| Distributor | Part # | Manufacturer | Description | Price | Qty.
BuyNow |
TME | PE-1008CD820KTT
| YAGEO Corporation | Inductor: wire; SMD; 1008; 82nH; ±10%; 2.92x2.79x2.29mm; 140mΩ | 8,000 : $0.111
1,600 : $0.121
|
| 19,200
 |
PE1206JRF070R39L
| YAGEO Corporation | Resistor: thick film; 390mΩ; 1206; 250mW; ±5%; PE; -55÷170°C
RoHS : Compliant | 12,000 : $0.079
4,000 : $0.087
|
| 12,000
|
6TPE100MI
| Panasonic Electronic Components | Capacitor: tantalum-polymer; low ESR; 100uF; 6.3VDC; 2800mA; SMD
RoHS : Compliant | 250 : $0.78
125 : $0.8
100 : $0.81
75 : $0.85
50 : $0.9
25 : $1.04
10 : $1.29
5 : $1.49
1 : $1.83
|
| 16
|
HVMLPE1625
| Knowles Precision Devices | Capacitor: polypropylene | | 15
|
6TPE120MAZB
| Panasonic Electronic Components | Capacitor: tantalum-polymer; low ESR; 120uF; 6.3VDC; 1400mA; SMD
RoHS : Compliant | 4,000 : $0.539
2,000 : $0.558
1,000 : $0.588
500 : $0.625
100 : $0.729
50 : $0.783
25 : $0.844
10 : $0.939
1 : $1.55
|
| 10
|
4TPE150MAZB
| Panasonic Electronic Components | Capacitor: tantalum-polymer; low ESR; 150uF; 4VDC; 1400mA; SMD
RoHS : Compliant | 10,000 : $0.458
6,000 : $0.471
4,000 : $0.482
2,000 : $0.5
1,000 : $0.519
|
| 0
 |
867PE/12
| Beta Electric | Screwdriver bit: hex key; HEX 12mm; Socket size: 10mm | | 0
|
6TPE100MVB
| Panasonic Electronic Components | Capacitor: tantalum-polymer; 100uF; 6.3VDC; 1300mA; SMD; ±20%; 45mΩ
RoHS : Compliant | 6,000 : $0.458
2,000 : $0.477
1,000 : $0.494
500 : $0.52
250 : $0.557
100 : $0.614
50 : $0.665
10 : $0.814
5 : $0.902
1 : $1.41
|
| 0
|
6TPE150MF
| Panasonic Electronic Components | Capacitor: tantalum-polymer; low ESR; 150uF; 6.3VDC; 3100mA; SMD
RoHS : Compliant | | 0
|
OSG5GA5PE1A
| OptoSupply Limited | LED; 4.8mm; green; 2180÷3000mcd; 140°; Front: convex; 2.8÷3.6VDC | 10,000 : $0.091
5,000 : $0.095
2,000 : $0.12
1,000 : $0.176
500 : $0.246
250 : $0.351
100 : $0.491
50 : $0.562
10 : $0.632
1 : $0.702
|
| 0
|
PE12C2T15NO
| Carlo Gavazzi Holding AG | Sensor: photoelectric; Range: 15m; NPN / NO; transmitter-receiver | 10 : $50.07
5 : $53.92
1 : $57.78
|
| 0
|
PE1605C4A6-AU_R1_000A1
| PanJit Semiconductor | Diode: TVS; 6V; 1A; unidirectional; SOT23-6L; Ch: 4
RoHS : Compliant | | 0
|
PE1605C4A6_R1_00001
| PanJit Semiconductor | Diode: TVS; 6V; 1A; unidirectional; SOT23-6L; Ch: 4
RoHS : Compliant | | 0
|
PE1605C4C6-AU_R1_000A1
| PanJit Semiconductor | Diode: TVS; 6V; 1A; unidirectional; SOT363; Ch: 4
RoHS : Compliant | | 0
|
KW TATPE1.RU-Q2T1-A01A21-1
| ams OSRAM Group | LED; white; SMD; Case (mm): 0603; 900÷1600mlm; 165°; 5mA; Front: flat | | 0
|
ComSIT USA | PE1249G
| IBE | AVAILABLE EU | | 8,253
|
PE1134G
| IBE | AVAILABLE EU | | 8,171
|
XDPE1B284B0000XTMA1
| Infineon Technologies AG | AVAILABLE EU | | 2,431
|
PE1149G
| IBE | AVAILABLE EU | | 3,927
|
PUI | PE1-1A-DC-1
| | | | 1,979
|
Component Electronics, Inc | RPE123Z5U474M050V
| Murata Manufacturing Co Ltd | IN STOCK SHIP TODAY
RoHS : Compliant | 1,000 : $0.4
100 : $0.46
1 : $0.62
|
| 8,660
|
RPE132901X7R102K50V
| Murata Manufacturing Co Ltd | IN STOCK SHIP TODAY | 1,000 : $0.2
100 : $0.23
1 : $0.31
|
| 6,000
|
RPE122C0G8R2C100V
| Murata Manufacturing Co Ltd | IN STOCK SHIP TODAY | | 5,500
|
RPE121911X7R333K50M6083-101
| Murata Manufacturing Co Ltd | IN STOCK SHIP TODAY | 1,000 : $0.15
100 : $0.17
1 : $0.23
|
| 2,800
|
55PE106
| SCI | IN STOCK SHIP TODAY | 1,000 : $2.5
100 : $2.88
1 : $3.85
|
| 2,668
|
RPE131-911X7R104K50M6286N500
| Murata Manufacturing Co Ltd | IN STOCK SHIP TODAY | | 2,408
|
QPE1113-S
| QT Optoelectronics | IN STOCK SHIP TODAY | | 2,000
|
MBA0204-50-1%-PE-1K62
| Vishay Beyschlag | IN STOCK SHIP TODAY | 1,000 : $0.15
100 : $0.17
1 : $0.23
|
| 570
|
MBA0204-25-1%-PE-10K
| Vishay Beyschlag | IN STOCK SHIP TODAY | 1,000 : $0.15
100 : $0.17
1 : $0.23
|
| 369
|
RPE122-901Z5U104M050V
| Murata Manufacturing Co Ltd | IN STOCK SHIP TODAY | 1,000 : $0.5
100 : $0.58
1 : $0.77
|
| 250
|
RPE121911X7R102K050V
| Murata Manufacturing Co Ltd | IN STOCK SHIP TODAY | 1,000 : $0.15
100 : $0.17
1 : $0.23
|
| 150
|
IPE-1431-27
| Vishay Dale | IN STOCK SHIP TODAY | | 100
|
DA130PE1-00
| Dell Computer | IN STOCK SHIP TODAY | 1,000 : $32.5
100 : $37.5
1 : $50.0
|
| 9
|
SRPE-125-9-C
| Thomas & Betts | IN STOCK SHIP TODAY | | 5
|
PE1145BV-106.25MHZ
| Pletronics Inc | IN STOCK SHIP TODAY | | 3
|
ECCO | PE-10-LDPE-YELLOW-5000
| StockCap | | | 5,400
|
Flip Electronics | 2SK3354(03)-ZP-E1-AY
| Renesas Electronics Corporation | Stock | | 20,000
|
2SK3812(0)-ZP-E1-AY
| Renesas Electronics Corporation | Stock
RoHS : Compliant | | 1,600
|
2SK3811(0)-ZP-E1-AZ
| Renesas Electronics Corporation | Stock
RoHS : Compliant | | 800
|
Pasternack Enterprises US | PE1024
| Pasternack Enterprises | Key Specifications. Primary Application Audio/Video/Data Cable Family/Type D-Subminiature Part Type Dust Cap/Cover Connector Series 15-Pin D-Subminiature. DB15/HD26 Protective Cover for Male Connectors, Pkg/10., Pasternack’s PE1024 is a protective cover that protects unused DB15/HD26 male connectors, cables, or any expensive equipment from physical damage, dirt, dust, and other contaminants. This black-colored cover is made of ROHS-compliant PVC. Our connector protective cover attaches easily and stays in place with a snug friction fit. The PE1024 connector protective cover from Pasternack comes in a package of 10 pieces. This cover is suitable for device management, data networks, instrument control, and serial data transmission applications. Our protective cover is also available for the most commonly used male and female D-sub interfaces. Pasternack has one of the largest in-stock selections of connector protective covers for international and domestic orders. Make your online purchase right now to take advantage of our same-business-day shipping. For further information on similar products, our expert technical support and knowledgeable sales team can help you get the ideal DB15/HD26 protective cover for your requirements. | 1 : $17.99
25 : $17.09
50 : $16.19
100 : $15.47
|
| 29
|
PE1015-3
| Pasternack Enterprises | | 1 : $8.87
25 : $8.43
50 : $7.98
100 : $7.63
|
| 16
|
PE15A1009
| Pasternack Enterprises | Key Specifications, Gain: 34 dB, Power Output: 11 dBm P1dB, Frequency, Min: 10 MHz, Frequency, Max: 3 GHz, Noise Figure, Max: 1.7 dB, Design: Low Noise, Voltage, DC Max: 15 Volts, Current, DC Max: 105 mA, Connector Series: SMA. 25 dBm IP3, 1.4 dB NF, 11 dBm P1dB, 10 MHz to 3 GHz, Low Noise Amplifier, 34 dB Gain, SMA. PE15A1009 low noise amplifier from Pasternack (also known as LNA) is featured in our extensive in-stock RF amplifier selection. Our connectorized low noise amplifier uses SMA connectors at 50 Ohm. This SMA low noise amplifier has a minimum frequency of 10 MHz and maximum frequency of 3 GHz. The significantly low noise figure of this radio frequency amplifier is 1.7 dB with a typical gain of 34 dB. LNA amplifier PE15A1009 is rated at 15 Volts DC maximum and 105 mA. Our low noise radio frequency LNA amp is part of over 40,000 RF, microwave and millimeter wave components available from Pasternack. This coaxial millimeter wave low noise amplifier can ship worldwide the same day of the purchase as with our other available RF parts. | 1 : $1,280.0
5 : $1,228.8
10 : $1,177.6
|
| 16
|
PE1017-10
| Pasternack Enterprises | . Launch Pin & Dielectric for 0.91mm (0.036 Inch) Field Replaceable Connector, 6.02mm (0.237 Inch) Pin Length. Pasternack's PE1017-10 Launch pin & dielectric for 0.91mm (.036inch) field replaceable connector, 6.02mm (0.237inch) pin length is part of our complete line of Connector Launch Accessories available for same-day shipping. This range of accessories includes Glass bead Transitions, Launch Pin & Dielectric Transitions and Pin/Tab Transitions to Microstrip and Stripline Circuits in conjunction with our line of field replaceable flange connectors. These accessories are designed to be compatible with our line of Field Replaceable Connectors to ensure optimal electrical performance for PCB test applications. They are available in commonly used pin diameters of .009”, .012”, .015”, .018”, .020” and .036” and in a variety of lengths and sizes depending on the application. Our PE1017-10 Launch pin & dielectric for 0.91mm (.036inch) field replaceable connector, 6.02mm (0.237inch) pin length datasheet specifications are shown below in this PDF. Pasternack’s broad catalog of RF, microwave and millimeter wave connectors allows designers to configure and customize their signal connections however they like. Whether the need is to provide an I/O for a board design, or simply create a custom cable assembly configuration, Pasternack has the right connector for the job. Pasternack can also expertly build your custom cable assemblies for you and ship same day. | 1 : $8.01
25 : $7.61
50 : $7.21
100 : $6.89
|
| 11
|
PE15A1003
| Pasternack Enterprises | Key Specifications, Gain: 38 dB, Power Output: 13 dBm Psat, Frequency, Min: 8 GHz, Frequency, Max: 12 GHz, Design: Low Noise, Voltage, DC Max: 13 Volts, Current, DC Max: 250 mA, Connector Series: SMA. 2.2 dB NF, 13 dBm Psat, 8 GHz to 12 GHz, Low Noise Amplifier, 38 dB Gain, SMA. PE15A1003 low noise amplifier from Pasternack (also known as LNA) is featured in our extensive in-stock RF amplifier selection. Our connectorized low noise amplifier uses SMA connectors at 50 Ohm. This SMA low noise amplifier has a minimum frequency of 8 GHz and maximum frequency of 12 GHz. LNA amplifier PE15A1003 is rated at 13 Volts DC maximum and 250 mA. Our low noise radio frequency LNA amp is part of over 40,000 RF, microwave and millimeter wave components available from Pasternack. This coaxial millimeter wave low noise amplifier can ship worldwide the same day of the purchase as with our other available RF parts. | 1 : $3,480.0
5 : $3,340.8
10 : $3,201.6
|
| 9
|
PE1525
| Pasternack Enterprises | Key Specifications, Power Output: 15 dBm P1dB, Frequency, Min: 200 MHz, Frequency, Max: 2.5 GHz, Gain: 22 dB, Noise Figure, Max: 6 dB, Voltage, DC Min: 9 Volts, Voltage, DC Max: 15 Volts, Connector Series: SMA. 15 dBm P1dB, 200 MHz to 2.5 GHz, Gain Block Amplifier, 19 dB Gain, 6 dB NF, SMA. PE1525 RF gain block amplifier from Pasternack is featured in our extensive in-stock RF amplifier selection. Our connectorized gain block RF amplifier uses SMA connectors. This SMA gain block amplifier has a minimum frequency of 200 MHz, a maximum frequency of 2.5 GHz and a typical gain of 22 dB. Our radio frequency gain block amp PE1525 is part of over 40,000 RF, microwave and millimeter wave components available from Pasternack. This coaxial gain block amplifier can ship worldwide the same day of the purchase as with our other available RF parts. | 1 : $269.99
10 : $259.19
25 : $248.39
|
| 9
|
PE1637
| Pasternack Enterprises | Key Specifications, RF Port Connector Series: SMA, DC Port Connector Series: BNC, Minimum Frequency: 0.05 MHz, Maximum Frequency: 26 GHz, RF Port Maximum VSWR: 1.8:1, Maximum Voltage: 25 Volts, Maximum DC Current: 750 mA. 50 KHz to 26 GHz SMA Broadband Bias Tee, Rated to 750 mA and 25 Volts, DC BNC Connector. PE1637 bias tee (also called bias T) has a SMA connector RF port that is female gender. This broadband bias tee is available with 50 Ohm RF/DC port connector impedance. This Pasternack female SMA bias tee design is rated for a minimum frequency of 0.05 MHz and a maximum frequency of 26 GHz. Our RF coaxial bias tee has a SMA DC port connector with a female gender. This SMA bias tee / T is rated for a max. DC voltage of 25 Volts and a max. current of 750 mA. The PE1637 bias T with SMA connector series for RF port is designed with a maximum VSWR of 1.8:1 and a RF to bias isolation typical of 50 dB. Pasternack's radio frequency bias tee is one of over 40,000 RF, microwave and millimeter wave components supplied by us. Our coaxial SMA bias T can be purchased and will be shipped worldwide the same-day as with other in-stock Pasternack RF parts. The Pasternack's PE1637 bias tee, a three-port network, is used to adjust the DC bias point of some electrical components without affecting other components. The Pasternack's PE1637 broadband bias tee from Pasternack operates at temperature ranging from 15°C to 30°C. Our SMA high-reliability bias tee is generally used to insert DC power into an AC signal to power remote antenna amplifiers or other devices. The PE1637 SMA bias tee has typical and maximum insertion loss of 1.4 dB and 3 dB respectively. Our coaxial broadband bias tee is just part of more than one million RF, microwave and millimeter wave components we carry in-stock. This bias tee with SMA RF port is ready to buy and be shipped worldwide. For further information on similar products, our expert technical support and trained sales team can get you to the perfect bias tee as per your requirement. | 1 : $2,380.0
5 : $2,284.8
10 : $2,189.6
25 : $2,094.4
|
| 6
|
PE-118SR-BULK
| Pasternack Enterprises | Key Specifications. Generic Name 118 Semi-rigid Flex Type Semi-Rigid Impedance 50 Ohm Dielectric Type PTFE (LD) No. of Shields 1 Attenuation at 1 Ghz. 12.5 dB Power, Max at 1 Ghz. 500 Watts Frequency, Max 46 GHz Max Operating Temperature 200 deg C Center Conductor Type Solid Inner Conductor, Number of Strands 1 Minimum Bend Radius, One Time 0.4 in Coax Type Coax. Semirigid Coax Cable 0.118 Diameter With Copper Outer Conductor. PE-118SR-BULK part number from Pasternack is a 118 Semi-rigid coax cable that is semi-rigid. Pasternack PE-118SR semi-rigid coax cable is 50 Ohm and has a PTFE (LD) dielectric. PE-118SR coax has a shield count of 1 and the maximum frequency for this Pasternack cable is 46 GHz. PE-118SR coax cable has an attenuation at 1 GHz of 12.5 dB and a maximum power of 500 watts at 1 GHz. Pasternack 118 Semi-rigid coax cables are part of over 40,000 RF, microwave and millimeter wave components. PE-118SR cables and our other RF parts are available for same day shipping worldwide. Custom RF cable assemblies using PE-118SR or other coax can be built and shipped same day as well. | 1 : $80.29
25 : $76.28
50 : $72.26
100 : $69.05
|
| 5
|
PE1V11006
| Pasternack Enterprises | | 1 : $175.99
25 : $167.19
50 : $158.39
100 : $151.35
|
| 2
|
PE11S3904
| Pasternack Enterprises | Key Specifications, Design: USB, Mode: Integer/Fractional, Reference: Internal (External Optional), Min Frequency: 21 GHz, Max Frequency: 24 GHz, Supply Current 1, Typ: 470 mA, Output Power, Min: -17 dBm, Control/Tuning Interface: USB, Package Family (PCB, Coaxial): Coaxial, Reference Input Connector Series: MMCX, Reference Input Connector Gender: Female. USB PLL Frequency Synthesizer, 21 GHz - 24 GHz, -17 dBm Pout, 50 MHz Reference and SMA output., Pasternack's PE11S3904 RF frequency Synthesizer module Phase Locked Loop (PLL) operates on the frequency range from 21 GHz to 24 GHz. With pout of > -17 dBm this RF synthesizer includes USB 2.0 interface that is powered and command controlled directly by a host PC and a SMA Female output connector. The PLL USB Frequency Synthesizer with Phase Lock Indicator is VISA compliant which enables seamless cross platform use. The USB Type A - Male connector is used for both Power and Control and the synthesizer can be GUI managed via Windows®, Macintosh®, or Linux® platforms, or with SCPI compliant VISA commands (downloadable user manual), or with other system design software such as LabVIEW®. This high quality USB synthesizer has a Phase Noise of -88 dBc/Hz @ 100kHz offset. Pasternack offers a line of experts who can assist you with technical support for your PLL SMA Female RF frequency Synthesizer module or any other rf frequency synthesizer in our inventory. Contact our USB synthesizer technical experts or download the PE11S3904 pdf technical data sheet for frequency synthesizer circuit CAD drawing, functional block diagram, and typical performance data. Manufactured to the highest international standards your PE11S3904 USB synthesizer ships same business day of order. Designed with USB control the frequency Synthesizer comes with Coaxial package and supports MMCX Female connectors. The RF Synthesizer Module comes complete with a USB Type A - Male and an SMA to MMCX plug cable. The module operates across a wide temperature range of 0°C to 55°C Pasternack's USB frequency Synthesizer specialists are on the line and ready to help you with any inquiries you may have on the 21 GHz to 24 GHz -17dBm Synthesizer. Order your USB Phase Lock Indicator, 21 GHz to 24 GHz, -17dBm Pout, with 50MHz Internal (External Optional) Reference, -88 dBc/Hz Phase Noise, MMCX Female Divider Out Connector RF frequency synthesizer today. There is no MOQ (minimum order quantity) and the PE11S3904 RF frequency Synthesizer ships same day from our warehouse. | 1 : $4,700.0
5 : $4,512.0
10 : $4,324.0
|
| 2
|
PE15A1085
| Pasternack Enterprises | Key Specifications, Gain: 50 dB, Power Output: 19 dBm P1dB, Frequency, Min: 50 MHz, Frequency, Max: 8 GHz, Noise Figure, Max: 3 dB, Design: Low Noise, Voltage, DC Max: 15 Volts, Current, DC Max: 290 mA, Connector Series: SMA. 2.0 dB NF Low Noise Amplifier, Operating from 50 MHz to 8 GHz with 50 dB Gain, 19 dBm P1dB and SMA. The PE15A1085 low noise amplifier from Pasternack (also known as LNA) is featured in our extensive in-stock RF amplifier selection. Our connectorized low noise amplifier uses SMA connectors at 50 Ohm. This DC powered low noise amplifier has a female gender configuration for input and output ports. This SMA low noise amplifier has a minimum frequency of 50 MHz and maximum frequency of 8 GHz. The PE15A1085 low noise amplifier has 1.9:1 of typical VSWR (Voltage Standing Wave Ratio). This radio frequency amplifier has impressive typical performance that includes a very low noise figure of 2 dB, small signal gain of 50 dB, and gain flatness of 2 dB. Our 007 ADCC powered low noise amplifier is designed to operate on a 9/15 VDC voltage. The PE15A1085 007 low noise amplifier operates over the temperature range of -40 deg C and 85 deg C. This low noise amplifier has 19 dB of typical 1dB compression power and a maximum RF input power of -10 dBm. The Pasternack low noise amplifier features 240 mA typical DC current. Additional specs for this low noise amplifier can be found on its PDF specification datasheet and CAD drawings above. Our DC powered low noise radio frequency amplifier is part of over 40,000 RF, microwave, and millimeter wave components available from Pasternack. This coaxial low noise amplifier can ship worldwide the same day of the purchase as with our other available RF parts. For further information on similar products, our expert technical support and knowledgeable sales team can help you get the perfect 007 DC powered low noise amplifier for your requirement. | 1 : $2,080.0
5 : $1,996.8
10 : $1,913.6
25 : $1,830.4
|
| 1
|
PE15A7007
| Pasternack Enterprises | | 1 : $10,200.0
5 : $9,792.0
10 : $9,384.0
25 : $8,976.0
|
| 1
|
PE1349
| Pasternack Enterprises | Key Specifications, Connector Series 1: N, Connector Gender 1: Female, Connector Polarity 1: Standard, Connector Impedance 1: 50 Ohm, Connector Series 2: N, Connector Gender 2: Female, Connector Polarity 2: Standard, Connector Impedance 2: 50 Ohm, Frequency, Min: DC, Frequency, Max: 18 GHz, Adapter Body Style: Straight, Connector Mount Method 1: None, Connector Body Material 1: Brass, Connector Body Plating 1: Tri-Metal, Connector Mount Method 2: Bulkhead, Connector Body Material 2: Brass, Connector Body Plating 2: Tri-Metal. Hermetically Sealed N Female to N Female Bulkhead Mount Adapter, 18GHz VSWR1.35, MIL-STD 348B. Type N adapter PE1349 is one of over 40,000 available RF, microwave and millimeter wave components from Pasternack. The RF adapter comes with 50 Ohm impedance and maximum VSWR of 1.35:1. This hermetically sealed RF adapter has a female to female gender configuration which provides easier connections in tighter spaces. Our type N to type N adapter is an in-series coaxial adapter design. This 50 Ohm type N adapter is precision manufactured to RF components industry specifications and has a maximum frequency of 18 GHz. Type N female to type N female adapter is one of the many RF components that ship same business day as they are ordered. PE1349 female type N to female type N adapter has a straight body. This Pasternack straight type N coax adapter is an in-line RF adapter. This hermetically sealed 1.35:1 RF adapters is often used to enable connections between two connector types that would otherwise not mate. Our RF adapter comes with a 18 GHz and is ideal to use in RF and microwave systems. Our RF adapters has 1.5 in. length, 0.83 in. width and 0.06 lbs weight. Our type N female to type N female adapter PE1349 is shipped from our facility certified to ISO 9001:2015 the same day as purchased. The high-quality adapter from Pasternack is made from brass connector body and has a beryllium copper center contact. Our type N radio frequency adapter can also be used to protect connectors on expensive equipment where the number of connect/ disconnect cycles is high. This female RF adapter has an operating temperature range of -65 to 165 degrees C. This MIL-STD-202, Method 206 hermetically sealed RF adapter has a maximum insertion loss of 0.21 dB and prevents the leakage of gases, making it suitable for high pressure or vacuum applications or whenever an airtight seal is required. This type N to type N radio frequency adapter is part of over 40,000 RF, microwave and millimeter wave products that ship the same day worldwide, including custom cable assemblies. For further information on similar products, our expert technical support and knowledgeable sales team can help you get the high-quality 18 GHz radio frequency adapter that meets your requirements. | 1 : $252.99
10 : $247.93
25 : $242.87
100 : $237.81
|
| 0
|
PE15A63003
| Pasternack Enterprises | Key Specifications, Gain: 29 dB, Power Output: 23 dBm P1dB, Frequency, Min: 30 MHz, Frequency, Max: 1.5 GHz, Noise Figure, Max: 2 dB, Design: Input Protected Low Noise, Voltage, DC Max: 15 Volts, Current, DC Max: 190 mA, Connector Series: SMA. 1.6 dB NF Input Protected Low Noise Amplifier, Operating from 30 MHz to 1.5 GHz with 29 dB Gain, 23 dBm P1dB and SMA. PE15A63003 input protected low noise amplifier from Pasternack (also known as LNA) is featured in our extensive in-stock RF amplifier selection. Our connectorized input protected low noise amplifier uses SMA connectors at 50 Ohm. This SMA input protected low noise amplifier has a minimum frequency of 30 MHz and maximum frequency of 1.5 GHz. The significantly low noise figure of this radio frequency amplifier is 2 dB with a typical gain of 29 dB. input protected LNA amplifier PE15A63003 is rated at 15 Volts DC maximum and 190 mA. Our input protected low noise radio frequency LNA amp is part of over 40,000 RF, microwave and millimeter wave components available from Pasternack. This coaxial millimeter wave input protected low noise amplifier can ship worldwide the same day of the purchase as with our other available RF parts. | 1 : $1,100.0
5 : $1,056.0
10 : $1,012.0
|
| 0
|
PE15A1054
| Pasternack Enterprises | Key Specifications, Gain: 35 dB, Power Output: 20 dBm P1dB, Frequency, Min: 10 MHz, Frequency, Max: 1.3 GHz, Noise Figure, Max: 2 dB, Design: Low Noise, Voltage, DC Max: 15 Volts, Current, DC Max: 180 mA, Connector Series: SMA. 1.5 dB NF Low Noise Amplifier, Operating from 10 MHz to 1.3 GHz with 35 dB Gain, 20 dBm P1dB and SMA. PE15A1054 low noise amplifier from Pasternack (also known as LNA) is featured in our extensive in-stock RF amplifier selection. Our connectorized low noise amplifier uses SMA connectors at 50 Ohm. This SMA low noise amplifier has a minimum frequency of 10 MHz and maximum frequency of 1.3 GHz. The significantly low noise figure of this radio frequency amplifier is 2 dB with a typical gain of 35 dB. LNA amplifier PE15A1054 is rated at 15 Volts DC maximum and 180 mA. Our low noise radio frequency LNA amp is part of over 40,000 RF, microwave and millimeter wave components available from Pasternack. This coaxial millimeter wave low noise amplifier can ship worldwide the same day of the purchase as with our other available RF parts. | | 0
|
British ▼ 
English
Chinese
German
Japanese
Russian
Korean
Spanish
French
Italian
Portuguese
Polish
Vietnamese
Indian
Mexican
New Zealand