| Electronic Components Datasheet Search |
|
XRT83L30 Datasheet(PDF) 9 Page - Exar Corporation |
|
|
|||||||||||||||||||||||||||||
XRT83L30 Datasheet(HTML) 9 Page - Exar Corporation |
|
9 / 78 page ![]() áç áç áç áç XRT83L30 SINGLE-CHANNEL T1/E1/J1 LH/SH TRANSCEIVER WITH CLOCK RECOVERY AND JITTER ATTENUATOR PRELIMINARY REV. P1.3.0 6 TRANSMITTER SIGNAL NAME PIN #TYPE DESCRIPTION TTIP 8 O Transmitter Tip Output Positive differential transmit output to the line. TRING 10 O Transmitter Ring Output Negative differential transmit output to the line. TPOS TDATA 61 I Transmitter Positive Data Input In dual-rail mode, this signal is the positive-rail input data for the transmitter. Transmitter Data Input In single-rail mode, this pin is used as the NRZ input data for the transmitter. NOTE: Internally pulled “Low” with a 50k Ω resistor. TNEG CODES 62 I Transmitter Negative NRZ Data Input In dual-rail mode, this signal is the negative-rail input data for the transmitter. In single-rail mode, this pin can be left unconnected. Coding Select In Hardware mode and with single-rail mode selected, connecting this pin "Low" enables HDB3 in E1 or B8ZS in T1 encoding and decoding. Connect- ing this pin "High" selects AMI data format. NOTE: Internally pulled “Low” with a 50k Ω resistor. TCLK 60 I Transmitter Clock Input E1 rate at 2.048MHz ± 50ppm T1 rate at 1.544MHz ± 32ppm During normal operation, both in Host mode and Hardware mode, TCLK is used for sampling input data at TPOS/TDATA and TNEG/CODES while MCLK is used as the timing reference for the transmit pulse shaping circuit. TCLKE 57 I Transmit Clock Edge In Hardware mode, with this pin set to a "High", transmit input data is sam- pled at the rising edge of TCLK. With this pin tied "Low", input data are sam- pled at the falling edge of TCLK. NOTE: Internally pulled “Low” with a 50k Ω resistor. TXON 58 I Transmitter Turn On In Hardware mode, setting this pin "High" turns on the Transmit Section. In this mode, when TXON = “0”, TTIP and TRING driver outputs will be tri- stated. NOTES: 1. Internally pulled "Low" with a 50k Ω resistor. 2. In Hardware mode only, the receiver is turned on at power-up. |
|
Link URL |
| Does ALLDATASHEET help your business so far? [ DONATE ] |
About Alldatasheet | Advertisement | Contact us | Privacy Policy | Link to Datasheet | Link Exchange | Manufacturer List All Rights Reserved©Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |