MODEL: 47LR

47LR SPECIFICATIONS

ES-9503 Rev.12 Page 3/7

https://www.m-system.co.jp/

Dielectric strength: 2000 V AC @ 1 minute (input to DC

output to HH output or H output to L output or LL output to

power to ground)

STANDARDS & APPROVALS

EU conformity:

EMC Directive

EMI EN 61000-6-4

EMS EN 61000-6-2

Low Voltage Directive

EN 61010-1

Measurement Category II (alarm output)

Installation Category II (power)

Pollution degree 2

Input or DC output to alarm output to power: Reinforced

insulation (300 V)

Input to DC output: Basic insulation (300 V)

RoHS Directive

Protection against access to the terminal blocks:

Finger protection (VDE 0660-514)

EXTERNAL VIEW

(4) Max/Min Button

(5) Alarm/

Button

(6) Init/

Button

(7) Shift Button

(8) Up Button

(1) Main Display

(2) Alarm Indicators

(3) Function Indicators

Alarm/

Init/

Max/Min

Shift

Up

Ini

HH

H

P

L

LL

Alm

D/P

Adj

Fnc

Min

Max

• COMPONENT IDENTIFICATION

No.

COMPONENT

FUNCTION

(1)

Main display

Indicates present values, setting values and status of the unit.

(2)

Alarm indicators

Indicate alarm status of the input signal.

(3)

Function indicators

Indicate setting modes and status.

(4)

Max/Min button

Used to switch the main display to show present values, maximum values or minimum values etc.

(5)

Alarm/

button

Used to con rm alarm setting value and to move on to the alarm and other setting modes; or to shift through

setting items in each setting mode.

(6)

Init/

button

Used to move on to the initial and other setting modes; or to shift through setting items in each setting mode.

(7)

Shift button

Used to move on to the setting standby status and shift through display digits in each setting mode.

(8)

Up button

Used to choose setting value in each setting mode.

Note: Refer to the operating manual for details on each function.