MODEL: R6D-YV2

R6D-YV2 SPECIFICATIONS

ES-7781-AF Rev.0 Page 1/3

http://www.m-system.co.jp/

Remote I/O R6 Series

DC VOLTAGE OUTPUT MODULE

(2 points, Euro terminal)

Functions & Features

• 2 channels for DC voltage output, compact size remote I/O

module

• Output range adjustment with DIP switch or PC

configurator

5.9 (.23)

94

(3.70)

102

(4.02)

mm (inch)

MODEL: R6D–YV2[1]

ORDERING INFORMATION

• Code number: R6D-YV2[1]

Specify a code from below for [1].

(e.g. R6D-YV2/Q)

• Specify the specification for option code /Q

(e.g. /C01)

[1] OPTIONS

blank: none

/Q: With options (specify the specification)

SPECIFICATIONS OF OPTION: Q

COATING

/C01: Silicone coating

/C02: Polyurethane coating

RELATED PRODUCTS

• PC configurator software (model: R6CON)

Downloadable at M-System’s web site.

A dedicated cable is required to connect the module to the

PC. Please refer to the internet software download site or

the users manual for the PC configurator for applicable

cable types.

GENERAL SPECIFICATIONS

Connection

Internal bus: Via the Installation Base (model: R6D-BS)

Output: Euro terminal block (torque 0.3 N·m)

mm)

Internal power: Via the Installation Base (model: R6D-BS)

Housing material: Flame-resistant resin (black)

Isolation: Output 1 to output 2 to internal bus or internal

power

Zero adjustments: PC programming

Span adjustments: PC programming

Output range: Selectable with the side DIP SW or PC

programming

Module address: Selectable with DIP and rotary switches on

the side

Output at the loss of communication: Selectable with the

side DIP SW

Configuration mode: With DIP switches on the side panel

Power indicator: Green LED; Refer to the istruction manual

for details.

Status indicator: Bi-color (red/green) LED;

Refer to the instruction manual for details.

OUTPUT SPECIFICATIONS

Overrange output: -11.5 – +11.5 V DC or -15 to +115 %

■ Narrow Span: -1 – +1 V, 0 – 1 V, -0.5 – +0.5 V DC

Load resistance: 10 kΩ min.

■ Wide Span: -10 – +10 V, -5 – +5 V,

0 – 10 V, 0 – 5 V, 1 – 5 V DC

Load resistance: 10 kΩ min.

INSTALLATION

Current consumption: 25 mA

Operating temperature: -10 to +55°C (14 to 131°F)

Operating humidity: 30 to 90 %RH (non-condensing)

Atmosphere: No corrosive gas or heavy dust

Mounting: Installation Base (model: R6D-BS)

Weight: 60 g (2.1 oz)

PERFORMANCE

Conversion accuracy: ±0.1 %

Data range: 0 – 10000 of the output range

Data allocation: 2

Temp. coefficient: ±0.01 %/°C (±0.006 %/°F)

Response time: ≤ 0.25 sec. (0 – 90 %)

Line voltage effect: ±0.1 % over voltage range

Insulation resistance: ≥ 100 MΩ with 500 V DC

Dielectric strength: 1500 V AC @ 1 minute (output 1 to

output 2 to internal bus or internal power to ground)