JS28F256P30T85 datasheet(93/102 Pages) INTEL

93 / 102 page

1-Gbit P30 Family

Datasheet

Intel StrataFlash® Embedded Memory (P30)

April 2005

Order Number: 306666, Revision: 001

Appendix C Common Flash Interface

The Common Flash Interface (CFI) is part of an overall specification for multiple command-set

and control-interface descriptions. This appendix describes the database structure containing the

data returned by a read operation after issuing the CFI Query command (see Section 9.2, “Device

Commands” on page 50). System software can parse this database structure to obtain information

about the flash device, such as block size, density, bus width, and electrical specifications. The

system software will then know which command set(s) to use to properly perform flash writes,

block erases, reads and otherwise control the flash device.

C.1

Query Structure Output

The Query database allows system software to obtain information for controlling the flash device.

This section describes the device’s CFI-compliant interface that allows access to Query data.

Query data are presented on the lowest-order data outputs (DQ7-0) only. The numerical offset value

is the address relative to the maximum bus width supported by the device. On this family of

devices, the Query table device starting address is a 10h, which is a word address for x16 devices.

For a word-wide (x16) device, the first two Query-structure bytes, ASCII “Q” and “R,” appear on

the low byte at word addresses 10h and 11h. This CFI-compliant device outputs 00h data on upper

bytes. The device outputs ASCII “Q” in the low byte (DQ7-0) and 00h in the high byte (DQ15-8).

At Query addresses containing two or more bytes of information, the least significant data byte is

presented at the lower address, and the most significant data byte is presented at the higher address.

In all of the following tables, addresses and data are represented in hexadecimal notation, so the

“h” suffix has been dropped. In addition, since the upper byte of word-wide devices is always

“00h,” the leading “00” has been dropped from the table notation and only the lower byte value is

shown. Any x16 device outputs can be assumed to have 00h on the upper byte in this mode.

Table 32.

Example of Query Structure Output of x16- Devices

Table 31.

Summary of Query Structure Output as a Function of Device and Mode

Device

Hex

Offset

Hex

Code

ASCII

Value

Device Addresses

00010:

“Q”

00011:

“R”

00012:

“Y”

JS28F256P30T85 Datasheet(PDF) 93 Page - Intel Corporation

JS28F256P30T85 Datasheet(HTML) 93 Page - Intel Corporation

Html Pages

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 ...More

Datasheet Download

Link URL