V12

2

Specifications

TRG21 Series De-rating Curve

INPUT SPECIFICATIONS:

Voltage …....………........…........................................... 90~264Vac

Frequency ………………………………………….……………..... 47 to 63Hz

Input Current ……………………………………….……………..... 0.3 to 0.5A

Inrush Current …………….…Cold Start@25℃............. 40A max. @230Vac

Leakage Current …………………………………………………… 0.1mA max.

OUTPUT SPECIFICATIONS:

Voltage Accuracy ..........................................…………............... ±2.0% max.

Line Regulation (note3) ……………….…………...................…. ±1.0% max.

Load Regulation (note4) ………………......……….…….........…...... see table

Hold-up Time …………………………….…………..…… 8ms typ. @115Vac

SAFETY AND EMISSION:

Short Circuit Protection …………….………………………….…… Continuous

CE Directive ……………………………….……… 2004/108/EC, 93/42/EEC

Over Voltage Protection(TVS) …… 115%-140% of nominal output voltage

Emissions … EN60601-1/EN61204-3/EN55022/CISPR Class B, EN55024

GENERAL SPECIFICATIONS:

Safety Approvals …….................. UL60601-1, IEC60601-1, EN60601-1 3

rd

Isolation ………………………………..………… Input to output = 5,656VDC

IEC60950-1,EN60950-1

Efficiency ……………………………………………………………….. see table

NOTE:

Switching Frequency ………………………………….………….. 100KHz typ.

1. Voltage accuracy is set of 60% rated load.

Operating Temperature ............................... -20 ~ 60℃(see derating curve)

2. Add a 0.1uF ceramic capacitor and a 10uF E.L. capacitor to output for

Storage Temperature ……………………………...….......……........ -25~85℃

Ripple & Noise measuring @20MHz BW.

Cooling ………………………………….………………… Natural Convection

3. Line regulation is measured from high line to low line with full load.

Humidity .................................................... 93% RH max. Non condensing

4. Load regulation is measured from 60% to full load and from 60% to

MTBF ……. MIL-STD-217F, GB, at 25℃/115VAC ..……… 400Khrs min.

20% load (60% +/- 40% load).

Dimensions ……….. 3.000x1.780x0.870 inches (76.20x45.20x22.10mm)

Weight …………………………………………………… 140g(0.31Pounds)

Mechanical Specification

Tolerance:Inches:X.XXX±0.02

Millimeters:X.XX±0.5

All Dimensions are in inches(mm)

18AWG / 1220mm

DC Plug :Right Angle(ψ5.5／ψ2.1) L12mm

DC Plug type: V+ ─●)─ V-

0.008[0.20]

IEC320/C8

48.031[1220.00]±1.969[50.00]

3.000[76.20]

Typical at 25˚C, nominal line and 75% load, unless otherwise Specified

0%

20%

40%

60%

80%

100%

-20

-10

0

10

20

30

40

50

60

Ambient Temperature(

20LFM(Natural Convection)