3/9

Part No. : LTL2P3EX2K

BNS-OD-FC002/A4

Through Hole Lamp

LTL2P3EX2K

3. Absolute Maximum Ratings at TA=25℃

℃

℃

℃

Parameter

Maximum Rating

Unit

Power Dissipation

125

mW

Peak Forward Current

(Duty Cycle≦1/10, Pulse Width≦10ms)

120

mA

DC Forward Current

50

mA

Derating Linear From 50℃

0.87

mA/℃

Reverse Voltage

5

V

Operating Temperature Range

-40°C to + 85°C

Storage Temperature Range

-40°C to + 100°C

Lead Soldering Temperature

[2.0mm (.079") From Body]

260°C for 5 Seconds Max.

4. Electrical / Optical Characteristics at TA=25℃

℃

℃

℃

Parameter

Symbol

Min.

Typ.

Max.

Unit

Test Condition

Luminous Intensity

IV

9300

16000

mcd

IF = 20mA

Note 1,5

Viewing Angle

2θ1/2

20

23

deg

Note 2,7 (Fig.6)

Peak Emission Wavelength

λP

634

nm

Measurement

@Peak (Fig.1)

Dominant Wavelength

λd

618

630

nm

Note 4

Spectral Line Half-Width

Δλ

17

nm

Forward Voltage

VF

1.8

2.4

V

IF = 20mA

Reverse Current

IR

100

μA

VR = 5V

NOTE:

1. Luminous intensity is measured with a light sensor and filter combination that approximates the CIE eye-response curve.

2. θ1/2 is the off-axis angle at which the luminous intensity is half the axial luminous intensity.

3. Iv classification code is marked on each packing bag.

4. The dominant wavelength, λd is derived from the CIE chromaticity diagram and represents the single wavelength which defines

the color of the device.

5. Iv guarantee must be included with ±15% testing tolerance.

6. Reverse voltage (VR) condition is applied for IR test only. The device is not designed for reverse operation.

7. View angle measurement is ±2 degree tolerance.