MODEL: 40DR

40DR SPECIFICATIONS

ES-9533 Rev.10 Page 2/6

https://www.m-system.co.jp/

N, kN, Pa, kPa, MPa, t, t/h, ℃, °F, %RH, J,

kJ, MJ, rpm, sec, min, pH, %, ppm, etc.

INPUT SPECIFICATIONS

■ RTD (3-wire)

Maximum leadwire resistance: 10 Ω per wire

Sensing current: Approx. 0.5 mA

Usable range (conformance range):

Pt100 (JIS’97, IEC) -200 to +850℃ or -328 to +1562°F

Pt100 (JIS’89) -200 to +650℃ or -328 to +1202°F

Operational range: -230 to +880℃ or -382 to +1616°F

■ Hold Input: Dry contact input

Detecting level: ≤ 1.5 V

Sensing: Approx. 5 V DC, 1 mA

INSTALLATION

Power consumption

•AC:

Approx. 1.3 VA for 100 – 120 V

Approx. 1.2 VA for 200 – 240 V

•DC: Approx. 0.5 W

Operating temperature: -10 to +55°C (14 to 131°F)

Operating humidity: 30 to 90 %RH (non-condensing)

Mounting: Panel flush mounting

Weight: 160 g (0.35 lb)

PERFORMANCE

Accuracy

-200 – +200°C: ±0.2°C rdg ±1 digit

200 – 850°C: ±0.6°C rdg ±1 digit

-328 – +1562°F: ±1°F rdg ±1 digit

Temp. coefficient: ±0.1 ℃/℃

Line voltage effect: ±1 digit over voltage range

Insulation resistance: ≥ 100 MΩ with 500 V DC

Dielectric strength: 1500 V AC @1 minute (input to power to

ground)

STANDARDS & APPROVALS

EU conformity:

EMC Directive

EMI EN 61000-6-4

EMS EN 61000-6-2

Low Voltage Directive

EN 61010-1

Installation Category II

Pollution Degree 2

Input to power: Reinforced insulation (300 V)

RoHS Directive