AUIPS6041(G)(R)(S)

www.irf.com

3

Absolute Maximum Ratings

Absolute maximum ratings indicate sustained limits beyond which damage to the device may occur. All voltage parameters

are referenced to Ground lead. Tj= -40°C..150°C, Vcc=6..35V (unless otherwise specified).

Symbol

Parameter

Min.

Max.

Units

Vout

Maximum output voltage

Vcc-35 Vcc+0.3

V

Voffset

Maximum logic ground to load ground offset

Vcc-35 Vcc+0.3

Vin

Maximum input voltage

-0.3

5.5

Vcc max.

Maximum Vcc voltage



36

Vcc cont.

Maximum continuous Vcc voltage



28

Iin max.

Maximum IN current

-3

10

mA

Idg max.

Maximum diagnostic output current

-3

10

Vdg

Maximum diagnostic output voltage

-0.3

5.5

V

Pulse 2a max

Maximum voltage ISO pulse 2a x 500cy (ISO7637)



55

V

Pd

Maximum power dissipation (internally limited by thermal protection)



1.25

W

Rth=100°C/W AUIPS6041G

Rth=50°C/W AUIPS6041R

1”sqrt. footprint



2.5

Tj max.

Max. storage & operating temperature junction temperature

-40

150

°C

Thermal Characteristics

Symbol

Parameter

Typ.

Max.

Units

Rth1

Thermal resistance junction to ambient AUIPS6041G

100



°C/W

Rth1

Thermal resistance junction to ambient AUIPS6041R D-Pak std. footprint

70



Rth2

Thermal resistance junction to ambient AUIPS6041R D-

Pak 1” sqrt.

footprint

50



Rth3

Thermal resistance junction to case AUIPS6041(R)(S)

D-Pak/D2pak/TO220

6



Rth1

Thermal resistance junction to ambient AUIPS6041(S) D2Pak/TO220 std.

footprint

60



Rth2

Thermal resistance junction to ambient AUIPS6041S

D2Pak 1” sqrt.

footprint

40



Recommended Operating Conditions

These values are given for a quick design. For operation outside these conditions, please consult the application notes.

Symbol

Parameter

Min.

Max.

Units

VIH

High level input voltage

4

5.5

VIL

Low level input voltage

0

0.9

Iout

Continuous drain current, Tambient=85°C, Tj=125°C, Vin=5V

A

Rth=100°C/W AUIPS6041G



1.6

Rth=50°C/W AUIPS6041R

1” sqrt. footprint



2.3

Rin

Recommended resistor in series with IN pin

4

10

k



Rdgs

Recommended resistor in series with DG pin for reverse battery protection

4

20

Rdgp

Recommended pull-up resistor for DG

4

20

Rol

Recommended pull-up resistor for open load detection

5

100

F max.

Max. switching frequency



3.5

kHz