High-Speed Response Non-Isolated POL DC-DC Converter

9.5A BSV Series

1

Bellnix

DC-DC Converter

BDD20150226

BSV Series is a small (33×22.5×7mm), 31.35W output power step-down DC-DC

converter. With ultra-low output voltage from 0.8V, it can support the latest FPGA, DSP,

ASIC applications. High efficiency and ultra-high-speed response with synchronous

rectification have been achieved along with space-saving without external parts. This

product will exceed your expectations in all aspects.

･Output Voltage Accuracy ±3.0%

･Amazingly miniaturized

･Ultra-high Efficiency 92%

･Operating Temp Range -40ºC to +85ºC

･Ultra Compact, High Power Density

･High Reliability, High Performance

･Non-isolated type Converter

･Use of the Latest Power-IC

･Built-in Over Current Protection Circuit

･Synchronous rectification

･ON/OFF Control

･RoHS Compliant

･High-speed Response

･Short-circuit, Over Current Protection Circuit

･External Capacitor Not Required

･Adjustable Output Voltage

･Heat Sink Not Required

･DIP, SIP Package

■ Model/Rating

Table 1

Models

BSV Series

Input V

Vdc

Output V

Vdc

Output I

A

Line Reg.

%(typ.)

Load Reg.

%(typ.)

Ripple Noise

mVpp(typ.)

Efficiency

%(typ.)

Package

BSV-3.3S9R5

5.0V

(3.0 to 5.5)

3.3V

(0.8 to 3.3)

0 to 9.5

0.5

0.5

30

92

SIP

BSV-3.3S9R5D

DIP

Note 1: Unless otherwise specified, measured at input voltage 5.0V, output voltage 3.3V, rated output current and ambient temperature

25ºC±5ºC.

Note 2: Efficiency is measured at input voltage 5.0V, output voltage 3.3V, rated output current and ambient temperature 25ºC±5ºC.

Note 3: Potential difference of 0.7V or more is required between input voltage and output voltage. Vin(V)-Vo(V) ≧ 0.7V

Note 4: Ripple noise is measured at 20MHz bandwidth.

Note 5: Depending on the ambient temp. conditions, temperature derating and air flow cooling may be required.

■ Specifications

Table 2

Input voltage range

Refer to Table 1

Rated input voltage

5.0V

Rated output voltage

3.3V

Output voltage initial setting

3.3V (When Trim pin is open)

Adjustable output voltage range

Refer to Table 1

Output voltage accuracy

±3.0% (±0.099V)

Line regulation

Refer to Table 1 (Rated output, input voltage varying in the range of Table 1)

Load regulation

Refer to Table 1 (Rated input/output voltage, load varying from 0 to 100%)

Temp. regulation

±0.02%/ºC typ. (Rated input/output, operating temp varying from -40ºC to +55ºC)

Ripple noise

Refer to Table 1 (Rated input/output, measurement frequency bandwidth 20MHz)

Efficiency

92% typ. (Rated input/output, refer to Table 1)

Turn-on Rise time

1.0ms typ. (Resistance load)

Max. output load capacity

10000µF max.

Over current protection

Yes

Output over voltage protection

None

Remote ON/OFF control

Yes

P-Good output

Yes (Only BSV-3.3S9R5D)

Operating temp range

Operating temperatures -40ºC to +85ºC (Refer to temp derating described separately)

Storage temp range

Storage temperatures -40ºC to +85ºC

Humidity range

20% to 95% R.H. (Max. wet bulb temp 35ºC with no condensation)

Storage conditions

Below 30ºC/60% R.H. before mounting the converter

Cooling conditions

Refer to temp derating shown separately

Vibration

5 to 10Hz total amplitude 10mm (3 directions, 1 hour each), 10 to 55Hz acceleration 2G (3

directions, 1 hour each)

Impact

Acceleration 20G (3 times for each of 3 directions), Impact time 11±5ms

Weight

5g typ.

Outer dimensions

SIP type : W=24.0 L=33.0 H=6.0 (mm) (For dimensional details, refer to the shape and

dimensions shown separately)

DIP type : W=22.25 L=33.0 H=7.0 (mm) (For dimensional details, refer to the shape and

dimensions shown separately)

* The above specifications are provided with rated value, unless otherwise specified.

* The contents provided in this datasheet may be changed at any time without prior notice.