SPEC NO: DSAB1077

REV NO: V.9B

DATE: JUL/01/2016

PAGE: 2 OF 5

APPROVED: Wynec

CHECKED: Allen Liu

DRAWN: W.Q.Zhong

ERP: 1203000168

Selection Guide

Absolute Maximum Ratings at TA=25°C

Electrical / Optical Characteristics at TA=25°C

Part No.

Emitting Color (Material)

Lens Type

Viewing

Angle [1]

Min.

Typ.

2θ1/2

AP2012SF4C

Infrared (GaAlAs)

Water Clear

0.8

1.5

160

°

Po (mW/sr) [2]

@ 20mA

Parameter

P/N

Symbol

Typ.

Max.

Units

Test Conditions

Forward Voltage [1]

SF4

1.3

1.6

V

Reverse Current

SF4

10

uA

Capacitance

SF4

C

90

pF

Peak Spectral Wavelength

SF4

λP

880

nm

Spectral Bandwidth

SF4

Δλ1/2

50

nm

Parameter

Symbol

Values

Units

Power dissipation

80

mW

DC Forward Current

50

mA

Peak Forward Current [1]

1.2

A

Reverse Voltage

5

V

Operating Temperature

-40 To +85

°C

Storage Temperature

-40 To +85

°C

Notes:

1. θ1/2 is the angle from optical centerline where the luminous intensity is 1/2 of the optical peak value.

2. Radiant intensity / luminous Flux: +/-15%.

3. Radiant intensity value is traceable to CIE127-2007 standards.

Notes:

1. Forward Voltage: + / -0.1V.

2. Wavelength value is traceable to CIE127-2007 standards.

3. Excess driving current and / or operating temperature higher than recommended conditions may result in severe light degradation or

premature failure.

Note:

1. 1/10 Duty Cycle, 0.1ms Pulse Width.

2. Relative humidity levels maintained between 40% and 60% in production area are recommended to avoid the build-up of static electricity – Ref

JEDEC/JESD625-A and JEDEC/J-STD-033.