SCM-i.MX 6Dual/6Quad Datasheet for Consumer Products, Data Sheet: Technical Data, Rev. 0, 02/2016

Freescale Semiconductor, Inc.

7

— Programmable output voltage

— Programmable current limit

— Programmable soft start

— Programmable PWM switching frequency

— Programmable OCP with fault interrupt

•

Boost regulator

— SWBST, 5.0 to 5.15 V, 0.6 A, OTG support

— Modes: PFM and Auto

— OCP fault interrupt

•

LDOs

— Six user programmable LDO

– VGEN1, 0.80 to 1.55 V, 100 mA

– VGEN2, 0.80 to 1.55 V, 250 mA

– VGEN3, 1.8 to 3.3 V, 100 mA

– VGEN4, 1.8 to 3.3 V, 350 mA

– VGEN5, 1.8 to 3.3 V, 100 mA

NOTE

VGEN5 power characteristics are modified from what is displayed in

Table 106 of the MMPF0100 datasheet. SCM-specific tolerances are ±5%,

rather than ± 3% as presented in the table.

– VGEN6, 1.8 to 3.3 V, 200 mA

— Soft start

— LDO/Switch supply

– VSNVS (1.0/1.1/1.2/1.3/1.5/1.8/3.0 V), 400uA

•

DDR memory reference voltage

— VREFDDR, 0.6 to 0.9 V, 10 mA

•

16 MHz internal master clock

•

OTP(One time programmable) memory for device configuration

— User programmable start-up sequence and timing

•

Battery backed memory including coin cell charger

•

I2C interface

•

User programmable Standby, Sleep, and Off modes