 |
Electronic Components Datasheet Search |
|
|
Electronic Components Datasheet Search |
|
S72FBJ-R Distributor |
| Distributor | Part # | Manufacturer | Description | Price | Qty. BuyNow | |
 NexGen Digital | ACS725LLCTR-40AB-T | Allegro MicroSystems LLC | RoHS : Compliant | 6,000 | ||
| 0603CS-72NXJLW | Coilcraft Inc | RoHS : Compliant | 1,942 | |||
TPS72501DCQR | Texas Instruments | RoHS : Compliant | 718 | |||
TPS72501KTT | Texas Instruments | RoHS : Not Compliant | 250 | |||
TPS72118DBVT | Texas Instruments | RoHS : Compliant | 150 | |||
| PS7200A-1A-A | NEC Electronics Group | RoHS : Compliant | 94 | |||
 Rutronik | BTS721L1XUMA1 | Infineon Technologies AG | 4xHSS 100mOhm 34V SO-20 SMD RoHS : Compliant |
| 1,000 | |
| BTS72004EPADAUGHBRDTOBO1 | Infineon Technologies AG | Daughterboard 35V RoHS : Compliant |
| 3 | ||
| MS72SF1 | MINEW | Millimeter Wave Radar RoHS : Compliant |
| 1 | ||
 Maritex | BTS724G | Infineon Technologies AG | Specialty Drivers; BTS724G; INFINEON TECHNOLOGIES; 4; 4; 40 V; Tape & Reel RoHS : Compliant |
| 14,169 | |
| BTS7200-4EPA | Infineon Technologies AG | Power Management ICs (PMICs); BTS7200-4EPA; INFINEON TECHNOLOGIES; 18 V RoHS : Compliant |
| 2,839 | ||
TPS72325DBVR | Texas Instruments | LDO Regulators; TPS72325DBVR; TEXAS INSTRUMENTS; 5; 1; 200 mA; -2.5 V RoHS : Compliant |
| 2,808 | ||
| TACTWS72H43I200 | Innocent Electronics Co Ltd | Tact Switch; SMD; dimensions: 7.2x7.2; h=4.3mm; waterproof; operating force 200gf; button: round |
| 798 | ||
TSS721ADR | Texas Instruments | Other Interface ICs; TSS721ADR; TEXAS INSTRUMENTS; 16; 3.4 V; 3.1 V; SOIC RoHS : Compliant |
| 652 | ||
| TACTWS72H90B160 | Innocent Electronics Co Ltd | Tact Switch; SMD; dimensions: 7.2x7.2; h=9.0mm; waterproof; operating force 160gf; button: round |
| 530 | ||
| ACS724LLCTR-10AB-T | Allegro MicroSystems LLC | Current Sensors; ACS724LLCTR-10AB-T; ALLEGRO MICROSYSTEMS; 1.5 %; 200 mV/A; Tape & Reel (TR); 120 kHz RoHS : Compliant |
| 487 | ||
| HR25-7TP-8S(72) | Hirose Electric Co Ltd | Circular Connectors; HR25-7TP-8S(72); HIROSE ELECTRIC; 8; 8; Cable, Free Hanging; No RoHS : Compliant |
| 40 | ||
| TPS72301DBVR | Texas Instruments | LDO Regulators; TPS72301DBVR; TEXAS INSTRUMENTS; 5; 1; 200 mA; -10 V RoHS : Compliant |
| 22 | ||
TPS72733DSER | Texas Instruments | LDO Regulators; TPS72733DSER; TEXAS INSTRUMENTS; 6; 1; 250 mA; 3.3 V RoHS : Compliant |
| 22 | ||
| ACS724LLCTR-20AB-T | Allegro MicroSystems LLC | Current Sensors; ACS724LLCTR-20AB-T; ALLEGRO MICROSYSTEMS; 1.5 %; 100 mV/A; Tape & Reel (TR); 120 kHz RoHS : Compliant |
| 2 | ||
 Pasternack Enterprises US | PE3W00417/HS-72 | Pasternack Enterprises | Key Specifications, Connector 1 Series: N, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: N, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Tri-Metal, RF Cable Part Number: RG223/U, RF Cable Type: RG223, RF Cable Impedance: 50 Ohm, Length, Max: 72 inches. N Male to N Male Cable 72 Inch Length Using RG223 Coax with HeatShrink., Radio frequency assembly N male to N male cable 72 inch length using RG223 coax with heatshrink from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, general use, etc. The N male to N male cable 72 inch length using RG223 coax with heatshrink, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom type N to type N cable assembly orders will ship the same business day as well. Pasternack RF coax cable assembly is built with a type N cable connection on one end and a type N cable connection on the other. Our type N to type N cable assembly has a male gender on end 1 and a male on end 2. PE3W00417/HS-72 can also be known as a type N plug to type N plug cable assembly and will be shipped the same day as it is purchased. This flexible RF cable assembly with a 0.5-inch diameter has copper as the cable's inner conducting material and PE dielectric type. This cable assembly employs durable and flexible materials, and with a 1-inch bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. Our PE3W00417/HS-72 RF cable has a PVC jacket of 0.209-inch diameter. This radio frequency cable assembly can withstand temperatures ranging from -40 to 80 degrees C. The flexible RF cable has an in-series connection. Our type N male to type N male cable has a maximum VSWR of 1.4:1. Type N plug to type N plug cable assembly PE3W00417/HS-72 is built with RG223 which is a flexible coax type. The Pasternack flexible type N cable assembly is manufactured with type N to type N cable connectors, has a 50 Ohm impedance, and is double shielded. Both the connectors have a crimp/solder attachment method and a brass body with tri-metal plating. Additional dimensions, specifications and CAD drawings for this RF cable are available on our downloadable PDF datasheet. Type N plug to type N plug cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality type N to type N cable assembly for quick shipment worldwide. Variations of type N cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal type N to type N RF cable assembly as per your requirements. |
| 1,323 | |
| PE3W06125LF/HS-72 | Pasternack Enterprises | Key Specifications, Connector 1 Series: TNC, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Right Angle, Connector 1 Impedance: 50 Ohm, Connector 2 Series: SMA, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Right Angle, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: LMR-200, RF Cable Type: LMR-200, RF Cable Impedance: 50 Ohm, Length, Max: 72 inches. TNC Male Right Angle to SMA Male Right Angle Low Loss Cable 72 Inch Length Using LMR-200 Coax with HeatShrink, LF Solder., Radio frequency assembly TNC male right angle to SMA male right angle low loss cable 72 inch length using LMR-200 coax with heatshrink, LF solder from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The TNC male right angle to SMA male right angle low loss cable 72 inch length using LMR-200 coax with heatshrink, LF solder, TNC cable like our other Pasternack coaxial cable assemblies, will ship the same day and any custom TNC to SMA cable assembly orders will ship same day as well. Pasternack RF coax low loss cable assembly is built with right angle TNC cable connection on one end and right angle SMA cable connection on the other. Our low loss right angle TNC to right angle SMA cable assemblies have a male gender on end 1 and male on end 2. PE3W06125LF/HS-72 can also be known as a low loss right angle TNC plug to right angle SMA plug cable assembly and will be shipped same-day as it is purchased. TNC plug to SMA plug cable assembly PE3W06125LF/HS-72 is built with LMR-200 which is a flexible coax type. The Pasternack flexible TNC cable assembly is manufactured with right angle TNC to right angle SMA cable connectors, has a 50 Ohm impedance and is double shielded. RF specs on this 5.8 GHz maximum frequency TNC right angle male to SMA right angle male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3W06125LF/HS-72 can also be used in the other direction and will be right angle SMA male to right angle TNC male cable assembly if the opposite connectivity is required. Low loss TNC right angle plug to SMA right angle plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality TNC to SMA cable assembly for quick shipment worldwide. Variations of TNC cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this TNC male right angle to SMA male right angle low loss cable 72 inch length using LMR-200 coax with heatshrink, LF solder. |
| 133 | ||
| PE71S7293 | Pasternack Enterprises | Key Specifications, Connector Series: 2.92mm, Connector Gender: Female, Switch Design: SP6T, Minimum Frequency: DC, Maximum Frequency: 43 GHz, Maximum Input Power (CW): 10 Watts, Maximum VSWR: 2.1:1, Maximum Insertion Loss: 1.6 dB, Minimum Isolation: 40 dB. SP6T, Electromechanical Relay Normally Open Switch, DC to 43 GHz, 12VDC, 10W, Indicators, TTL, Diodes, D-Sub, 2.92mm. The PE71S7293 electromechanical RF relay switch from Pasternack is available in a SP6T switch design with normally open actuator. This RF relay SP6T switch with a 2.92mm female connector has a maximum frequency of 43 GHz. The maximum switching speed of this radio frequency SP6T electromechanical switch is 20ms. Pasternack’s PE71S7293 relay switch comes with a maximum VSWR of 2.1:1 and a maximum insertion loss of 1.6 dB. This electromechanical RF relay switch is available in 1.75-inch length, 1.75-inch height and 1.75-inch width. The RF relay switch with d-subminiature has a typical operating voltage of 12 Volts. Our radio frequency electromechanical relay switch from Pasternack can operates at a temperatures ranging from -25 to 65 deg C. This PE71S7293 SP6T electromechanical RF relay normally open switch features indicators, TTL logic and diodes. This normally open RF switch with a 2.92mm female connector has a minimum isolation of 40 dB. Additional dimensions and specifications for this electromechanical relay switch are on our downloadable PDF datasheet above. Our PE71S7293 electroless nickel finished RF switch has a maximum actuating set current of 400 mA. SP6T electromechanical relay radio frequency normally open switch PE71S7293 is part of our RF, microwave, and millimeter wave components available from Pasternack. Our SP6T coaxial RF relay electromechanical relay switch can ship worldwide the same business day that it is bought, as with our other available RF parts. For further information on similar products, our expert technical support and knowledgeable sales team can help you get the ideal RF normally open switches for your requirements. |
| 2 | ||
| PE3234/HS-72 | Pasternack Enterprises | Key Specifications, Connector 1 Series: SMA, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: N, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: RG316/U, RF Cable Type: RG316, RF Cable Impedance: 50 Ohm, Length, Max: 72 inches. SMA Male to N Male Cable 72 Inch Length Using RG316 Coax with HeatShrink., Radio frequency assembly SMA male to N male cable 72 inch length using RG316 coax with heatshrink from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, general use, etc. The SMA male to N male cable 72 inch length using RG316 coax with heatshrink, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom SMA to type N cable assembly orders will ship the same business day as well. Pasternack RF coax cable assembly is built with a SMA cable connection on one end and a type N cable connection on the other. Our SMA to type N cable assembly has a male gender on end 1 and a male on end 2. PE3234/HS-72 can also be known as a SMA plug to type N plug cable assembly and will be shipped the same day as it is purchased. This flexible RF cable assembly with a 0.5-inch diameter has copper clad steel as the cable's inner conducting material and PTFE dielectric type. Our PE3234/HS-72 RF cable has a FEP jacket of 0.102-inch diameter. This radio frequency cable assembly can withstand temperatures ranging from -55 to 165 degrees C. The flexible RF cable has a between series connection. Our SMA male to type N male cable has a maximum VSWR of 1.4:1. SMA plug to type N plug cable assembly PE3234/HS-72 is built with RG316 which is a flexible coax type. The Pasternack flexible SMA cable assembly is manufactured with SMA to type N cable connectors, has a 50 Ohm impedance, and is single shielded. One connector features the crimp/crimp attachment method and a brass body with nickel plating, while the other has the crimp/solder attachment method and a brass body with nickel plating. Additional dimensions, specifications and CAD drawings for this RF cable are available on our downloadable PDF datasheet. PE3234/HS-72 can also be used in the other direction and will be a type N male to SMA male cable assembly if the opposite connectivity is required. SMA plug to type N plug cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality SMA to type N cable assembly for quick shipment worldwide. Variations of SMA and type N cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal SMA to type N RF cable assembly as per your requirements. |
| 0 | ||
| PE3373/HS-72 | Pasternack Enterprises | Key Specifications, Connector 1 Series: BNC, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Right Angle, Connector 1 Impedance: 50 Ohm, Connector 2 Series: BNC, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Right Angle, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: RG174A/U, RF Cable Type: RG174, RF Cable Impedance: 50 Ohm, Length, Max: 72 inches. BNC Male Right Angle to BNC Male Right Angle Cable 72 Inch Length Using RG174 Coax with HeatShrink., Radio frequency assembly BNC male right angle to BNC male right angle cable 72 inch length using RG174 coax with heatshrink from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. The BNC male right angle to BNC male right angle cable 72 inch length using RG174 coax with heatshrink, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom BNC to BNC cable assembly orders will ship same business day as well. Pasternack RF coax cable assembly is built with right angle BNC cable connection on one end and right angle BNC cable connection on the other. Our right angle BNC to right angle BNC cable assembly has male gender on end 1 and male on end 2. PE3373/HS-72 can also be known as a right angle BNC plug to right angle BNC plug cable assembly and will be shipped same-day as it is purchased. This RF cable assembly with 0.5 inches diameter has copper clad steel as cable inner conducting material and PE (LD) dielectric type. BNC plug to BNC plug cable assembly PE3373/HS-72 is built with RG174 which is a flexible coax type. The Pasternack flexible BNC cable assembly is manufactured with right angle BNC to right angle BNC cable connectors, has a 50 Ohm impedance and is single shielded. Both the connectors have a crimp/solder attachment method and a brass body with nickel plating. Additional dimensions, specifications and CAD drawings for this PE3373/HS-72 RF cable are available on our downloadable PDF datasheet. BNC right angle plug to BNC right angle plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality BNC to BNC cable assembly for quick shipment worldwide. Variations of BNC cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured.For further information on similar products, our expert technical support and trained sales team can get you the ideal BNC RF cable assembly as per your requirements. |
| 0 | ||
| PE34278/HS-72 | Pasternack Enterprises | Key Specifications, Connector 1 Series: SMA, Connector 1 Gender: Female, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: BNC, Connector 2 Gender: Female, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: RG316/U, RF Cable Type: RG316, RF Cable Impedance: 50 Ohm, Length, Max: 72 inches. SMA Female to BNC Female Cable 72 Inch Length Using RG316 Coax with HeatShrink., Radio frequency assembly SMA female to BNC female cable 72 inch length using RG316 coax with heatshrink from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, general use, etc. The SMA female to BNC female cable 72 inch length using RG316 coax with heatshrink, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom SMA to BNC cable assembly orders will ship the same business day as well. Pasternack RF coax cable assembly is built with a SMA cable connection on one end and a BNC cable connection on the other. Our SMA to BNC cable assembly has a female gender on end 1 and a female on end 2. PE34278/HS-72 can also be known as a SMA jack to BNC jack cable assembly and will be shipped the same day as it is purchased. This flexible RF cable assembly with a 0.5-inch diameter has copper clad steel as the cable's inner conducting material and PTFE dielectric type. Our PE34278/HS-72 RF cable has a FEP jacket of 0.102-inch diameter. This radio frequency cable assembly can withstand temperatures ranging from -55 to 165 degrees C. The flexible RF cable has a between series connection. Our SMA female to BNC female cable has a maximum VSWR of 1.4:1. SMA jack to BNC jack cable assembly PE34278/HS-72 is built with RG316 which is a flexible coax type. The Pasternack flexible SMA cable assembly is manufactured with SMA to BNC cable connectors, has a 50 Ohm impedance, and is single shielded. Both the connectors have a crimp/solder attachment method and a brass body with nickel plating. Additional dimensions, specifications and CAD drawings for this RF cable are available on our downloadable PDF datasheet. PE34278/HS-72 can also be used in the other direction and will be a BNC female to SMA female cable assembly if the opposite connectivity is required. SMA jack to BNC jack cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality SMA to BNC cable assembly for quick shipment worldwide. Variations of SMA and BNC cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal SMA to BNC RF cable assembly as per your requirements. |
| 0 | ||
| PE3515LF/HS-72 | Pasternack Enterprises | Key Specifications, Connector 1 Series: SMA, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Right Angle, Connector 1 Impedance: 50 Ohm, Connector 2 Series: SMA, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Right Angle, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: RG316/U, RF Cable Type: RG316, RF Cable Impedance: 50 Ohm, Length, Max: 72 inches. SMA Male Right Angle to SMA Male Right Angle Cable 72 Inch Length Using RG316 Coax with HeatShrink, LF Solder., Radio frequency assembly SMA male right angle to SMA male right angle cable 72 inch length using RG316 coax with heatshrink, LF solder from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. The SMA male right angle to SMA male right angle cable 72 inch length using RG316 coax with heatshrink, LF solder, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom SMA to SMA cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with right angle SMA cable connection on one end and right angle SMA cable connection on the other. Our right angle SMA to right angle SMA cable assemblies have a male gender on end 1 and male on end 2. PE3515LF/HS-72 can also be known as a right angle SMA plug to right angle SMA plug cable assembly and will be shipped same-day as it is purchased. SMA plug to SMA plug cable assembly PE3515LF/HS-72 is built with RG316 which is a flexible coax type. The Pasternack flexible SMA cable assembly is manufactured with right angle SMA to right angle SMA cable connectors, has a 50 Ohm impedance and is single shielded. RF specs on this 3 GHz maximum frequency SMA right angle male to SMA right angle male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. SMA right angle plug to SMA right angle plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality SMA to SMA cable assembly for quick shipment worldwide. Variations of SMA cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this SMA male right angle to SMA male right angle cable 72 inch length using RG316 coax with heatshrink, LF solder. |
| 0 | ||
| PE36780/HS-72 | Pasternack Enterprises | Key Specifications, Connector 1 Series: TNC, Connector 1 Gender: Plug, Connector 1 Polarity: Reverse Polarity, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: TNC, Connector 2 Gender: Plug, Connector 2 Polarity: Reverse Polarity, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: RG316/U, RF Cable Type: RG316, RF Cable Impedance: 50 Ohm, Length, Max: 72 inches. Reverse Polarity TNC Plug to Reverse Polarity TNC Plug Cable 72 Inch Length Using RG316 Coax with HeatShrink., Radio frequency assembly reverse polarity TNC plug to reverse polarity TNC plug cable 72 inch length using RG316 coax with heatshrink from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. The Reverse polarity TNC plug to reverse polarity TNC plug cable 72 inch length using RG316 coax with heatshrink, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom TNC to TNC cable assembly orders will ship same business day as well. Pasternack RF coax cable assembly is built with reverse polarity TNC cable connection on one end and reverse polarity TNC cable connection on the other. Our reverse polarity TNC to reverse polarity TNC cable assembly has plug gender on end 1 and plug on end 2. PE36780/HS-72 can also be known as a reverse polarity TNC male to reverse polarity TNC male cable assembly and will be shipped same-day as it is purchased. This RF cable assembly with 0.5 inches diameter has copper clad steel as cable inner conducting material and PTFE dielectric type. Reverse polarity TNC male to reverse polarity TNC male cable assembly PE36780/HS-72 is built with RG316 which is a flexible coax type. The Pasternack flexible reverse polarity TNC cable assembly is manufactured with TNC to TNC cable connectors, has a 50 Ohm impedance and is single shielded. Both the connectors have a crimp/solder attachment method and a brass body with nickel plating. Additional dimensions, specifications and CAD drawings for this PE36780/HS-72 RF cable are available on our downloadable PDF datasheet. TNC reverse polarity male to TNC reverse polarity male cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality TNC to TNC cable assembly for quick shipment worldwide. Variations of TNC cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured.For further information on similar products, our expert technical support and trained sales team can get you the ideal TNC RF cable assembly as per your requirements. |
| 0 | ||
| PE3C1708/HS-72 | Pasternack Enterprises | Key Specifications, Connector 1 Series: FAKRA, Connector 1 Gender: Jack, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: BNC, Connector 2 Gender: Female, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Plastic, RF Cable Part Number: RG316/U, RF Cable Type: RG316, RF Cable Impedance: 50 Ohm, Length, Max: 72 inches. Water Blue FAKRA Jack to BNC Female Cable 72 Inch Length Using RG316 Coax with HeatShrink., Radio frequency assembly water blue FAKRA jack to BNC female cable 72 inch length using RG316 coax with heatshrink from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. The Water blue FAKRA jack to BNC female cable 72 inch length using RG316 coax with heatshrink, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom FAKRA to BNC cable assembly orders will ship same business day as well. Pasternack RF coax cable assembly is built with FAKRA cable connection on one end and BNC cable connection on the other. Our FAKRA to BNC cable assembly has jack gender on end 1 and female on end 2. PE3C1708/HS-72 can also be known as a FAKRA female to BNC jack cable assembly and will be shipped same-day as it is purchased. This RF cable assembly with 0.5 inches diameter has copper clad steel as cable inner conducting material and PTFE dielectric type. FAKRA female to BNC jack cable assembly PE3C1708/HS-72 is built with RG316 which is a flexible coax type. The Pasternack flexible FAKRA cable assembly is manufactured with FAKRA to BNC cable connectors, has a 50 Ohm impedance and is single shielded. Both the connectors have a crimp/solder attachment method and a plastic body with plating. Additional dimensions, specifications and CAD drawings for this PE3C1708/HS-72 RF cable are available on our downloadable PDF datasheet.PE3C1708/HS-72 can also be used in the other direction and will be BNC female to FAKRA jack cable assembly if the opposite connectivity is required. FAKRA female to BNC jack cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality FAKRA to BNC cable assembly for quick shipment worldwide. Variations of FAKRA cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured.For further information on similar products, our expert technical support and trained sales team can get you the ideal FAKRA RF cable assembly as per your requirements. |
| 0 | ||
| PE3977/HS-72 | Pasternack Enterprises | Key Specifications, Connector 1 Series: N, Connector 1 Gender: Female, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: N, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: RG393/U, RF Cable Type: RG393, RF Cable Impedance: 50 Ohm, Length, Max: 72 inches. N Female to N Male Cable 72 Inch Length Using RG393 Coax with HeatShrink., Radio frequency assembly N female to N male cable 72 inch length using RG393 coax with heatshrink from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, general use, etc. The N female to N male cable 72 inch length using RG393 coax with heatshrink, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom type N to type N cable assembly orders will ship the same business day as well. Pasternack RF coax cable assembly is built with a type N cable connection on one end and a type N cable connection on the other. Our type N to type N cable assembly has a female gender on end 1 and a male on end 2. PE3977/HS-72 can also be known as a type N jack to type N plug cable assembly and will be shipped the same day as it is purchased. This flexible RF cable assembly with a 0.5-inch diameter has copper as the cable's inner conducting material and PTFE dielectric type. This cable assembly employs durable and flexible materials, and with a 3.9-inch bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. Our PE3977/HS-72 RF cable has a FEP jacket of 0.390-inch diameter. This radio frequency cable assembly can withstand temperatures ranging from -55 to 165 degrees C. The flexible RF cable has an in-series connection. Our type N female to type N male cable has a maximum VSWR of 1.4:1. Type N jack to type N plug cable assembly PE3977/HS-72 is built with RG393 which is a flexible coax type. The Pasternack flexible type N cable assembly is manufactured with type N to type N cable connectors, has a 50 Ohm impedance, and is double shielded. Both the connectors have a crimp/solder attachment method and a brass body with nickel plating. Additional dimensions, specifications and CAD drawings for this RF cable are available on our downloadable PDF datasheet. PE3977/HS-72 can also be used in the other direction and will be a type N male to type N female cable assembly if the opposite connectivity is required. Type N jack to type N plug cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality type N to type N cable assembly for quick shipment worldwide. Variations of type N cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal type N to type N RF cable assembly as per your requirements. |
| 0 | ||
| PE3W01511/HS-72 | Pasternack Enterprises | Key Specifications, Connector 1 Series: SMA, Connector 1 Gender: Plug, Connector 1 Polarity: Reverse Polarity, Connector Angle 1: Right Angle, Connector 1 Impedance: 50 Ohm, Connector 2 Series: BNC, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: RG174A/U, RF Cable Type: RG174, RF Cable Impedance: 50 Ohm, Length, Max: 72 inches. Reverse Polarity SMA Plug Right Angle to BNC Male Cable 72 Inch Length Using RG174 Coax with HeatShrink., Radio frequency assembly reverse polarity SMA plug right angle to BNC male cable 72 inch length using RG174 coax with heatshrink from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, general use, etc. The reverse polarity SMA plug right angle to BNC male cable 72 inch length using RG174 coax with heatshrink, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom SMA to BNC cable assembly orders will ship the same business day as well. Pasternack RF coax cable assembly is built with a right angle reverse polarity SMA cable connection on one end and a BNC cable connection on the other. Our right angle reverse polarity SMA to BNC cable assembly has a plug gender on end 1 and a male on end 2. PE3W01511/HS-72 can also be known as a right angle reverse polarity SMA male to BNC plug cable assembly and will be shipped the same day as it is purchased. This flexible RF cable assembly with a 0.5-inch diameter has copper clad steel as the cable's inner conducting material and PE dielectric type. Our PE3W01511/HS-72 RF cable has a PVC jacket of 0.110-inch diameter. The flexible RF cable has a between series connection. Reverse polarity SMA male to BNC plug cable assembly PE3W01511/HS-72 is built with RG174 which is a flexible coax type. The Pasternack flexible reverse polarity SMA cable assembly is manufactured with right angle SMA to BNC cable connectors, has a 50 Ohm impedance, and is single shielded. One connector features the crimp/solder attachment method and a brass body with nickel plating, while the other has the crimp/crimp attachment method and a brass body with nickel plating. Additional dimensions, specifications and CAD drawings for this RF cable are available on our downloadable PDF datasheet. PE3W01511/HS-72 can also be used in the other direction and will be a BNC male to right angle reverse polarity SMA plug cable assembly if the opposite connectivity is required. SMA reverse polarity right angle male to BNC plug cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality SMA to BNC cable assembly for quick shipment worldwide. Variations of SMA and BNC cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal SMA to BNC RF cable assembly as per your requirements. |
| 0 | ||
| PE3W03971/HS-72 | Pasternack Enterprises | Key Specifications, Connector 1 Series: SSMB, Connector 1 Gender: Plug, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: SMA, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Gold, RF Cable Part Number: RG316/U, RF Cable Type: RG316, RF Cable Impedance: 50 Ohm, Length, Max: 72 inches. SSMB Plug to SMA Male Cable 72 Inch Length Using RG316 Coax with HeatShrink., Radio frequency assembly SSMB plug to SMA male cable 72 inch length using RG316 coax with heatshrink from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. The SSMB plug to SMA male cable 72 inch length using RG316 coax with heatshrink, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom SSMB to SMA cable assembly orders will ship same business day as well. Pasternack RF coax cable assembly is built with SSMB cable connection on one end and SMA cable connection on the other. Our SSMB to SMA cable assembly has plug gender on end 1 and male on end 2. PE3W03971/HS-72 can also be known as a SSMB male to SMA plug cable assembly and will be shipped same-day as it is purchased. This RF cable assembly with 0.5 inches diameter has copper clad steel as cable inner conducting material and PTFE dielectric type. SSMB male to SMA plug cable assembly PE3W03971/HS-72 is built with RG316 which is a flexible coax type. The Pasternack flexible SSMB cable assembly is manufactured with SSMB to SMA cable connectors, has a 50 Ohm impedance and is single shielded. Both the connectors have a crimp/solder attachment method and a brass body with gold plating. Additional dimensions, specifications and CAD drawings for this PE3W03971/HS-72 RF cable are available on our downloadable PDF datasheet.PE3W03971/HS-72 can also be used in the other direction and will be SMA male to SSMB plug cable assembly if the opposite connectivity is required. SSMB male to SMA plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality SSMB to SMA cable assembly for quick shipment worldwide. Variations of SSMB cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured.For further information on similar products, our expert technical support and trained sales team can get you the ideal SSMB RF cable assembly as per your requirements. |
| 0 | ||
| PE3W10593/HS-72 | Pasternack Enterprises | Key Specifications, Connector 1 Series: SSMB, Connector 1 Gender: Plug, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: SMA, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Gold, RF Cable Part Number: RG174A/U, RF Cable Type: RG174, RF Cable Impedance: 50 Ohm, Length, Max: 72 inches. SSMB Plug to SMA Male Cable 72 Inch Length Using RG174 Coax with HeatShrink., Radio frequency assembly SSMB plug to SMA male cable 72 inch length using RG174 coax with heatshrink from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, general use, etc. The SSMB plug to SMA male cable 72 inch length using RG174 coax with heatshrink, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom SSMB to SMA cable assembly orders will the ship same business day as well. Pasternack RF coax cable assembly is built with a SSMB cable connection on one end and a SMA cable connection on the other. Our a SSMB to a SMA cable assembly has plug gender on end 1 and male on end 2. PE3W10593/HS-72 can also be known as a SSMB male to SMA plug cable assembly and will be shipped the same day as it is purchased. This RF cable assembly with a 0.5-inch diameter has copper clad steel as the cable's inner conducting material and PE dielectric type. Our PE3W10593/HS-72 RF cable has a PVC jacket of 0.110-inch diameter. This radio frequency cable assembly can withstand temperatures ranging from -40 to 80 degrees C. The flexible RF cable has a between series connection. SSMB male to SMA plug cable assembly PE3W10593/HS-72 is built with RG174 which is a flexible coax type. The Pasternack flexible SSMB cable assembly is manufactured with SSMB to SMA cable connectors and has a 50 Ohm impedance, and is single shielded. Both the connectors have a crimp/solder attachment method and a brass body. Additional dimensions, specifications and CAD drawings for this RF cable are available on our downloadable PDF datasheet. PE3W10593/HS-72 can also be used in the other direction and will be SMA male to SSMB plug cable assembly if the opposite connectivity is required. SSMB male to SMA plug cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality SSMB to SMA cable assembly for quick shipment worldwide. Variations of SSMB and SMA cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal SSMB to SMA RF cable assembly as per your requirements. |
| 0 | ||
| PE34366/HS-72 | Pasternack Enterprises | Key Specifications, Connector 1 Series: N, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: BNC, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Right Angle, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: RG214/U, RF Cable Type: RG214, RF Cable Impedance: 50 Ohm, Length, Max: 72 inches. N Male to BNC Male Right Angle Cable 72 Inch Length Using RG214 Coax with HeatShrink., Radio frequency assembly N male to BNC male right angle cable 72 inch length using RG214 coax with heatshrink from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, general use, etc. The N male to BNC male right angle cable 72 inch length using RG214 coax with heatshrink, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom type N to BNC cable assembly orders will ship the same business day as well. Pasternack RF coax cable assembly is built with a type N cable connection on one end and a right angle BNC cable connection on the other. Our type N to right angle BNC cable assembly has a male gender on end 1 and a male on end 2. PE34366/HS-72 can also be known as a type N plug to right angle BNC plug cable assembly and will be shipped the same day as it is purchased. This flexible RF cable assembly with a 0.5-inch diameter has copper as the cable's inner conducting material and PE dielectric type. This cable assembly employs durable and flexible materials, and with a 1.6-inch bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. Our PE34366/HS-72 RF cable has a PVC jacket of 0.425-inch diameter. This radio frequency cable assembly can withstand temperatures ranging from -20 to 80 degrees C. The flexible RF cable has a between series connection. Our type N male to right angle BNC male cable has a maximum VSWR of 1.4:1. Type N plug to BNC plug cable assembly PE34366/HS-72 is built with RG214 which is a flexible coax type. The Pasternack flexible type N cable assembly is manufactured with type N to right angle BNC cable connectors, has a 50 Ohm impedance, and is double shielded. One connector features the crimp/solder attachment method and a brass body with nickel plating, while the other has the clamp/solder attachment method and a brass body with nickel plating. Additional dimensions, specifications and CAD drawings for this RF cable are available on our downloadable PDF datasheet. PE34366/HS-72 can also be used in the other direction and will be a right angle BNC male to type N male cable assembly if the opposite connectivity is required. Type N plug to BNC right angle plug cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality type N to BNC cable assembly for quick shipment worldwide. Variations of type N and BNC cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal type N to BNC RF cable assembly as per your requirements. |
| 0 | ||
| PE3740/HS-72 | Pasternack Enterprises | Key Specifications, Connector 1 Series: SMC, Connector 1 Gender: Plug, Connector 1 Polarity: Standard, Connector Angle 1: Right Angle, Connector 1 Impedance: 50 Ohm, Connector 2 Series: SMA, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Right Angle, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: RG316/U, RF Cable Type: RG316, RF Cable Impedance: 50 Ohm, Length, Max: 72 inches. SMC Plug Right Angle to SMA Male Right Angle Cable 72 Inch Length Using RG316 Coax with HeatShrink., Radio frequency assembly SMC plug right angle to SMA male right angle cable 72 inch length using RG316 coax with heatshrink from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. The SMC plug right angle to SMA male right angle cable 72 inch length using RG316 coax with heatshrink, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom SMC to SMA cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with right angle SMC cable connection on one end and right angle SMA cable connection on the other. Our right angle SMC to right angle SMA cable assemblies have a plug gender on end 1 and male on end 2. PE3740/HS-72 can also be known as a right angle SMC male to right angle SMA plug cable assembly and will be shipped same-day as it is purchased. SMC male to SMA plug cable assembly PE3740/HS-72 is built with RG316 which is a flexible coax type. The Pasternack flexible SMC cable assembly is manufactured with right angle SMC to right angle SMA cable connectors, has a 50 Ohm impedance and is single shielded. RF specs on this 3 GHz maximum frequency SMC right angle plug to SMA right angle male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3740/HS-72 can also be used in the other direction and will be right angle SMA male to right angle SMC plug cable assembly if the opposite connectivity is required. SMC right angle male to SMA right angle plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality SMC to SMA cable assembly for quick shipment worldwide. Variations of SMC cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this SMC plug right angle to SMA male right angle cable 72 inch length using RG316 coax with heatshrink. |
| 0 | ||
 TE Connectivity | EVS722-51 | TE Connectivity | EVS722-51 Liquid Level Sensor Entry Style: Top Bottom Fluid Type: Water Contact Form: A+B Port Fitting: M16 External M16 Internal Case Material: Brass and Glass Filled Polypropylene Top Water A+B | Extended Vertical Liquid Level Switch | Part Number: EVS722-51 | Internal Number: 20017777-00 | Brass and Glass Filled Polypropylene | TE Connectivity RoHS : Compliant |
| 43 | |
 Venkel Ltd. | WRFI0603-S-72NJT | VENKEL LTD | Wirewound RF Inductor;0603;72nH;�5% RoHS : Not Compliant | 4,000 | ||
| WRFI0805-S-72NJT | VENKEL LTD | Wirewound RF Inductor;0805;72nH;�5% RoHS : Not Compliant | 4,000 | |||
| WRFI0603-S-72NKT | VENKEL LTD | Wirewound RF Inductor;0603;72nH;�10% RoHS : Not Compliant | 0 | |||
| WRFI0805-S-72NKT | VENKEL LTD | Wirewound RF Inductor;0805;72nH;�10% RoHS : Not Compliant | 0 | |||
| WRFI0603-S-72NGT | VENKEL LTD | Wirewound RF Inductor;0603;72nH;�2% RoHS : Not Compliant | 0 | |||
| WRFI0805-S-72NGT | VENKEL LTD | Wirewound RF Inductor;0805;72nH;�2% RoHS : Not Compliant | 0 | |||
 Vyrian | TPS72215DBVT | Texas Instruments | Fixed Positive LDO Regulator, 1.5V, CMOS, PDSO5 RoHS : Compliant | 9,212 | ||
ADS7223SRHBT | Texas Instruments | ADC, Successive Approximation, 12-Bit, 1 Func, 4 Channel, Serial Access, PQCC32 RoHS : Compliant | 9,010 | |||
| ADS7253C6RTET | Texas Instruments | 8,311 | ||||
TPS7250Y | Texas Instruments | Fixed Positive LDO Regulator, 5V, 0.312V Dropout, PMOS | 8,209 | |||
| TPS72709DSER | Texas Instruments | Fixed Positive LDO Regulator | 7,916 | |||
| 2S721 | Texas Instruments | Transistor | 7,682 | |||
TPS7233QDRG4 | Texas Instruments | Fixed Positive LDO Regulator, 3.3V, 0.61V Dropout, PMOS, PDSO8 RoHS : Compliant | 7,012 | |||
NLAS7222AMUR2G | onsemi | DPDT, 1 Func, 2 Channel, CMOS RoHS : Compliant | 6,427 | |||
TPS7201QPWG4 | Texas Instruments | Adjustable Positive LDO Regulator, 1.2V Min, 9.75V Max, 1.1V Dropout, PMOS, PDSO8 RoHS : Compliant | 5,982 | |||
ADS7280IPW | Texas Instruments | ADC, Successive Approximation, 14-Bit, 1 Func, 2 Channel, Serial Access, CMOS, PDSO16 RoHS : Compliant | 5,446 | |||
ADS7279IRSATG4 | Texas Instruments | ADC, Successive Approximation, 14-Bit, 1 Func, 1 Channel, Serial Access, CMOS, PQCC16 RoHS : Compliant | 5,176 | |||
TPS72625DCQRG4 | Texas Instruments | Fixed Positive LDO Regulator, 2.5V, 0.28V Dropout, CMOS, PDSO6 RoHS : Compliant | 4,850 | |||
| 6ES7291-8BA20-0XA0 | Siemens | Batteries/Accessories | 807 | |||
| ACS72981ELRATR-200U5 | Allegro MicroSystems | Current Sensor, BICMOS, 7 Pin, Plastic/epoxy | 729 | |||
| PS7206-1A | Renesas Electronics Corporation | FET Output Optocoupler, 1-Element, 1500V Isolation | 209 |
| Does ALLDATASHEET help your business so far? [ DONATE ] |
About Alldatasheet | Advertisement | Contact us | Privacy Policy | Link to Datasheet | Link Exchange | Manufacturer List All Rights Reserved짤Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |
British ▼ 
English
Chinese
German
Japanese
Russian
Korean
Spanish
French
Italian
Portuguese
Polish
Vietnamese
Indian
Mexican
New Zealand