LP2 datasheet(25/27 Pages) EATON

25 / 27 page

EATON www.eaton.com

Marking Options & Accessories

Blocks to be marked on both sides require a different code for each

side. Example: “L1” on one side of the block requires “L2” on the

other side to ensure common terminal marking. Specify by adding

suffix to part number.

Special Marking

Special markings are available upon request at an additional charge

for preparation. Production charges for setup, handling and marking

are the same as for standard marking and the same quantity

discounts apply. Consult factory for price and delivery.

Standard Marking

Markings are applied directly to the sides of A0, CB0, A1, CB11, A2, LP2,

CB2, A3, LP3, CB3, A38, B38, A&B4. Standard characters are white and 1/8”

high. Factory may substitute 3/32” high characters.

All Marking Options

Single RowTerminal Blocks

For additional product information, visit www.bussmann.com

1 2 3

3 2 1

G 3

3AC

TER

MAX

PUT

134

GND

BLU

Closed Barrier Terminal Block Marking Options for (CB11, CB2

and CB3)

L1 & LT1 = Upright numerals, numbered from left to right

L2 & LT2 = Upright numerals, numbered from right to left

= Left lying numerals, numbered from left to right

= Right lying numerals, numbered from right to left

L5 & LT5 = Upside down numerals, numbered from right to left

L6 & LT6 = Upside down numerals, numbered from left to right

LP2 Datasheet(PDF) 25 Page - Eaton All Rights Reserved.