FPD200P70 datasheet(2/3 Pages) FILTRONIC

2 / 3 page

PRELIMINARY

FPD200P70

HI-FREQUENCY PACKAGED PHEMT

Phone: +1 408 850-5790

http://www.filtrionic.co.uk/semis

Revised: 7/15/05

Fax: +1 408 850-5766

Email: sales@filcsi.com

•

ABSOLUTE MAXIMUM RATINGS1

Parameter

Symbol

Test Conditions

Min

Max

Units

Drain-Source Voltage

VDS

-3V < VGS < +0V

Gate-Source Voltage

VGS

0V < VDS < +8V

-3

Drain-Source Current

IDS

For VDS > 2V

IDSS

Gate Current

Forward or reverse current

RF Input Power2

Under any acceptable bias state

Channel Operating Temperature

TCH

Under any acceptable bias state

175

ºC

Storage Temperature

TSTG

Non-Operating Storage

-40

150

ºC

Total Power Dissipation

PTOT

See De-Rating Note below

470

Gain Compression

Comp.

Under any bias conditions

Simultaneous Combination of Limits3

2 or more Max. Limits

1TAmbient = 22°C unless otherwise noted

2Max. RF Input Limit must be further limited if input VSWR > 2.5:1

3Users should avoid exceeding 80% of 2 or more Limits simultaneously

Notes:

•

Operating conditions that exceed the Absolute Maximum Ratings will result in permanent damage to the device.

•

Total Power Dissipation defined as: PTOT ≡ (PDC + PIN) – POUT, where:

PDC: DC Bias Power

PIN: RF Input Power

POUT: RF Output Power

•

Total Power Dissipation to be de-rated as follows above 22

°C:

PTOT= 470mW – (3mW/°C) x TPACK

where TPACK = source tab lead temperature above 22°C

(coefficient of de-rating formula is the Thermal Conductivity)

Example: For a 65

°C source lead temperature: PTOT = 470mW – (3 x (65 – 22)) = 341mW

•

HANDLING PRECAUTIONS

To avoid damage to the devices care should be exercised during handling. Proper Electrostatic

Discharge (ESD) precautions should be observed at all stages of storage, handling, assembly, and

testing. These devices should be treated as Class 0 (< 250V) per JESD22-A114-B, Human Body

Model, and Class A (< 200V) per JESD22-A115-A, Machine Model.

•

APPLICATIONS NOTES & DESIGN DATA

Applications Notes are available from your local Filtronic Sales Representative or directly from the

factory. Complete design data, including S-parameters, noise data, and large-signal models are

available on the Filtronic web site. Evaluation Boards available upon request.

FPD200P70 Datasheet(PDF) 2 Page - Filtronic Compound Semiconductors

FPD200P70 Datasheet(HTML) 2 Page - Filtronic Compound Semiconductors

Html Pages

1 2 3

Datasheet Download

Link URL