EVK-R5 - User guide

UBX-19042592 - R05

Starting up

Page 8 of 23

C1-Public

1.5 Connectors

Function

Description

Name

Board

9 - 18 V Power Input

Connector for the AC / DC power adapter of EVK

AC: 100-240 V, 0.8 A, 50-60 Hz / DC: +12 V, 2.5 A

IEC 60417-5172

Class II equipment

J400

EVB-WL3

SIM card holder

SIM card holder

J300

EVB-WL3

Cellular USB

(single UART)

Mini USB connector for the cellular module single UART interface (with

default USIO variant 0, or USIO variant 1) converted as a USB interface

J501

EVB-WL3

Cellular RS232

(single UART)

DB9 connector for the cellular module single UART interface (with default

USIO variant 0, or USIO variant 1) converted as an RS232 interface

J500

EVB-WL3

Cellular headset

Audio headset jack connector for the cellular module audio interface

J303

EVB-WL3

GNSS backup battery Backup battery socket for the GNSS module (under GNSS adapter board)

BT200

EVB-WL3

GND

Ground terminals for the probe reference

J402, J403

J405, J406

EVB-WL3

Cellular antenna

SMA connector for the module cellular antenna (ANT)

J106

ADP-R5

GNSS antenna (for

the SARA-R5 module)

SMA connector for the GNSS antenna to be connected to the GNSS RF

J112

ADP-R5

Cellular native USB

Mini USB connector for the cellular module native USB interface

J105

ADP-R5

Cellular USB

(two UARTs)

Mini USB connector for the cellular module two UART interfaces (with

USIO variant 2, 3 or 4 configuration) converted as a USB interface

J201

ADP-R5

DIL B2B headers

Dual-in-line board-to-board connectors for cellular module interfaces

J300, J301 ADP-R5

GNSS antenna (for

the GNSS module)

SMA connector for the GNSS antenna to be connected to the GNSS RF

input of the GNSS module (RF_IN)

J208

ADP-GNSS

GNSS USB

Mini USB connector for the GNSS module USB interface

J102

ADP-GNSS

Table 3: EVK-R5 connector descriptions

THERE IS A RISK OF AN EXPLOSION WHEN CHARGING A FULLY OR PARTIALLY DISCHARGED

BATTERY. REPLACE THE BATTERY WHEN IT NO LONGER HAS A SUFFICIENT CHARGE FOR

UNIT OPERATION. CONTROL THE BATTERY BEFORE USE IF THE DEVICE HAS NOT BEEN USED

FOR AN EXTENDED PERIOD OF TIME.

DISPOSE OF USED BATTERIES ACCORDING TO THE INSTRUCTIONS!