Pin Description

2

Ordering Information

Limiting Value

Symbol

Description

–IN

0.2V).

+IN

Non-Inverting Input of Amplifier. This pin has the same voltage range as –IN.

Positive Power Supply. The voltage is from 2.3V to 5.5V. Split supplies are possible as

capacitor of 0.1μF as close to the part as possible should be used between power

supply pins or between supply pins and ground.

Negative Power Supply. It is normally tied to ground. It can also be tied to a voltage

is not connected to ground, bypass it with a capacitor of 0.1μF as close to the part as

possible.

OUT

Amplifier Output.

N/C

No Connection.

Type Number

Package Name

Package Quantity

Marking Code

H

M

SC70-5

Tape and Reel, 3 000

H

M

SOT23-5

Tape and Reel, 3 000

C71

H

M

MSOP-8

Tape and Reel, 3 000

C72X

H

M

SO-8

Tape and Reel, 4 000

C72X

H

M

DFN-8L 2*2

Tape and Reel, 3 000

C72X

H

M

TSSOP-14

Tape and Reel, 3 000

C74X

H

M

SO-14

Tape and Reel, 2 500

C74X

Parameter

Absolute Maximum Rating

7.0V

Common-Mode Input Voltage

Storage Temperature Range

–65

Junction Temperature

160

℃

Lead Temperature Range (Soldering 10 sec)

260

℃

Electrostatic Discharge Voltage

HBM ±4 000V

MM ±400V

In accordance with the Absolute Maximum Rating System (IEC 60134).

NOTE 1: Stresses beyond those listed under Absolute Maximum Ratings may cause permanent damage to the device. These

are stress ratings only, which do not imply functional operation of the device at these or any other conditions beyond those

indicated under Recommended Operating Conditions. Exposure to absolute-maximum-rated conditions for extended periods

may affect device reliability.

HM721, HM722, HM724

12MHz, High Slew Rate, RRIO CMOS Operational Amplifiers