www.seoulsemicon.com

3

Product Data Sheet

Rev1.6, Jan. 2021

S1C0-3030000000-00000000-00003-RGB-LED

Performance Characteristics

Parameter

Color

Symbol

Value

Unit

Min.

Typ.

Max.

Luminous Flux

[1]

Red

Ф

V

[3]

28

31

38

lm

Green

44

48

54

Blue

13

17

22

Dominant Wavelength

[1]

Red

λ

d

615

621

625

nm

Green

520

525

530

Blue

465

470

475

Forward Voltage

[1]

Red

V

F

2.0

2.2

2.5

V

Green

3.05

3.2

3.4

Blue

3.05

3.2

3.4

Thermal Resistance (J to S)

[2]

Red

R

θ

J-S

-

12

-

℃/W

Green

-

50

-

Blue

-

16

-

View Angle

Red

2Θ ½

118

Deg.

Green

115

Blue

113

Table 1. Electro-Optical Characteristics, I

Notes :

(1) Tolerance : V

F

±0.1V,

Ф

V

±7%,

λ

d

±2nm

(2) Thermal resistance : Rth

(3) Ф

V

is the total luminous flux output as measured with an integrating sphere

(4) It is recommended to use it in the condition that the reliability is secured within the max value.

•LED’s properties might be different from suggested values like above and below tables if operation

condition will be exceeded our parameter range. Care is to be taken that power dissipation does not

exceed the absolute maximum rating of the product.

•Thermal resistance can be increased substantially depending on the heat sink design/operating

condition, and the maximum possible driving current will decrease accordingly.

•All measurements were made under the standardized environment of Seoul Semiconductor.

Parameter

Symbol

Value

Unit

Min.

Typ.

Max.

Forward Current

I

F

-

-

180

mA

Junction Temperature

T

j

-

-

125

ºC

Operating Temperature

T

op

- 40

-

105

ºC

Storage Temperature

T

stg

- 40

-

105

ºC

ESD Sensitivity(HBM)

1

-

-

kV

Table 2. Absolute Maximum Ratings