 |
Electronic Components Datasheet Search |
|
|
Electronic Components Datasheet Search |
|
S180-WP-R Distributor |
| Distributor | Part # | Manufacturer | Description | Price | Qty. BuyNow | |
 Avnet Americas | SQS180ENW-T1_GE3 | Vishay Intertechnologies | Automotive N-Channel 40 V (D-S) 175C MOSFET PowerPAK 1212-8SLW - Tape and Reel (Alt: SQS180ENW-T1_GE3) RoHS : Not Compliant |
| 3,000 | |
| 600S180FW250XT | Kyocera AVX Components | MLC 600 - Tape and Reel (Alt: 600S180FW250XT) RoHS : Not Compliant |
| 2,000 | ||
ASPI-6045S-180M-T | Abracon Corporation | - Tape and Reel (Alt: ASPI-6045S-180M-T) RoHS : Compliant |
| 1,500 | ||
| 16SVPS180M | Panasonic Electronic Components | Polymer Aluminium Electrolytic Capacitor, 180 uF, 16 V, Radial Can - SMD, 0.029 ohm - Tape and Reel (Alt: 16SVPS180M) RoHS : Compliant |
| 1,000 | ||
| AHDPBS-18-002 | Amphenol Corporation | - Boxed Product (Development Kits) (Alt: AHDPBS-18-002) RoHS : Compliant |
| 68 | ||
| RWR74S1800FRS73 | Vishay Intertechnologies | Through Hole Resistor, 180 ohm, RWR Series, 5 W, ? 1%, Axial Leaded, Wirewound, ? 20ppm/?C - Tape and Reel (Alt: RWR74S1800FRS73) RoHS : Not Compliant |
| 0 | ||
| RWR81S1800BRRSL | Vishay Intertechnologies | - Custom Tape W/Leader (Alt: RWR81S1800BRRSL) RoHS : Not Compliant |
| 0 | ||
| RWR89S1800DRB12 | Vishay Intertechnologies | Through Hole Resistor, 180 ohm, RWR Series, 3 W, ? 0.5%, Axial Leaded, Wirewound, ? 20ppm/?C - Bulk (Alt: RWR89S1800DRB12) RoHS : Not Compliant |
| 0 | ||
| MTMM-103-05-F-S-180 | Samtec Inc | Pin Header, Board-to-Board, Wire-to-Board, 1 Rows, 3 Contacts, Through Hole, MTMM Series - Bulk (Alt: MTMM-103-05-F-S-180) RoHS : Compliant |
| 0 | ||
| MMSDT-02-28-S-18.00-S-K | Samtec Inc | Cable Assembly Discrete Wire 28AWG 0.46m 4 Position Discrete Wire Housing Receptacle - Bulk (Alt: MMSDT-02-28-S-18.00-S-K) RoHS : Compliant |
| 0 | ||
| NPI63LS180MTRF | NIC Components Corp | - Tape and Reel (Alt: NPI63LS180MTRF) RoHS : Compliant |
| 0 | ||
| NRCAH100GS1803TRQYF | NIC Components Corp | THICK FILM CHIP RESISTORS - Tape and Reel (Alt: NRCAH100GS1803TRQYF) RoHS : Not Compliant | 0 | |||
| HCMD-04-S-18.00-01-S | Samtec Inc | - Bulk (Alt: HCMD-04-S-18.00-01-S) RoHS : Compliant |
| 0 | ||
| HCMD-07-S-18.00-02 | Samtec Inc | - Bulk (Alt: HCMD-07-S-18.00-02) RoHS : Compliant |
| 0 | ||
| HCSD-25-S-18.00-01-N-B25 | Samtec Inc | Cable Assembly Ribbon 0.457m 50 POS IDC RCP - Bulk (Alt: HCSD-25-S-18.00-01-N-B25) RoHS : Compliant |
| 0 | ||
 Newark | MTSW-102-07-T-S-180 | Samtec Inc | Hdr, Brd-To-Brd, 2.54Mm, 2Pos; |Samtec, Inc. MTSW-102-07-T-S-180 RoHS : Compliant |
| 2,793 | |
| MTMM-103-05-S-S-180 | Samtec Inc | Hdr, Brd-To-Brd, 2Mm, 3Pos; |Samtec, Inc. MTMM-103-05-S-S-180 RoHS : Compliant |
| 1,536 | ||
| MF-LS180 | Bourns Inc | Ptc Resettable Fuse, 1.8A, 24V, Strap; |Bourns, Inc. MF-LS180 RoHS : Compliant |
| 1,300 | ||
| MTMM-104-05-T-S-180 | Samtec Inc | Hdr, Brd-To-Brd, 2Mm, 4Pos; |Samtec, Inc. MTMM-104-05-T-S-180 RoHS : Compliant |
| 1,213 | ||
| MTMM-105-06-T-S-180 | Samtec Inc | Hdr, Brd-To-Brd, 2Mm, 5Pos; |Samtec, Inc. MTMM-105-06-T-S-180 RoHS : Compliant |
| 1,039 | ||
| MTMM-106-05-T-S-180 | Samtec Inc | Hdr, Brd-To-Brd, 2Mm, 6Pos; |Samtec, Inc. MTMM-106-05-T-S-180 RoHS : Compliant |
| 855 | ||
| MTMM-107-06-L-S-180 | Samtec Inc | Hdr, Brd-To-Brd, 2Mm, 7Pos; |Samtec, Inc. MTMM-107-06-L-S-180 RoHS : Compliant |
| 759 | ||
| MTLW-107-22-G-S-180 | Samtec Inc | Hdr, Brd-To-Brd, 2.54Mm, 7Pos; |Samtec, Inc. MTLW-107-22-G-S-180 RoHS : Compliant |
| 689 | ||
| MTMS-102-51-S-S-180 | Samtec Inc | Hdr, Brd-To-Brd, 1.27Mm, 2Pos; |Samtec, Inc. MTMS-102-51-S-S-180 RoHS : Compliant |
| 303 | ||
| HMTSW-112-07-G-S-180 | Samtec Inc | Hdr, Brd-To-Brd, 2.54Mm, 12Pos; |Samtec, Inc. HMTSW-112-07-G-S-180 RoHS : Compliant |
| 264 | ||
| HMTSW-108-08-T-S-180-RA | Samtec Inc | Pin Header, Hmtsw-108-08-T-S-180-Ra; |Samtec, Inc. HMTSW-108-08-T-S-180-RA RoHS : Compliant |
| 255 | ||
| TW-20-02-T-S-180-090 | Samtec Inc | Conn Stack Brd, 2Mm, 20Pos, Hdr; |Samtec, Inc. TW-20-02-T-S-180-090 RoHS : Compliant |
| 135 | ||
| AIO-BDPCS-18-01 | Amphenol Industrial Operations | Blanking Plug, Dome, 18Mm, Gray, Nyl; Plug Material:Nylon 6 (Polyamide 6); Thread Size:Pg16; External Diameter:18Mm; Product Range:Guardxcel Series |Amphenol Industrial AIO-BDPCS-18-01 RoHS : Not Compliant |
| 50 | ||
| ADZS-180PWM-SAM | Analog Devices Inc | Pwm Probing Board, Arm, Cortex-M4; |Analog Devices, Inc. ADZS-180PWM-SAM RoHS : Compliant |
| 3 | ||
| FG16-05S.180.84 | Davies Molding LLC | Handle W/ Pb /E-Stop Sw/Led, 180Mm; Fixing Centers:180Mm; Handle Material:Nylon 6 (Polyamide 6), Pvc (Polyvinylchloride); Thread Size - Metric:-; Thread Size - Imperial:-; Product Range:Fg16 Series Rohs Compliant: Yes |Davies Molding FG16-05S.180.84 RoHS : Compliant |
| 1 | ||
 RS | AHDPBS-18-002 | Amphenol Sine Systems | BACKSHELL, WTA, SHELL SIZE 18, COMPRESSION NUT. CABLE DIA. RANGE 14.5MM-18.0MM |
| 54 | |
| AHDMBS-18-002 | Amphenol Sine Systems | BACKSHELL, SIZE 18, AHDM SERIES, 2 PC. |
| 25 | ||
| ACS180-04S-01A8-4 (3AXD50000864690) | ABB Group | MICRO DRIVE, 3-PHASE, 0.5HP, 480VAC, R0 FRAME, N1/IP21, ACS150 SERIES |
| 10 | ||
| S8VS-18024A (S8VS18024A) | OMRON Industrial Automation | AC-DC POWER SUPPLY, 24V, 7.5A, 85-264V, ENCLOSED, PFC, 180W, S8VS SERIES |
| 8 | ||
| BAM00RY (BOS 18,0-HW-1) | Balluff Inc | L-BRACKET FOR BOS 18KF/KW |
| 6 | ||
| ACS180-04S-03A3-4 (3AXD50000864713) | ABB Group | AC DRIVE, 3-PHASE, 380-480V, 1.5HP, FRAME R1, ACS311, ACS310 SERIES |
| 4 | ||
| NEBV-Z4WA2L-P-E-0.5-N-M8G3-S1 (8047673) | Festo | CONNECTING CABLE, FIELD DEVICE TO CONTROLLER, ZC 2/2 TO M8A 3/2, .5M |
| 4 | ||
| BAM00F8 (BES 18,0-KB-3-F) | Balluff Inc | BES - INDUCTIVE SENSOR ACCESSORIES, BES 18.0-KB-3-F |
| 3 | ||
| ACS180-04S-07A8-1 (3AXD50000864614) | ABB Group | AC DRIVE, 1-PHASE, 200-240V, 2HP, FRAME R2, ACS311, ACS310 SERIES |
| 3 | ||
| ACS180-04S-06A9-1 (3AXD50000864607) | ABB Group | COMAPCT MICRO DRIVE, 1HP, 200VAC, EMC FILTER, 0.75KW, 4.3A IP20, ACS55 SERIES |
| 3 | ||
HWS1800T-36 | TDK-Lambda Corporation | POWER SUPPLY, AC-DC,36V,50A,85-265V IN, ENCLOSED, PANEL MOUNT, PFC, HWS1800T SERIES RoHS : Compliant |
| 2 | ||
| ACS180-04S-04A0-4 (3AXD50000864720) | ABB Group | MICRO DRIVE, 3-PHASE, 480VAC, 1.5HP, 03U, N1/IP21, R1 FRAME, ACS150 SERIES |
| 2 | ||
| 01002-7954 (XH25D-SS-1800-ABZC-28V/V-SM18) | BEI Sensors | ENCODER, INCREMENTAL, OPTICAL, 5-28VDC, 3/8" SHAFT, 1800 CYCLES/TURN, 2 CHANNEL |
| 2 | ||
| ACS180-04S-02A4-2 (3AXD50000857388) | ABB Group | AC DRIVE, 3-PHASE, 200-240V, 0.5HP, FRAME R0, ACS311, ACS310 SERIES |
| 1 | ||
| ACS180-04S-03A7-2 (3AXD50000857395) | ABB Group | AC DRIVE, 3-PHASE, 200-240V, 0.75HP, FRAME R0, ACS311, ACS310 SERIES |
| 1 | ||
 Microchip Technology Inc | MCP1826S-1802E/AB | Microchip Technology Inc | 1.0A LDO, TO-220, Projected EOL: 2036-09-05 RoHS : Compliant |
| 18,340 | |
| MCP1755S-1802E/MC | Microchip Technology Inc | 16v, 300 mA low quiescent current LDO with shutdown, DFN, Projected EOL: 2040-12-26 RoHS : Compliant |
| 17,100 | ||
| MCP1825S-1802E/AB | Microchip Technology Inc | 500mA LOW VOLTAGE, LOW IQ LDO, TO-220, Projected EOL: 2036-09-05 RoHS : Compliant |
| 15,150 | ||
| MCP1825S-1802E/DBVAO | Microchip Technology Inc | 500mA LOW VOLTAGE, LOW IQ LDO, SOT-223, Projected EOL: 2051-01-09 RoHS : Compliant |
| 13,182 | ||
MCP1826S-1802E/EB | Microchip Technology Inc | 1.0A LDO, DDPAK, Projected EOL: 2036-09-05 RoHS : Compliant |
| 10,900 | ||
MCP1827S-1802E/EB | Microchip Technology Inc | 1.5A LDO Regulator, DDPAK, Projected EOL: 2036-09-06 RoHS : Compliant |
| 9,850 | ||
| MCP1825S-1802E/EB | Microchip Technology Inc | 500MA LOW VOLTAGE, LOW IQ LDO, DDPAK, Projected EOL: 2036-09-05 RoHS : Compliant |
| 4,100 | ||
MCP1826S-1802E/DB | Microchip Technology Inc | 1.0A LDO, SOT-223, Projected EOL: 2036-09-05 RoHS : Compliant |
| 3,869 | ||
| MCP1827S-1802E/AB | Microchip Technology Inc | 1.5A LDO Regulator, TO-220, Projected EOL: 2036-09-06 RoHS : Compliant |
| 1,000 | ||
| MCP1825S-1802E/DB | Microchip Technology Inc | 500mA LOW VOLTAGE, LOW IQ LDO, SOT-223, Projected EOL: 2036-09-05 RoHS : Compliant |
| 58 | ||
| TFS180N | Microchip Technology Inc | TFS180N, Projected EOL: 2050-07-31 - Contact for Pricing RoHS : Compliant | 0 | |||
| UPS180/TR13 | Microchip Technology Inc | Small-Signal Schottky _ 1 PMT (D0216), Projected EOL: 2051-02-02 RoHS : Compliant |
| 0 | ||
| UPS180E3/TR7 | Microchip Technology Inc | Small-Signal Schottky _ 1 PMT (D0216), Projected EOL: 2051-02-02 RoHS : Compliant |
| 0 | ||
| PL611S-18-001 | Microchip Technology Inc | Programmable Clock, SOT-23, Projected EOL: 2044-08-04 - Contact for Pricing RoHS : Compliant | 0 | |||
| UFS180GE3/TR13 | Microchip Technology Inc | UFR,FRR _ SMBG (DO-215AA), Projected EOL: 2049-02-05 RoHS : Compliant |
| 0 | ||
 Rochester Electronics | SN65LVDS180PWRQ1 | Texas Instruments | IC INTERFACE Transceiver LVDS 400Mbps 3V - 3.6V 14-SOP T/R RoHS : Compliant |
| 14,918 | |
SN65LVDS180D | Texas Instruments | IC INTERFACE Transceiver LVDS 150Mbps, 400Mbps 3V - 3.6V 14-SOIC Tube RoHS : Compliant |
| 5,886 | ||
SN74AS1805N | Texas Instruments | NOR Gate, AS Series, 6-Func, 2-Input, TTL, PDIP20 RoHS : Not Compliant |
| 477 | ||
EP2S180F1020C4 | Altera Corporation | FPGAs Stratix II 9383040b 1.15V 742 I/O 1020-BGA Tray RoHS : Not Compliant |
| 2 | ||
| EP2S180F1508C3 | Altera Corporation | FPGAs Stratix II 9383040b 1.15V 1170 I/O 1508-BGA Tray RoHS : Not Compliant |
| 2 | ||
| EP2S180F1508C5 | Altera Corporation | FPGAs Stratix II 9383040b 1.15V 1170 I/O 1508-BGA Tray RoHS : Not Compliant |
| 1,030 | ||
| EP2S180F1508C4N | Altera Corporation | FPGAs Stratix II 9383040b 1.15V 1170 I/O 1508-BGA Tray RoHS : Compliant |
| 7 | ||
| MPXS3015VMS180 | Freescale Semiconductor | IC MCU e200z7d 32Bit 1 Core FLASH 1.5MB (1.5M x 8) 150MHz 473-BGA Tray RoHS : Compliant |
| 468 | ||
| DS1801 | Maxim Integrated Products | Pot Digital 2 Element 65 POS 45 kOhm 2.7V ±20% 14-DIP Tube RoHS : Not Compliant |
| 2,159 | ||
| DS1801E-02V+ | Maxim Integrated Products | DS1801 Dual Audio Taper Potentiometer RoHS : Compliant |
| 10,176 | ||
| DS1804X-010/T&R | Maxim Integrated Products | Pot Digital 1 Element 100 POS 10 kOhm 2.7V ±20% 8-SOIC T/R RoHS : Not Compliant |
| 3,299 | ||
| DS1804X-050/T&R | Maxim Integrated Products | DS1804 NV Trimmer Potentiometer RoHS : Not Compliant |
| 9,865 | ||
| DS1804X-100/T&R | Maxim Integrated Products | DS1804 NV Trimmer Potentiometer RoHS : Not Compliant |
| 4,392 | ||
| DS1805Z-010 | Maxim Integrated Products | Pot Digital 1 Element 256 POS 10 kOhm 2.7V ±20% 16-SOIC Tube RoHS : Not Compliant |
| 8,079 | ||
| DZ2S180C0L | ROHM Semiconductor | Zener Diode Single 18V 150mW SOD-523 T/R RoHS : Compliant |
| 9,878,774 | ||
 Sager | MTMM-103-05-F-S-180 | Samtec Inc | Headers & Wire Housings Variable Post Height Header Strips, 2.00 mm Pitch RoHS : Compliant |
| 0 | |
| MTMM-104-06-T-S-180 | Samtec Inc | Headers & Wire Housings RoHS : Compliant | 0 | |||
| MTMM-106-14-G-S-180 | Samtec Inc | Headers & Wire Housings RoHS : Compliant | 0 | |||
| MMSD-04-20-S-18.00-S-K | Samtec Inc | Rectangular Cable Assemblies RoHS : Compliant | 0 | |||
| MMSD-10-22-S-18.00-S-P | Samtec Inc | Rectangular Cable Assemblies RoHS : Compliant | 0 | |||
| MMSDT-02-28-S-18.00-S-K | Samtec Inc | Rectangular Cable Assemblies Mini-Mate Cable Assembly, Teflon Cable, 0.100 Pitch RoHS : Compliant |
| 0 | ||
| IDSD-02-S-18.00-ST4-RW | Samtec Inc | Ribbon Cables / IDC Cables RoHS : Compliant | 0 | |||
| IDSD-07-S-18.00-T | Samtec Inc | Ribbon Cables / IDC Cables Slim Body Double-Row IDC Socket Assemblies, 0.100 Pitch RoHS : Compliant |
| 0 | ||
| IDSD-07-S-18.00-T-P01-G-ST2 | Samtec Inc | Ribbon Cables / IDC Cables RoHS : Compliant | 0 | |||
| IDSD-13-S-18.00-G | Samtec Inc | Ribbon Cables / IDC Cables RoHS : Compliant | 0 | |||
| IDSD-16-S-18.00-T-G-RW | Samtec Inc | Ribbon Cables / IDC Cables RoHS : Compliant | 0 | |||
| IDSD-20-S-18.00-G | Samtec Inc | Ribbon Cables / IDC Cables Slim Body Double-Row IDC Socket Assemblies, 0.100 Pitch RoHS : Compliant |
| 0 | ||
| IDSD-22-S-18.00-G-RW | Samtec Inc | Ribbon Cables / IDC Cables RoHS : Compliant | 0 | |||
| IDSD-24-S-18.00-G-RW | Samtec Inc | Ribbon Cables / IDC Cables RoHS : Compliant | 0 | |||
| IDSS-04-S-18.00-T | Samtec Inc | Ribbon Cables / IDC Cables Slim Body Single-Row IDC Socket Assemblies, 0.100 Pitch RoHS : Compliant |
| 0 | ||
 TME | CF1/2WS-180R | SR Components Inc | Resistor: carbon film; 180Ω; THT; 500mW; ±5%; 350V; Ø0.5x28mm; axial |
| 25,800 | |
| OPD-S18012LE-BW | Opto Plus LED Corporation | Display: LED; 7-segment; 45mm; 1.8"; No.char: 1; red; 200mcd; anode |
| 540 | ||
| BV302S18018 | ZETTLER Magnetics Inc | Transformer: encapsulated; 1.8VA; 230VAC; 18V; 100mA; PCB |
| 474 | ||
| BV382S18032 | ZETTLER Magnetics Inc | Transformer: encapsulated; 3.2VA; 230VAC; 18V; 178mA; PCB |
| 103 | ||
| AHDMBS-18-059 | Amphenol Corporation | Connector: automotive; Automotive RoHS : Compliant |
| 0 | ||
| 1032HS/180 | Beta Electric | Pliers: for rings; for working at height,straight; 180mm |
| 0 | ||
| HCMS-05-S-18.00-02 | Samtec Inc | Ribbon cable with IDC connectors; IDC plug,cables; PIN: 1x5 RoHS : Compliant |
| 0 | ||
| MS-180-HRMJ-F6 | Hirose Electric Co Ltd | Transition: adapter; 50Ω; Plating: gold-plated; PTFE; gold; 6GHz RoHS : Compliant |
| 0 | ||
| PS180023 | ipf electronic gmbh | Sensor: laser; Range: 3m; PNP/NPN; transmitter; Usup: 12÷32VDC; 50mA |
| 0 | ||
| PLS 180G RBP KIT | Fluke Calibration | Laser level; Meas.accur: ≤3mm @ 0÷10m; Range: 60m; Laser class: 2 |
| 0 | ||
| HCSS-07-S-18.00-01 | Samtec Inc | Ribbon cable with IDC connectors; IDC plug,cables; PIN: 1x7 RoHS : Compliant |
| 0 | ||
| MOF2WS-180K | SR Components Inc | Resistor: metal oxide; 180kΩ; THT; 2W; ±5%; 350V; Ø0.7x35mm; axial |
| 0 | ||
| HP01S1800WI-X | ZETTLER Magnetics Inc | Converter: AC/DC; 1W; Uin: 85÷305VAC,100÷430VDC; Uout: 18VDC; OUT: 1 |
| 0 | ||
| JNR13S180L87PU5 | Joyin Co Ltd | Thermistor: NTC; 18Ω; Ø: 13mm; -40÷200°C; 3.2W; ±15%; THT; Ø13mm; bag |
| 0 | ||
| PS180024 | ipf electronic gmbh | Sensor: laser; Range: 60m; PNP / NO / NC; transmitter; 30mA; PIN: 4 |
| 0 | ||
 Ameya Holding Limited | DS1809Z-010+ | Analog Devices Inc | IC: digital potentiometer; 10kΩ; Up/Down Protocol; 6bit; SO8; SMD RoHS : Compliant | 21,747 | ||
| DS1804Z-010+ | Analog Devices Inc | RoHS : Compliant | 14,850 | |||
| DS1807E+ | Analog Devices Inc | DS1807 Series 65 Tabs I2C 45 kOhm Volatile SMT Digital Potentiometer - TSSOP-14 RoHS : Compliant | 13,791 | |||
| DS1809Z-100+ | Analog Devices Inc | Dallastat RoHS : Compliant | 11,827 | |||
| DS1801E-014+ | Analog Devices Inc | Dual Audio Taper Potentiometer RoHS : Compliant | 9,658 | |||
| DS1804-100+ | Analog Devices Inc | IC: digital potentiometer; 100kΩ; Up/Down Protocol; 7bit; DIP8 RoHS : Compliant | 9,457 | |||
| DS1809U-100+T&R | Analog Devices Inc | Dallastat RoHS : Compliant | 9,000 | |||
| DS1806E-100+ | Analog Devices Inc | Digital Sextet Potentiometer RoHS : Compliant | 6,515 | |||
| DS18030-100+ | Analog Devices Inc | IC: digital potentiometer; 100kΩ; I2C; 8bit; DIP16; THT; Channels: 2 RoHS : Compliant | 4,300 | |||
| DS1807S+ | Analog Devices Inc | Addressable Dual Audio Taper Potentiometer RoHS : Compliant | 2,507 | |||
| DS1804U-050+T&R | Analog Devices Inc | Nonvolatile Trimmer Potentiometer RoHS : Compliant | 2,230 | |||
| DS1804U-050+ | Analog Devices Inc | Nonvolatile Trimmer Potentiometer RoHS : Compliant | 1,907 | |||
| DS1804-010+ | Analog Devices Inc | IC: digital potentiometer; 10kΩ; Up/Down Protocol; 7bit; DIP8; THT RoHS : Compliant | 634 | |||
| DS1803E-010+T&R | Analog Devices Inc | DS1803 Series 256 Step 10 kOhm Volatile Addressable Dual Digital Potentiometer RoHS : Compliant | 497 | |||
| DS1804Z-050+ | Analog Devices Inc | RoHS : Compliant | 100 | |||
 ComSIT USA | RG1V226M05011CS180 | Samwha Electronics | Aluminum electrolytic capacitor, 22uF, 50V, radial, Samwha RoHS : Not Compliant | 4,000 | ||
| DS1803Z010+TR | Maxim Integrated Products | Pot Digital 2 Element 256 POS 10 kOhm 2.7V �20% 16-SOIC T/R RoHS : Compliant | 1,710 | |||
SN65ALS180DR | Texas Instruments | DIFFERENTIAL DRIVER AND RECEIVER PAIR Line Transceiver, 1 Func, 1 Driver, 1 Rcvr, BIPolar, PDSO14 RoHS : Not Compliant | 1,330 | |||
| DS1807S | Dallas Semiconductor | ADDRESSABLE DUAL AUDIO TAPER POTENTIOMETER Digital Potentiometer, 2 Func, 45000ohm, 2-wire Serial Control Interface, 65 Positions, CMOS, PDSO16 RoHS : Not Compliant | 445 | |||
| SDS180PS12 | XP Power | AC-DC Regulated Power Supply Module RoHS : Not Compliant | 366 | |||
| DS1803E100+ | Maxim Integrated Products | Pot Digital 2 Element 256 POS 100 kOhm 2.7V �20% 14-SOP Tube RoHS : Compliant | 324 | |||
| DS1804L+ | Maxim Integrated Products | Electronic Component RoHS : Compliant | 222 | |||
DS1802S+ | Maxim Integrated Products | Pot Digital 2 Element 65 POS 45 kOhm 2.7V �20% 20-SOIC Tube RoHS : Compliant | 214 | |||
| 3146110828S1808456HC | Electro Adapter Inc | Electronic Component RoHS : Not Compliant | 20 | |||
| RCEC400GS1802JB | Vishay Intertechnologies | POWER RESISTOR Fixed Resistor, Metal Glaze/thick Film, 400W, 18000ohm, 4000V, 5% +/-Tol, 150ppm/Cel, Chassis Mount RoHS : Not Compliant | 20 | |||
| 75ALS180D | Texas Instruments | DIFFERENTIAL DRIVER AND RECEIVER PAIR Line Transceiver, 1 Func, 1 Driver, 1 Rcvr, BIPolar, PDSO14 RoHS : Compliant | 15 | |||
| EP2S180F1508C3N | Altera Corporation | STRATIX II FPGA Field Programmable Gate Array, 8970 CLBs, 717MHz, 179400-Cell, CMOS, PBGA1508 RoHS : Compliant | 12 | |||
| EP2S180F1020C4N | Altera Corporation | STRATIX II FPGA Field Programmable Gate Array, 71760 CLBs, 717MHz, 179400-Cell, CMOS, PBGA1020 RoHS : Compliant | 5 | |||
| EP2S180F1020C4 | al | STRATIX II FPGA Field Programmable Gate Array, 71760 CLBs, 717MHz, 179400-Cell, CMOS, PBGA1020 RoHS : Not Compliant | 1 | |||
| EP2S180F1020I4 | Altera Corporation | STRATIX II FPGA Field Programmable Gate Array, 71760 CLBs, 717MHz, 179400-Cell, CMOS, PBGA1020 RoHS : Not Compliant | 1 | |||
 Interstate Connecting Components | M83723/82S18087 L/C | Conesys | WALL MT RECEPT, SOCKET, 83723 SIII THREA |
| 0 | |
| M83723/84S1808Y | Conesys | JAM NUT RECEPT, SOCKET, 83723 SIII THREA |
| 0 | ||
| M83723/85S18088 | Conesys | JAM NUT RECEPT, PIN, 83723 SIII THREADED |
| 0 | ||
| M83723/85S1808N L/C | Conesys | JAM NUT RECEPT, PIN, 83723 SIII THREADED |
| 0 | ||
| M83723/97S18087 | Conesys | SELF LOCK, RFI PLUG, SOCKET, 83723 SIII |
| 0 | ||
| JN1041L-S18-04 | Glenair Inc | CIRC EMI NON-ENV BACKSHELL | 0 | |||
| 85333ES1808SN | SOURIAU-SUNBANK | J6203 | 0 | |||
| M83723/85S18086 L/C | Conesys | JAM NUT RECEPT, PIN, 83723 SIII THREADED |
| 0 | ||
| 983-0S 18-02 P6 L | TE Connectivity | 983-0S 18-02 P6 L | 0 | |||
| M83723/83S18086 | Conesys | WALL MT RECEPT, PIN, 83723 SIII THREADED |
| 0 | ||
| M83723/97S1808Y | Conesys | SELF LOCK RFI PLUG, SOCKET, 83723 SIII T |
| 0 | ||
| M83723/98S18086 L/C | Conesys | SELF LOCK RFI PLUG, PIN, 83723 SIII THRE |
| 0 | ||
| M83723/84S18088 | Conesys | JAM NUT RECEPT, SOCKET, 83723 SIII THREA |
| 0 | ||
| M83723/85S18087 L/C | Conesys | JAM NUT RECEPT, PIN, 83723 SIII THREADED |
| 0 | ||
| 667-262-NF-S1801-4 | Glenair Inc | RECEPTACLE COVER FOR 805 MM | 0 | |||
 PEI Genesis | S1802-16-1.5-34 | SOURIAU-SUNBANK |
| 0 | ||
| S1802-22-1.5-34E | SOURIAU-SUNBANK |
| 0 | |||
| S4603FS1804L34-6 | SOURIAU-SUNBANK |
| 0 | |||
| S1802-10-2.0-4 | SOURIAU-SUNBANK |
| 0 | |||
| S1802-18-1.0-34 | SOURIAU-SUNBANK |
| 0 | |||
| S1802-31-3.0-34E | SOURIAU-SUNBANK |
| 0 | |||
| S1807-75 | SOURIAU-SUNBANK |
| 0 | |||
| M83723/85S18088 | Aero-Electric Connector Inc | RoHS : Not Compliant |
| 0 | ||
| JN1041L-S18-04 | SOURIAU-SUNBANK |
| 0 | |||
| 85330ES1808PN | SOURIAU-SUNBANK |
| 0 | |||
| 85333ES1808SN | SOURIAU-SUNBANK |
| 0 | |||
| 85337RS1808P6 | SOURIAU-SUNBANK |
| 0 | |||
| M83723/83S18086 | Aero-Electric Connector Inc | RoHS : Not Compliant |
| 0 | ||
| S2901S1807AIB034-000 | SOURIAU-SUNBANK |
| 0 | |||
| 06A1001S1808N3 | SOURIAU-SUNBANK |
| 0 | |||
 Chip 1 Exchange | RL1220S-180-F | INSTOCK | 75,238 | |||
| 251R14S180GV4T | JOHNS | INSTOCK | 3,195 | |||
| Z8S18010FSC | INSTOCK | 2,521 | ||||
| 1008CS-180XKBC | Coilcraft Inc | INSTOCK | 1,825 | |||
| SN65ALS180DR | Texas Instruments | INSTOCK RoHS : Compliant | 818 | |||
| 103318050 1/2-S 180R | INSTOCK | 800 | ||||
| SN75ALS180D# | Texas Instruments | INSTOCK | 500 | |||
| 0805CS-180XGLC | INSTOCK | 433 | ||||
| NAS1802-3-9 | INSTOCK | 385 | ||||
| 251R14S180JV4T | INSTOCK | 325 | ||||
| SN74AS1805N | INSTOCK | 172 | ||||
| 28S18020VSG | Zilog Inc | INSTOCK | 114 | |||
Z8S18020FSC | Zilog Inc | INSTOCK RoHS : Not Compliant | 48 | |||
| DS1802 | INSTOCK | 37 | ||||
| DWDM28DTANS18-001 | Viavi Solutions Inc | INSTOCK | 1 | |||
 Avnet Abacus | ATBS-PS-1805 | Amphenol Corporation | Backshell for T1618PSX and AT1615PSX Series 1518 Position HeavyDuty Connectors 18 Shell Size ST Thermoplastic (Alt: ATBS-PS-1805) RoHS : Compliant | 1,050 | ||
| MF-LS180 | Bourns Inc | (Alt: MF-LS180) RoHS : Compliant | 0 | |||
| MF-LS180S | Bourns Inc | (Alt: MF-LS180S) RoHS : Compliant | 0 | |||
| ATS180A-E | CTS Corporation | (Alt: ATS180A-E) RoHS : Compliant | 0 | |||
GCS180PS28 | XP Power | ACDC Open Frame Power Supply PSU ITE Medical 1 Output 187W 7CFM 150 W (Alt: GCS180PS28) RoHS : Compliant | 0 | |||
| GCS180PS15 | XP Power | ACDC Open Frame Power Supply PSU ITE Medical 1 Output 187W 7CFM 150 W (Alt: GCS180PS15) RoHS : Compliant | 0 | |||
| GCS180PS28-C | XP Power | ACDC Enclosed Power Supply PSU ITE Medical 1 Outputs 187 W 28 VDC 64 A (Alt: GCS180PS28-C) RoHS : Compliant | 0 | |||
| AHDPBS-18-002 | Amphenol Corporation | (Alt: AHDPBS-18-002) RoHS : Compliant | 0 | |||
| TRS1-80MCR00V | KEMET Corporation | (Alt: TRS1-80MCR00V) RoHS : Compliant | 0 | |||
| RCEC400GS1802KB | Vishay Intertechnologies | (Alt: RCEC400GS1802KB) RoHS : Compliant | 0 | |||
| NPIS84LS180MTRF | NIC Components Corp | - Tape and Reel (Alt: NPIS84LS180MTRF) RoHS : Compliant | 0 | |||
| TPSA225K016S1800 | Kyocera AVX Components | Surface Mount Tantalum Capacitor 22 uF 16 V 1206 321618 Metric 10 18 Ohm A Size Code - Tape and Reel (Alt: TPSA225K016S1800) RoHS : Compliant | 0 | |||
CS1808KKX7RZBB103.jpg) | YAGEO Corporation | SMD Multilayer Ceramic Capacitor 001 uF 630 V 1808 4520 Metric 10 X7R CS Series 45 mm (Alt: CS1808KKX7RZBB103) RoHS : Compliant | 0 | |||
| MTLW-107-22-G-S-180 | Samtec Inc | Pin Header BoardtoBoard 254 mm 1 Rows 7 Contacts Through Hole MTLW Series (Alt: MTLW-107-22-G-S-180) RoHS : Compliant | 0 | |||
| HMTSW-108-08-T-S-180-RA | Samtec Inc | (Alt: HMTSW-108-08-T-S-180-RA) RoHS : Compliant | 0 | |||
Avnet Asia | 251R14S180JV4T | Johanson Technology Inc | Cap Ceramic 18pF 250V C0G 5% SMD 0603 125?C Paper T/R (Alt: 251R14S180JV4T) RoHS : Compliant | 0 | ||
| NCP163AFCS180T2G | onsemi | LDO Regulator, 250 mA, Ultra-High PSRR, Ultra-Low Noise 1.8 V, Active Discharge. (Alt: NCP163AFCS180T2G) RoHS : Compliant | 0 | |||
| CCS-180719-01-MP | Samtec Inc | SATCCS-180719-01-MP CUSTOM HDR COMPONENT (Alt: CCS-180719-01-MP) RoHS : Compliant | 0 | |||
| 16SVPS180M | Panasonic Electronic Components | Polymer Aluminium Electrolytic Capacitor, 180 uF, 16 V, Radial Can - SMD, 0.029 ohm (Alt: 16SVPS180M) RoHS : Compliant | 0 | |||
| EXS00A-CS18012 | Nihon Dempa Kogyo Co Ltd | (Alt: EXS00A-CS18012) RoHS : Compliant | 0 | |||
| NCP161AFCS180T2G | onsemi | LDO Regulator, 450 mA, Ultra-High PSRR, Ultra-Low Noise 1.8V, Active Discharge. (Alt: NCP161AFCS180T2G) RoHS : Compliant | 0 | |||
 Avnet Silica | EVX10AS180AGS | Teledyne HiRel | Analog to Digital Converter 10 bit Pipelined 15 GSPS Differential Single Ended LVDS (Alt: EVX10AS180AGS) RoHS : Compliant | 0 | ||
| MCS1803GS-30-Z | Monolithic Power Systems | (Alt: MCS1803GS-30-Z) RoHS : Compliant | 0 | |||
| EV10AS180GS-EB | Teledyne HiRel | Evaluation Board EV10AS180GS ADC (Alt: EV10AS180GS-EB) RoHS : Compliant | 0 | |||
| MCS1802GS-05-P | Monolithic Power Systems | Hall EffectBased Linear Current Sensor IC 5A 264mVA 100kHz 8Pin SOIC (Alt: MCS1802GS-05-P) RoHS : Compliant | 0 | |||
| MCS1802GS-50-P | Monolithic Power Systems | Hall EffectBased Linear Current Sensor IC 50A 264mVA 100kHz 8Pin SOIC (Alt: MCS1802GS-50-P) RoHS : Compliant | 0 | |||
| MCS1803GS-40-Z | Monolithic Power Systems | (Alt: MCS1803GS-40-Z) RoHS : Compliant | 0 | |||
| MCS1802GS-30-Z | Monolithic Power Systems | (Alt: MCS1802GS-30-Z) RoHS : Compliant | 0 | |||
| MCS1800GS-12-P | Monolithic Power Systems | Current Sensor 100 kHz SOIC 8 Pins 3 V 36 V (Alt: MCS1800GS-12-P) RoHS : Compliant | 0 | |||
| MCS1802GS-10-P | Monolithic Power Systems | Hall EffectBased Linear Current Sensor IC 10A 132mVA 100kHz 8Pin SOIC (Alt: MCS1802GS-10-P) RoHS : Compliant | 0 | |||
| EV10AS180AGS-EB | Teledyne HiRel | Evaluation Board EV10AS180A ADC (Alt: EV10AS180AGS-EB) RoHS : Compliant | 0 | |||
| EV10AS180AMGC-V | Teledyne HiRel | Analog to Digital Converter 10 bit Pipelined 15 GSPS Differential Single Ended LVDS (Alt: EV10AS180AMGC-V) RoHS : Compliant | 0 | |||
| MCS1806GS-3-10-P | Monolithic Power Systems | Current Sensor SOIC 8 Pins (Alt: MCS1806GS-3-10-P) RoHS : Compliant | 0 | |||
| MCS1806GS-5-10-P | Monolithic Power Systems | Current Sensor SOIC 8 Pins (Alt: MCS1806GS-5-10-P) RoHS : Compliant | 0 | |||
| MCP1826S-1802E/EB | Microchip Technology Inc | (Alt: MCP1826S-1802E/EB) RoHS : Compliant | 0 | |||
| MCS1805GS-305-U-P | Monolithic Power Systems | Current Sensor Hall Effect Linear Unidirectional 25 SOIC 8 Pins (Alt: MCS1805GS-305-U-P) RoHS : Compliant | 0 | |||
 Braemac Americas-Symmetry | CFM600S180-PC | Cincon Electronics Corporation | ITE/Industrial Open Frame Baseplate-cooled Power Supply |
| 0 | |
ASPI-4030S-180M-T | Abracon Corporation | RoHS : Compliant |
| 0 | ||
| CFM600S180F | Cincon Electronics Corporation | ITE/Industrial Open Frame Baseplate-cooled Power Supply |
| 0 | ||
AMPLA7030S-180MT | Abracon Corporation | RoHS : Compliant |
| 0 | ||
ASPI-0315S-180M-T | Abracon Corporation | RoHS : Unknown |
| 0 | ||
ASPI-0428S-180N-T | Abracon Corporation | RoHS : Compliant |
| 0 | ||
| CFM500S180 | Cincon Electronics Corporation | AC-DC AC-DC MODULES RoHS : Compliant |
| 0 | ||
ASPI-1207S-180M-T | Abracon Corporation | RoHS : Compliant |
| 0 | ||
| CFM600S180-R | Cincon Electronics Corporation | ITE/Industrial Open Frame Baseplate-cooled Power Supply |
| 0 | ||
| CFM600S180 | Cincon Electronics Corporation | ITE/Industrial Open Frame Baseplate-cooled Power Supply |
| 0 | ||
| CFM600S180C-R | Cincon Electronics Corporation | ITE/Industrial Open Frame Baseplate-cooled Power Supply |
| 0 | ||
| CFM500S180-PC | Cincon Electronics Corporation | AC-DC AC-DC MODULES RoHS : Compliant |
| 0 | ||
ASPI-0602S-180M-T | Abracon Corporation | RoHS : Compliant |
| 0 | ||
| CFM600S180C | Cincon Electronics Corporation | ITE/Industrial Open Frame Baseplate-cooled Power Supply |
| 0 | ||
| GPS-18037 | SparkFun Electronics | SparkFun GNSS Receiver Breakout - MAX-M10S (Qwiic) |
| 0 | ||
 Component Electronics, Inc | 251R14S180GV4T | Johanson Dielectrics Inc | IN STOCK SHIP TODAY RoHS : Unknown |
| 44,000 | |
| RR0510S-1802-FN | Cyntech Inc | IN STOCK SHIP TODAY | 9,965 | |||
| ECS-180-20-5P-TR | ECS International Inc | IN STOCK SHIP TODAY |
| 5,000 | ||
| 0805CS-180XJLC | Coilcraft Inc | IN STOCK SHIP TODAY RoHS : Compliant |
| 4,706 | ||
| 1008CS-180XJBC | Coilcraft Inc | IN STOCK SHIP TODAY RoHS : Not Compliant | 3,800 | |||
| DS1803Z-010-T/R | Dallas Semiconductor | IN STOCK SHIP TODAY |
| 1,510 | ||
| 1008CS-180XJBB | Coilcraft Inc | IN STOCK SHIP TODAY RoHS : Not Compliant |
| 110 | ||
| MCP1825S-1802E/DB | Microchip Technology Inc | IN STOCK SHIP TODAY RoHS : Compliant |
| 110 | ||
| RWR81S1800FM | Vishay Dale | IN STOCK SHIP TODAY RoHS : Unknown |
| 28 | ||
| 892NAS-180M=P3 | TOKO Inc | IN STOCK SHIP TODAY RoHS : Compliant |
| 27 | ||
| MS18029-11S-8 | ARVAN | IN STOCK SHIP TODAY |
| 19 | ||
| DS1804-010 | Dallas Semiconductor | IN STOCK SHIP TODAY RoHS : Not Compliant | 14 | |||
| EGS-1-80-.383-1%-B12 | Vishay Intertechnologies | IN STOCK SHIP TODAY |
| 6 | ||
| BM90-220S18-00 | Enargy Power Corporation | IN STOCK SHIP TODAY |
| 4 | ||
| AALCS-18.0 | Alcatel-Lucent | IN STOCK SHIP TODAY | 2 | |||
 EBV Elektronik | SS18-0B00-00 | Broadcom Limited | Switch Fabric SMT PCIe PEX9700 Series 33 Lanes 9 Ports 2 HotPlug Controllers (Alt: SS18-0B00-00) RoHS : Compliant | 0 | ||
| VS-180NQ045PBF | Vishay Intertechnologies | Modules Rectifiers HALFPAK SK (Alt: VS-180NQ045PBF) RoHS : Compliant | 0 | |||
| UFS180JE3/TR13 | Microchip Technology Inc | (Alt: UFS180JE3/TR13) RoHS : Compliant | 0 | |||
| NCP163AFCS180T2G | onsemi | LDO Regulator 250 mA UltraHigh PSRR UltraLow Noise 18 V Active Discharge ONSSPCLDO (Alt: NCP163AFCS180T2G) RoHS : Compliant | 0 | |||
| SQS180ENW-T1_GE3 | Vishay Intertechnologies | Automotive NChannel 40 V DS 175C MOSFET PowerPAK 12128SLW (Alt: SQS180ENW-T1_GE3) RoHS : Compliant | 0 | |||
| NCP161AFCS180T2G | onsemi | LDO Regulator 450 mA UltraHigh PSRR UltraLow Noise 18V Active Discharge ONSSPCLDO (Alt: NCP161AFCS180T2G) RoHS : Compliant | 0 | |||
| MCP1825S-1802E/DB | Microchip Technology Inc | LDO Regulator Pos 18V 05A 4Pin3Tab SOT223 Tube (Alt: MCP1825S-1802E/DB) RoHS : Compliant | 0 | |||
| MCP1826S-1802E/AB | Microchip Technology Inc | (Alt: MCP1826S-1802E/AB) RoHS : Compliant | 0 | |||
| SQS180ELNW-T1_GE3 | Vishay Intertechnologies | (Alt: SQS180ELNW-T1_GE3) RoHS : Compliant | 0 | |||
| MCP1826S-1802E/DB | Microchip Technology Inc | (Alt: MCP1826S-1802E/DB) RoHS : Compliant | 0 | |||
| CS18047_HB-IP-24-M | LEDIL | LED Lighting Multi Lens 30 Wide Beam PMMA 173mm x 714mm x 10mm Box (Alt: CS18047_HB-IP-24-M) RoHS : Compliant | 0 | |||
| CS18048_HB-IP-24-W | LEDIL | LED Lens Cover 60 Wide Beam PMMA 173mm x 714mm x 10mm Box (Alt: CS18048_HB-IP-24-W) RoHS : Compliant | 0 | |||
| CS18049_HB-IP-24-WWW | LEDIL | MultiLens For Use With For Use With J Series 5050 Round LESLUXEON 5050 Square LESDuris S8SEOUL (Alt: CS18049_HB-IP-24-WWW) RoHS : Compliant | 0 | |||
| 6PS18012E4FG38393NWSA1 | Infineon Technologies AG | (Alt: SP001054242) RoHS : Not Compliant | 0 | |||
| CS18051_STRADA-IP-24-DWC | LEDIL | LED Lens Array 173mm x 71mm x 9mm Polycarbonate Box (Alt: CS18051_STRADA-IP-24-DWC) RoHS : Compliant | 0 | |||
 Flip Electronics | NCP161AFCS180T2G | onsemi | Stock, Ship Today RoHS : Compliant | 200,000 | ||
| NCP160BFCS180T2G | onsemi | Stock, Ship Today RoHS : Compliant |
| 160,000 | ||
| Z8S18020VSG1960 | Littelfuse Inc | Stock, Ship Today | 25,586 | |||
| NCP161BFCS180T2G | onsemi | Stock, Ship Today RoHS : Compliant |
| 4,885 | ||
| Z8S18020VEG00TR | Littelfuse Inc | Stock, Ship Today | 4,550 | |||
| Z8S18010VEG | Littelfuse Inc | Stock, Ship Today | 2,375 | |||
| Z8S18010FSG | Littelfuse Inc | Stock, Ship Today RoHS : Compliant | 2,126 | |||
| Z8S18010VSG | Littelfuse Inc | Stock, Ship Today | 1,675 | |||
| Z8S18020FSG | Littelfuse Inc | Stock, Ship Today RoHS : Compliant | 725 | |||
| Z8S18010FEG | Littelfuse Inc | Stock, Ship Today RoHS : Compliant | 305 | |||
| Z8S18020VEG | Littelfuse Inc | Stock, Ship Today | 204 | |||
| Z8S18033FSG | Littelfuse Inc | Stock, Ship Today RoHS : Compliant | 161 | |||
| EP2S180F1020C3 | Altera Corporation | Stock RoHS : Not Compliant | 10 | |||
 Master Electronics | S2SDT-14-24-S-18.00-S | Samtec Inc | RoHS : Compliant |
| 0 | |
| MTLW-102-05-L-S-180 | Samtec Inc | RoHS : Compliant |
| 0 | ||
| MTLW-115-05-L-S-180 | Samtec Inc | RoHS : Compliant |
| 0 | ||
| MTLW-128-05-L-S-180 | Samtec Inc | RoHS : Compliant |
| 0 | ||
| MTMM-103-05-F-S-180 | Samtec Inc | 2.00 mm Variable Post Height Terminal Strip RoHS : Compliant |
| 0 | ||
| MTMM-104-06-T-S-180 | Samtec Inc | 2.00 mm Variable Post Height Terminal Strip RoHS : Compliant |
| 0 | ||
| MTMM-105-07-L-S-180 | Samtec Inc | RoHS : Compliant |
| 0 | ||
| MTMM-106-03-S-S-180 | Samtec Inc | RoHS : Compliant |
| 0 | ||
| MTMM-106-14-G-S-180 | Samtec Inc | 2.00 mm Variable Post Height Terminal Strip RoHS : Compliant |
| 0 | ||
| MMSD-02-22C-S-18.00-D-K-LU | Samtec Inc | RoHS : Compliant |
| 0 | ||
| MMSD-04-20-S-18.00-S-K | Samtec Inc | .100 Mini Mate® Double Row Discrete Wire Cable Assembly Socket RoHS : Compliant |
| 0 | ||
| MMSD-04-22C-S-18.00-D-K-LU | Samtec Inc | RoHS : Compliant |
| 0 | ||
| MMSD-05-24-S-18.00-S-P | Samtec Inc | RoHS : Compliant |
| 0 | ||
| MMSD-10-22-S-18.00-S-P | Samtec Inc | .100 Mini Mate® Double Row Discrete Wire Cable Assembly Socket RoHS : Compliant |
| 0 | ||
| MMSDT-02-28-S-18.00-S-K | Samtec Inc | .100 Mini Mate® Double Row Discrete Wire Teflon® Cable Assembly Socket RoHS : Compliant |
| 0 | ||
 Pasternack Enterprises US | PE3C0112/HS-180 | Pasternack Enterprises | Key Specifications, Connector 1 Series: N, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: N, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Tri-Metal, RF Cable Part Number: LMR-600, RF Cable Type: LMR-600, RF Cable Impedance: 50 Ohm, Length, Max: 180 inches. N Male to N Male Low Loss Cable 180 Inch Length Using LMR-600 Coax with HeatShrink., Radio frequency assembly N male to N male low loss cable 180 inch length using LMR-600 coax with heatshrink from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The N male to N male low loss cable 180 inch length using LMR-600 coax with heatshrink, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom type N to type N cable assembly orders will ship the same business day as well. Pasternack RF coax low loss cable assembly is built with a type N cable connection on one end and a type N cable connection on the other. Our low loss type N to type N cable assembly has a male gender on end 1 and a male on end 2. PE3C0112/HS-180 can also be known as a low loss type N plug to type N plug cable assembly and will be shipped the same day as it is purchased. This flexible RF cable assembly with a 0.5-inch diameter has copper clad aluminum as the cable's inner conducting material and PE (F) dielectric type. This cable assembly employs durable and flexible materials, and with a 6-inch bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. Our PE3C0112/HS-180 RF cable has a PE jacket of 0.590-inch diameter. This radio frequency cable assembly can withstand temperatures ranging from -40 to 85 degrees C. The flexible RF cable has an in-series connection. This cable assembly has a typical propagation velocity of 87% and a minimum RF shielding of 90 dB. Our type N male to type N male cable has a maximum VSWR of 1.4:1. Type N plug to type N plug cable assembly PE3C0112/HS-180 is built with LMR-600 which is a flexible coax type. The Pasternack flexible type N cable assembly is manufactured with type N to type N cable connectors, has a 50 Ohm impedance, and is double shielded. Both the connectors have a crimp/non-solder contact attachment method and a brass body with tri-metal plating. Additional dimensions, specifications and CAD drawings for this low loss RF cable are available on our downloadable PDF datasheet. Low loss type N plug to type N plug cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality type N to type N cable assembly for quick shipment worldwide. Variations of type N cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal type N to type N low loss RF cable assembly as per your requirements. LMR® is a registered trademark of Times Microwave Systems. |
| 634 | |
| PE3C0062/HS-180 | Pasternack Enterprises | Key Specifications, Connector 1 Series: N, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: N, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Tri-Metal, RF Cable Part Number: LMR-600, RF Cable Type: LMR-600, RF Cable Impedance: 50 Ohm, Length, Max: 180 inches. N Male to N Male Low Loss Cable 180 Inch Length Using LMR-600 Coax with HeatShrink., Radio frequency assembly N male to N male low loss cable 180 inch length using LMR-600 coax with heatshrink from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The N male to N male low loss cable 180 inch length using LMR-600 coax with heatshrink, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom type N to type N cable assembly orders will ship same day as well. Pasternack RF coax low loss cable assembly is built with N type cable connection on one end and type N cable connection on the other. Our low loss N type to type N cable assemblies have a male gender on end 1 and male on end 2. PE3C0062/HS-180 can also be known as a low loss N type plug to type N plug cable assembly and will be shipped same-day as it is purchased. Type N plug to N type plug cable assembly PE3C0062/HS-180 is built with LMR-600 which is a flexible coax type. The Pasternack flexible N cable assembly is manufactured with type N to type N cable connectors, has a 50 Ohm impedance and is double shielded. RF specs on this 6 GHz maximum frequency type N male to type N male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. Low loss N type plug to type N plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality type N to type N cable assembly for quick shipment worldwide. Variations of N type cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this N male to N male low loss cable 180 inch length using LMR-600 coax with heatshrink. |
| 162 | ||
| PE3C10780/HS-180 | Pasternack Enterprises | Key Specifications, Connector 1 Series: N, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: N, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Right Angle, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Tri-Metal, RF Cable Part Number: LMR-600-FR, RF Cable Type: LMR-600-FR, RF Cable Impedance: 50 Ohm, Length, Max: 180 inches. Fire Rated N Male to N Male Right Angle Low Loss Cable 180 Inch Length Using LMR-600-FR Coax with Times Microwave Components with HeatShrink., Pasternack’s PE3C10780/HS-180 low loss type N male to right angle type N male RF cable assembly using LMR-600-FR coax is part of one of the largest selections of same-day ship coaxial cables for RF, microwave, and millimeter wave interconnect solutions. These coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, defense/military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The type N male to type N male cable, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom type N cable assembly orders will ship the same business day as well. Pasternack RF coax low loss cable assembly is built with a type N cable connection on one end and a right angle type N cable connection on the other. Our type N to type N cable assembly has a male gender on end 1 and a male on end 2. PE3C10780/HS-180 can also be known as a low loss type N plug to right angle type N plug cable assembly and will be shipped the same day as it is purchased. This flexible RF cable assembly with a 0.5-inch diameter has copper as the cable’s inner conducting material and Foam PE dielectric type. This cable assembly employs durable and flexible materials, and with a 6-inch bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. Our PE3C10780/HS-180 RF cable has a PE jacket of 0.590-inch diameter. This radio frequency cable assembly can withstand temperatures ranging from -40 to 85 degrees C. The flexible RF cable has an in-series connection. This cable assembly has a typical propagation velocity of 85% and a minimum RF shielding of 90 dB. Our type N male to right angle type N male cable has a maximum VSWR of 1.4:1. This PE3C10780/HS-180 type N plug to type N plug cable assembly is built with LMR-600-FR, which is a flexible coax type. The Pasternack flexible type N cable assembly is manufactured with type N to right angle type N cable connectors, has a 50 Ohm impedance, and is double shielded. Both the connectors have a crimp/non-solder contact attachment method and a brass body with tri-metal plating. Additional dimensions, specifications, and CAD drawings for this 180-inch-long low loss RF cable are available on our downloadable PDF datasheet. PE3C10780/HS-180 can also be used in the other direction and will be a right angle type N male to type N male cable assembly if the opposite connectivity is required. This low loss type N plug to type N right angle plug cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality type N to type N cable assembly for quick shipment worldwide. Variations of type N cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High-quality custom RF cable assembly products for microwave and millimeter wave radio transmitters, receivers, antenna jumpers, component interconnections, RF test and measurement labs, military/defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment, and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal type N to type N low loss RF cable assembly as per your requirements.LMR® is a registered trademark of Times Microwave Systems. |
| 160 | ||
| PE3W17167/HS-180 | Pasternack Enterprises | Key Specifications, Connector 1 Series: N, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: N, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Right Angle, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Tri-Metal, RF Cable Part Number: LMR-LW600, RF Cable Type: LMR-LW600, RF Cable Impedance: 50 Ohm, Length, Max: 180 inches. N Male to N Male Right Angle Low Loss Cable 180 Inch Length Using LMR-LW600 Coax with HeatShrink., Radio frequency assembly N male to N male right angle low loss cable 180 inch length using LMR-LW600 coax with heatshrink from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The N male to N male right angle low loss cable 180 inch length using LMR-LW600 coax with heatshrink, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom type N to type N cable assembly orders will ship the same business day as well. Pasternack RF coax low loss cable assembly is built with a type N cable connection on one end and a right angle type N cable connection on the other. Our low loss type N to right angle type N cable assembly has a male gender on end 1 and a male on end 2. PE3W17167/HS-180 can also be known as a low loss type N plug to right angle type N plug cable assembly and will be shipped the same day as it is purchased. This flexible RF cable assembly with a 0.5-inch diameter has copper as the cable's inner conducting material and Foam PE dielectric type. This cable assembly employs durable and flexible materials, and with a 6-inch bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. Our PE3W17167/HS-180 RF cable has a PE jacket of 0.590-inch diameter. This radio frequency cable assembly can withstand temperatures ranging from -40 to 85 degrees C. The flexible RF cable has an in-series connection. This cable assembly has a typical propagation velocity of 85% and a minimum RF shielding of 90 dB. Our type N male to right angle type N male cable has a maximum VSWR of 1.4:1. Type N plug to type N plug cable assembly PE3W17167/HS-180 is built with LMR-LW600 which is a flexible coax type. The Pasternack flexible type N cable assembly is manufactured with type N to right angle type N cable connectors, has a 50 Ohm impedance, and is double shielded. One connector features the crimp/solder attachment method and a brass body with tri-metal plating, while the other has the crimp/non-solder contact attachment method and a brass body with tri-metal plating. Additional dimensions, specifications and CAD drawings for this low loss RF cable are available on our downloadable PDF datasheet. PE3W17167/HS-180 can also be used in the other direction and will be a right angle type N male to type N male cable assembly if the opposite connectivity is required. Low loss type N plug to type N right angle plug cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality type N to type N cable assembly for quick shipment worldwide. Variations of type N cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal type N to type N low loss RF cable assembly as per your requirements. LMR® is a registered trademark of Times Microwave Systems. |
| 64 | ||
| PE3W17710/HS-180 | Pasternack Enterprises | Key Specifications, Connector 1 Series: N, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: 4.3-10, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Tri-Metal, RF Cable Part Number: LMR-LW600, RF Cable Type: LMR-LW600, RF Cable Impedance: 50 Ohm, Length, Max: 180 inches. N Male to 4.3-10 Male Low Loss Cable 180 Inch Length Using LMR-LW600 Coax with HeatShrink., Radio frequency assembly N male to 4.3-10 male low loss cable 180 inch length using LMR-LW600 coax with heatshrink from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The N male to 4.3-10 male low loss cable 180 inch length using LMR-LW600 coax with heatshrink, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom type N to 4.3-10 cable assembly orders will ship the same business day as well. Pasternack RF coax low loss cable assembly is built with a type N cable connection on one end and a 4.3-10 cable connection on the other. Our low loss type N to 4.3-10 cable assembly has a male gender on end 1 and a male on end 2. PE3W17710/HS-180 can also be known as a low loss type N plug to 4.3-10 plug cable assembly and will be shipped the same day as it is purchased. This flexible RF cable assembly with a 0.5-inch diameter has copper as the cable's inner conducting material and Foam PE dielectric type. This cable assembly employs durable and flexible materials, and with a 6-inch bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. Our PE3W17710/HS-180 RF cable has a PE jacket of 0.590-inch diameter. This radio frequency cable assembly can withstand temperatures ranging from -40 to 85 degrees C. The flexible RF cable has a between series connection. This cable assembly has a typical propagation velocity of 85% and a minimum RF shielding of 90 dB. Our type N male to 4.3-10 male cable has a maximum VSWR of 1.4:1. Type N plug to 4.3-10 plug cable assembly PE3W17710/HS-180 is built with LMR-LW600 which is a flexible coax type. The Pasternack flexible type N cable assembly is manufactured with type N to 4.3-10 cable connectors, has a 50 Ohm impedance, and is double shielded. Both the connectors have a crimp/solder attachment method and a brass body with tri-metal plating. Additional dimensions, specifications and CAD drawings for this low loss RF cable are available on our downloadable PDF datasheet. PE3W17710/HS-180 can also be used in the other direction and will be a 4.3-10 male to type N male cable assembly if the opposite connectivity is required. Low loss type N plug to 4.3-10 plug cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality type N to 4.3-10 cable assembly for quick shipment worldwide. Variations of type N and 4.3-10 cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal type N to 4.3-10 low loss RF cable assembly as per your requirements. LMR® is a registered trademark of Times Microwave Systems. |
| 32 | ||
| PE3C5133/HS-180 | Pasternack Enterprises | Key Specifications, Connector 1 Series: N, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Right Angle, Connector 1 Impedance: 50 Ohm, Connector 2 Series: 7/16 DIN, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Tri-Metal, RF Cable Part Number: LMR-600, RF Cable Type: LMR-600, RF Cable Impedance: 50 Ohm, Length, Max: 180 inches. N Male Right Angle to 7/16 DIN Male Low Loss Cable 180 Inch Length Using LMR-600 Coax With Times Microwave Components with HeatShrink., Radio frequency assembly N male right angle to 7/16 DIN male low loss cable 180 inch length using LMR-600 coax with Times Microwave components with heatshrink from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The N male right angle to 7/16 DIN male low loss cable 180 inch length using LMR-600 coax with Times Microwave components with heatshrink, type N cable like our other Pasternack coaxial cable assemblies, will ship the same day and any custom type N to 7/16 DIN cable assembly orders will ship same day as well. Pasternack RF coax low loss cable assembly is built with right angle type N cable connection on one end and 7/16 DIN cable connection on the other. Our low loss right angle N type to 7/16 DIN cable assemblies have a male gender on end 1 and male on end 2. PE3C5133/HS-180 can also be known as a low loss right angle type N plug to 7/16 DIN plug cable assembly and will be shipped same-day as it is purchased. Type N plug to 7/16 DIN plug cable assembly PE3C5133/HS-180 is built with LMR-600 which is a flexible coax type. The Pasternack flexible N cable assembly is manufactured with right angle N type to 7/16 DIN cable connectors, has a 50 Ohm impedance and is double shielded. RF specs on this 3 GHz maximum frequency N type right angle male to 7/16 DIN male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3C5133/HS-180 can also be used in the other direction and will be 7/16 DIN male to right angle type N male cable assembly if the opposite connectivity is required. Low loss type N right angle plug to 7/16 DIN plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality N type to 7/16 DIN cable assembly for quick shipment worldwide. Variations of type N cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this N male right angle to 7/16 DIN male low loss cable 180 inch length using LMR-600 coax with Times Microwave components with heatshrink. |
| 5 | ||
| PE3C7615/HS-180 | Pasternack Enterprises | Key Specifications, Connector 1 Series: N, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: N, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Tri-Metal, RF Cable Part Number: LMR-600-UF, RF Cable Type: LMR-600-UF, RF Cable Impedance: 50 Ohm, Length, Max: 180 inches. N Male to N Male Low Loss Cable 180 Inch Length Using LMR-600-UF Coax With Times Microwave Components with HeatShrink., Radio frequency assembly N male to N male low loss cable 180 inch length using LMR-600-UF coax with Times Microwave components with heatshrink from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The N male to N male low loss cable 180 inch length using LMR-600-UF coax with Times Microwave components with heatshrink, type N cable like our other Pasternack coaxial cable assemblies, will ship the same day and any custom type N to N type cable assembly orders will ship same day as well. Pasternack RF coax low loss cable assembly is built with type N cable connection on one end and type N cable connection on the other. Our low loss N type to type N cable assemblies have a male gender on end 1 and male on end 2. PE3C7615/HS-180 can also be known as a low loss N type plug to type N plug cable assembly and will be shipped same-day as it is purchased. Type N plug to type N plug cable assembly PE3C7615/HS-180 is built with LMR-600-UF which is a flexible coax type. The Pasternack flexible N cable assembly is manufactured with type N to N type cable connectors, has a 50 Ohm impedance and is double shielded. RF specs on this 5.8 GHz maximum frequency type N male to type N male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. Low loss type N plug to type N plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality type N to N type cable assembly for quick shipment worldwide. Variations of type N cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this N male to N male low loss cable 180 inch length using LMR-600-UF coax with Times Microwave components with heatshrink. |
| 0 | ||
| PE3C1548LF/HS-180 | Pasternack Enterprises | Key Specifications, Connector 1 Series: N, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: N, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Tri-Metal, RF Cable Part Number: LMR-600-DB, RF Cable Type: LMR-600-DB, RF Cable Impedance: 50 Ohm, Length, Max: 180 inches. N Male to N Male Low Loss Cable 180 Inch Length Using LMR-600-DB Coax with HeatShrink, LF Solder., Radio frequency assembly N male to N male low loss cable 180 inch length using LMR-600-DB coax with heatshrink, LF solder from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The N male to N male low loss cable 180 inch length using LMR-600-DB coax with heatshrink, LF solder, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom type N to type N cable assembly orders will ship same day as well. Pasternack RF coax low loss cable assembly is built with N type cable connection on one end and type N cable connection on the other. Our low loss type N to N type cable assemblies have a male gender on end 1 and male on end 2. PE3C1548LF/HS-180 can also be known as a low loss N type plug to type N plug cable assembly and will be shipped same-day as it is purchased. Type N plug to N type plug cable assembly PE3C1548LF/HS-180 is built with LMR-600-DB which is a flexible coax type. The Pasternack flexible N cable assembly is manufactured with type N to type N cable connectors, has a 50 Ohm impedance and is double shielded. RF specs on this 5.8 GHz maximum frequency type N male to type N male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. Low loss type N plug to N type plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality type N to type N cable assembly for quick shipment worldwide. Variations of N type cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this N male to N male low loss cable 180 inch length using LMR-600-DB coax with heatshrink, LF solder. |
| 0 | ||
| PE3C1548/HS-180 | Pasternack Enterprises | Key Specifications, Connector 1 Series: N, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: N, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Tri-Metal, RF Cable Part Number: LMR-600-DB, RF Cable Type: LMR-600-DB, RF Cable Impedance: 50 Ohm, Length, Max: 180 inches. N Male to N Male Low Loss Cable 180 Inch Length Using LMR-600-DB Coax with HeatShrink., Radio frequency assembly N male to N male low loss cable 180 inch length using LMR-600-DB coax with heatshrink from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The N male to N male low loss cable 180 inch length using LMR-600-DB coax with heatshrink, N type cable like our other Pasternack coaxial cable assemblies, will ship the same day and any custom N type to type N cable assembly orders will ship same day as well. Pasternack RF coax low loss cable assembly is built with type N cable connection on one end and type N cable connection on the other. Our low loss N type to type N cable assemblies have a male gender on end 1 and male on end 2. PE3C1548/HS-180 can also be known as a low loss N type plug to type N plug cable assembly and will be shipped same-day as it is purchased. Type N plug to N type plug cable assembly PE3C1548/HS-180 is built with LMR-600-DB which is a flexible coax type. The Pasternack flexible N cable assembly is manufactured with type N to type N cable connectors, has a 50 Ohm impedance and is double shielded. RF specs on this 5.8 GHz maximum frequency N type male to type N male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. Low loss N type plug to type N plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality type N to N type cable assembly for quick shipment worldwide. Variations of type N cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this N male to N male low loss cable 180 inch length using LMR-600-DB coax with heatshrink. |
| 0 | ||
| PE3W05445LF/HS-180 | Pasternack Enterprises | Key Specifications, Connector 1 Series: N, Connector 1 Gender: Female, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: N, Connector 2 Gender: Female, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Tri-Metal, RF Cable Part Number: LMR-600-DB, RF Cable Type: LMR-600-DB, RF Cable Impedance: 50 Ohm, Length, Max: 180 inches. N Female to N Female Low Loss Cable 180 Inch Length Using LMR-600-DB Coax with HeatShrink, LF Solder., Radio frequency assembly N female to N female low loss cable 180 inch length using LMR-600-DB coax with heatshrink, LF solder from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The N female to N female low loss cable 180 inch length using LMR-600-DB coax with heatshrink, LF solder, type N cable like our other Pasternack coaxial cable assemblies, will ship the same day and any custom type N to N type cable assembly orders will ship same day as well. Pasternack RF coax low loss cable assembly is built with type N cable connection on one end and type N cable connection on the other. Our low loss type N to N type cable assemblies have a female gender on end 1 and female on end 2. PE3W05445LF/HS-180 can also be known as a low loss type N jack to type N jack cable assembly and will be shipped same-day as it is purchased. N type jack to type N jack cable assembly PE3W05445LF/HS-180 is built with LMR-600-DB which is a flexible coax type. The Pasternack flexible N cable assembly is manufactured with type N to N type cable connectors, has a 50 Ohm impedance and is double shielded. RF specs on this 5.8 GHz maximum frequency N type female to type N female cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. Low loss type N jack to type N jack cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality N type to type N cable assembly for quick shipment worldwide. Variations of type N cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this N female to N female low loss cable 180 inch length using LMR-600-DB coax with heatshrink, LF solder. |
| 0 | ||
| PE3W07880/HS-180 | Pasternack Enterprises | Key Specifications, Connector 1 Series: N, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Right Angle, Connector 1 Impedance: 50 Ohm, Connector 2 Series: N, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Tri-Metal, RF Cable Part Number: LMR-600-DB, RF Cable Type: LMR-600-DB, RF Cable Impedance: 50 Ohm, Length, Max: 180 inches. N Male Right Angle to N Male Low Loss Cable 180 Inch Length Using LMR-600-DB Coax with HeatShrink., Radio frequency assembly N male right angle to N male low loss cable 180 inch length using LMR-600-DB coax with heatshrink from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The N male right angle to N male low loss cable 180 inch length using LMR-600-DB coax with heatshrink, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom type N to type N cable assembly orders will ship the same business day as well. Pasternack RF coax low loss cable assembly is built with a right angle type N cable connection on one end and a type N cable connection on the other. Our low loss right angle type N to type N cable assembly has a male gender on end 1 and a male on end 2. PE3W07880/HS-180 can also be known as a low loss right angle type N plug to type N plug cable assembly and will be shipped the same day as it is purchased. This flexible RF cable assembly with a 0.5-inch diameter has copper clad aluminum as the cable's inner conducting material and PE (F) dielectric type. This cable assembly employs durable and flexible materials, and with a 6-inch bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. Our PE3W07880/HS-180 RF cable has a PE jacket of 0.590-inch diameter. This radio frequency cable assembly can withstand temperatures ranging from -40 to 85 degrees C. The flexible RF cable has an in-series connection. This cable assembly has a typical propagation velocity of 87% and a minimum RF shielding of 90 dB. Our right angle type N male to type N male cable has a maximum VSWR of 1.4:1. Type N plug to type N plug cable assembly PE3W07880/HS-180 is built with LMR-600-DB which is a flexible coax type. The Pasternack flexible type N cable assembly is manufactured with right angle type N to type N cable connectors, has a 50 Ohm impedance, and is double shielded. Both the connectors have a crimp/solder attachment method and a brass body with tri-metal plating. Additional dimensions, specifications and CAD drawings for this low loss RF cable are available on our downloadable PDF datasheet. PE3W07880/HS-180 can also be used in the other direction and will be a type N male to right angle type N male cable assembly if the opposite connectivity is required. Low loss type N right angle plug to type N plug cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality type N to type N cable assembly for quick shipment worldwide. Variations of type N cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal type N to type N low loss RF cable assembly as per your requirements. LMR® is a registered trademark of Times Microwave Systems. |
| 0 | ||
| PE3W12421/HS-180 | Pasternack Enterprises | Key Specifications, Connector 1 Series: 7/16 DIN, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: N, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Tri-Metal, RF Cable Part Number: LMR-600-DB, RF Cable Type: LMR-600-DB, RF Cable Impedance: 50 Ohm, Length, Max: 180 inches. 7/16 DIN Male to N Male Low Loss Cable 180 Inch Length Using LMR-600-DB Coax with HeatShrink., Radio frequency assembly 7/16 DIN male to N male low loss cable 180 inch length using LMR-600-DB coax with heatshrink from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The 7/16 DIN male to N male low loss cable 180 inch length using LMR-600-DB coax with heatshrink, 7/16 DIN cable like our other Pasternack coaxial cable assemblies, will ship the same day and any custom 7/16 DIN to type N cable assembly orders will ship same day as well. Pasternack RF coax low loss cable assembly is built with 7/16 DIN cable connection on one end and type N cable connection on the other. Our low loss 7/16 DIN to N type cable assemblies have a male gender on end 1 and male on end 2. PE3W12421/HS-180 can also be known as a low loss 7/16 DIN plug to N type plug cable assembly and will be shipped same-day as it is purchased. 7/16 DIN plug to type N plug cable assembly PE3W12421/HS-180 is built with LMR-600-DB which is a flexible coax type. The Pasternack flexible 7/16 DIN cable assembly is manufactured with 7/16 DIN to type N cable connectors, has a 50 Ohm impedance and is double shielded. RF specs on this 3 GHz maximum frequency 7/16 DIN male to type N male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3W12421/HS-180 can also be used in the other direction and will be N type male to 7/16 DIN male cable assembly if the opposite connectivity is required. Low loss 7/16 DIN plug to type N plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality 7/16 DIN to N type cable assembly for quick shipment worldwide. Variations of 7/16 DIN cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this 7/16 DIN male to N male low loss cable 180 inch length using LMR-600-DB coax with heatshrink. |
| 0 | ||
| PE3C1446/HS-180 | Pasternack Enterprises | Key Specifications, Connector 1 Series: N, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Right Angle, Connector 1 Impedance: 50 Ohm, Connector 2 Series: N, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Right Angle, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Tri-Metal, RF Cable Part Number: LMR-600, RF Cable Type: LMR-600, RF Cable Impedance: 50 Ohm, Length, Max: 180 inches. N Male Right Angle to N Male Right Angle Low Loss Cable 180 Inch Length Using LMR-600 Coax with HeatShrink., Radio frequency assembly N male right angle to N male right angle low loss cable 180 inch length using LMR-600 coax with heatshrink from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The N male right angle to N male right angle low loss cable 180 inch length using LMR-600 coax with heatshrink, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom type N to type N cable assembly orders will ship the same business day as well. Pasternack RF coax low loss cable assembly is built with a right angle type N cable connection on one end and a right angle type N cable connection on the other. Our low loss right angle type N to right angle type N cable assembly has a male gender on end 1 and a male on end 2. PE3C1446/HS-180 can also be known as a low loss right angle type N plug to right angle type N plug cable assembly and will be shipped the same day as it is purchased. This flexible RF cable assembly with a 0.5-inch diameter has copper clad aluminum as the cable's inner conducting material and PE (F) dielectric type. This cable assembly employs durable and flexible materials, and with a 6-inch bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. Our PE3C1446/HS-180 RF cable has a PE jacket of 0.590-inch diameter. This radio frequency cable assembly can withstand temperatures ranging from -40 to 85 degrees C. The flexible RF cable has an in-series connection. This cable assembly has a typical propagation velocity of 87% and a minimum RF shielding of 90 dB. Our right angle type N male to right angle type N male cable has a maximum VSWR of 1.4:1. Type N plug to type N plug cable assembly PE3C1446/HS-180 is built with LMR-600 which is a flexible coax type. The Pasternack flexible type N cable assembly is manufactured with right angle type N to right angle type N cable connectors, has a 50 Ohm impedance, and is double shielded. Both the connectors have a crimp/solder attachment method and a brass body with tri-metal plating. Additional dimensions, specifications and CAD drawings for this low loss RF cable are available on our downloadable PDF datasheet. Low loss type N right angle plug to type N right angle plug cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality type N to type N cable assembly for quick shipment worldwide. Variations of type N cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal type N to type N low loss RF cable assembly as per your requirements. LMR® is a registered trademark of Times Microwave Systems. |
| 0 | ||
| PE3C2605/HS-180 | Pasternack Enterprises | Key Specifications, Connector 1 Series: N, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: N, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Tri-Metal, RF Cable Part Number: LMR-600-DB, RF Cable Type: LMR-600-DB, RF Cable Impedance: 50 Ohm, Length, Max: 180 inches. N Male to N Male Low Loss Cable 180 Inch Length Using LMR-600-DB Coax With Times Microwave Components with HeatShrink., Radio frequency assembly N male to N male low loss cable 180 inch length using LMR-600-DB coax with Times Microwave components with heatshrink from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The N male to N male low loss cable 180 inch length using LMR-600-DB coax with Times Microwave components with heatshrink, type N cable like our other Pasternack coaxial cable assemblies, will ship the same day and any custom type N to type N cable assembly orders will ship same day as well. Pasternack RF coax low loss cable assembly is built with N type cable connection on one end and type N cable connection on the other. Our low loss type N to N type cable assemblies have a male gender on end 1 and male on end 2. PE3C2605/HS-180 can also be known as a low loss type N plug to type N plug cable assembly and will be shipped same-day as it is purchased. N type plug to type N plug cable assembly PE3C2605/HS-180 is built with LMR-600-DB which is a flexible coax type. The Pasternack flexible N cable assembly is manufactured with N type to type N cable connectors, has a 50 Ohm impedance and is double shielded. RF specs on this 5.8 GHz maximum frequency type N male to type N male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. Low loss type N plug to N type plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality type N to type N cable assembly for quick shipment worldwide. Variations of N type cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this N male to N male low loss cable 180 inch length using LMR-600-DB coax with Times Microwave components with heatshrink. |
| 0 | ||
| PE3C0050/HS-180 | Pasternack Enterprises | Key Specifications, Connector 1 Series: N, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: N, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Right Angle, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Tri-Metal, RF Cable Part Number: LMR-600, RF Cable Type: LMR-600, RF Cable Impedance: 50 Ohm, Length, Max: 180 inches. N Male to N Male Right Angle Low Loss Cable 180 Inch Length Using LMR-600 Coax with HeatShrink., Radio frequency assembly N male to N male right angle low loss cable 180 inch length using LMR-600 coax with heatshrink from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The N male to N male right angle low loss cable 180 inch length using LMR-600 coax with heatshrink, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom type N to type N cable assembly orders will ship same day as well. Pasternack RF coax low loss cable assembly is built with N type cable connection on one end and right angle type N cable connection on the other. Our low loss N type to right angle type N cable assemblies have a male gender on end 1 and male on end 2. PE3C0050/HS-180 can also be known as a low loss type N plug to right angle type N plug cable assembly and will be shipped same-day as it is purchased. N type plug to N type plug cable assembly PE3C0050/HS-180 is built with LMR-600 which is a flexible coax type. The Pasternack flexible N cable assembly is manufactured with type N to right angle type N cable connectors, has a 50 Ohm impedance and is double shielded. RF specs on this 5.8 GHz maximum frequency N type male to type N right angle male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3C0050/HS-180 can also be used in the other direction and will be right angle type N male to type N male cable assembly if the opposite connectivity is required. Low loss N type plug to type N right angle plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality type N to type N cable assembly for quick shipment worldwide. Variations of N type cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this N male to N male right angle low loss cable 180 inch length using LMR-600 coax with heatshrink. |
| 0 | ||
 Venkel Ltd. | SHPI121245S-180MU | VENKEL LTD | Shielded High Power Inductor;121245;Standard;18uH;�20% RoHS : Compliant | 0 | ||
| SHPI121280S-180MU | VENKEL LTD | Shielded High Power Inductor;121280;Standard;18uH;�20% RoHS : Compliant | 0 | |||
| SHPI737334S-180MU | VENKEL LTD | Shielded High Power Inductor;737334;Standard;18uH;�20% RoHS : Compliant | 0 | |||
| SHPI121260S-180MU | VENKEL LTD | Shielded High Power Inductor;121260;Standard;18uH;�20% RoHS : Compliant | 0 | |||
| SHPI737345S-180MU | VENKEL LTD | Shielded High Power Inductor;737345;Standard;18uH;�20% RoHS : Compliant | 0 | |||
| SHPI121210S-180MU | VENKEL LTD | Shielded High Power Inductor;121210;Standard;18uH;�20% RoHS : Compliant | 0 | |||
| SHPI626650S-180MU | VENKEL LTD | Shielded High Power Inductor;626650;Standard;18uH;�20% RoHS : Compliant | 0 | |||
| SHPI626630S-180MU | VENKEL LTD | Shielded High Power Inductor;626630;Standard;18uH;�20% RoHS : Compliant | 0 | |||
 Vyrian | 6PS18012E4FG38393NWSA1 | Infineon Technologies AG | Insulated Gate Bipolar Transistor, 1200V V(BR)CES RoHS : Not Compliant | 12,206 | ||
| ADZS-180PWM-SAM | Analog Devices Inc | 10,856 | ||||
| DS1809U-010-T-R | Analog Devices (Maxim Integrated) | 10,468 | ||||
| DS1804NZ-100 | Analog Devices Inc | Digital Potentiometer, CMOS, PDSO8 RoHS : Not Compliant | 10,008 | |||
| DS1809Z-100+TR | Analog Devices Inc | Interface Circuit RoHS : Compliant | 9,865 | |||
| DS1809-100S | Analog Devices Inc | Digital Potentiometer, PDSO8 RoHS : Not Compliant | 9,430 | |||
| DS1803Z-050+TR | Analog Devices (Maxim Integrated) | 9,392 | ||||
| SN54ALS1804AJ | Texas Instruments | NAND Gate, ALS Series, 6-Func, 2-Input, TTL, CDIP20 RoHS : Not Compliant | 8,606 | |||
| SNJ54AS1804J | Texas Instruments | NAND Gate, AS Series, 6-Func, 2-Input, TTL, CDIP20 RoHS : Not Compliant | 7,824 | |||
| DS1803E-50-T-R | Analog Devices (Maxim Integrated) | 6,532 | ||||
| SN65LVDS180IPWRAN | Texas Instruments | 6,483 | ||||
| DS1806E-100+ | Analog Devices Inc | Digital Potentiometer, 100000ohm, 3-wire Serial Control Interface, 64 Positions, PDSO20 RoHS : Compliant | 5,763 | |||
| 2PS18012E44G40113NOSA1 | Infineon Technologies AG | Insulated Gate Bipolar Transistor, 1200V V(BR)CES, N-Channel RoHS : Not Compliant | 5,752 | |||
| SN74AS1808NP3 | Texas Instruments | AND Gate, TTL, PDIP20 RoHS : Not Compliant | 5,135 | |||
| EP2S180F1020I5 | Intel / Altera | Field Programmable Gate Array, 179400-Cell, CMOS, PBGA1020 | 3,154 | |||
 Win Source Electronics | DS1803E-100 | Maxim Integrated Products | IC DGT POT 100KOHM 256TP 14TSSOP / Addressable Dual Digital Potentiometer RoHS : Not Compliant |
| 40,000 | |
| DS1803E-100+T&R | Maxim Integrated Products | Digital Potentiometer 256POS 100k Ohm 2Pot 14-Pin TSSOP T/R RoHS : Compliant |
| 37,590 | ||
TVS1800DRVR | Texas Instruments | UNIDIR PRECISION SURGE DIODE / RoHS : Compliant |
| 31,840 | ||
DS1804Z-010+ | Maxim Integrated Products | IC POT TRIMMER NV 10KOHM 8-SOIC / Digital Potentiometer 10kOhm 100POS Non-Volatile Linear 8-Pin SOIC N Tube RoHS : Compliant |
| 30,000 | ||
| DS1804Z-010 | Maxim Integrated Products | IC DGTL POT 10KOHM 100TAP 8SOIC RoHS : Not Compliant |
| 30,000 | ||
| SN65LVDS180PW | Texas Instruments | IC HS DIFF LINEDRVR/RCVR 14TSSOP RoHS : Compliant |
| 6,436 | ||
| SN65LVDS180PWR | Texas Instruments | HIGH-SPEED DIFFERENTIAL LINE DRIVERS AND RECEIVERS | IC DIFF LINE DVR/RCVR HS 14TSSOP RoHS : Compliant |
| 6,080 | ||
SN75ALS180DR | Texas Instruments | IC DIFF DRVR/RCVR PAIR 14-SOIC RoHS : Compliant |
| 5,500 | ||
| DS1804Z-010+T&R | Maxim Integrated Products | IC POT TRIMMER NV 10KOHM 8-SOIC RoHS : Compliant |
| 5,000 | ||
| DS1805E-010+ | Maxim Integrated Products | IC DGT POT 10KOHM 256TAP 14TSSOP RoHS : Compliant |
| 3,472 | ||
| DS1805E-010 | Maxim Integrated Products | IC DGT POT 10KOHM 256TAP 14TSSOP RoHS : Not Compliant |
| 3,472 | ||
SN75ALS180DG4 | Texas Instruments | DIFFERENTIAL DRIVER AND RECEIVER PAIRS RoHS : Compliant |
| 3,190 | ||
| SN75ALS180DRG4 | Texas Instruments | IC DIFF LINE DRVR/RCVR 14-SOIC RoHS : Compliant |
| 3,190 | ||
| EP2S180F1020I4 | Intel Corporation | IC FPGA 742 I/O 1020FBGA RoHS : Not Compliant |
| 500 | ||
| EP2S180F1020I4N | Altera Corporation | IC FPGA 742 I/O 1020FBGA RoHS : Compliant |
| 500 |
| Does ALLDATASHEET help your business so far? [ DONATE ] |
About Alldatasheet | Advertisement | Contact us | Privacy Policy | Link to Datasheet | Link Exchange | Manufacturer List All Rights Reserved짤Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |
British ▼ 
English
Chinese
German
Japanese
Russian
Korean
Spanish
French
Italian
Portuguese
Polish
Vietnamese
Indian
Mexican
New Zealand