EM78P152S datasheet(13/52 Pages) ETC1

13 / 52 page

EM78P152/3S

8-Bit Microcontroller with OTP ROM

Product Specification (V1.8) 09.08.2009

• 9

(This specification is subject to change without further notice)

5.2 Special Function Registers

5.2.1 A (Accumulator)

Internal data transfer operation, or instruction operand holding usually involves the

temporary storage function of the Accumulator, which is not an addressable register.

5.2.2 CONT (Control Register)

Bit 7

Bit 6

Bit 5

Bit 4

Bit 3

Bit 2

Bit 1

Bit 0

/INT

PAB

PSR2

PSR1

PSR0

Bit 7:

Not used

Bit 6 (/INT): Interrupt enable flag

0 : masked by DISI or hardware interrupt

1 : enabled by ENI/RETI instructions

Bit 5 (TS): TCC signal source

0 : internal instruction cycle clock, P62 is a bidirectional I/O pin

1 : transition on TCC pin

Bit 4 (TE): TCC Signal Edge

0 : increment if the transition from low to high takes place on TCC pin

1 : increment if the transition from high to low takes place on TCC pin

Bit 3 (PAB): Prescaler Assigned Bit

0 : TCC

1 : WDT

Bit 2 ~ Bit 0 (PSR2 ~ PSR0) TCC/WDT prescaler bits

PSR2

PSR1

PSR0

TCC Rate

WDT Rate

1:2

1:1

1:4

1:2

1:8

1:4

1:16

1:8

1:32

1:16

1:64

1:32

1:128

1:64

1:256

1:128

The CONT register is both readable and writable.

EM78P152S Datasheet(PDF) 13 Page - List of Unclassifed Manufacturers

EM78P152S Datasheet(HTML) 13 Page - List of Unclassifed Manufacturers

Html Pages

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52

Datasheet Download

Link URL