https://www.phoenixcontact.com/us/products/2903275

3/7/14   Page 2 / 7

Relay Module - RIF-4-RPT-LDP-24DC/3X1 - 2903275

Technical data

Coil side

Protective circuit

Damping diode

Polarity protection diode

Contact side

Contact type

3 N/O contacts

Contact material

AgNi

Maximum switching voltage

440 V AC

250 V DC

Minimum switching voltage

10 V (At 24 mA)

Maximum inrush current

50 A (20 ms, N/O contact)

Min. switching current

10 mA (at 24 V)

Limiting continuous current

10 A (see diagram)

Interrupting rating (ohmic load) max.

240 W (at 24 V DC)

480 W (at 48 V DC)

600 W (at 60 V DC)

660 W (at 110 V DC)

183 W (at 220 V DC)

2500 VA (for 250 V AC)

4000 VA (At 440 V AC)

Switching capacity in acc. with DIN VDE 0660/IEC 60947

1 A (24 V (DC13))

1.5 A (230 V (AC 15))

Motor load according to UL 508

1/3 HP, 120 V AC (single-phase AC motor)

1/2 HP, 240 V AC (single-phase AC motor)

1/2 HP, 240 V AC (three-phase induction motor)

Connection data

Connection method

Push-in connection

Connection name

Input

Connection method

Push-in connection

Conductor cross section solid min.

0.14 mm²

Conductor cross section solid max.

1.5 mm²

Conductor cross section stranded min.

0.14 mm²

Conductor cross section stranded max.

1.5 mm²

Conductor cross section stranded, with ferrule with plastic sleeve min.

0.14 mm²

Conductor cross section stranded, with ferrule with plastic sleeve max.

1.5 mm²

Conductor cross section stranded, with ferrule without plastic sleeve min.

0.14 mm²

Conductor cross section stranded, with ferrule without plastic sleeve max. 1.5 mm²

Conductor cross section AWG/kcmil min.

26