CFA633-RDI-KS datasheet(64/88 Pages) CRYSTAIFONTZ

64 / 88 page

Crystalfontz America, Inc.

Data Sheet Release Date 2012/02/21

www.crystalfontz.com

CFA633-RDI-KS LCD Module (Hardware v2.0 / Firmware s2v1)

February 2012

Page 64

CARE AND HANDLING PRECAUTIONS

For optimum operation of the CFA633-RDI-KS and to prolong its life, please follow the precautions described below.

ESD (ELECTROSTATIC DISCHARGE)

Tx and Rx pins of connector RS-232 only:

+15 kV Human Body Model

+15 kV IEC1000-4-2 Air Discharge

+8 kV IEC1000-4-2 Contact Discharge

The remainder of this circuitry is industry standard CMOS logic and susceptible to ESD damage. Please use indus-

try standard antistatic precautions as you would for any other static sensitive devices such as expansion cards,

motherboards, or integrated circuits. Ground your body, work surfaces, and equipment.

DESIGN AND MOUNTING



The exposed surface of the “glass” is actually a polarizer laminated on top of the glass. To protect the soft plastic

polarizer from damage, the module ships with a protective film over the polarizer. Please peel off the protective

film slowly. Peeling off the protective film abruptly may generate static electricity.



The polarizer is made out of soft plastic and is easily scratched or damaged. When handling the module, avoid

touching the polarizer. Finger oils are difficult to remove.



CFA633-RDI-KS without Crystalfontz overlay: To protect the soft plastic polarizer from damage, place a

transparent plate (for example, acrylic, polycarbonate or glass) in front of the module, leaving a small gap

between the plate and the display surface.



Do not disassemble or modify the module.



Do not modify the six tabs of the metal bezel or make connections to them.



Do not reverse polarity to the power supply connections. Reversing polarity will immediately ruin the module.

AVOID SHOCK, IMPACT, TORQUE, OR TENSION



Do not expose the CFA633-RDI-KS to strong mechanical shock, impact, torque, or tension.



Do not drop, toss, bend, or twist the CFA633-RDI-KS.



Do not place weight or pressure on the CFA633-RDI-KS.



If the LCD panel breaks, be careful to not get the liquid crystal fluid in your mouth or eyes. If the liquid crystal fluid

touches your skin, clothes, or work surface, wash it off immediately using soap and plenty of water.

IF LCD PANEL BREAKS



If the LCD panel breaks, be careful to not get the liquid crystal fluid in your mouth or eyes.



If the liquid crystal fluid touches your skin, clothes, or work surface, wash it off immediately using soap and plenty

of water.

CLEANING



The polarizer (laminated to the glass) is soft plastic. The soft plastic is easily scratched or damaged. Be very

careful when you clean the polarizer.



Do not clean the polarizer with liquids. Do not wipe the polarizer with any type of cloth or swab (for example, Q-

tips).

CFA633-RDI-KS Datasheet(PDF) 64 Page - Crystalfontz America, Inc.

CFA633-RDI-KS Datasheet(HTML) 64 Page - Crystalfontz America, Inc.

Html Pages

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88

Datasheet Download

Link URL