LITE-ON TECHNOLOGY CORPORATION

Property of Lite-On Only

Electrical / Optical Characteristics at Ta=25℃

PARAMETER

SYMBOL

MIN.

TYP.

MAX.

UNIT

TEST CONDITION

Luminous Intensity

Iv

10000

13000

mcd

Note 1,2,3

Iv Spec. Table

Viewing Angle

15

deg

Note 4

x

0.30

Chromaticity Coordinates

y

0.30

Note 5

Hue Spec. Table &

Chromaticity Diagram

Forward Voltage

3.3

3.8

V

Reverse Current

100

μA

NOTE: 1. Luminous intensity is measured with a light sensor and filter combination that approximates the CIE

eye-response curve.

2. The Iv guarantee should be added ±15﹪tolerance.

3. Iv classification code is marked on each packing bag.

5. The chromaticity coordinates (x, y) is derived from the 1931 CIE chromaticity diagram.

6. Precautions in handling:

‧ When soldering, leave 2mm of minimum clearance from the resin to the soldering point.

‧ Dipping the resin to solder must be avoided.

‧ Correcting the soldered position after soldering must be avoided.

‧ In soldering, do not apply any stress to the lead frame particularly when heated.

‧ Lead forming must be done before soldering.

‧ It is necessary to cut the lead frame at normal temperature.

7. Caution in ESD:

Static Electricity and surge damages the LED. It is recommend to use a wrist band or

anti-electrostatic glove when handling the LED. All devices, equipment and machinery

must be properly grounded.

Part No. : LTW-2S3D7

Page :

3

of

8

BNS-OD-C131/A4