2

The coaxial expansion board uses type MCX connectors. The power cable uses a Samtec 10-

pin connector. Figure 1 shows the power connector, and Figure 2 shows the baseband I and Q

signal inputs. Note that the I and Q signals are differential, and two cables (±) are used for the I-

input and two cables (±) are used for the Q-input. Figure 3 below shows how the power and

baseband cables are connected to the PEM003-KIT Trandmitter (TX) assembly. Figure 4 below

shows the Block Diagram logic to Figure 3. Figure 5 below illustrates the phase relationship

between the I and Q signals.

PEM004 REV 1.1

Click the following link (or enter part number in “SEARCH” on website) to obtain additional part information including price,

inventory and certifications: 60GHz Baseboard I/Q Module PEM004

60 GHz Accessories Technical Data Sheet

PEM004

60GHz Baseboard I/Q Module