Page 4 of 4

Notes

A. Performance and quality attributes and conditions not expressly stated in this specification document are intended to be excluded and do not form a part of this specification document.

B. Electrical specifications and performance data contained in this specification document are based on Mini-Circuit’s applicable established test performance criteria and measurement instructions.

C. The parts covered by this specification document are subject to Mini-Circuits standard limited warranty and terms and conditions (collectively, “Standard Terms”); Purchasers of this part are entitled

to the rights and benefits contained therein. For a full statement of the Standard Terms and the exclusive rights and remedies thereunder, please visit Mini-Circuits’ website at www.minicircuits.com/MCLStore/terms.jsp

MMIC Power Splitter/Combiner

Additional Notes

A. Performance and quality attributes and conditions not expressly stated in this specification document are intended to be excluded and do not form a part of this specification document.

B. Electrical specifications and performance data contained in this specification document are based on Mini-Circuit’s applicable established test performance criteria and measurement instructions.

C. The parts covered by this specification document are subject to Mini-Circuits standard limited warranty and terms and conditions (collectively, “Standard Terms”); Purchasers of this part are

entitled to the rights and benefits contained therein. For a full statement of the Standard Terms and the exclusive rights and remedies thereunder, please visit Mini-Circuits’ website at

www.minicircuits.com/MCLStore/terms.jsp

EP2KA+

MSL Test Flow Chart

Performance Data

Data Table

Swept Graphs

Case Style

lead finish: Matte Tin

Tape & Reel

F74

Standard quantities available on reel

7” reels with 20, 50, 100, 200, 500, 1000 and 2000 devices

Suggested Layout for PCB Design

PL-598

Evaluation Board

MB-029

Environmental Ratings

ENV08T1

Additional Detailed Technical Information

additional information is available on our dash board. To access this information

click here

Visual

Inspection

Electrical Test

SAM Analysis

Reflow 3 cycles,

260°C

Soak

85°C/85RH

168 hours

Bake at 125°C,

24 hours

Visual

Inspection

Electrical Test

SAM Analysis

Start

Finish

ESD Rating

Human Body Model (HBM): Class 2 (Pass 2000V) in accordance with ANSI/ESD STM 5.1 - 2001