| Distributor | Part # | Manufacturer | Description | Price | Qty.
BuyNow |
DigiKey | TFCR0805-8W-E-7682BT-CT
| VENKEL LTD | THIN FILM CR,0805,1/8W,25PPM,76 | | 1,775
 |
62GB-50T10-06PE-760-301-771
| PEI-GENESIS | 62GB 6C 6#20 PIN RECP BlZnCo | 100 : $33.85
50 : $35.54
25 : $38.42
10 : $40.62
1 : $43.08
|
| 100
|
ATS-04E-76-C2-R0
 | Advanced Thermal Solutions Inc | HEATSINK 25X25X25MM R-TAB T766
RoHS : Compliant | 25 : $5.4884
10 : $5.762
1 : $6.51
|
| 25
|
CE.76557
| Elesa SPA | PW12, DIGITAL-ANALOGUE POSITION | | 10
|
CE.76601
| Elesa SPA | PW12, DIGITAL-ANALOGUE POSITION | | 10
|
CE.76521
| Elesa SPA | PW12, DIGITAL-ANALOGUE POSITION | | 10
|
CE.76602
| Elesa SPA | PW12, DIGITAL-ANALOGUE POSITION | | 10
|
CE.76241
| Elesa SPA | PW12, DIGITAL-ANALOGUE POSITION | | 10
|
CE.76566
| Elesa SPA | PW12, DIGITAL-ANALOGUE POSITION | | 10
|
CE.76647
| Elesa SPA | PW12, DIGITAL-ANALOGUE POSITION | | 10
|
CE.76692
| Elesa SPA | PW12, DIGITAL-ANALOGUE POSITION | | 10
|
E765
| Eclipse Magnetics | SMCO SHALLOW POT 20X6MM | 500 : $11.55714
100 : $12.3589
50 : $12.7568
30 : $13.073
10 : $13.825
5 : $14.356
1 : $15.78
|
| 4
|
PE7612-8
| Pasternack Enterprises | 8 DB FIXED ATTENUATOR N-TYPE MAL | 100 : $89.4125
50 : $91.5834
25 : $96.1676
10 : $102.585
1 : $120.68
|
| 1
|
PE7623-6
| Pasternack Enterprises | 6 DB FIXED ATTENUATOR SMA MALE T | 50 : $144.1624
25 : $148.8448
10 : $158.773
1 : $186.77
|
| 1
|
BULK-PS-PE-763
| Fix Supply | White Marine HDPE Bar - 3/4" Thi | | 1
|
Avnet Americas | GRM155R60E475ME76D
 | Murata Manufacturing Co Ltd | SMD Multilayer Ceramic Capacitor, 4.7 uF, 2.5 V, 0402 [1005 Metric], ? 20%, X5R, GRM Series, 1 mm - Tape and Reel (Alt: GRM155R60E475ME76D)
RoHS : Compliant | | 10,000
|
UE76A203000T
| Amphenol Corporation | Conn SFP RCP 20 POS 0.8mm Solder RA SMD 20 Terminal 1 Port T/R - Tape and Reel (Alt: UE76A203000T)
RoHS : Compliant | 48,000 : $0.80875
24,000 : $0.82949
12,000 : $0.84575
6,000 : $0.86267
3,000 : $0.87432
|
| 4,000
|
MT53E768M16D1ZW-046 WT:C
| Micron Technology Inc | DRAM, LPDDR4 SDRAM, 12 Gbit, 768M x 16bit, 2.133 GHz, 200 Pins, TFBGA - Trays (Alt: MT53E768M16D1ZW-046 WT:C)
RoHS : Compliant | | 1,360
|
UE76A205000T
| Amphenol Corporation | Pluggable I/O Connector, SFP+, 20 Contacts, 1 x 1 (Single), Surface Mount Right Angle - Tape and Reel (Alt: UE76A205000T)
RoHS : Compliant | 48,000 : $0.78845
24,000 : $0.79256
12,000 : $0.79666
6,000 : $0.80313
3,000 : $0.82133
|
| 500
|
RTAN0603DTE76R8
| SEI Stackpole Electronics Inc | SMD Chip Resistor, 76.8 ohm, ? 0.5%, 150 mW, 0603 [1608 Metric], Thin Film, Precision - Tape and Reel (Alt: RTAN0603DTE76R8)
RoHS : Compliant | 80,000 : $0.11611
40,000 : $0.11671
20,000 : $0.11731
10,000 : $0.11791
5,000 : $0.12143
|
| 0
|
RTAN0805BTE76R8
| SEI Stackpole Electronics Inc | SMD Chip Resistor, 76.8 ohm, ? 0.1%, 200 mW, 0805 [2012 Metric], Thin Film, High Precision, Anti-Sulfur - Tape and Reel (Alt: RTAN0805BTE76R8)
RoHS : Compliant | 80,000 : $0.15966
40,000 : $0.16049
20,000 : $0.16131
10,000 : $0.16216
5,000 : $0.17143
|
| 0
|
654E7683I3T
| CTS Corporation | - Tape and Reel (Alt: 654E7683I3T)
RoHS : Compliant | 40,000 : $2.5317
20,000 : $2.54475
10,000 : $2.5578
5,000 : $2.69189
1,000 : $3.00286
|
| 0
|
RN55E7682FRE7
| Vishay Intertechnologies | Through Hole Resistor, 76.8 kohm, RN Series, 100 mW, ? 1%, Axial Leaded, 200 V, Metal Film - Tape and Reel (Alt: RN55E7682FRE7)
RoHS : Not Compliant | 48,000 : $0.234
24,000 : $0.2352
12,000 : $0.2364
6,000 : $0.275
1,500 : $0.46133
|
| 0
|
RN55E7683FBSL
| Vishay Intertechnologies | Through Hole Resistor, 768 kohm, RN Series, 100 mW, ? 1%, Axial Leaded, 200 V, Metal Film - Bulk (Alt: RN55E7683FBSL)
RoHS : Not Compliant | 10,000 : $6.21797
5,000 : $6.24985
1,000 : $6.28174
500 : $6.31363
100 : $6.3774
|
| 0
|
RN60E7681FRSL
| Vishay Intertechnologies | Through Hole Resistor, 7.68 kohm, RN Series, 125 mW, ? 1%, Axial Leaded, 300 V, Metal Film - Tape and Reel (Alt: RN60E7681FRSL)
RoHS : Not Compliant | 20,000 : $1.62006
10,000 : $1.62837
5,000 : $1.63668
1,000 : $1.64498
500 : $1.6616
|
| 0
|
PTN0505E7680BST1
| Vishay Intertechnologies | SMD Chip Resistor, 768 ohm, ? 0.1%, 150 mW, 0505 [1412 Metric], Thin Film, Precision, PTN Series - Tape and Reel (Alt: PTN0505E7680BST1)
RoHS : Compliant | 20,000 : $1.11473
10,000 : $1.12725
5,000 : $1.18642
3,000 : $1.37888
1,000 : $1.6497
|
| 0
|
PTN0603E7681BST1
| Vishay Intertechnologies | SMD Chip Resistor, 7.68 kohm, ? 0.1%, 150 mW, 0603 [1608 Metric], Thin Film, Precision, PTN Series - Tape and Reel (Alt: PTN0603E7681BST1)
RoHS : Compliant | 20,000 : $0.4251
10,000 : $0.42728
5,000 : $0.42946
3,000 : $0.43164
1,000 : $0.436
|
| 0
|
PTN1505E76R8BBT1
| Vishay Intertechnologies | SMD Chip Resistor, 76.8 ohm, ? 0.1%, 400 mW, 1505 [3812 Metric], Thin Film, Precision, PTN Series - Tape and Reel (Alt: PTN1505E76R8BBT1)
RoHS : Not Compliant | 20,000 : $1.09871
10,000 : $1.11105
5,000 : $1.17546
3,000 : $1.4039
1,000 : $1.6497
|
| 0
|
PTN2208E7681BBT5
| Vishay Intertechnologies | SMD Chip Resistor, 7.68 kohm, ? 0.1%, 750 mW, 2208 [5819 Metric], Thin Film, Precision, PTN Series - Tape and Reel (Alt: PTN2208E7681BBT5)
RoHS : Not Compliant | 10,000 : $2.0559
5,000 : $2.187
2,500 : $2.5208
1,000 : $2.9885
500 : $3.9339
|
| 0
|
62GB-12E08-98PE(760)(771)
| Amphenol Corporation | 62GB - Bulk (Alt: 62GB12E0898PE760771)
RoHS : Not Compliant | | 0
 |
Newark | RP73PF1E768RBTD
| TE Connectivity | RP 1E 0.1W 768R 0.1% 25PPM 5K RL;
RoHS : Compliant | 5,000 : $0.118
15,000 : $0.116
25,000 : $0.113
|
| 5,000
|
RP73PF1E76R8BTDF
| TE Connectivity | CHIP RES SMD, 76R8, ±0.1%, 100MW;
RoHS : Compliant | 1 : $0.405
25 : $0.286
100 : $0.208
250 : $0.178
500 : $0.157
1,000 : $0.132
2,500 : $0.131
5,000 : $0.129
|
| 986
|
RP73PF1E76R8BTDF
| TE Connectivity | CHIP RES SMD, 76R8, ±0.1%, 100MW;
RoHS : Compliant | 1 : $0.405
25 : $0.286
100 : $0.208
250 : $0.178
500 : $0.157
1,000 : $0.132
2,500 : $0.131
5,000 : $0.129
|
| 986
|
UE76A205000T
| Amphenol Communications Solutions | I/O CONN, SFP+, 20POS, 1 X 1 (SINGLE);
RoHS : Compliant | 1 : $1.92
1,000 : $1.71
2,500 : $1.58
|
| 754
|
MT53E768M16D1ZW-046 AIT:C
| Micron Technology Inc | DRAM, LPDDR4, 12GBIT; Available until stocks are exhausted
RoHS : Not Compliant | | 100
|
MDBE15PE766
| Amphenol Communications Solutions | HD-D SUB CONN, PLUG, DE, 15POS, SOLDER; D Sub Connector Type:High Density; Gender:Plug; Product Range:MDB Series; No. of Contacts:15Contacts; D Sub Shell Size:DE; Contact Termination Type:Solder; Connector Mounting:Through Hole MountRoHS Compliant: Yes
RoHS : Compliant | 1 : $26.44
5 : $25.36
10 : $24.27
25 : $20.52
50 : $20.27
100 : $19.85
250 : $19.42
|
| 48
|
MT53E768M64D4HJ-046 AIT:C
| Micron Technology Inc | SDRAM, 48GBIT, 2.133 GHZ, TFBGA-556; Available until stocks are exhausted Alternative available
RoHS : Compliant | | 42
|
MT53E768M64D4HJ-046 AAT:C
| Micron Technology Inc | SDRAM, 48GBIT, 2.133 GHZ, TFBGA-556; Available until stocks are exhausted Alternative available
RoHS : Compliant | | 42
|
OCI-490-20 IE760-XE-T
| EPIGAP OSA Photonics | IR EMITTER, 0.35A, 760NM, SMD;
RoHS : Compliant | 1 : $17.17
50 : $15.79
100 : $14.59
250 : $13.41
500 : $12.23
1,000 : $11.42
2,500 : $10.73
5,000 : $10.19
|
| 41
|
OCI-490-20 IE760-XE-T
| EPIGAP OSA Photonics | IR EMITTER, 0.35A, 760NM, SMD;
RoHS : Compliant | 1 : $17.17
50 : $15.79
100 : $14.59
250 : $13.41
500 : $12.23
1,000 : $11.42
2,500 : $10.73
5,000 : $10.19
|
| 41
|
E763NEO
| Eclipse Magnetics | NDFEB SHALLOW POT, 13MM X 4.5MM;
RoHS : Not Compliant | 1 : $5.54
10 : $4.98
25 : $4.58
50 : $4.4
100 : $4.19
250 : $4.03
500 : $3.87
1,000 : $3.75
|
| 29
|
UE76A203010T
| Amphenol Communications Solutions | PLUGGABLE I/O CONN, SFP+, R/A, 20POS; Connector Type:SFP+; No. of Contacts:20Contacts; Port Configuration:1 x 1 (Single); Connector Mounting:Surface Mount Right Angle; Product Range:ExpressPort Series RoHS Compliant: Yes
RoHS : Compliant | 1 : $2.71
10 : $2.35
25 : $2.13
50 : $2.09
100 : $2.05
250 : $1.94
|
| 22
|
E760NEO
| Eclipse Magnetics | NDFEB SHALLOW POT, 6MM X 4.5MM;
RoHS : Not Compliant | 1 : $2.36
10 : $2.1
25 : $1.92
50 : $1.83
100 : $1.74
250 : $1.66
500 : $1.59
1,000 : $1.54
|
| 18
|
MIKROE-764
| MikroElektronika | DEBUGGER, MIKROPROG, PIC-DSPIC-PIC32;
RoHS : Compliant | | 8
|
MT53E768M32D2ZW-046 WT:C
| Micron Technology Inc | SDRAM, 24GBIT, 2.133 GHZ, TFBGA-200; DRAM Type:Mobile LPDDR4; Memory Configuration:768M x 32bit; Clock Frequency Max:2.133GHz; IC Case / Package:TFBGA; No. of Pins:200Pins; Supply Voltage Nom:1.1V; IC Mounting:Surface Mount RoHS Compliant: Yes
RoHS : Compliant | | 4
|
RS | MIKROE-763
| MikroElektronika | DEVELOPMENT BOARDS & KITS, PIC / DSPIC MINI-32 BOARD | | 23
|
VP2310BE761MB200
| Norgren | VALVE, PROP PRESS DN16 0-10 BAR, HERION | | 5
|
VP2316BE761MB200
| Norgren | PROP/PRESSURE VALVE ND16 16BA, PRESSURE SWITCHES | | 4
|
LE7-63-1753
| Sprecher + Schuh | LE7 UL508 DISCONNECT SWITCH, FRONT MOUNT, 63A, 3-POLE, POLES 3-POLE, GRAY, LE7 | 1 : $122.9
10 : $116.75
25 : $110.61
50 : $104.46
100 : $98.32
|
| 3
|
LSG55T012E76S
| Nidec Motor Corporation | GEARMOTOR, STEPPING, 55MM, 0.10 STEP, 12VDC, 75 GEAR REDUCT, TORQUE 162 OZ-IN | | 3
|
LC1D09FE7 (6089330)
| Schneider Electric | NON-REVERSING CONTACTOR, 115VAC, 9A, 3-P, DIN RAIL, TESYS D SERIES | | 1
|
LC1D25FE7 (6089598)
| Schneider Electric | NON-REVERSING CONTACTOR, 115VAC, 25A, 3-P, DIN RAIL, TESYS D SERIES | | 1
|
E76
| Siemens | HEATER | | 0
|
3NE76481C
| Siemens | SITOR FUSE 525A AR 2000V 210MM | | 0
|
ISE76G-N02T-L2
| SMC Corporation of America | PRESSURE SWITCH, IP67, 0 TO 5MPA, 3 SCREEN, IO LINK 2XPNP/NPN, 1/4NPT | | 0
|
PROTECTPLUS-E76
| Teledyne FLIR | PROTECT+ 3 YEAR EXTENDED WARRANTY AND CARE+ BUNDLE FOR E76 | | 0
|
5023-DXPEE7.625
| Bimba Manufacturing Company | CYLINDER, O.L.,S.R.; 2-1/2IN BORE; STROKE: 23IN; DBL ACT/DE/RP MT, 7.625 IN | | 0
|
E76-CNT010P-M12
| Eaton Cutler-Hammer | 10CM CONTRAST MARK SENSOR, 18MM BODY, M12 CONN, PNP | 1 : $203.79
5 : $185.45
10 : $179.33
|
| 0
|
P4ORK0612SRIE (76675)
| Banner Engineering Corp | SOLUTION KIT - PRESENCEPLUS P4 OMNI RIGHT ANGLE, P, PRESENCEPLUS SERIES | 1 : $4,356.59
5 : $3,920.93
10 : $3,703.1
|
| 0
|
P4OIK0608SRRE (76979)
| Banner Engineering Corp | SOLUTION KIT - PRESENCEPLUS P4 OMNI IN-LINE, P4C06, PRESENCEPLUS SERIES | 1 : $4,356.59
5 : $3,920.93
10 : $3,703.1
|
| 0
|
Microchip Technology Inc | EV88E76A
| Microchip Technology Inc | EVB-LAN7801-EDS, Projected EOL: | | 13
|
Rochester Electronics | BA885E7631HTMA1
| Infineon Technologies AG | PIN Diode
RoHS : Compliant | 100,000 : $0.0411
10,000 : $0.0491
1,000 : $0.055
500 : $0.0597
100 : $0.0663
|
| 50,000
|
Sager | SETLBKYE7.62AUEE
 | C&K Switches | Pushbutton Switches Microminiature SPDT~ Key Switch
RoHS : Compliant | | 0
|
E763HD
| ABB Group | Thomas & Betts | | 0
|
E765
| ABB Group | Thomas & Betts | | 0
|
ATS-01E-76-C3-R0
| Advanced Thermal Solutions Inc | PUSH PIN HS ASMBLY,FINE-PITCH,STRAIGHT, HOLE PATTERN:RIGHT-TABBED,BLUE,T412
RoHS : Compliant | 25 : $5.11
75 : $4.88
150 : $4.74
300 : $4.61
|
| 0
|
E761HD
| ABB Group | Thomas & Betts | 1 : $217.43
4 : $211.21
8 : $205.36
16 : $197.14
|
| 0
|
AXE760127
| Panasonic Electronic Components | BOARD TO BOARD & MEZZANINE CONNECTORS
RoHS : Compliant | | 0
|
ATS-04E-76-C2-R0
| Advanced Thermal Solutions Inc | PUSH PIN HS ASMBLY,FINE-PITCH,STRAIGHT, HOLE PATTERN:RIGHT-TABBED,BLUE,T766
RoHS : Compliant | 25 : $5.17
75 : $4.94
150 : $4.8
300 : $4.67
|
| 0
|
ATS-11E-76-C2-R0
| Advanced Thermal Solutions Inc | PUSH PIN HS ASMBLY,FINE-PITCH,STRAIGHT, HOLE PATTERN:RIGHT-TABBED,BLUE,T766 | 25 : $5.17
75 : $4.94
150 : $4.8
300 : $4.67
|
| 0
|
FFA.4E.760.CNS
| LEMO connectors | Circular Push Pull Connectors STRAIGHT PLUG CABLE COLLET | | 0
|
ATS-07E-76-C2-R0
| Advanced Thermal Solutions Inc | PUSH PIN HS ASMBLY,FINE-PITCH,STRAIGHT, HOLE PATTERN:RIGHT-TABBED,BLUE,T766
RoHS : Compliant | 25 : $5.17
75 : $4.94
150 : $4.8
300 : $4.67
|
| 0
|
ATS-15E-76-C1-R0
| Advanced Thermal Solutions Inc | PUSH PIN HS ASMBLY,FINE-PITCH,STRAIGHT, HOLE PATTERN:RIGHT-TABBED,BLUE,NO TIM | 25 : $4.78
75 : $4.57
150 : $4.44
325 : $4.32
|
| 0
|
SERFLBKYE7.62AUOA
| C&K Switches | Pushbutton Switches | | 0
|
SERULFYE7.62AUOA
| C&K Switches | Pushbutton Switches | | 0
|
ATS-04E-76-C1-R0
| Advanced Thermal Solutions Inc | PUSH PIN HS ASMBLY,FINE-PITCH,STRAIGHT, HOLE PATTERN:RIGHT-TABBED,BLUE,NO TIM
RoHS : Compliant | 25 : $4.78
75 : $4.57
150 : $4.44
325 : $4.32
|
| 0
|
ATS-11E-76-C1-R0
| Advanced Thermal Solutions Inc | PUSH PIN HS ASMBLY,FINE-PITCH,STRAIGHT, HOLE PATTERN:RIGHT-TABBED,BLUE,NO TIM | 25 : $4.78
75 : $4.57
150 : $4.44
325 : $4.32
|
| 0
|
TME | MBA0204VE7682BC100
| Vishay Intertechnologies | Resistor: metal film; 76.8kΩ; precise; THT; 400mW; ±0.1%; V; 200V
RoHS : Compliant | | 0
|
CRT03J7E76R8
| Viking Technology | Resistor: thick film; 76.8Ω; 0603; 100mW; ±5%; CRT; -55÷155°C; 1A | | 0
|
CRT06J7E7683
| Viking Technology | Resistor: thick film; 768kΩ; 1206; 250mW; ±5%; CRT; -55÷155°C; 2A | | 0
|
CRT0AJ7E7680
| Viking Technology | Resistor: thick film; 768Ω; 2010; 750mW; ±5%; CRT; -55÷155°C; 2A | | 0
|
CRT12J7E76R8
| Viking Technology | Resistor: thick film; 76.8Ω; 2512; 1W; ±5%; CRT; -55÷155°C; 2A | | 0
|
MCT0603ME7682BP500
| Vishay Intertechnologies | Resistor: thin film; 76.8kΩ; SMD; 0603; 0.21W; ±0.1%; MCT0603; M; 75V
RoHS : Compliant | | 0
|
CRT02F7E7682
| Viking Technology | Resistor: thick film; 76.8kΩ; 0402; 62.5mW; ±1%; CRT; -55÷155°C | | 0
|
CRT0AF7E7683
| Viking Technology | Resistor: thick film; 768kΩ; 2010; 750mW; ±1%; CRT; -55÷155°C; 2A | | 0
|
MCT06030E7682BP500
| Vishay Intertechnologies | Resistor: thin film; 76.8kΩ; SMD; 0603; 0.125W; ±0.1%; MCT0603; 0
RoHS : Compliant | | 0
|
CRT02F7E76R8
| Viking Technology | Resistor: thick film; 76.8Ω; 0402; 62.5mW; ±1%; CRT; -55÷155°C; 1A | | 0
|
CRT03J7E7681
| Viking Technology | Resistor: thick film; 7.68kΩ; 0603; 100mW; ±5%; CRT; -55÷155°C; 1A | | 0
|
CRT10F7E7683
| Viking Technology | Resistor: thick film; 768kΩ; 1210; 500mW; ±1%; CRT; -55÷155°C; 2A | | 0
|
CRT12J7E7681
| Viking Technology | Resistor: thick film; 7.68kΩ; 2512; 1W; ±5%; CRT; -55÷155°C; 2A | | 0
|
MCT06030E7680CP100
| Vishay Intertechnologies | Resistor: thin film; 768Ω; SMD; 0603; 0.125W; ±0.25%; MCT0603; 0; 75V
RoHS : Compliant | | 0
|
CRT03F7E7683
| Viking Technology | Resistor: thick film; 768kΩ; 0603; 100mW; ±1%; CRT; -55÷155°C; 1A | | 0
|
ComSIT USA | GRM21BR70J106KE76L
 | Murata Manufacturing Co Ltd | AVAILABLE EU
RoHS : Compliant | | 8,570
|
Interstate Connecting Components | 62GB12E1412PE760
| Amphenol PCD | 62GB | | 0
|
62GB16F1608PE760
| Amphenol PCD | 62GB | | 0
|
62GB56T0802SE760
| Amphenol PCD | 62GB | | 0
|
62GB56T1608SE760771
| Amphenol PCD | 62GB | | 0
|
62GB56T2016PE760
| Amphenol PCD | 62GB | | 0
|
62GB56T2221PE760
| Amphenol PCD | 62GB | | 0
|
62GB56T2461PE760
| Amphenol PCD | 62GB | | 0
|
62GB56TG1404PE760771
| Amphenol PCD | 62GB | | 0
|
62GB56TG1626SE760
| Amphenol PCD | 62GB | | 0
|
62GB56TG2204SE760771
| Amphenol PCD | 62GB | | 0
|
62GB12E0833SE760
| Amphenol PCD | 62GB | | 0
|
62GB12E1210SE760
| Amphenol PCD | 62GB | | 0
|
62GB12E2255PE760771
| Amphenol PCD | 62GB | | 0
|
62GB16F1007SE760771
| Amphenol PCD | 62GB | | 0
|
62GB16F2255SE760771
| Amphenol PCD | 62GB | | 0
|
PEI Genesis | 62GB-50T10-07PE-760-771
| Amphenol Corporation | | 1 : $42.63
10 : $36.94
25 : $32.6
50 : $29.17
100 : $0.0
|
| 84
|
62GB-56TG08-02SE-760-714
| Amphenol Corporation | | 1 : $0.0
10 : $0.0
25 : $0.0
50 : $0.0
100 : $0.0
|
| 0
|
62GB-12E10-07SE-760-LC
| Amphenol Corporation | | 1 : $0.0
10 : $0.0
25 : $0.0
50 : $0.0
100 : $0.0
|
| 0
|
62GB-16F10-07SE-760-771
| Amphenol Corporation | | 1 : $0.0
10 : $0.0
25 : $0.0
50 : $0.0
100 : $0.0
|
| 0
|
62GB-56T10-07SE-760-771
| Amphenol Corporation |
RoHS : Compliant | 1 : $0.0
10 : $0.0
25 : $0.0
50 : $0.0
100 : $0.0
|
| 0
|
UE76A202000T
| Amphenol Corporation | | 1 : $0.0
10 : $0.0
25 : $0.0
50 : $0.0
100 : $0.0
|
| 0
|
UE76-3GA22-3D00T
| Amphenol Corporation | | 1 : $0.0
10 : $0.0
25 : $0.0
50 : $0.0
100 : $0.0
|
| 0
|
UE76-A20-3000T
| Amphenol Corporation |
RoHS : Compliant | 1 : $0.0
10 : $0.0
25 : $0.0
50 : $0.0
100 : $0.0
|
| 0
|
FFA.1E.760.CNS
| LEMO connectors | | 1 : $0.0
10 : $0.0
25 : $0.0
50 : $0.0
100 : $0.0
|
| 0
|
FFA.2E.765.CNS
| LEMO connectors | | 1 : $0.0
10 : $0.0
25 : $0.0
50 : $0.0
100 : $0.0
|
| 0
|
UE76-3GA20-5600T
| Amphenol Corporation | | 1 : $0.0
10 : $0.0
25 : $0.0
50 : $0.0
100 : $0.0
|
| 0
|
62GB-56T10-06PE-760
| Amphenol Corporation |
RoHS : Compliant | 1 : $0.0
10 : $0.0
25 : $0.0
50 : $0.0
100 : $0.0
|
| 0
|
62GB-51T10-06SE-760-LC
| Amphenol Corporation | | 1 : $0.0
10 : $0.0
25 : $0.0
50 : $0.0
100 : $0.0
|
| 0
|
UE76A205000T
| Amphenol Corporation | | 1 : $0.0
10 : $0.0
25 : $0.0
50 : $0.0
100 : $0.0
|
| 0
|
FFA.2E.760.CNS
| LEMO connectors | | 1 : $0.0
10 : $0.0
25 : $0.0
50 : $0.0
100 : $0.0
|
| 0
|
Powell Electronics | E76198-000
| TE Connectivity | Labels and Industrial Warning Signs
RoHS : Compliant | 20 : $3.79
90 : $3.72
200 : $3.65
400 : $3.59
2,000 : $3.52
|
| 3,300
|
E76065-000
| TE Connectivity | Wire & Cable | 2,000 : $4.83
5,000 : $3.91
10,000 : $3.52
25,000 : $3.21
|
| 323
|
62GB-50T10-07PE-760-771
| Amphenol Corporation | 62GB 7C 7#20 PIN PLUG BZ | 1 : $35.19
10 : $34.11
25 : $32.12
50 : $30.36
|
| 55
|
FFA.1E.760.CNS
| LEMO connectors | COLLET 1K DIAM 5.6 - 6 | | 3
|
Chip 1 Exchange | GRM21BR70J106KE76L
| Murata Manufacturing Co Ltd | INSTOCK
RoHS : Compliant | | 2,895
|
AFE7686IABJ
 | Texas Instruments | INSTOCK
RoHS : Compliant | | 1,534
|
E76D350VGS472MP54C
| | INSTOCK | | 187
|
E76D101VGS102MP54C
| | INSTOCK | | 7
|
Avnet Abacus | E76198-000
| TE Connectivity | (Alt: E76198-000)
RoHS : Compliant | | 0
|
E76962-000
| TE Connectivity | (Alt: E76962-000)
RoHS : Compliant | | 0
|
654E7683I3T
| CTS Corporation | - Tape and Reel (Alt: 654E7683I3T)
RoHS : Compliant | | 0
|
MDBE09PE760
| Amphenol Corporation | D Sub Connector Standard Plug MDB Series 9 Contacts DE Solder (Alt: MDBE09PE760)
RoHS : Compliant | | 0
|
B41550E7689Q
| TDK Corporation | Cap Aluminum 68000uF 40V 10 to 30 769 X 1057mm Screw Terminal Aluminum Cylindrical Can 0004 (Alt: B41550E7689Q000)
RoHS : Compliant | | 0
|
UE76A202001T
| Amphenol Corporation | Conn SFP RCP 20 POS 08mm Solder RA SMD TR - Tape and Reel (Alt: UE76A202001T)
RoHS : Compliant | | 0
|
P0805E7680BBT
| Vishay Intertechnologies | - Tape and Reel (Alt: P0805E7680BBT)
RoHS : Not Compliant | | 0
|
P0603E7681BBT
| Vishay Intertechnologies | SMD Chip Resistor 768 kOhm 01 125 mW 0603 1608 Metric Thin Film - Tape and Reel (Alt: P0603E7681BBT)
RoHS : Not Compliant | | 0
|
UE76-A20-2000T
| Amphenol Corporation | Pluggable IO Connector SFP 20 Contacts 1 x 1 Single Surface Mount Right Angle - Tape and Reel (Alt: UE76-A20-2000T)
RoHS : Compliant | | 0
|
UE763GA206600T
| Amphenol Corporation | Connector SFP Receptacle 20 Position 08mm Right Angle Surface Mount TR - Tape and Reel (Alt: UE763GA206600T)
RoHS : Compliant | | 0
|
RP73PF1E76K8BTD
| TE Connectivity | (Alt: 7-2176307-7)
RoHS : Compliant | | 0
|
P-0603E7681BSTS
| Vishay Intertechnologies | (Alt: P-0603E7681BSTS)
RoHS : Compliant | | 0
|
PTN0603E7682BST1
| Vishay Intertechnologies | SMD Chip Resistor 768 kohm 01 150 mW 0603 1608 Metric Thin Film Precision PTN Series - Tape and Reel (Alt: PTN0603E7682BST1)
RoHS : Compliant | | 0
|
MCT06030E7682BP500
| Vishay Intertechnologies | - Tape and Reel (Alt: MCT06030E7682BP500)
RoHS : Compliant | | 0
|
MMA02040E7680DB100
| Vishay Intertechnologies | Surface Mount MELF Resistor 768 Ohm 05 250 mW 0204 3715 Metric Metal Film Thin Film - Tape and Reel (Alt: MMA02040E7680DB100)
RoHS : Compliant | | 0
|
Avnet Asia | M55342K12B9E76RTSV
| Vishay Intertechnologies | SMD Chip Resistor, 9.76 kohm, ? 1%, 100 mW, 0603 [1608 Metric], Thin Film, Established Reliability (Alt: M55342K12B9E76RTSV)
RoHS : Not Compliant | | 0
|
UE76-A20-2000T
| Amphenol Corporation | Pluggable I/O Connector, SFP+, 20 Contacts, 1 x 1 (Single), Surface Mount Right Angle (Alt: UE76-A20-2000T)
RoHS : Compliant | 150,000 : $0.24118
75,000 : $0.24699
30,000 : $0.25309
15,000 : $0.25949
9,000 : $0.26623
6,000 : $0.27333
3,000 : $0.29286
|
| 0
|
UE76A202000T
| Amphenol Corporation | (Alt: UE76A202000T)
RoHS : Compliant | | 0
|
UE76A202000T
| Amphenol Corporation | Pluggable I/O Connector, SFP+, 20 Contacts, 1 x 1 (Single), Surface Mount Right Angle (Alt: UE76A202000T)
RoHS : Compliant | | 0
|
UE76-3GA22-3800T
| Amphenol Corporation | (Alt: UE76-3GA22-3800T)
RoHS : Compliant | | 0
|
UE76-A20-5000T
| Amphenol Corporation | SFP+ CONNECTOR (Alt: UE76-A20-5000T)
RoHS : Compliant | | 0
|
UE76-A20-3000T
| Amphenol Corporation | Conn SFP RCP 20 POS 0.8mm Solder RA SMD 20 Terminal 1 Port T/R (Alt: UE76-A20-3000T)
RoHS : Compliant | | 0
|
MCT06030E7682BP100
| Vishay Intertechnologies | (Alt: MCT06030E7682BP100)
RoHS : Compliant | | 0
|
UE76A203010T
| Amphenol Corporation | (Alt: UE76A203010T)
RoHS : Compliant | | 0
|
UE76-3GA20-6600T
| Amphenol Corporation | Connector SFP Receptacle 20 Position 0.8mm Right Angle Surface Mount T/R (Alt: UE76-3GA20-6600T)
RoHS : Compliant | | 0
|
UE76-3GA20-2600T
| Amphenol Corporation | Connector SFP Receptacle 20 Position 0.8mm Right Angle Surface Mount T/R (Alt: UE76-3GA20-2600T)
RoHS : Compliant | | 0
|
E763556
| Elo Touch Solutions Inc | (Alt: E763556)
RoHS : Compliant | | 0
|
MDB-E09PE-765
| Amphenol Corporation | (Alt: MDB-E09PE-765)
RoHS : Compliant | | 0
|
UE763GA202600T
| Amphenol Corporation | Connector SFP Receptacle 20 Position 0.8mm Right Angle Surface Mount T/R (Alt: UE763GA202600T)
RoHS : Compliant | | 0
|
Avnet Silica | EV88E76A
| Microchip Technology Inc | EVBLAN7801EDS (Alt: EV88E76A)
RoHS : Compliant | | 0
|
MT53E768M16D1ZW-046 AIT:C
| Micron Technology Inc | DRAM LPDDR4 12 Gbit 2133 GHz TFBGA 200 Pins (Alt: MT53E768M16D1ZW-046 AIT:C)
RoHS : Compliant | | 0
|
MT53E768M64D4HJ-046 AAT:C
| Micron Technology Inc | DRAM Mobile LPDDR4 48 Gbit 768M x 64bit 2133 GHz TFBGA 556 Pins (Alt: MT53E768M64D4HJ-046 AAT:C)
RoHS : Compliant | | 0
|
MT53E768M32D2ZW-046 AUT:C
| Micron Technology Inc | DRAM Mobile LPDDR4 24 Gbit 768M x 32bit 2133 GHz TFBGA 200 Pins (Alt: MT53E768M32D2ZW-046 AUT:C)
RoHS : Compliant | | 0
|
SIT8008BI-11-33E-76.800000G
| SiTime Corporation | Silicon Oscillator 68MHz 33V 15pF 4Pin QFN TR (Alt: SIT8008BI-11-33E-76.800000G)
RoHS : Compliant | | 0
|
MT53E768M64D4HJ-046 AUT:C TR
| Micron Technology Inc | LPDDR4 48GBIT 64 556841 TFBGA 4 UT (Alt: MT53E768M64D4HJ-046 AUT:C TR)
RoHS : Compliant | | 0
|
MT53E768M64D4HJ-046 AAT:C TR
| Micron Technology Inc | LPDDR4 48GBIT 64 556841 TFBGA 4 AT (Alt: MT53E768M64D4HJ-046 AAT:C TR)
RoHS : Compliant | | 0
|
MT53E768M32D2ZW-046 AUT:C TR
| Micron Technology Inc | LPDDR4 24GBIT 32 200264 TFBGA (Alt: MT53E768M32D2ZW-046 AUT:C TR)
RoHS : Compliant | | 0
|
MT53E768M16D1ZW-046 AIT:C TR
| Micron Technology Inc | LPDDR4 12GBIT 16 200264 TFBGA 1 IT (Alt: MT53E768M16D1ZW-046 AIT:C TR)
RoHS : Compliant | | 0
|
JOYMT53E768M32D4DT-053 AIT:E TR
| Micron Technology Inc | LPDDR4 24G 768MX32 FBGA AIT QDP (Alt: MT53E768M32D4DT-053 AIT:E TR)
RoHS : Compliant | | 0
|
Master Electronics | RP73PF1E76K8BTD
| TE Connectivity | RP 1E 0.1W 76K8 0.1% 25PPM 5K RL
RoHS : Compliant | 250,000 : $0.065
150,000 : $0.0693
100,000 : $0.0695
50,000 : $0.0736
25,000 : $0.0792
10,000 : $0.0808
5,000 : $0.0813
|
| 5,000
|
1-YW-EXT-E76
| Teledyne FLIR | FLIR E76 EXTENDED WARRANTY
RoHS : Compliant | | 0
|
PROTECTPLUS-E76
| Teledyne FLIR | FLIR PROTECT+ 3 YEAR EXTEN
RoHS : Compliant | | 0
|
E761HD
| Thomas & Betts | Clamp - Channel to Beam - Length 3-1/2 Inches - Width 3-1/2 Inches - Opening 1-11/16 Inches x 1-11/16 Inches - Hot-Dip Galvanized Steel.
RoHS : Compliant | 100 : $157.96
50 : $162.12
20 : $168.36
10 : $168.78
5 : $171.12
1 : $176.01
|
| 0
|
AXE760127
| Panasonic Electronic Components | A35S(0.35mm pit
RoHS : Compliant | 5,000 : $2.81
3,750 : $2.87
2,500 : $4.22
1,250 : $8.26
|
| 0
|
FLIR-E76-80
| Teledyne FLIR | FLIR E76 ADVANCED THERMAL
RoHS : Compliant | | 0
|
SETLBKYE7.62AUOA
| C&K Switches | Key Switch
RoHS : Compliant | 560 : $6.76
420 : $6.9
280 : $9.81
140 : $18.52
|
| 0
|
1-YW-PREM-E76
| Teledyne FLIR |
RoHS : Compliant | | 0
|
RU73X1E76R8LTDF
| TE Connectivity | RU 0402 76R8 0.01% 2PPM 1K RL MOQ Reduction
RoHS : Compliant | 1,000 : $3.0
750 : $3.06
500 : $3.86
250 : $6.28
|
| 0
|
PROTECTPRO-E76
| Teledyne FLIR | FLIR PROTECT PRO 3 YEAR EX
RoHS : Compliant | | 0
|
E-764
| Thomas & Betts | Steel Channel Clip with Galv-Krom finish.
RoHS : Compliant | 50 : $34.01
38 : $34.71
25 : $44.43
13 : $69.42
|
| 0
|
FLIR-E76-42
| Teledyne FLIR | Exx-Series cameras are the first FLIR models to come with our exclusive Inspection Route Camera Option automatically enabled in the camera. Designed for thermographers who regularly inspect large numbers of objects over the course of a day FLIR Inspection Route guides the user along a pre-defined route of inspection points so they can collect images and data in a structured manner. The route begins in FLIR Thermal Studio Pro software where users build their plan using the Route Creator plugin.
RoHS : Compliant | | 0
|
FLIR-E76-DFOV-14-24
| Teledyne FLIR | FLIR E76 ADVANCED THERMAL
RoHS : Compliant | | 0
|
E76198-000
| TE Connectivity | HX-SCE-38.1-50-4
RoHS : Compliant | 2,000 : $3.35
1,500 : $3.42
1,000 : $4.96
500 : $9.4
250 : $9.42
100 : $9.45
5 : $9.48
|
| 0
|
2-YW-PREM-E76
| Teledyne FLIR |
RoHS : Compliant | | 0
|
Neutron USA | VP2316BE761MB200
| Norgren | PROP/PRESSURE VALVE ND16 16BA, PRESSURE SWITCHES | | 4
|
Pasternack Enterprises US | PE7612-8
| Pasternack Enterprises | Key Specifications, Attenuator Design: Fixed, Active/Passive: Passive, Connection Type: In-Series, Connector-In Impedance: 50 Ohms, Max Freq: 18 GHz, Nominal Attenuation: 8 dB, VSWR, Max: 1.3:1, Input Power, Max (CW): 2 Watts, Body Material: Passivated Stainless Steel, Connector-In Series: N, Connector-In Gender: Male, Connector-Out Series: N, Connector-Out Gender: Female, Max Operating Temperature: 125 deg C, Min Operating Temperature: -55 deg C. 8 dB Fixed Attenuator N-Type Male to N-Type Female Passivated Stainless Steel Body Rated 2 Watt DC to 18GHz. PE7612-8 is a 8 dB fixed attenuator from Pasternack. This 8 dB attenuator is an in-line, resistive PI attenuator pad design. This connectorized RF attenuator comes with a maximum attenuation accuracy of 0.8 dB. Our in-series coaxial 50 Ohm attenuator is manufactured to precise RF/microwave industry specifications. This passive RF attenuator can control the signal level to an ideal range, preventing signal overload in amplifiers, receivers and detectors. Make your online purchase right now to take advantage of our same-business-day shipping. The max input power rating (CW) of this RF attenuator is 2 Watts. This attenuator has a maximum VSWR of 1.3:1 and operates between -55 and 125 deg C. Our fixed radio frequency attenuator with N-type connectors is constructed with passivated stainless steel body material. The connectorized bidirectional fixed attenuator is the best solution for reducing the power levels of a signal by a fixed amount with little or no reflections. This 8 dB fixed attenuator has a gold-plated beryllium copper inner conductor. This N-type attenuator has a male gender on side 1 and a N-type female connector on side 2. Our RF attenuator is rated for a nominal attenuation value of 8 dB. The Pasternack PE7612-8 attenuator is rated for maximum frequency up to 18 GHz. This fixed coaxial attenuator is suitable for instrumentaion, precision measurements, prototyping and characterization and production systems applications. Additional dimensions, specifications, and CAD drawings for this RF attenuator are available on our downloadable PDF datasheet. Our fixed RF attenuator PE7612-8 will ship the same business day as purchased from Pasternack’s production facility. This 8 dB attenuator is part of over one million RF, microwave and millimeter wave products that ship the same business day worldwide, including custom cable assemblies. For further information on similar products, our expert technical support and knowledgeable sales team can help you get the ideal fixed attenuator that meets your requirements. | 1 : $97.99
10 : $94.07
25 : $90.15
100 : $86.23
|
| 10
|
PE7623-6
| Pasternack Enterprises | Key Specifications, Attenuator Design: Fixed, Active/Passive: Passive, Connection Type: In-Series, Connector-In Impedance: 50 Ohms, Max Freq: 18 GHz, Nominal Attenuation: 6 dB, Attenuation Accuracy, Typ: 0.5 dB, VSWR, Max: 1.3:1, Input Power, Max (CW): 5 Watts, Body Material: Black Anodized Aluminum, Connector-In Series: SMA, Connector-In Gender: Male, Connector-Out Series: SMA, Connector-Out Gender: Female, Max Operating Temperature: 125 deg C, Min Operating Temperature: -55 deg C. 6 dB Fixed Attenuator SMA Male to SMA Female Black Anodized Aluminum Heatsink Body Rated 5 Watt DC to 18 GHz. PE7623-6 is a 6 dB fixed attenuator from Pasternack. This 6 dB attenuator is an in-line, resistive PI attenuator pad design. This connectorized RF attenuator comes with a maximum attenuation accuracy of 0.8 dB. Our in-series coaxial 50 Ohm attenuator is manufactured to precise RF/microwave industry specifications. This passive RF attenuator can control the signal level to an ideal range, preventing signal overload in amplifiers, receivers and detectors. Make your online purchase right now to take advantage of our same-business-day shipping. Pasternack’s PE7623-6 in-series fixed attenuator is available with a typical attenuation accuracy of 0.5 dB. The max input power rating (CW) of this RF attenuator is 5 Watts. This attenuator has a maximum VSWR of 1.3:1 and operates between -55 and 125 deg C. Our fixed radio frequency attenuator with SMA connectors is constructed with black anodized aluminum body material. The connectorized bidirectional fixed attenuator is the best solution for reducing the power levels of a signal by a fixed amount with little or no reflections. This 6 dB fixed attenuator has a gold-plated brass inner conductor. This SMA attenuator has a male gender on side 1 and an SMA female connector on side 2. Our RF attenuator is rated for a nominal attenuation value of 6 dB. The Pasternack PE7623-6 attenuator is rated for maximum frequency up to 18 GHz. This fixed coaxial attenuator is suitable for instrumentation, precision measurements, prototyping and characterization and production systems applications. The 6 dB attenuator has a brass connector built with nickel plating. Additional dimensions, specifications, and CAD drawings for this RF attenuator are available on our downloadable PDF datasheet. Our fixed RF attenuator PE7623-6 will ship the same business day as purchased from Pasternack’s production facility. This 6 dB attenuator is part of over one million RF, microwave and millimeter wave products that ship the same business day worldwide, including custom cable assemblies. For further information on similar products, our expert technical support and knowledgeable sales team can help you get the ideal fixed attenuator that meets your requirements. | 1 : $157.99
10 : $154.83
25 : $151.67
100 : $148.51
|
| 10
|
PE7601-9
| Pasternack Enterprises | Key Specifications, Attenuator Design: Fixed, Active/Passive: Passive, Connector-In Impedance: 50 Ohms, Max Freq: 3 GHz, Nominal Attenuation: 9 dB, VSWR, Max: 1.15:1, Input Power, Max (CW): 2 Watts, Body Material: Stainless Steel, Connector-In Series: SMA, Connector-In Gender: Male, Connector-Out Series: SMA, Connector-Out Gender: Female, Max Operating Temperature: 125 deg C, Min Operating Temperature: -55 deg C. 9dB RF fixed attenuator 2W, DC to 3GHz, SMA male to female, Stainless Steel. The PE7601-9 is a fixed 9 dB attenuator from Pasternack. This 9 dB attenuator is an in-line, resistive PI attenuator pad design. Our coaxial 50 Ohm attenuator is manufactured to precise RF / microwave industry specifications. This passive RF attenuator can control the signal level to an ideal range, preventing signal overload in amplifiers, receivers and detectors. The max input power rating (CW) of this RF attenuator is 2 Watts. This passive attenuator has a maximum VSWR of 1.15:1 and operates between -55 and 125 deg C. Our radio frequency attenuator with SMA connectors is constructed with stainless steel body material. The bidirectional attenuator is the best solution for reducing the power levels of a signal by a fixed amount with little or no reflections. This SMA attenuator has a male gender on side 1 and a SMA female connector on side 2. Our RF attenuator is rated for a maximum attenuation value of 9 dB. The Pasternack PE7601-9 attenuator is rated for up to 3 GHz. This coaxial attenuator is also suitable for precision measurements, production systems, instrumentation and prototyping and characterization applications. The attenuator has a stainless steel SMA connector with gold-plated brass contact. Our fixed RF attenuator PE7601-9 is shipped same-day as purchased from Pasternack's production facility, which is certified to ISO 9001:2015. This 9 dB attenuator is part of over 40,000 RF, microwave and millimeter wave products that ship the same day worldwide, including custom cable assemblies. For further information on similar products, our expert technical support and knowledgeable sales team can help you get the ideal fixed attenuator that meets your requirements. | 1 : $31.99
25 : $30.71
50 : $29.75
100 : $29.11
|
| 9
|
PE7601-30
| Pasternack Enterprises | Key Specifications, Attenuator Design: Fixed, Active/Passive: Passive, Connector-In Impedance: 50 Ohms, Max Freq: 3 GHz, Nominal Attenuation: 30 dB, VSWR, Max: 1.15:1, Input Power, Max (CW): 2 Watts, Body Material: Stainless Steel, Connector-In Series: SMA, Connector-In Gender: Male, Connector-Out Series: SMA, Connector-Out Gender: Female, Max Operating Temperature: 125 deg C, Min Operating Temperature: -55 deg C. 30dB RF fixed attenuator 2W, DC to 3GHz, SMA male to female, Stainless Steel. The PE7601-30 is a fixed 30 dB attenuator from Pasternack. This 30 dB attenuator is an in-line, resistive PI attenuator pad design. Our coaxial 50 Ohm attenuator is manufactured to precise RF / microwave industry specifications. This passive RF attenuator can control the signal level to an ideal range, preventing signal overload in amplifiers, receivers and detectors. The max input power rating (CW) of this RF attenuator is 2 Watts. This passive attenuator has a maximum VSWR of 1.15:1 and operates between -55 and 125 deg C. Our radio frequency attenuator with SMA connectors is constructed with stainless steel body material. The bidirectional attenuator is the best solution for reducing the power levels of a signal by a fixed amount with little or no reflections. This SMA attenuator has a male gender on side 1 and a SMA female connector on side 2. Our RF attenuator is rated for a maximum attenuation value of 30 dB. The Pasternack PE7601-30 attenuator is rated for up to 3 GHz. This coaxial attenuator is also suitable for precision measurements, production systems, instrumentation and prototyping and characterization applications. The attenuator has a stainless steel SMA connector with gold-plated brass contact. Our fixed RF attenuator PE7601-30 is shipped same-day as purchased from Pasternack's production facility, which is certified to ISO 9001:2015. This 30 dB attenuator is part of over 40,000 RF, microwave and millimeter wave products that ship the same day worldwide, including custom cable assemblies. For further information on similar products, our expert technical support and knowledgeable sales team can help you get the ideal fixed attenuator that meets your requirements. | 1 : $31.99
25 : $30.71
50 : $29.75
100 : $29.11
|
| 7
|
PE7626-1
| Pasternack Enterprises | Key Specifications, Attenuator Design: Fixed, Active/Passive: Passive, Connection Type: In-Series, Connector-In Impedance: 50 Ohms, Max Freq: 18 GHz, Nominal Attenuation: 1 dB, Attenuation Accuracy, Typ: 0.8 dB, VSWR, Max: 1.3:1, Input Power, Max (CW): 10 Watts, Body Material: Black Anodized Aluminum, Connector-In Series: SMA, Connector-In Gender: Male, Connector-Out Series: SMA, Connector-Out Gender: Female, Max Operating Temperature: 125 deg C, Min Operating Temperature: -55 deg C. 1 dB Fixed Attenuator SMA Male to SMA Female Black Anodized Aluminum Heatsink Body Rated 10 Watt DC to 18 GHz. PE7626-1 is a 1 dB fixed attenuator from Pasternack. This 1 dB attenuator is an in-line, resistive PI attenuator pad design. Our in-series coaxial 50 Ohm attenuator is manufactured to precise RF/microwave industry specifications. This passive RF attenuator can control the signal level to an ideal range, preventing signal overload in amplifiers, receivers and detectors. Make your online purchase right now to take advantage of our same-business-day shipping. Pasternack’s PE7626-1 in-series fixed attenuator is available with a typical attenuation accuracy of 0.8 dB. The max input power rating (CW) of this RF attenuator is 10 Watts. This attenuator has a maximum VSWR of 1.3:1 and operates between -55 and 125 deg C. Our fixed radio frequency attenuator with SMA connectors is constructed with black anodized aluminum body material. The connectorized unidirectional fixed attenuator is the best solution for reducing the power levels of a signal by a fixed amount with little or no reflections. This 1 dB fixed attenuator has a gold-plated brass inner conductor. This SMA attenuator has a male gender on side 1 and an SMA female connector on side 2. Our RF attenuator is rated for a nominal attenuation value of 1 dB. The Pasternack PE7626-1 attenuator is rated for maximum frequency up to 18 GHz. This fixed coaxial attenuator is suitable for instrumentation, precision measurements, prototyping and characterization and production systems applications. The 1 dB attenuator has a brass connector built with nickel plating. Additional dimensions, specifications, and CAD drawings for this RF attenuator are available on our downloadable PDF datasheet. Our fixed RF attenuator PE7626-1 will ship the same business day as purchased from Pasternack’s production facility. This 1 dB attenuator is part of over one million RF, microwave and millimeter wave products that ship the same business day worldwide, including custom cable assemblies. For further information on similar products, our expert technical support and knowledgeable sales team can help you get the ideal fixed attenuator that meets your requirements. | 1 : $241.99
10 : $237.15
25 : $232.31
100 : $227.47
|
| 5
|
PE7602-5
| Pasternack Enterprises | Key Specifications, Attenuator Design: Fixed, Active/Passive: Passive, Connector-In Impedance: 50 Ohms, Max Freq: 6 GHz, Nominal Attenuation: 5 dB, VSWR, Max: 1.15:1, Input Power, Max (CW): 2 Watts, Body Material: Stainless Steel, Connector-In Series: SMA, Connector-In Gender: Male, Connector-Out Series: SMA, Connector-Out Gender: Female, Max Operating Temperature: 125 deg C, Min Operating Temperature: -55 deg C. 5dB RF fixed attenuator 2W, DC to 6GHz, SMA male to female, Stainless Steel. The PE7602-5 is a fixed 5 dB attenuator from Pasternack. This 5 dB attenuator is an in-line, resistive PI attenuator pad design. Our coaxial 50 Ohm attenuator is manufactured to precise RF / microwave industry specifications. This passive RF attenuator can control the signal level to an ideal range, preventing signal overload in amplifiers, receivers and detectors. The max input power rating (CW) of this RF attenuator is 2 Watts. This passive attenuator has a maximum VSWR of 1.15:1 and operates between -55 and 125 deg C. Our radio frequency attenuator with SMA connectors is constructed with stainless steel body material. The bidirectional attenuator is the best solution for reducing the power levels of a signal by a fixed amount with little or no reflections. This SMA attenuator has a male gender on side 1 and a SMA female connector on side 2. Our RF attenuator is rated for a maximum attenuation value of 5 dB. The Pasternack PE7602-5 attenuator is rated for up to 6 GHz. This coaxial attenuator is also suitable for precision measurements, production systems, instrumentation and prototyping and characterization applications. The attenuator has a stainless steel SMA connector with gold-plated brass contact. Our fixed RF attenuator PE7602-5 is shipped same-day as purchased from Pasternack's production facility, which is certified to ISO 9001:2015. This 5 dB attenuator is part of over 40,000 RF, microwave and millimeter wave products that ship the same day worldwide, including custom cable assemblies. For further information on similar products, our expert technical support and knowledgeable sales team can help you get the ideal fixed attenuator that meets your requirements. | 1 : $37.59
25 : $36.09
50 : $34.96
100 : $34.21
|
| 5
|
PE7612-7
| Pasternack Enterprises | Key Specifications, Attenuator Design: Fixed, Active/Passive: Passive, Connection Type: In-Series, Connector-In Impedance: 50 Ohms, Max Freq: 18 GHz, Nominal Attenuation: 7 dB, VSWR, Max: 1.3:1, Input Power, Max (CW): 2 Watts, Body Material: Passivated Stainless Steel, Connector-In Series: N, Connector-In Gender: Male, Connector-Out Series: N, Connector-Out Gender: Female, Max Operating Temperature: 125 deg C, Min Operating Temperature: -55 deg C. 7 dB Fixed Attenuator N-Type Male to N-Type Female Passivated Stainless Steel Body Rated 2 Watt DC to 18GHz. PE7612-7 is a 7 dB fixed attenuator from Pasternack. This 7 dB attenuator is an in-line, resistive PI attenuator pad design. This connectorized RF attenuator comes with a maximum attenuation accuracy of 0.8 dB. Our in-series coaxial 50 Ohm attenuator is manufactured to precise RF/microwave industry specifications. This passive RF attenuator can control the signal level to an ideal range, preventing signal overload in amplifiers, receivers and detectors. Make your online purchase right now to take advantage of our same-business-day shipping. The max input power rating (CW) of this RF attenuator is 2 Watts. This attenuator has a maximum VSWR of 1.3:1 and operates between -55 and 125 deg C. Our fixed radio frequency attenuator with N-type connectors is constructed with passivated stainless steel body material. The connectorized bidirectional fixed attenuator is the best solution for reducing the power levels of a signal by a fixed amount with little or no reflections. This 7 dB fixed attenuator has a gold-plated beryllium copper inner conductor. This N-type attenuator has a male gender on side 1 and a N-type female connector on side 2. Our RF attenuator is rated for a nominal attenuation value of 7 dB. The Pasternack PE7612-7 attenuator is rated for maximum frequency up to 18 GHz. This fixed coaxial attenuator is suitable for instrumentaion, precision measurements, prototyping and characterization and production systems applications. Additional dimensions, specifications, and CAD drawings for this RF attenuator are available on our downloadable PDF datasheet. Our fixed RF attenuator PE7612-7 will ship the same business day as purchased from Pasternack’s production facility. This 7 dB attenuator is part of over one million RF, microwave and millimeter wave products that ship the same business day worldwide, including custom cable assemblies. For further information on similar products, our expert technical support and knowledgeable sales team can help you get the ideal fixed attenuator that meets your requirements. | 1 : $97.99
10 : $94.07
25 : $90.15
100 : $86.23
|
| 4
|
PE7628-10
| Pasternack Enterprises | Key Specifications, Attenuator Design: Fixed, Active/Passive: Passive, Connection Type: In-Series, Connector-In Impedance: 50 Ohms, Max Freq: 6 GHz, Nominal Attenuation: 10 dB, Attenuation Accuracy, Typ: 0.6 dB, VSWR, Max: 1.3:1, Input Power, Max (CW): 50 Watts, Body Material: Black Anodized Aluminum, Connector-In Series: TNC, Connector-In Gender: Male, Connector-Out Series: TNC, Connector-Out Gender: Female, Max Operating Temperature: 125 deg C, Min Operating Temperature: -55 deg C. 10 dB Fixed Attenuator, TNC Male to TNC Female Black Anodized Aluminum Body Rated to 50 Watts Up to 6 GHz. PE7628-10 is a 10 dB fixed attenuator from Pasternack. This 10 dB attenuator is an in-line, resistive PI attenuator pad design. Our in-series coaxial 50 Ohm attenuator is manufactured to precise RF/microwave industry specifications. This passive RF attenuator can control the signal level to an ideal range, preventing signal overload in amplifiers, receivers and detectors. Make your online purchase right now to take advantage of our same-business-day shipping. Pasternack’s PE7628-10 in-series fixed attenuator is available with a typical attenuation accuracy of 0.6 dB. The max input power rating (CW) of this RF attenuator is 50 Watts. This attenuator has a maximum VSWR of 1.3:1 and operates between -55 and 125 deg C. Our fixed radio frequency attenuator with TNC connectors is constructed with black anodized aluminum body material. The connectorized bidirectional fixed attenuator is the best solution for reducing the power levels of a signal by a fixed amount with little or no reflections. This TNC attenuator has a male gender on side 1 and a TNC female connector on side 2. Our RF attenuator is rated for a nominal attenuation value of 10 dB. The Pasternack PE7628-10 attenuator is rated for maximum frequency up to 6 GHz. This fixed coaxial attenuator is suitable for instrumentation, precision measurements, prototyping and characterization and production systems applications. The 10 dB attenuator has a brass connector built with nickel plating. Additional dimensions, specifications, and CAD drawings for this RF attenuator are available on our downloadable PDF datasheet. Our fixed RF attenuator PE7628-10 will ship the same business day as purchased from Pasternack’s production facility. This 10 dB attenuator is part of over one million RF, microwave and millimeter wave products that ship the same business day worldwide, including custom cable assemblies. For further information on similar products, our expert technical support and knowledgeable sales team can help you get the ideal fixed attenuator that meets your requirements. | 1 : $499.0
10 : $479.04
25 : $459.08
100 : $439.12
|
| 1
|
PE7609-10
| Pasternack Enterprises | Key Specifications, Attenuator Design: Fixed, Active/Passive: Passive, Connector-In Impedance: 50 Ohms, Max Freq: 3 GHz, Nominal Attenuation: 10 dB, Attenuation Accuracy, Typ: 0.5 dB, VSWR, Max: 1.25:1, Input Power, Max (CW): 2 Watts, Body Material: Brass, Connector-In Series: TNC, Connector-In Gender: Male, Connector-Out Series: TNC, Connector-Out Gender: Female, Max Operating Temperature: 85 deg C, Min Operating Temperature: -50 deg C. 10 dB RF fixed attenuator 2W, DC to 3GHz, TNC Male to TNC Female, Brass. PE7609-10 is a fixed 10 dB attenuator from Pasternack. This 10 dB attenuator is an in-line, resistive PI attenuator pad design. Our coaxial 50 Ohm attenuator is manufactured to precise RF/microwave industry specifications. This passive RF attenuator can control the signal level to an ideal range, preventing signal overload in amplifiers, receivers and detectors. Make your online purchase right now to take advantage of our same-day shipping. Pasternack’s PE7609-10 fixed attenuator is available with a typical attenuation accuracy of 0.5 dB. The max input power rating (CW) of this RF attenuator is 2 Watts. This attenuator has a maximum VSWR of 1.25:1 and operates between -50 and 85 deg C. Our fixed radio frequency attenuator with TNC connectors is constructed with brass body material and copper-tin-zinc alloy plating. The bidirectional attenuator is the best solution for reducing the power levels of a signal by a fixed amount with little or no reflections. This 10 dB fixed attenuator has a gold-plated phosphor bronze inner conductor. This TNC attenuator has a male gender on side 1 and a TNC female connector on side 2. Our RF attenuator is rated for a maximum attenuation value of 10 dB. The Pasternack PE7609-10 attenuator is rated for up to 3 GHz. This coaxial attenuator is also suitable for precision measurements, production systems, instrumentation and prototyping and characterization applications. The 10 dB attenuator has a brass connector built with copper-tin-zinc alloy plating. Our fixed RF attenuator PE7609-10 is shipped same-day as purchased from Pasternack's production facility, which is certified to ISO 9001:2015. This 10 dB attenuator is part of over 40,000 RF, microwave and millimeter wave products that ship the same day worldwide, including custom cable assemblies. For further information on similar products, our expert technical support and knowledgeable sales team can help you get the ideal fixed attenuator that meets your requirements. | 1 : $52.99
25 : $50.34
50 : $47.69
100 : $45.57
|
| 1
|
PE7626-20
| Pasternack Enterprises | Key Specifications, Attenuator Design: Fixed, Active/Passive: Passive, Connection Type: In-Series, Connector-In Impedance: 50 Ohms, Max Freq: 18 GHz, Nominal Attenuation: 20 dB, Attenuation Accuracy, Typ: 1 dB, VSWR, Max: 1.3:1, Input Power, Max (CW): 10 Watts, Body Material: Black Anodized Aluminum, Connector-In Series: SMA, Connector-In Gender: Male, Connector-Out Series: SMA, Connector-Out Gender: Female, Max Operating Temperature: 125 deg C, Min Operating Temperature: -55 deg C. 20 dB Fixed Attenuator SMA Male to SMA Female Black Anodized Aluminum Heatsink Body Rated 10 Watt DC to 18 GHz. PE7626-20 is a 20 dB fixed attenuator from Pasternack. This 20 dB attenuator is an in-line, resistive PI attenuator pad design. Our in-series coaxial 50 Ohm attenuator is manufactured to precise RF/microwave industry specifications. This passive RF attenuator can control the signal level to an ideal range, preventing signal overload in amplifiers, receivers and detectors. Make your online purchase right now to take advantage of our same-business-day shipping. Pasternack’s PE7626-20 in-series fixed attenuator is available with a typical attenuation accuracy of 1 dB. The max input power rating (CW) of this RF attenuator is 10 Watts. This attenuator has a maximum VSWR of 1.3:1 and operates between -55 and 125 deg C. Our fixed radio frequency attenuator with SMA connectors is constructed with black anodized aluminum body material. The connectorized unidirectional fixed attenuator is the best solution for reducing the power levels of a signal by a fixed amount with little or no reflections. This 20 dB fixed attenuator has a gold-plated brass inner conductor. This SMA attenuator has a male gender on side 1 and an SMA female connector on side 2. Our RF attenuator is rated for a nominal attenuation value of 20 dB. The Pasternack PE7626-20 attenuator is rated for maximum frequency up to 18 GHz. This fixed coaxial attenuator is suitable for instrumentation, precision measurements, prototyping and characterization and production systems applications. The 20 dB attenuator has a brass connector built with nickel plating. Additional dimensions, specifications, and CAD drawings for this RF attenuator are available on our downloadable PDF datasheet. Our fixed RF attenuator PE7626-20 will ship the same business day as purchased from Pasternack’s production facility. This 20 dB attenuator is part of over one million RF, microwave and millimeter wave products that ship the same business day worldwide, including custom cable assemblies. For further information on similar products, our expert technical support and knowledgeable sales team can help you get the ideal fixed attenuator that meets your requirements. | 1 : $241.99
10 : $237.15
25 : $232.31
100 : $227.47
|
| 1
|
PE7627A-30
| Pasternack Enterprises | Key Specifications, Attenuator Design: Fixed, Active/Passive: Passive, Connection Type: In-Series, Connector-In Impedance: 50 Ohms, Max Freq: 6 GHz, Nominal Attenuation: 30 dB, Attenuation Accuracy, Typ: 0.65 dB, VSWR, Max: 1.3:1, Input Power, Max (CW): 25 Watts, Body Material: Black Anodized Aluminum, Connector-In Series: TNC, Connector-In Gender: Male, Connector-Out Series: TNC, Connector-Out Gender: Female, Max Operating Temperature: 125 deg C, Min Operating Temperature: -55 deg C. 30 dB Fixed Attenuator, TNC Male to TNC Female Black Anodized Aluminum Body Rated to 25 Watts Up to 6 GHz. PE7627A-30 is a 30 dB fixed attenuator from Pasternack. This 30 dB attenuator is an in-line, resistive PI attenuator pad design. Our in-series coaxial 50 Ohm attenuator is manufactured to precise RF/microwave industry specifications. This passive RF attenuator can control the signal level to an ideal range, preventing signal overload in amplifiers, receivers and detectors. Make your online purchase right now to take advantage of our same-business-day shipping. Pasternack’s PE7627A-30 in-series fixed attenuator is available with a typical attenuation accuracy of 0.65 dB. The max input power rating (CW) of this RF attenuator is 25 Watts. This attenuator has a maximum VSWR of 1.3:1 and operates between -55 and 125 deg C. Our fixed radio frequency attenuator with TNC connectors is constructed with black anodized aluminum body material. The connectorized bidirectional fixed attenuator is the best solution for reducing the power levels of a signal by a fixed amount with little or no reflections. This TNC attenuator has a male gender on side 1 and a TNC female connector on side 2. Our RF attenuator is rated for a nominal attenuation value of 30 dB. The Pasternack PE7627A-30 attenuator is rated for maximum frequency up to 6 GHz. This fixed coaxial attenuator is suitable for instrumentation, precision measurements, prototyping and characterization and production systems applications. The 30 dB attenuator has a brass connector built with nickel plating. Additional dimensions, specifications, and CAD drawings for this RF attenuator are available on our downloadable PDF datasheet. Our fixed RF attenuator PE7627A-30 will ship the same business day as purchased from Pasternack’s production facility. This 30 dB attenuator is part of over one million RF, microwave and millimeter wave products that ship the same business day worldwide, including custom cable assemblies. For further information on similar products, our expert technical support and knowledgeable sales team can help you get the ideal fixed attenuator that meets your requirements. | 1 : $299.0
10 : $287.04
25 : $275.08
100 : $263.12
|
| 1
|
PE7626-6
| Pasternack Enterprises | Key Specifications, Attenuator Design: Fixed, Active/Passive: Passive, Connection Type: In-Series, Connector-In Impedance: 50 Ohms, Max Freq: 18 GHz, Nominal Attenuation: 6 dB, Attenuation Accuracy, Typ: 0.8 dB, VSWR, Max: 1.3:1, Input Power, Max (CW): 10 Watts, Body Material: Black Anodized Aluminum, Connector-In Series: SMA, Connector-In Gender: Male, Connector-Out Series: SMA, Connector-Out Gender: Female, Max Operating Temperature: 125 deg C, Min Operating Temperature: -55 deg C. 6 dB Fixed Attenuator SMA Male to SMA Female Black Anodized Aluminum Heatsink Body Rated 10 Watt DC to 18 GHz. PE7626-6 is a 6 dB fixed attenuator from Pasternack. This 6 dB attenuator is an in-line, resistive PI attenuator pad design. Our in-series coaxial 50 Ohm attenuator is manufactured to precise RF/microwave industry specifications. This passive RF attenuator can control the signal level to an ideal range, preventing signal overload in amplifiers, receivers and detectors. Make your online purchase right now to take advantage of our same-business-day shipping. Pasternack’s PE7626-6 in-series fixed attenuator is available with a typical attenuation accuracy of 0.8 dB. The max input power rating (CW) of this RF attenuator is 10 Watts. This attenuator has a maximum VSWR of 1.3:1 and operates between -55 and 125 deg C. Our fixed radio frequency attenuator with SMA connectors is constructed with black anodized aluminum body material. The connectorized unidirectional fixed attenuator is the best solution for reducing the power levels of a signal by a fixed amount with little or no reflections. This 6 dB fixed attenuator has a gold-plated brass inner conductor. This SMA attenuator has a male gender on side 1 and an SMA female connector on side 2. Our RF attenuator is rated for a nominal attenuation value of 6 dB. The Pasternack PE7626-6 attenuator is rated for maximum frequency up to 18 GHz. This fixed coaxial attenuator is suitable for instrumentation, precision measurements, prototyping and characterization and production systems applications. The 6 dB attenuator has a brass connector built with nickel plating. Additional dimensions, specifications, and CAD drawings for this RF attenuator are available on our downloadable PDF datasheet. Our fixed RF attenuator PE7626-6 will ship the same business day as purchased from Pasternack’s production facility. This 6 dB attenuator is part of over one million RF, microwave and millimeter wave products that ship the same business day worldwide, including custom cable assemblies. For further information on similar products, our expert technical support and knowledgeable sales team can help you get the ideal fixed attenuator that meets your requirements. | 1 : $241.99
10 : $237.15
25 : $232.31
100 : $227.47
|
| 1
|
PE7604-30
| Pasternack Enterprises | Key Specifications, Attenuator Design: Fixed, Active/Passive: Passive, Connector-In Impedance: 50 Ohms, Max Freq: 18 GHz, Nominal Attenuation: 30 dB, VSWR, Max: 1.35:1, Input Power, Max (CW): 50 Watts, Body Material: Black Anodized Aluminum, Connector-In Series: N, Connector-In Gender: Male, Connector-Out Series: N, Connector-Out Gender: Female, Max Operating Temperature: 125 deg C, Min Operating Temperature: -55 deg C. 30dB RF fixed attenuator 50W, DC to 18GHz, N-type male to N-type female. The PE7604-30 is a fixed 30 dB attenuator from Pasternack. This 30 dB attenuator is an in-line, resistive PI attenuator pad design. Our coaxial 50 Ohm attenuator is manufactured to precise RF / microwave industry specifications. This passive RF attenuator can control the signal level to an ideal range, preventing signal overload in amplifiers, receivers and detectors. The max input power rating (CW) of this RF attenuator is 50 Watts. This passive attenuator has a maximum VSWR of 1.35:1 and operates between -55 and 125 deg C. Our radio frequency attenuator with N-type connectors is constructed with black anodized aluminum body material. The bidirectional attenuator is the best solution for reducing the power levels of a signal by a fixed amount with little or no reflections. This N-type attenuator has a male gender on side 1 and a N-type female connector on side 2. Our RF attenuator is rated for a maximum attenuation value of 30 dB. The Pasternack PE7604-30 attenuator is rated for up to 18 GHz. This coaxial attenuator is also suitable for precision measurements, production systems, instrumentation and prototyping and characterization applications. The attenuator has a black anodized aluminum N-type connector with gold-plated brass contact. Our fixed RF attenuator PE7604-30 is shipped same-day as purchased from Pasternack's production facility, which is certified to ISO 9001:2015. This 30 dB attenuator is part of over 40,000 RF, microwave and millimeter wave products that ship the same day worldwide, including custom cable assemblies. For further information on similar products, our expert technical support and knowledgeable sales team can help you get the ideal fixed attenuator that meets your requirements. | 1 : $550.0
10 : $539.0
25 : $528.0
100 : $517.0
|
| 1
|
PE7611-2
| Pasternack Enterprises | Key Specifications, Attenuator Design: Fixed, Active/Passive: Passive, Connection Type: In-Series, Connector-In Impedance: 50 Ohms, Max Freq: 18 GHz, Nominal Attenuation: 2 dB, VSWR, Max: 1.3:1, Input Power, Max (CW): 2 Watts, Body Material: Passivated Stainless Steel, Connector-In Series: SMA, Connector-In Gender: Male, Connector-Out Series: SMA, Connector-Out Gender: Female, Max Operating Temperature: 125 deg C, Min Operating Temperature: -55 deg C. 2 dB Fixed Attenuator SMA Male to SMA Female Passivated Stainless Steel Body Rated 2 Watt DC to 18GHz. PE7611-2 is a 2 dB fixed attenuator from Pasternack. This 2 dB attenuator is an in-line, resistive PI attenuator pad design. This connectorized RF attenuator comes with a maximum attenuation accuracy of 0.8 dB. Our in-series coaxial 50 Ohm attenuator is manufactured to precise RF/microwave industry specifications. This passive RF attenuator can control the signal level to an ideal range, preventing signal overload in amplifiers, receivers and detectors. Make your online purchase right now to take advantage of our same-business-day shipping. The max input power rating (CW) of this RF attenuator is 2 Watts. This attenuator has a maximum VSWR of 1.3:1 and operates between -55 and 125 deg C. Our fixed radio frequency attenuator with SMA connectors is constructed with passivated stainless steel body material. The connectorized bidirectional fixed attenuator is the best solution for reducing the power levels of a signal by a fixed amount with little or no reflections. This 2 dB fixed attenuator has a gold-plated beryllium copper inner conductor. This SMA attenuator has a male gender on side 1 and an SMA female connector on side 2. Our RF attenuator is rated for a nominal attenuation value of 2 dB. The Pasternack PE7611-2 attenuator is rated for maximum frequency up to 18 GHz. This fixed coaxial attenuator is suitable for instrumentaion, precision measurements, prototyping and characterization and production systems applications. Additional dimensions, specifications, and CAD drawings for this RF attenuator are available on our downloadable PDF datasheet. Our fixed RF attenuator PE7611-2 will ship the same business day as purchased from Pasternack’s production facility. This 2 dB attenuator is part of over one million RF, microwave and millimeter wave products that ship the same business day worldwide, including custom cable assemblies. For further information on similar products, our expert technical support and knowledgeable sales team can help you get the ideal fixed attenuator that meets your requirements. | 1 : $64.99
10 : $62.39
25 : $59.79
100 : $57.19
|
| 0
|
PE7612-10
| Pasternack Enterprises | Key Specifications, Attenuator Design: Fixed, Active/Passive: Passive, Connection Type: In-Series, Connector-In Impedance: 50 Ohms, Max Freq: 18 GHz, Nominal Attenuation: 10 dB, VSWR, Max: 1.3:1, Input Power, Max (CW): 2 Watts, Body Material: Passivated Stainless Steel, Connector-In Series: N, Connector-In Gender: Male, Connector-Out Series: N, Connector-Out Gender: Female, Max Operating Temperature: 125 deg C, Min Operating Temperature: -55 deg C. 10 dB Fixed Attenuator N-Type Male to N-Type Female Passivated Stainless Steel Body Rated 2 Watt DC to 18GHz. PE7612-10 is a 10 dB fixed attenuator from Pasternack. This 10 dB attenuator is an in-line, resistive PI attenuator pad design. This connectorized RF attenuator comes with a maximum attenuation accuracy of 0.8 dB. Our in-series coaxial 50 Ohm attenuator is manufactured to precise RF/microwave industry specifications. This passive RF attenuator can control the signal level to an ideal range, preventing signal overload in amplifiers, receivers and detectors. Make your online purchase right now to take advantage of our same-business-day shipping. The max input power rating (CW) of this RF attenuator is 2 Watts. This attenuator has a maximum VSWR of 1.3:1 and operates between -55 and 125 deg C. Our fixed radio frequency attenuator with N-type connectors is constructed with passivated stainless steel body material. The connectorized bidirectional fixed attenuator is the best solution for reducing the power levels of a signal by a fixed amount with little or no reflections. This 10 dB fixed attenuator has a gold-plated beryllium copper inner conductor. This N-type attenuator has a male gender on side 1 and a N-type female connector on side 2. Our RF attenuator is rated for a nominal attenuation value of 10 dB. The Pasternack PE7612-10 attenuator is rated for maximum frequency up to 18 GHz. This fixed coaxial attenuator is suitable for instrumentaion, precision measurements, prototyping and characterization and production systems applications. Additional dimensions, specifications, and CAD drawings for this RF attenuator are available on our downloadable PDF datasheet. Our fixed RF attenuator PE7612-10 will ship the same business day as purchased from Pasternack’s production facility. This 10 dB attenuator is part of over one million RF, microwave and millimeter wave products that ship the same business day worldwide, including custom cable assemblies. For further information on similar products, our expert technical support and knowledgeable sales team can help you get the ideal fixed attenuator that meets your requirements. | 1 : $97.99
10 : $94.07
25 : $90.15
100 : $86.23
|
| 0
|
TE Connectivity | RP73PF1E76K8BTD
| TE Connectivity | RP 1E 0.1W 76K8 0.1% 25PPM 5K RL Resistance Value: 76.8K Ω Element Type: Thin Film Resistor Type: Precision Resistor Passive Component Tolerance: .1 % Package Size Code: 0402 Surface Mount Resistor | 76.8K Ω Thin Film Precision Resistor .1 % | Part Number: RP73PF1E76K8BTD | Internal Number: 7-2176307-7 | TE Connectivity
RoHS : Compliant | 2,500 : $0.21
1,000 : $0.22
500 : $0.23
250 : $0.23
100 : $0.24
50 : $0.24
25 : $0.25
10 : $0.26
1 : $0.26
|
| 13,127
|
RQ73C1E768RBTD
| TE Connectivity | RQ 0402 768R 0.1% 10PPM 5K RL Resistance Value: 768 Ω Element Type: Thin Film Resistor Type: Precision Resistor Passive Component Tolerance: .1 % Package Size Code: 0402 Surface Mount Resistor | 768 Ω Thin Film Precision Resistor .1 % | Part Number: RQ73C1E768RBTD | Internal Number: 2-2176363-5 | TE Connectivity
RoHS : Compliant | 2,500 : $0.73
1,000 : $0.75
500 : $0.77
250 : $0.79
100 : $0.81
50 : $0.83
25 : $0.85
10 : $0.87
1 : $0.89
|
| 9,152
|
RQ73C1E76R8BTD
| TE Connectivity | RQ 0402 76R8 0.1% 10PPM 5K RL Resistance Value: 76.8 Ω Element Type: Thin Film Resistor Type: Precision Resistor Passive Component Tolerance: .1 % Package Size Code: 0402 Surface Mount Resistor | 76.8 Ω Thin Film Precision Resistor .1 % | Part Number: RQ73C1E76R8BTD | Internal Number: 2-2176362-8 | TE Connectivity
RoHS : Compliant | 2,500 : $0.73
1,000 : $0.75
500 : $0.77
250 : $0.79
100 : $0.81
50 : $0.83
25 : $0.85
10 : $0.87
1 : $0.89
|
| 7,952
|
RP73PF1E768RBTD
| TE Connectivity | RP 1E 0.1W 768R 0.1% 25PPM 5K RL Resistance Value: 768 Ω Element Type: Thin Film Resistor Type: Precision Resistor Passive Component Tolerance: .1 % Package Size Code: 0402 Surface Mount Resistor | 768 Ω Thin Film Precision Resistor .1 % | Part Number: RP73PF1E768RBTD | Internal Number: 8-2176305-3 | TE Connectivity
RoHS : Compliant | 2,500 : $0.21
1,000 : $0.22
500 : $0.23
250 : $0.23
100 : $0.24
50 : $0.24
25 : $0.25
10 : $0.26
1 : $0.26
|
| 6,505
|
RP73PF1E76R8BTD
| TE Connectivity | RP 1E 0.1W 76R8 0.1% 25PPM 5K RL Resistance Value: 76.8 Ω Element Type: Thin Film Resistor Type: Precision Resistor Passive Component Tolerance: .1 % Package Size Code: 0402 Surface Mount Resistor | 76.8 Ω Thin Film Precision Resistor .1 % | Part Number: RP73PF1E76R8BTD | Internal Number: 8-2176304-6 | TE Connectivity
RoHS : Compliant | 2,500 : $0.21
1,000 : $0.22
500 : $0.23
250 : $0.23
100 : $0.24
50 : $0.24
25 : $0.25
10 : $0.26
1 : $0.26
|
| 4,349
|
Vyrian | AFE7681IABJ
 | Texas Instruments | Analog Circuit, 1 Func, PBGA400
RoHS : Compliant | | 8,780
|
MT53E768M64D4HJ-046AIT:C
| Micron Technology Inc | LPDDR4 DRAM
RoHS : Compliant | | 6,153
|
PAFE7686ABJ
| Texas Instruments | Analog Circuit | | 5,966
|
MT53E768M64D4HJ-046AAT:B
| Micron Technology Inc | LPDDR4 DRAM
RoHS : Compliant | | 5,752
|
MT53E768M64D4HJ-046-WT-C-TR
| Micron Technology Inc | | | 5,389
|
MT53E768M32D2NP-046-WT-B
| Micron Technology Inc | | | 3,969
|
MT29E768G08EEHBBJ4-3-B
| Micron Technology Inc | | | 3,938
|
MT53E768M64D4SQ-046-AAT-A-TR
| Micron Technology Inc | | | 3,372
|
MT53E768M64D4HJ-046-AIT-C-TR
| Micron Technology Inc | | | 3,259
|
MT53E768M32D4DT-046AUT:E
| Micron Technology Inc | LPDDR4 DRAM, 768MX32, CMOS, PBGA200
RoHS : Compliant | | 3,173
|
MT53E768M32D4DT-046-AUT-E-TR
| Micron Technology Inc | | | 2,957
|
MT29E768G08EEHBBJ4-3ES-B-TR
| Micron Technology Inc | | | 2,880
|
MT53E768M64D4SQ-046-AAT-A
| Micron Technology Inc | | | 2,707
|
MT53E768M32D4DT-053-AIT-E-TR
| Micron Technology Inc | | | 2,599
|
MT53E768M64D4HJ-046-AIT-A-TR
| Micron Technology Inc | | | 2,478
|
Win Source Electronics | UE76-3GA20-3600T
| Amphenol Corporation | CONN SFP RCPT 20POS SLD R/A SMD / 20 Position SFP Receptacle Connector Solder Surface Mount, Right Angle
RoHS : Compliant | 127 : $2.3637
95 : $2.6364
74 : $2.7273
54 : $2.8182
35 : $2.9091
15 : $3.5455
|
| 55,176
|
20455-040E-76
| I-PEX Co Ltd | CABLINE-VS RECEPTACLE 40P / 40 Position FPC Connector Contacts, Top 0.020" (0.50mm) Surface Mount, Right Angle
RoHS : Compliant | 515 : $0.5865
385 : $0.6542
300 : $0.6767
215 : $0.6993
140 : $0.7219
60 : $0.8797
|
| 25,535
|
20455-050E-76
| I-PEX Co Ltd | 76 Position FFC - FPC Receptacle Assembly
RoHS : Compliant | 520 : $0.652
390 : $0.7272
300 : $0.7523
220 : $0.7774
140 : $0.8025
60 : $0.978
|
| 20,000
|
20455-030E-76
| I-PEX Co Ltd | CABLINE-VS RECE 30P / Position Connector
RoHS : Compliant | 114 : $2.6321
86 : $2.9358
66 : $3.0371
48 : $3.1383
31 : $3.2395
13 : $3.9482
|
| 9,880
|
MT53E768M32D4DT-053 WT:E
| Micron Technology Inc | IC DRAM 24GBIT 1.866GHZ 200VFBGA | 6 : $59.091
4 : $65.9091
3 : $68.1819
2 : $70.4546
1 : $72.7273
|
| 1,700
|
MT53E768M32D4DT-053 AIT:E
| Micron Technology Inc | IC DRAM 24GBIT 1.866GHZ 200VFBGA | 2 : $258.9474
1 : $269.4737
|
| 1,300
|
MT53E768M32D4DT-046 AIT:E
| Micron Technology Inc | IC DRAM 24GBIT 2.133GHZ 200VFBGA | 5 : $77.0823
4 : $85.9765
3 : $88.9411
2 : $91.9059
1 : $94.8706
|
| 520
|
AFE7686IABJ
| Texas Instruments | IC AFE 4 CHAN 14BIT 400FCBGA / 4 Channel AFE 14 Bit 400-FCBGA (17x17)
RoHS : Compliant | | 500
|
AFE7689IABJ
| Texas Instruments | PROTOTYPE | | 200
|
AFE7683IABJ
 | Texas Instruments | ANALOG FRONT END / 4 Channel AFE 14 Bit 400-FCBGA (17x17)
RoHS : Compliant | | 150
|
British ▼ 
English
Chinese
German
Japanese
Russian
Korean
Spanish
French
Italian
Portuguese
Polish
Vietnamese
Indian
Mexican
New Zealand