| Electronic Components Datasheet Search |
|
W032240JL-R Distributor |
| Distributor | Part # | Manufacturer | Description | Price | Qty. BuyNow | |
![]() DigiKey | DW-03-20-L-D-748 | JRH ELECTRONICS | CONN HDR 6POS 0.1 STACK T/H GOLD |
| 1,255 | |
| ZW-03-20-G-D-500-315 | JRH ELECTRONICS | CONN BRD STACK .100" 6POS |
| 1,255 | ||
| ZW-03-20-G-D-708-098 | JRH ELECTRONICS | CONN BRD STACK .100" 6POS |
| 1,255 | ||
| 17W03221B | Essentra Components | FLAT WASHER, .128 ID, .322 OD, . |
| 1,000 | ||
| DW-03-20-S-S-610 | JRH ELECTRONICS | CONN HDR 3POS 0.1 STACK T/H GOLD |
| 610 | ||
| ZW-03-20-T-S-783-115 | JRH ELECTRONICS | CONN BRD STACK .100" 3POS |
| 610 | ||
| HW-03-20-G-D-840-125 | JRH ELECTRONICS | CONN HDR 6POS 0.1 STACK T/H |
| 565 | ||
| HW-03-20-T-S-850-140 | JRH ELECTRONICS | CONN BRD STACK .100" 3POS |
| 546 | ||
| DW-03-20-S-S-690-LL | JRH ELECTRONICS | CONN HDR 3POS 0.1 STACK T/H GOLD |
| 329 | ||
| MI-C6W-03-28LSZH-F | PTSPEED | MINIPLUG CAT6 28AWG UTP 3 WH |
| 300 | ||
| ZW-03-20-T-S-875-120 | JRH ELECTRONICS | CONN BRD STACK .100" 3POS |
| 215 | ||
| HW-03-20-T-D-700-SM | JRH ELECTRONICS | STACKING BOARD CONNECTOR, HW SER |
| 201 | ||
| ZW-03-20-L-D-787-120 | JRH ELECTRONICS | CONN BRD STACK .100" 6POS |
| 181 | ||
| HW-03-20-L-D-787-SM | JRH ELECTRONICS | CONN BRD STACK .100" 6POS |
| 180 | ||
| MM-S6AW-03-28LSZH-F | PTSPEED | THIN C6A 28AWG UFTP LSZH 3 WH |
| 99 | ||
![]() Avnet Americas | HW-03-20-L-D-350-110-LL | Samtec Inc | Board Stackers & Spacers, Pin Header, 8.89 mm, 6 Contacts, Solder, 2 Rows, 2.54 mm, HW Series - Bulk (Alt: HW-03-20-L-D-350-110-LL) RoHS : Compliant | 6,595 | ||
| HW-03-20-G-D-840-125 | Samtec Inc | Board Stackers & Spacers, Pin Header, 21.34 mm, 6 Contacts, Solder, 2 Rows, 2.54 mm, HW Series - Bulk (Alt: HW-03-20-G-D-840-125) RoHS : Compliant |
| 0 | ||
| HW-03-20-T-S-850-140 | Samtec Inc | Board Stackers & Spacers, Pin Header, 21.59 mm, 3 Contacts, Solder, 1 Rows, 2.54 mm, HW Series - Bulk (Alt: HW-03-20-T-S-850-140) RoHS : Compliant |
| 0 | ||
| DW-03-20-S-T-788 | Samtec Inc | Board Stackers & Spacers, Pin Header, 20.02 mm, 9 Contacts, Solder, 3 Rows, 2.54 mm, DW Series - Bulk (Alt: DW-03-20-S-T-788) RoHS : Compliant |
| 0 | ||
| HW-03-20-T-D-740-SM | Samtec Inc | - Bulk (Alt: HW-03-20-T-D-740-SM) RoHS : Compliant |
| 0 | ||
| DW-03-20-T-S-905-002 | Samtec Inc | Stacking Board Connector, DW Series, 3 Contacts, Header, 2.54 mm, Through Hole, 1 Rows - Bulk (Alt: DW-03-20-T-S-905-002) RoHS : Compliant |
| 0 | ||
| M85049/144-28W03-2 | Amphenol Corporation | - Bulk (Alt: A8504914428W032) RoHS : Not Compliant |
| 0 | ||
| HW-03-20-F-D-825-SM-A | Samtec Inc | Board Stackers & Spacers, Pin Header, 20.96 mm, 6 Contacts, Solder, 2 Rows, 2.54 mm - Bulk (Alt: HW-03-20-F-D-825-SM-A) RoHS : Compliant |
| 0 | ||
| HW-03-20-L-S-875-SM | Samtec Inc | - Bulk (Alt: HW-03-20-L-S-875-SM) RoHS : Compliant | 0 | |||
| HW-03-20-T-D-470-SM | Samtec Inc | - Bulk (Alt: HW-03-20-T-D-470-SM) RoHS : Compliant | 0 | |||
| HW-03-20-T-D-988-SM-A | Samtec Inc | Board Stackers & Spacers, Pin Header, 25.1 mm, 6 Contacts, Solder, 2 Rows, 2.54 mm, HW Series - Bulk (Alt: HW-03-20-T-D-988-SM-A) RoHS : Compliant |
| 0 | ||
| HW-03-20-T-S-780-102 | Samtec Inc | - Bulk (Alt: HW-03-20-T-S-780-102) RoHS : Compliant | 0 | |||
| HW-03-20-L-S-325-SM | Samtec Inc | - Bulk (Alt: HW-03-20-L-S-325-SM) RoHS : Compliant | 0 | |||
| HW-03-20-LM-S-575-SM | Samtec Inc | - Bulk (Alt: HW-03-20-LM-S-575-SM) RoHS : Compliant | 0 | |||
| EW-03-20-G-D-495 | Samtec Inc | - Bulk (Alt: EW-03-20-G-D-495) RoHS : Compliant | 0 | |||
![]() Newark | B59110W2111W032 | TDK Corporation | ULTRASONIC SENSOR, 74.5KHZ, 60DEG; RoHS : Compliant |
| 100 | |
| EFW(03)-240X80T0800 | KEMET Corporation | NOISE SUPPRESSION SHEET, 240X80X0.3MM; RoHS : Compliant |
| 35 | ||
| SW-032-135 | Bivar Inc | FASTENERS, SCREW INSULATOR WASHER; Internal Diameter:3mm; External Diameter:5.5mm; Fastener Material:-; Thread Size - Metric:-; Product Range:-; Inner Diameter:3mm; Outer Diameter:5.5mm; Thread Size - Imperial:#4 RoHS Compliant: Yes RoHS : Compliant |
| 17 | ||
| RTW03-25R | TDK-Lambda Corporation | AC-DC CONVERTER, OPEN FRAME, 1 O/P, 82.5W, 25A, 3.3V; No. of Outputs:1 Output; Power Supply Output Type:Adjustable, Fixed; Output Voltage - Output 1:3.3V; Output Current - Output 1:25A; Output Voltage - Output 2:-; Height:82.042mm RoHS Compliant: Yes RoHS : Compliant |
| 0 | ||
| AW0320427 | Campbell | MACH CHAIN,TWL #4 Z/P 100/RL; RoHS : Not Compliant |
| 0 | ||
| RTW03-25RC | TDK-Lambda Corporation | AC-DC CONVERTER, ENCLOSED, 1 O/P, 82.5W, 25A, 3.3V; Power Supply Applications:ITE; No. of Outputs:1Outputs; Output Power Max:82.5W; Output Voltage - Output 1:3.3V; Output Current - Output 1:25A; Output Voltage - Output 2:- RoHS Compliant: Yes RoHS : Compliant |
| 0 | ||
| EFW(03)-240X240 | KEMET Corporation | NOISE SUPPRESSION SHEET, 240X240X0.3MM; RoHS : Compliant |
| 0 | ||
| MKP1W032207F00KSSD | Wima | CAP, 0.22UF, 3KV, FILM, RADIAL; RoHS : Compliant |
| 0 | ||
| EFW(03)-240X240T0800 | KEMET Corporation | NOISE SUPPRESSION SHEET, 240X240X0.3MM; Gasket Material:Polymer Film; Product Length:240mm; Product Width:240mm; Product Depth:0.3mm; Product Range:Flex Suppressor® EFW Series; Depth:0.3mm; Length:240mm; Width:240mm RoHS Compliant: Yes RoHS : Compliant |
| 0 | ||
![]() RS | SW-032-135 | Bivar Inc | SHOULDER WASHER, HI-TEMP,#4 SCREW,.130OD/.032 H BUSHING, BLK POLYPHENYLENE SULFIDE RoHS : Compliant |
| 796 | |
| RTW03-25RC (HWS100A-3/A) | TDK-Lambda Corporation | POWER SUPPLY, AC-DC, 115230VAC, OUTPUT 3.3V 25A,82.5W |
| 1 | ||
| FW0324A | Essentra Components | FLAT WASHER 0.406IN ID X 0.750IN OD:NATURAL NYLON |
| 0 | ||
| FW0324B | Essentra Components | FLAT WASHER: BLACK NYLON |
| 0 | ||
| FW0320B | Essentra Components | FLAT WASHER:BLACK NYLON |
| 0 | ||
| RLW-032215 | MTE Corp | MTE RLW LINE/LOAD REACTOR 208-690V;50-60HZ 322A NEMA1 0.13MH |
| 0 | ||
| RLW-032207 | MTE Corp | MTE RLW LINE/LOAD REACTOR 208-690V;50-60HZ 322A OPEN 0.225MH |
| 0 | ||
| RLW-032213 | MTE Corp | MTE RLW LINE/LOAD REACTOR 208-690V;50-60HZ 322A NEMA1 0.07MH |
| 0 | ||
| XTAE025C01W032 | Eaton Cutler-Hammer | DOL STARTER,3 POLE, IEC,24-32A FLA,42VAC 50HZ,48VAC 60HZ COIL,1NC AUX CONTACT |
| 0 | ||
| GTND-W-032-075 | Fabco-Air | CYLINDER, AIR, COMPACT, MAGNET, GUIDED TOOLPLATE, 32MM BORE, NPT, GLOBAL SERIES |
| 0 | ||
| GTND-W-032-125 | Fabco-Air | CYLINDER, AIR, COMPACT, MAGNET, GUIDED TOOLPLATE, 32MM BORE, NPT, GLOBAL SERIES |
| 0 | ||
| IV30BWW0327NXEQA | APEM Inc | PUSHBUTTON SWITCH, 10 MA, 5V DC, WHITE LED, 600 MM WIRE LEADS, IV SERIES |
| 0 | ||
| YB15RKW03-2CF02-JB | NKK Switches | SWITCH, P/B, SPDT, ON-(ON),RECT,2V RED/GRN LED, CLEAR/WHT CAP,3A,125VAC, STRAIGHT PC RoHS : Compliant |
| 0 | ||
| S85049/88-15W03-230S | SOURIAU-SUNBANK | ALUMINUM & BRONZE BACKSHELLS |
| 0 | ||
| V451SW03-2ZA00-0 (RCV-00012813 | V451SW03-2ZA00-0 | V451SW032ZA000) | Carling Technologies | ROCKER SWITCH;SEALED;CONTURA;V-SERIES |
| 0 | ||
![]() Microchip Technology Inc | PIC16CR57C/W032 | Microchip Technology Inc | No description available, Projected EOL: - Contact for Pricing | 0 | ||
![]() Bisco Industries | PF11MW-032-12 | PennEngineering (PEM) | 2,023 | |||
| PF11MW-032-11 | PennEngineering (PEM) | 749 | ||||
| SW-032-135 | Bivar Inc | RoHS : Compliant | 668 | |||
| 159-W03-2P | NUTS | 44 | ||||
| PF11MW-032-11BL | PennEngineering (PEM) | 13 | ||||
![]() Sager | HW-03-20-G-D-840-125 | Samtec Inc | Board to Board & Mezzanine Connectors High Temperature Flexible Board Stacking Header, 0.100 Pitch RoHS : Compliant |
| 856 | |
| HW-03-20-T-S-850-140 | Samtec Inc | Board to Board & Mezzanine Connectors High Temperature Flexible Board Stacking Header, 0.100 Pitch RoHS : Compliant |
| 827 | ||
| DW-03-20-S-T-788 | Samtec Inc | Board to Board & Mezzanine Connectors Flexible Board Stacking Header with Fixed Tail Length, 0.100 Pitch RoHS : Compliant |
| 728 | ||
| DW-03-20-T-S-905-002 | Samtec Inc | Board to Board & Mezzanine Connectors Flexible Board Stacking Header with Fixed Tail Length, 0.100 Pitch RoHS : Compliant |
| 295 | ||
| HW-03-20-F-D-825-SM-A | Samtec Inc | Board to Board & Mezzanine Connectors High Temperature Flexible Board Stacking Header, 0.100 Pitch RoHS : Compliant |
| 0 | ||
| HW-03-20-L-S-875-SM | Samtec Inc | Board to Board & Mezzanine Connectors RoHS : Compliant | 0 | |||
| HW-03-20-T-D-470-SM | Samtec Inc | Board to Board & Mezzanine Connectors RoHS : Compliant | 0 | |||
| HW-03-20-T-D-988-SM-A | Samtec Inc | Board to Board & Mezzanine Connectors High Temperature Flexible Board Stacking Header, 0.100 Pitch RoHS : Compliant |
| 0 | ||
| HW-03-20-T-S-756-SM-A | Samtec Inc | Board to Board & Mezzanine Connectors RoHS : Compliant | 0 | |||
| HW-03-20-T-S-780-102 | Samtec Inc | Board to Board & Mezzanine Connectors RoHS : Compliant | 0 | |||
| DW-03-20-F-S-865 | Samtec Inc | Board to Board & Mezzanine Connectors RoHS : Compliant | 0 | |||
| DW-03-20-T-S-788 | Samtec Inc | Board to Board & Mezzanine Connectors RoHS : Compliant | 0 | |||
| DW-03-20-F-S-810 | Samtec Inc | Board to Board & Mezzanine Connectors RoHS : Compliant | 0 | |||
| DW-03-20-L-S-700 | Samtec Inc | Board to Board & Mezzanine Connectors RoHS : Compliant | 0 | |||
| IV30BWW0327NXEQA | IDEC Corporation | PUSHBUTTON SWITCH IV |
| 0 | ||
![]() TME | D2AW0329D | OMRON Corporation | Microswitch SNAP ACTION |
| 311 | |
| D2AW0325A | OMRON Corporation | Microswitch SNAP ACTION |
| 264 | ||
| D2AW0328F | OMRON Corporation | Microswitch SNAP ACTION |
| 80 | ||
| LU202W032GG4 | KIOXIA | Pendrive; USB 2.0; 32GB; HAYABUSA; white; USB A |
| 40 | ||
| LU301W032GG4 | KIOXIA | Pendrive; USB 3.2; 32GB; HAYABUSA; white; USB A |
| 33 | ||
| W032015 | WORKPRO | Clamp; universal; aluminium; max.51mm |
| 20 | ||
| W8W032768DL5ZDN | WTL | Generator: quartz; 32.768kHz; 12.5pF; ±20ppm; 1.6x1.2x0.35mm |
| 0 | ||
| EFW(03)-240X240 | KEMET Corporation | Mat EMI/EMC: shielding; 240x240x0.3mm; Permeability: 230; EFW |
| 0 | ||
| W1W032768DL5ZDN | WTL | Generator: quartz; 32.768kHz; 12.5pF; ±20ppm; ±3ppm/year; -40÷85°C |
| 0 | ||
| W1W032768DL5ZDT | WTL | Generator: quartz; 32.768kHz; 12.5pF; ±20ppm; ±3ppm/year; -40÷85°C |
| 0 | ||
| W1W032768D06ZDT | WTL | Generator: quartz; 32.768kHz; 6pF; ±20ppm; ±3ppm/year; 2x1.2x0.6mm |
| 0 | ||
| MKP1W032207F00KSSD | Wima | Capacitor: polypropylene; 220nF; 3kVDC; 700VAC; 41.5x19x32mm; THT RoHS : Compliant |
| 0 | ||
| EFW(03)-240X80T0800 | KEMET Corporation | Mat EMI/EMC: shielding; 240x80x0.3mm; Permeability: 230; EFW |
| 0 | ||
| EFW(03)-240X240T0800 | KEMET Corporation | Mat EMI/EMC: shielding; 240x240x0.3mm; Permeability: 230; EFW |
| 0 | ||
| SNFPW032207HD2KSSD | Wima | Capacitor: polypropylene; 220nF; 3kVDC; 24x45.5x41.5mm; ±10% RoHS : Compliant |
| 0 | ||
![]() ComSIT USA | M58LW032C90N6E![]() | STMicroelectronics | 32 MBIT (2MBIT X 16, UNIFORM BLOCK, BURST) 3V SUPPLY FLASH MEMORY Flash, 2MX16, 90ns, PDSO56 RoHS : Compliant | 429 | ||
![]() Interstate Connecting Components | M85049/144-28W03-2 | Amphenol PCD | M85049144-28W03-2 | 0 | ||
| M85049/144S24W03-2 | Amphenol PCD | M85049144S24W03-2 | 0 | |||
| M85049/144S40W03-2 | Amphenol PCD | M85049144S40W03-2 | 0 | |||
| M85049/144-40W03-2 | Amphenol PCD | M85049144-40W03-2 | 0 | |||
| M85049/144S48W03-2 | Amphenol PCD | M85049144S48W03-2 | 0 | |||
| M85049/144-48W03-2 | Amphenol PCD | M85049144-48W03-2 | 0 | |||
| M85049/144-03W03-2 | Amphenol PCD | M85049144-03W03-2 | 0 | |||
| M85049/144-32W03-2 | Amphenol PCD | M85049144-32W03-2 | 0 | |||
| M85049/144-16W03-2 | Amphenol PCD | M85049144-16W03-2 | 0 | |||
| M85049/144S32W03-2 | Amphenol PCD | M85049144S32W03-2 | 0 | |||
| M85049/144-10W03-2 | Amphenol PCD | M85049144-10W03-2 | 0 | |||
| M85049/144S18W03-2 | Amphenol PCD | M85049144S18W03-2 | 0 | |||
| M85049/144S14W03-2 | Amphenol PCD | M85049144S14W03-2 | 0 | |||
| M85049/144-18W03-2 | Amphenol PCD | M85049144-18W03-2 | 0 | |||
| M85049/144-12W03-2 | Amphenol PCD | M85049144-12W03-2 | 0 | |||
![]() NexGen Digital | MKP1W032207F00KSSD | Wima | RoHS : Compliant | 13,030 | ||
![]() PEI Genesis | M85049/144-28W03-2 | Amphenol PCD |
| 0 | ||
| M85049/144S24W03-2 | Amphenol PCD |
| 0 | |||
| M85049/144S40W03-2 | Amphenol PCD |
| 0 | |||
| M85049/144-40W03-2 | Amphenol PCD |
| 0 | |||
| M85049/144S48W03-2 | Amphenol PCD |
| 0 | |||
| S85049/88-15W03-230S | SOURIAU-SUNBANK |
| 0 | |||
| S85049/1813W03-230S | SOURIAU-SUNBANK |
| 0 | |||
| R58HA04B31W032A | SOURIAU-SUNBANK |
| 0 | |||
| R58HB04B31W032A | SOURIAU-SUNBANK |
| 0 | |||
| M85049/144-48W03-2 | Amphenol PCD |
| 0 | |||
| M85049/144-03W03-2 | Amphenol PCD |
| 0 | |||
| M85049/144-32W03-2 | Amphenol PCD |
| 0 | |||
| M85049/144-16W03-2 | Amphenol PCD |
| 0 | |||
| M85049/144S32W03-2 | Amphenol PCD |
| 0 | |||
| S85049/1815W03-230S | SOURIAU-SUNBANK |
| 0 | |||
![]() Powell Electronics | ZW-03-20-G-D-500-315 | Samtec Inc | Flexible Board Stacking Header, 0.100" P RoHS : Compliant |
| 1,255 | |
| ZW-03-20-G-D-708-098 | Samtec Inc | Flexible Board Stacking Header, 0.100" P RoHS : Compliant |
| 1,255 | ||
| EW-03-20-G-D-510 | Samtec Inc | Flexible Board Stacking Header with Fixe RoHS : Compliant |
| 1,255 | ||
| EW-03-20-L-D-700 | Samtec Inc | Flexible Board Stacking Header with Fixe RoHS : Compliant |
| 1,255 | ||
| HW-03-20-G-D-840-125 | Samtec Inc | High Temperature Flexible Board Stacking RoHS : Compliant |
| 565 | ||
| HW-03-20-T-S-850-140 | Samtec Inc | High Temperature Flexible Board Stacking RoHS : Compliant |
| 546 | ||
| DW-03-20-S-T-788 | Samtec Inc | Flexible Board Stacking Header with Fixe RoHS : Compliant |
| 480 | ||
| HW-03-20-L-S-800-SM | Samtec Inc | High Temperature Flexible Board Stacking RoHS : Compliant |
| 477 | ||
| HW-03-20-L-S-330-SM | Samtec Inc | Cable Assembly, Wire-to-Board, High-Prof RoHS : Compliant |
| 353 | ||
| ZW-03-20-L-S-690-165 | Samtec Inc | Flexible Board Stacking Header, 0.100" P RoHS : Compliant |
| 224 | ||
| ZW-03-20-S-S-743-260-002 | Samtec Inc | Flexible Board Stacking Header, 0.100" P RoHS : Compliant |
| 202 | ||
| HW-03-20-T-D-740-SM | Samtec Inc | High Temperature Flexible Board Stacking RoHS : Compliant |
| 201 | ||
| HW-03-20-T-D-700-SM | Samtec Inc | High Temperature Flexible Board Stacking RoHS : Compliant |
| 201 | ||
| DW-03-20-T-S-905-002 | Samtec Inc | Flexible Board Stacking Header with Fixe RoHS : Compliant |
| 195 | ||
| HW-03-20-T-D-250-SM | Samtec Inc | High Temperature PCB Header Strips, 0.10 RoHS : Compliant |
| 193 | ||
![]() Richardson RFPD | DCMFW03-24S05 | Wall Industries Inc | 3 Watts DC/DCConverter Single Output RoHS : Compliant | 0 | ||
| DCMPPW03-24D15B | Wall Industries Inc | 3 Watt Medical DC/DC PowerConverter Module RoHS : Compliant | 0 | |||
| DCMFW03-24D15 | Wall Industries Inc | DCTODC CONVERTR MOD RoHS : Compliant | 0 | |||
| DCMPPW03-24S15A | Wall Industries Inc | 3 Watt Medical DC/DC PowerConverter Module RoHS : Compliant | 0 | |||
| DCMOPW03-24D12B | Wall Industries Inc | 3 Watt Medical DC/DC PowerConverter Module RoHS : Compliant | 0 | |||
| DCMPPW03-24D05A | Wall Industries Inc | 3 Watt Medical DC/DC PowerConverter Module RoHS : Compliant | 0 | |||
| DCMFW03-24S12 | Wall Industries Inc | 3 Watts DC/DCConverter Single Output RoHS : Unknown | 0 | |||
| DCMPPW03-24S33A | Wall Industries Inc | DCTODC CONVERTR MOD RoHS : Compliant | 0 | |||
| DCSDW03-24S12 | Wall Industries Inc | Up to 3 Watts DC/DC Converter Single Output RoHS : Compliant | 0 | |||
| DCSDW03-24S24S | Wall Industries Inc | DC/DC Converter RoHS : Compliant | 0 | |||
| DCSDW03-24S15 | Wall Industries Inc | Up to 3 Watts DC/DCConverter Single Output RoHS : Compliant | 0 | |||
| DCMOPW03-24S05A | Wall Industries Inc | 3 Watt Medical DC/DC PowerConverter Module RoHS : Compliant | 0 | |||
| DCMPPW03-24S05B | Wall Industries Inc | 3 Watt Medical DC/DC PowerConverter Module RoHS : Compliant | 0 | |||
| DCSDW03-24S33S | Wall Industries Inc | DC/DC Converter RoHS : Compliant | 0 | |||
| DCMPPW03-24S15B | Wall Industries Inc | 3 Watt Medical DC/DC PowerConverter Module RoHS : Compliant | 0 | |||
![]() Chip 1 Exchange | M58LW032C90N1 | INSTOCK | 998 | |||
| M58LW032C90N6 | INSTOCK | 495 | ||||
M58LW032C90ZA6E![]() | STMicroelectronics | INSTOCK RoHS : Compliant | 190 | |||
![]() Avnet Abacus | EFW(03)-240X240 | KEMET Corporation | Noise Suppression Sheet for Mobile Phone Display Digital Still Camera Digital Video Camera (Alt: EFW(03)-240X240) RoHS : Compliant | 0 | ||
| EW-03-20-G-D-510 | Samtec Inc | (Alt: EW-03-20-G-D-510) RoHS : Compliant | 0 | |||
| DW-03-20-G-D-780 | Samtec Inc | Board Stackers Spacers Pin Header 1981 mm 6 Contacts Solder 2 Rows 254 mm DW Series (Alt: DW-03-20-G-D-780) RoHS : Compliant | 0 | |||
| DW-03-20-L-D-600 | Samtec Inc | Stacking Board Connector DW Series 6 Contacts Header 254 mm Through Hole 2 Rows (Alt: DW-03-20-L-D-600) RoHS : Compliant | 0 | |||
| EW-03-20-T-D-650 | Samtec Inc | Stacking Board Connector EW Series 6 Contacts Header 254 mm Through Hole 2 Rows (Alt: EW-03-20-T-D-650) RoHS : Compliant | 0 | |||
| DW-03-20-G-S-748 | Samtec Inc | Stacking Board Connector DW Series 3 Contacts Header 254 mm Through Hole 1 Rows (Alt: DW-03-20-G-S-748) RoHS : Compliant | 0 | |||
| DW-03-20-F-D-787 | Samtec Inc | (Alt: DW-03-20-F-D-787) RoHS : Compliant | 0 | |||
| HW-03-20-L-D-787-SM | Samtec Inc | Board Stackers Spacers Pin Header 1999 mm 6 Contacts Solder 2 Rows 254 mm HW Series (Alt: HW-03-20-L-D-787-SM) RoHS : Compliant | 0 | |||
| HW-03-20-G-D-785-SM | Samtec Inc | Stacking Board Connector HW Series 6 Contacts Header 254 mm Surface Mount 2 Rows (Alt: HW-03-20-G-D-785-SM) RoHS : Compliant | 0 | |||
| HW-03-20-G-D-840-125 | Samtec Inc | Board Stackers Spacers Pin Header 2134 mm 6 Contacts Solder 2 Rows 254 mm HW Series (Alt: HW-03-20-G-D-840-125) RoHS : Compliant | 0 | |||
| ZW-03-20-L-D-554-288 | Samtec Inc | (Alt: ZW-03-20-L-D-554-288) RoHS : Compliant | 0 | |||
| HW-03-20-G-D-536-297 | Samtec Inc | Stacking Board Connector HW Series 6 Contacts Header 254 mm Through Hole 2 Rows (Alt: HW-03-20-G-D-536-297) RoHS : Compliant | 0 | |||
| ZW-03-20-F-S-790-105 | Samtec Inc | (Alt: ZW-03-20-F-S-790-105) RoHS : Compliant | 0 | |||
| ZW-03-20-T-D-820-155 | Samtec Inc | (Alt: ZW-03-20-T-D-820-155) RoHS : Compliant | 0 | |||
| HW-03-20-F-D-835-SM-A | Samtec Inc | Board Stackers Spacers Pin Header 2121 mm 6 Contacts Solder 2 Rows 254 mm HW Series (Alt: HW-03-20-F-D-835-SM-A) RoHS : Compliant | 0 | |||
![]() Avnet Asia | B59110W2111W032 | TDK Corporation | Ultrasonic Sensor, 45? Beam Angle, 74.5 kHz, -40 ?C to 85 ?C, 2 m, W2110W111 Series (Alt: B59110W2111W032) RoHS : Compliant | 0 | ||
![]() Avnet Silica | K32W032S1M2VPJAT | NXP Semiconductors | ARM MCU 32bit ARM CortexM4 ARM CortexM0 72 MHz 125 MB 384 KB 176 Pins VFBGA (Alt: K32W032S1M2VPJAT) RoHS : Compliant | 0 | ||
| K32W032S1M2CAVAR | NXP Semiconductors | ARM MCU 32bit ARM CortexM4 ARM CortexM0 72 MHz 125 MB 384 KB 191 Pins WLCSP (Alt: K32W032S1M2CAVAR) RoHS : Compliant | 0 | |||
![]() DB Roberts | PF11MW-032-12 | PennEngineering (PEM) | Compensates for mating hole misalignment.Installs into any panel hardness. |
| 4,884 | |
| PF11MW-032-11BL | PennEngineering (PEM) | Compensates for mating hole misalignment.Installs into any panel hardness. |
| 809 | ||
| PF11MW-032-11 | PennEngineering (PEM) | Compensates for mating hole misalignment.Installs into any panel hardness. |
| 571 | ||
| 17W03221B | Essentra Components | FLAT WASHER, .128 ID, .322 OD, | 0 | |||
| 17W03280B | Essentra Components | FLAT WASHER, .150 ID, .329 OD, | 0 | |||
| 17W03221 | Essentra Components | 0 | ||||
| 17W03223 | Essentra Components | FLAT WASHER, .189 ID, .330 OD, | 0 | |||
| PF11PMW-032-2B | PennEngineering (PEM) | 19-PANEL FASTENERS | 0 | |||
| PF12MW-032-11 | PennEngineering (PEM) | Compensates for mating hole misalignment.Installs into any panel hardness. | 0 | |||
| PF11PMW-032-0B | PennEngineering (PEM) | 19-PANEL FASTENERS | 0 | |||
| 17W03223B | Essentra Components | FLAT WASHER, .189 ID, .330 OD, | 0 | |||
| PF11PMW-032-1B | PennEngineering (PEM) | 19-PANEL FASTENERS | 0 | |||
| 17W03281 | Essentra Components | FLAT WASHER, .280 ID, .335 OD, | 0 | |||
| 17W03280 | Essentra Components | FLAT WASHER, .150 ID, .329 OD, | 0 | |||
| 17W03281B | Essentra Components | FLAT WASHER, .280 ID, .335 OD, | 0 | |||
![]() Flip Electronics | K32W032S1M2VPJAT | NXP Semiconductors | Stock RoHS : Compliant | 32,201 | ||
![]() Master Electronics | HW-03-20-F-D-300-SM-A | Samtec Inc | RoHS : Compliant |
| 0 | |
| HW-03-20-F-D-685-SM | Samtec Inc | RoHS : Compliant |
| 0 | ||
| HW-03-20-F-D-810-SM | Samtec Inc | RoHS : Compliant |
| 0 | ||
| HW-03-20-F-D-825-SM-A | Samtec Inc | HIGH TEMPERATURE FLEXIBLE RoHS : Compliant |
| 0 | ||
| HW-03-20-F-D-960-SM-LC | Samtec Inc | RoHS : Compliant |
| 0 | ||
| HW-03-20-F-S-710-SM | Samtec Inc | RoHS : Compliant |
| 0 | ||
| HW-03-20-G-D-815-SM | Samtec Inc | RoHS : Compliant |
| 0 | ||
| HW-03-20-G-D-840-125 | Samtec Inc | .100 Flex Stack High-Temp Flexible Board Stacker Through-hole RoHS : Compliant |
| 0 | ||
| HW-03-20-G-D-860-SM | Samtec Inc | RoHS : Compliant |
| 0 | ||
| HW-03-20-L-D-775-SM | Samtec Inc | RoHS : Compliant |
| 0 | ||
| HW-03-20-L-D-900-SM | Samtec Inc | RoHS : Compliant |
| 0 | ||
| HW-03-20-L-S-875-SM | Samtec Inc | .100 Flex Stack High-Temp Flexible Board Stacker Surface Mount RoHS : Compliant |
| 0 | ||
| HW-03-20-T-D-470-SM | Samtec Inc | .100 Flex Stack High-Temp Flexible Board Stacker Surface Mount RoHS : Compliant |
| 0 | ||
| HW-03-20-T-D-988-SM-A | Samtec Inc | .100 Flex Stack High-Temp Flexible Board Stacker Surface Mount RoHS : Compliant |
| 0 | ||
| HW-03-20-T-S-756-SM-A | Samtec Inc | Conn Board Stacker HDR 3 POS 19.2mm Stack Height 2.54mm Solder ST SMD RoHS : Compliant |
| 0 | ||
![]() Neutron USA | ASW0323-YT100-Y208 | IDEC Corporation | Industrial Panel Mount Indicators / Switch Indicators 22MM SEL.SW |
| 4 | |
| RTW0325RC | TDK-Lambda Corporation | Switching Power Supplies 82.5W 3.3V 25A |
| 0 | ||
| B59110W2111W032 | TDK Corporation | Distance Sensor Modules Ultrasonic sensor module USSM1.0 Plus FM |
| 0 | ||
![]() Pasternack Enterprises US | PE3W03293/HS-60 | Pasternack Enterprises | Key Specifications, Connector 1 Series: N, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: SMA, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Tri-Metal, RF Cable Part Number: RG142B/U, RF Cable Type: RG142, RF Cable Impedance: 50 Ohm, Length, Max: 60 inches. N Male to SMA Male Cable 60 Inch Length Using RG142 Coax with HeatShrink., Radio frequency assembly N male to SMA male cable 60 inch length using RG142 coax with heatshrink from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, general use, etc. The N male to SMA male cable 60 inch length using RG142 coax with heatshrink, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom type N to SMA cable assembly orders will ship the same business day as well. Pasternack RF coax cable assembly is built with a type N cable connection on one end and a SMA cable connection on the other. Our type N to SMA cable assembly has a male gender on end 1 and a male on end 2. PE3W03293/HS-60 can also be known as a type N plug to SMA plug cable assembly and will be shipped the same day as it is purchased. This flexible RF cable assembly with a 0.5-inch diameter has copper clad steel as the cable's inner conducting material and PTFE dielectric type. This cable assembly employs durable and flexible materials, and with a 1.97-inch bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. Our PE3W03293/HS-60 RF cable has a FEP jacket of 0.195-inch diameter. This radio frequency cable assembly can withstand temperatures ranging from -55 to 165 degrees C. The flexible RF cable has a between series connection. This cable assembly has a typical propagation velocity of 70% and a minimum RF shielding of 70 dB. Our type N male to SMA male cable has a maximum VSWR of 1.4:1. Type N plug to SMA plug cable assembly PE3W03293/HS-60 is built with RG142 which is a flexible coax type. The Pasternack flexible type N cable assembly is manufactured with type N to SMA cable connectors, has a 50 Ohm impedance, and is double shielded. Both the connectors have a crimp/solder attachment method and a brass body. Additional dimensions, specifications and CAD drawings for this RF cable are available on our downloadable PDF datasheet. PE3W03293/HS-60 can also be used in the other direction and will be a SMA male to type N male cable assembly if the opposite connectivity is required. Type N plug to SMA plug cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality type N to SMA cable assembly for quick shipment worldwide. Variations of type N and SMA cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal type N to SMA RF cable assembly as per your requirements. |
| 2,647 | |
| PE3W03214-9 | Pasternack Enterprises | Key Specifications, Connector 1 Series: 10-32, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: 10-32, Connector 2 Gender: Female, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: RG178B/U, RF Cable Type: RG178, RF Cable Impedance: 50 Ohm, Length, Max: 9 inches. 10-32 Male to 10-32 Female Cable 9 Inch Length Using RG178 Coax., Radio frequency assembly 10-32 male to 10-32 female cable 9 inch length using RG178 coax from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, general use, etc. The 10-32 male to 10-32 female cable 9 inch length using RG178 coax, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom 10-32 to 10-32 cable assembly orders will ship the same business day as well. Pasternack RF coax cable assembly is built with a 10-32 cable connection on one end and a 10-32 cable connection on the other. Our 10-32 to 10-32 cable assembly has a male gender on end 1 and a female on end 2. PE3W03214-9 can also be known as a 10-32 plug to 10-32 jack cable assembly and will be shipped the same day as it is purchased. This flexible RF cable assembly with a 0.5-inch diameter has copper clad steel as the cable's inner conducting material and PTFE dielectric type. This cable assembly employs durable and flexible materials, and with a 0.4-inch bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. Our PE3W03214-9 RF cable has a FEP jacket of 0.072-inch diameter. The flexible RF cable has an in-series connection. 10-32 plug to 10-32 jack cable assembly PE3W03214-9 is built with RG178 which is a flexible coax type. The Pasternack flexible 10-32 cable assembly is manufactured with 10-32 to 10-32 cable connectors, has a 50 Ohm impedance, and is single shielded. Both the connectors have a crimp/solder attachment method and a brass body with nickel plating. Additional dimensions, specifications and CAD drawings for this RF cable are available on our downloadable PDF datasheet. PE3W03214-9 can also be used in the other direction and will be a 10-32 female to 10-32 male cable assembly if the opposite connectivity is required. 10-32 plug to 10-32 jack cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality 10-32 to 10-32 cable assembly for quick shipment worldwide. Variations of 10-32 cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal 10-32 to 10-32 RF cable assembly as per your requirements. |
| 21 | ||
| PE3W03238-36 | Pasternack Enterprises | Key Specifications, Connector 1 Series: SMA, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: MCX, Connector 2 Gender: Plug, Connector 2 Polarity: Standard, Connector Angle 2: Right Angle, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Gold, RF Cable Part Number: RG316/U, RF Cable Type: RG316, RF Cable Impedance: 50 Ohm, Length, Max: 36 inches. SMA Male to MCX Plug Right Angle Cable 36 Inch Length Using RG316 Coax., Radio frequency assembly SMA male to MCX plug right angle cable 36 inch length using RG316 coax from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. The SMA male to MCX plug right angle cable 36 inch length using RG316 coax, SMA cable like our other Pasternack coaxial cable assemblies, will ship the same day and any custom SMA to MCX cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with SMA cable connection on one end and right angle MCX cable connection on the other. Our SMA to right angle MCX cable assemblies have a male gender on end 1 and plug on end 2. PE3W03238-36 can also be known as a SMA plug to right angle MCX male cable assembly and will be shipped same-day as it is purchased. SMA plug to MCX male cable assembly PE3W03238-36 is built with RG316 which is a flexible coax type. The Pasternack flexible SMA cable assembly is manufactured with SMA to right angle MCX cable connectors, has a 50 Ohm impedance and is single shielded. RF specs on this 3 GHz maximum frequency SMA male to MCX right angle plug cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3W03238-36 can also be used in the other direction and will be right angle MCX plug to SMA male cable assembly if the opposite connectivity is required. SMA plug to MCX right angle male cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality SMA to MCX cable assembly for quick shipment worldwide. Variations of SMA cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this SMA male to MCX plug right angle cable 36 inch length using RG316 coax. |
| 0 | ||
| PE3W03244LF/HS-48 | Pasternack Enterprises | Key Specifications, Connector 1 Series: N, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: 7/16 DIN, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Right Angle, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Tri-Metal, RF Cable Part Number: LMR-400, RF Cable Type: LMR-400, RF Cable Impedance: 50 Ohm, Length, Max: 48 inches. N Male to 7/16 DIN Male Right Angle Low Loss Cable 48 Inch Length Using LMR-400 Coax with HeatShrink, LF Solder., Radio frequency assembly N male to 7/16 DIN male right angle low loss cable 48 inch length using LMR-400 coax with heatshrink, LF solder from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The N male to 7/16 DIN male right angle low loss cable 48 inch length using LMR-400 coax with heatshrink, LF solder, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom type N to 7/16 DIN cable assembly orders will ship the same business day as well. Pasternack RF coax low loss cable assembly is built with a type N cable connection on one end and a right angle 7/16 DIN cable connection on the other. Our low loss type N to right angle 7/16 DIN cable assembly has a male gender on end 1 and a male on end 2. PE3W03244LF/HS-48 can also be known as a low loss type N plug to right angle 7/16 DIN plug cable assembly and will be shipped the same day as it is purchased. This flexible RF cable assembly with a 0.5-inch diameter has copper clad aluminum as the cable's inner conducting material and PE (F) dielectric type. This cable assembly employs durable and flexible materials, and with a 4-inch bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. Our PE3W03244LF/HS-48 RF cable has a PE jacket of 0.405-inch diameter. This radio frequency cable assembly can withstand temperatures ranging from -40 to 85 degrees C. The flexible RF cable has a between series connection. This cable assembly has a typical propagation velocity of 85% and a minimum RF shielding of 90 dB. Our type N male to right angle 7/16 DIN male cable has a maximum VSWR of 1.4:1. Type N plug to 7/16 DIN plug cable assembly PE3W03244LF/HS-48 is built with LMR-400 which is a flexible coax type. The Pasternack flexible type N cable assembly is manufactured with type N to right angle 7/16 DIN cable connectors, has a 50 Ohm impedance, and is double shielded. Both the connectors have a crimp/non-solder contact attachment method and a brass body with tri-metal plating. Additional dimensions, specifications and CAD drawings for this low loss RF cable are available on our downloadable PDF datasheet. PE3W03244LF/HS-48 can also be used in the other direction and will be a right angle 7/16 DIN male to type N male cable assembly if the opposite connectivity is required. Low loss type N plug to 7/16 DIN right angle plug cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality type N to 7/16 DIN cable assembly for quick shipment worldwide. Variations of type N and 7/16 DIN cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal type N to 7/16 DIN low loss RF cable assembly as per your requirements. LMR® is a registered trademark of Times Microwave Systems. |
| 0 | ||
| PE3W03245 | Pasternack Enterprises | Key Specifications, Connector Series 1: N, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: 7/16 DIN, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Right Angle, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: LMR-400, RF Cable Type: LMR-400, RF Cable Impedance: 50 Ohm. N Male to 7/16 DIN Male Right Angle Cable Using LMR-400 Coax. PE3W03245 is a N male to 7/16 DIN male right angle cable using LMR-400 coax. This Pasternack N male to 7/16 DIN male right angle cable assembly uses a 50 Ohm N for connector 1 and a 50 Ohm 7/16 DIN for connector 2. N to 7/16 DIN right angle coaxial cable assembly uses 90 degree right angle coax cable connector. Our male N to male 7/16 DIN right angle cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE3W03245 N male to 7/16 DIN male right angle cable assembly is constructed with LMR-400 coax, * LMR™ is a trademark of Times Microwave Systems. | 0 | |||
| PE3W03245/HS | Pasternack Enterprises | Key Specifications, Connector Series 1: N, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: 7/16 DIN, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Right Angle, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: LMR-400, RF Cable Type: LMR-400, RF Cable Impedance: 50 Ohm. N Male to 7/16 DIN Male Right Angle Cable Using LMR-400 Coax with HeatShrink. PE3W03245/HS is a N male to 7/16 DIN male right angle cable using LMR-400 coax. This Pasternack N male to 7/16 DIN male right angle cable assembly uses a 50 Ohm N for connector 1 and a 50 Ohm 7/16 DIN for connector 2. N to 7/16 DIN right angle coaxial cable assembly uses 90 degree right angle coax cable connector. Our male N to male 7/16 DIN right angle cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE3W03245/HS N male to 7/16 DIN male right angle cable assembly is constructed with LMR-400 coax, * LMR™ is a trademark of Times Microwave Systems. | 0 | |||
| PE3W03290/HS | Pasternack Enterprises | Key Specifications, Connector Series 1: N, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50, Connector Series 2: N, Connector Gender 2: Female, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: Bulkhead, Connector Impedance 2: 50, RF Cable Part Number: LMR-400-DB, RF Cable Type: LMR-400-DB, RF Cable Impedance: 50. N Male to N Female Bulkhead Cable Using LMR-400-DB Coax with HeatShrink. PE3W03290/HS is a N type male to N type female bulkhead cable using LMR-400-DB coax. This Pasternack type N male to type N female bulkhead cable assembly uses a 50 Ohm type N for connector 1 and a 50 Ohm N type for connector 2. Our male type N to female type N bulkhead cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE3W03290/HS type N male to type N female bulkhead cable assembly is constructed with LMR-400-DB coax and the maximum VSWR is 1.4:1, * LMR™ is a trademark of Times Microwave Systems. | 0 | |||
| PE3W03227 | Pasternack Enterprises | Key Specifications, Connector Series 1: SMA, Connector Gender 1: Male, Connector Polarity 1: Reverse Polarity, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: N, Connector Gender 2: Female, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: LMR-240-UF, RF Cable Type: LMR-240-UF, RF Cable Impedance: 50 Ohm. Reverse Polarity SMA Male to N Female Cable Using LMR-240-UF Coax. PE3W03227 is a reverse polarity SMA male to N female cable using LMR-240-UF coax. This Pasternack reverse polarity SMA male to N female cable assembly uses a 50 Ohm SMA for connector 1 and a 50 Ohm N for connector 2. Our reverse polarity male SMA to female N cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE3W03227 SMA reverse polarity male to N female cable assembly is constructed with LMR-240-UF coax, * LMR™ is a trademark of Times Microwave Systems. | 0 | |||
| PE3W03227/HS | Pasternack Enterprises | Key Specifications, Connector Series 1: SMA, Connector Gender 1: Male, Connector Polarity 1: Reverse Polarity, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: N, Connector Gender 2: Female, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: LMR-240-UF, RF Cable Type: LMR-240-UF, RF Cable Impedance: 50 Ohm. Reverse Polarity SMA Male to N Female Cable Using LMR-240-UF Coax with HeatShrink. PE3W03227/HS is a reverse polarity SMA male to N female cable using LMR-240-UF coax. This Pasternack reverse polarity SMA male to N female cable assembly uses a 50 Ohm SMA for connector 1 and a 50 Ohm N for connector 2. Our reverse polarity male SMA to female N cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE3W03227/HS SMA reverse polarity male to N female cable assembly is constructed with LMR-240-UF coax, * LMR™ is a trademark of Times Microwave Systems. | 0 | |||
| PE3W03272 | Pasternack Enterprises | Key Specifications, Connector Series 1: SSMA, Connector Gender 1: Female, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: Bulkhead, Connector Impedance 1: 50 Ohm, Connector Series 2: SMA, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: RG178B/U, RF Cable Type: RG178, RF Cable Impedance: 50 Ohm. SSMA Female Bulkhead to SMA Male Cable Using RG178 Coax. PE3W03272 is a SSMA female bulkhead to SMA male cable using RG178 coax. This Pasternack SSMA female bulkhead to SMA male cable assembly uses a 50 Ohm SSMA for connector 1 and a 50 Ohm SMA for connector 2. Our female SSMA bulkhead to male SMA cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE3W03272 SSMA female bulkhead to SMA male cable assembly is constructed with RG178 coax. | 0 | |||
| PE3W03238LF | Pasternack Enterprises | Key Specifications, Connector Series 1: SMA, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: MCX, Connector Gender 2: Plug, Connector Polarity 2: Standard, Connector Angle 2: Right Angle, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: RG316/U, RF Cable Type: RG316, RF Cable Impedance: 50 Ohm. SMA Male to MCX Plug Right Angle Cable Using RG316 Coax, LF Solder. PE3W03238LF is a SMA male to MCX plug right angle cable using RG316 coax. This Pasternack SMA male to MCX plug right angle cable assembly uses a 50 Ohm SMA for connector 1 and a 50 Ohm MCX for connector 2. SMA to MCX right angle coaxial cable assembly uses 90 degree right angle coax cable connector. Our male SMA to plug MCX right angle cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE3W03238LF SMA male to MCX plug right angle cable assembly is constructed with RG316 coax. | 0 | |||
| PE3W03245LF/HS | Pasternack Enterprises | Key Specifications, Connector Series 1: N, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: 7/16 DIN, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Right Angle, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: LMR-400, RF Cable Type: LMR-400, RF Cable Impedance: 50 Ohm. N Male to 7/16 DIN Male Right Angle Cable Using LMR-400 Coax with HeatShrink, LF Solder. PE3W03245LF/HS is a N male to 7/16 DIN male right angle cable using LMR-400 coax. This Pasternack N male to 7/16 DIN male right angle cable assembly uses a 50 Ohm N for connector 1 and a 50 Ohm 7/16 DIN for connector 2. N to 7/16 DIN right angle coaxial cable assembly uses 90 degree right angle coax cable connector. Our male N to male 7/16 DIN right angle cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE3W03245LF/HS N male to 7/16 DIN male right angle cable assembly is constructed with LMR-400 coax, * LMR™ is a trademark of Times Microwave Systems. | 0 | |||
| PE3W03278/HS | Pasternack Enterprises | Key Specifications, Connector Series 1: TNC, Connector Gender 1: Female, Connector Polarity 1: Reverse Polarity, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: TNC, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: LMR-400-DB, RF Cable Type: LMR-400-DB, RF Cable Impedance: 50 Ohm. Reverse Polarity TNC Female to TNC Male Cable Using LMR-400-DB Coax with HeatShrink. PE3W03278/HS is a reverse polarity TNC female to TNC male cable using LMR-400-DB coax. This Pasternack reverse polarity TNC female to TNC male cable assembly uses a 50 Ohm TNC for connector 1 and a 50 Ohm TNC for connector 2. Our reverse polarity female TNC to male TNC cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE3W03278/HS TNC reverse polarity female to TNC male cable assembly is constructed with LMR-400-DB coax, * LMR™ is a trademark of Times Microwave Systems. | 0 | |||
| PE3W03238LF/HS-12 | Pasternack Enterprises | Key Specifications, Connector 1 Series: SMA, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: MCX, Connector 2 Gender: Plug, Connector 2 Polarity: Standard, Connector Angle 2: Right Angle, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Gold, RF Cable Part Number: RG316/U, RF Cable Type: RG316, RF Cable Impedance: 50 Ohm, Length, Max: 12 inches. SMA Male to MCX Plug Right Angle Cable 12 Inch Length Using RG316 Coax with HeatShrink, LF Solder., Radio frequency assembly SMA male to MCX plug right angle cable 12 inch length using RG316 coax with heatshrink, LF solder from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. The SMA male to MCX plug right angle cable 12 inch length using RG316 coax with heatshrink, LF solder, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom SMA to MCX cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with SMA cable connection on one end and right angle MCX cable connection on the other. Our SMA to right angle MCX cable assemblies have a male gender on end 1 and plug on end 2. PE3W03238LF/HS-12 can also be known as a SMA plug to right angle MCX male cable assembly and will be shipped same-day as it is purchased. SMA plug to MCX male cable assembly PE3W03238LF/HS-12 is built with RG316 which is a flexible coax type. The Pasternack flexible SMA cable assembly is manufactured with SMA to right angle MCX cable connectors, has a 50 Ohm impedance and is single shielded. RF specs on this 3 GHz maximum frequency SMA male to MCX right angle plug cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3W03238LF/HS-12 can also be used in the other direction and will be right angle MCX plug to SMA male cable assembly if the opposite connectivity is required. SMA plug to MCX right angle male cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality SMA to MCX cable assembly for quick shipment worldwide. Variations of SMA cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this SMA male to MCX plug right angle cable 12 inch length using RG316 coax with heatshrink, LF solder. |
| 0 | ||
| PE3W03243 | Pasternack Enterprises | Key Specifications, Connector Series 1: SSMA, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: SSMA, Connector Gender 2: Female, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: LMR-100A-PVC, RF Cable Type: LMR-100A, RF Cable Impedance: 50 Ohm. SSMA Male to SSMA Female Cable Using LMR-100 Coax. PE3W03243 is a SSMA male to SSMA female cable using LMR-100A coax. This Pasternack SSMA male to SSMA female cable assembly uses a 50 Ohm SSMA for connector 1 and a 50 Ohm SSMA for connector 2. Our male SSMA to female SSMA cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE3W03243 SSMA male to SSMA female cable assembly is constructed with LMR-100A coax, * LMR™ is a trademark of Times Microwave Systems. | 0 | |||
![]() Vyrian | M58LW032D110ZA6![]() | STMicroelectronics | Flash, 2MX16, 110ns, PBGA64 RoHS : Compliant | 9,943 | ||
| HW-03-20-L-D-787-SM | Samtec Inc | Board Stacking Connector, 6 Contact(s), 2 Row(s), Male, Straight, Surface Mount Terminal RoHS : Compliant | 9,288 | |||
| DW-03-20-F-D-800 | Samtec Inc | Board Stacking Connector, 26 Contact(s), 2 Row(s), Male, Straight, 0.1 inch Pitch, Solder Terminal, Locking, Black Insulator RoHS : Compliant | 7,397 | |||
| N25W032A11EF640F-TR | Micron Technology Inc | 6,450 | ||||
M58LW032D110N6![]() | STMicroelectronics | Flash, 2MX16, 110ns, PDSO56 RoHS : Compliant | 4,752 | |||
| N25W032A11EF640E | Micron Technology Inc | 3,975 | ||||
![]() Win Source Electronics | FEMDRW032G-88A19 | Lexar | 32GB EMMC TLC 5.1 -40C+85C INDW |
| 3,040 | |
| FEMDMW032G-88A19 | FORESEE | 32GB eMMC 5.1 FBGA-153(11.5x13) Memory (ICs) RoHS |
| 1,520 |
| Does ALLDATASHEET help your business so far? [ DONATE ] |
About Alldatasheet | Advertisement | Contact us | Privacy Policy | Link to Datasheet | Link Exchange | Manufacturer List All Rights Reserved짤Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |