EPS50F15 Price, Distributor, Stock

EPS50F15 Distributor

Distributor

Part #

Manufacturer

Description

Price

Qty.
BuyNow

PEI Genesis

EPS.00.250.NTN

LEMO connectors

RoHS : Compliant

1 : $17.87
10 : $17.25
25 : $16.11
50 : $0.0
100 : $0.0

Avnet Silica

Y-PG-FP4-E-PS

Renesas Electronics Corporation

Power Supply unit for PGFP4 PGFP5 78K IECUBE RL78IECUBE (Alt: Y-PG-FP4-E-PS)
RoHS : Compliant

ADAPTER BOARD AVNET MSC SM2S-MB-EPS

Allied Vision Technologies GmbH

Adapter Board for MSC SM2SMBEP5 (Alt: 15936)
RoHS : Compliant

Braemac Americas-Symmetry

TMC2208 SILENTSTEPSTICK

Analog Devices Inc

Stepper Driver Board for 2-Phase Motors

1 : $10.0

TMC-SILENTSTEPSTICK-SPI

Analog Devices Inc

TMC silentStepStick SPI

1 : $7.99

M/E-PSW-FX-02(SC)-NA

Lantronix Inc

MINI 10/100BASETX TO 100BASEFX SWITCH, SC MM 2KM W/NA

1 : $105.12

TMC5160SILENTSTEPSTICK

Analog Devices Inc

TMC5160 Stepper Driver Board, 9-36V, 3A RMS

1 : $17.5

M/GE-PSW-SX-01(LC)

Lantronix Inc

1 : $309.75

ECCO

EPS-3001/8INBL48INB

120 : $0.211

9,217

EPS-2001/2INBL48INB

40 : $0.706

1,290

EPS-2003/4INBL48INB

40 : $0.632

Pasternack Enterprises US

PEPSGPS1001

Pasternack Enterprises

Key Specifications, Connector Series In: TNC, Connector Gender In: Female, Minimum Frequency: 1.1 GHz, Maximum Frequency: 1.7 GHz, Number of Output Ports: 4 Port, Impedance: 50 Ohm. 1-to-4 GNSS splitter, Smart Power Switching, Low Noise, IP67, TNC Female. The PEPSGPS1001 4-way TNC power divider, also known as a TNC coaxial power splitter, is rated for a minimum frequency of 1.1 GHz and a maximum frequency of 1.7 GHz. This Pasternack TNC power divider/coaxial splitter has a 50 Ohm impedance. Our GNSS splitter features a TNC female input connector. This 4-way GNSS splitter intelligently manages power from multiple receivers by prioritizing a primary port within a defined voltage range and automatically switching to alternate ports if conditions fall outside specifications, ensuring deterministic operation. It also enables antenna fault detection by signaling low current draw across all ports when a failure occurs. Pasternack’s PEPSGPS1001 power splitter has an aluminum housing. This TNC power divider has a 0.5 dB maximum amplitude balance. This GNSS splitter has a typical and maximum phase balance of 2 degrees and 5 degrees, respectively. Additional power divider specifications and dimensions can be found on its PDF specification datasheet and CAD drawings above. The maximum input VSWR of this TNC splitter/divider is 1.5:1, and the minimum isolation is 42 dB. The PEPSGPS1001 power divider from Pasternack is ideal for applications such as drone manufacturing qa, uav integration benches, gnss test labs, antenna comparison testing, robotics development, autonomous vehicle labs and fleet hardware validation. Our GNSS splitter is built to operate at temperatures ranging from -40 to 85 deg C. This low noise splitter has a length of 4.6 inches, a width of 4.3 inches, and a weight of 0.6 lbs. Our TNC power divider is part of over one million RF, microwave, and millimeter wave components supplied by Pasternack. This 4-way TNC female GNSS splitter can be bought and shipped worldwide on the same business day as with Pasternack’s other in-stock RF parts. Make your online purchase right now to take advantage of our same-business-day shipping. For further information on similar products, our expert technical support and knowledgeable sales team can help you get the ideal power divider for your requirements.

1 : $644.6
10 : $631.71
25 : $618.82
100 : $605.92

PEPSGPS1000

Pasternack Enterprises

Key Specifications, Connector Series In: TNC, Connector Gender In: Female, Minimum Frequency: 1.1 GHz, Maximum Frequency: 1.7 GHz, Number of Output Ports: 2 Port, Impedance: 50 Ohm. 1-to-2 GNSS splitter, Smart Power Switching, Low Noise, IP67, TNC Female. The PEPSGPS1000 2-way TNC power divider, also known as a TNC coaxial power splitter, is rated for a minimum frequency of 1.1 GHz and a maximum frequency of 1.7 GHz. This Pasternack TNC power divider/coaxial splitter has a 50 Ohm impedance. Our GNSS splitter features a TNC female input connector. This 2-way GNSS splitter intelligently manages power from multiple receivers by prioritizing a primary port within a defined voltage range and automatically switching to alternate ports if conditions fall outside specifications, ensuring deterministic operation. It also enables antenna fault detection by signaling low current draw across all ports when a failure occurs. Pasternack’s PEPSGPS1000 power splitter has an aluminum housing. This TNC power divider has a 0.5 dB maximum amplitude balance. This GNSS splitter has a typical and maximum phase balance of 2 degrees and 5 degrees, respectively. Additional power divider specifications and dimensions can be found on its PDF specification datasheet and CAD drawings above. The maximum input VSWR of this TNC splitter/divider is 1.5:1, and the minimum isolation is 47 dB. The PEPSGPS1000 power divider from Pasternack is ideal for applications such as drone manufacturing qa, uav integration benches, gnss test labs, antenna comparison testing, robotics development, autonomous vehicle labs and fleet hardware validation. Our GNSS splitter is built to operate at temperatures ranging from -40 to 85 deg C. This low noise splitter has a length of 4.6 inches, a width of 4.3 inches, and a weight of 0.6 lbs. Our TNC power divider is part of over one million RF, microwave, and millimeter wave components supplied by Pasternack. This 2-way TNC female GNSS splitter can be bought and shipped worldwide on the same business day as with Pasternack’s other in-stock RF parts. Make your online purchase right now to take advantage of our same-business-day shipping. For further information on similar products, our expert technical support and knowledgeable sales team can help you get the ideal power divider for your requirements.

1 : $519.35
10 : $508.96
25 : $498.58
100 : $488.19