6C5748QDCARQ1 | Texas Instruments | LED Driver | 3,465 | |||
| SN54HC574JYB | Texas Instruments | 3,056 | ||||
 Win Source Electronics | SN74AHC574PW | Texas Instruments | IC FF D-TYPE SNGL 8BIT 20TSSOP RoHS : Compliant |
| 72,060 | |
| SN74AHC574PWRG4 | Texas Instruments | OCTAL EDGE-TRIGGERED D-TYPE FLIP-FLOPS WITH 3-STATE OUTPUTS | IC FF D-TYPE SNGL 8BIT 20TSSOP RoHS : Compliant |
| 68,260 | ||
| SN74AHC574PWRE4 | Texas Instruments | IC FF D-TYPE SNGL 8BIT 20TSSOP / Flip Flop 1 Element D-Type 8 Bit Positive Edge 20-TSSOP (0.173", 4.40mm Width) RoHS : Compliant |
| 66,150 | ||
| SN74LVC574APW | Texas Instruments | OCTAL EDGE-TRIGGERED D-TYPE FLIP-FLOPS WITH 3-STATE OUTPUTS | IC FF D-TYPE SNGL 8BIT 20TSSOP RoHS : Compliant |
| 64,761 | ||
| SN74LVC574APWRG4 | Texas Instruments | IC D-TYPE POS TRG SNGL 20TSSOP RoHS : Compliant |
| 59,800 | ||
| SN74HC574NS | Texas Instruments | IC FF D-TYPE SNGL 8BIT 20SO |
| 26,000 | ||
| MC74HC574ADW | onsemi | IC FLIP FLOP OCT D 3ST 20-SOIC RoHS : Not Compliant |
| 20,000 | ||
| SN74HC574PW | Texas Instruments | OCTAL EDGE-TRIGGERED D-TYPE FLIP-FLOPS WITH 3-STATE OUTPUTS | IC FF D-TYPE SNGL 8BIT 20TSSOP RoHS : Compliant |
| 12,000 | ||
| SN74HC574PWR | Texas Instruments | IC D-TYPE POS TRG SNGL 20TSSOP RoHS : Compliant |
| 11,510 | ||
| SN74HC574PWRE4 | Texas Instruments | IC FF D-TYPE SNGL 8BIT 20TSSOP / Flip Flop 1 Element D-Type 8 Bit Positive Edge 20-TSSOP (0.173", 4.40mm Width) RoHS : Compliant |
| 10,900 | ||
| 74HC574D | Nexperia | Flip Flop D-Type Bus Interface Pos-Edge 3-ST 1-Element 20-Pin SO / Octal D-type flip-flop; positive edge-trigger; 3-state | IC FF D-TYPE SNGL 8BIT 20SOIC RoHS : Compliant |
| 10,000 | ||
| 74LVC574APW | Nexperia | Octal D-type flip-flop with 5-volt tolerant inputs/outputs; positive edge-trigger 3-State RoHS : Compliant |
| 4,562 | ||
| MC74HC574ADWR2G | onsemi | IC D-TYPE POS TRG SNGL 20SOIC RoHS : Compliant |
| 2,327 | ||
| SPC574K72E7C6FAR | STMicroelectronics | IC MCU 32BIT 2.5MB FLSH 176ELQFP / e200z2, e200z4, e200z4 series Microcontroller IC 32-Bit Tri-Core 80MHz/160MHz 2.5MB (2.5M x 8) FLASH 176-eLQFP (24x24) RoHS : Compliant |
| 1,500 | ||
| SPC5748GHK0AMMJ6 | Nexperia | IC MCU 32BIT 6MB FLSH 256MAPPBGA |
| 388 |
| Does ALLDATASHEET help your business so far? [ DONATE ] |
About Alldatasheet | Advertisement | Contact us | Privacy Policy | Link to Datasheet | Link Exchange | Manufacturer List All Rights Reserved짤Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |
British ▼ 
English
Chinese
German
Japanese
Russian
Korean
Spanish
French
Italian
Portuguese
Polish
Vietnamese
Indian
Mexican
New Zealand