MODEL: R30YV4

R30YV4 SPECIFICATIONS

ES-9005 Rev.3 Page 1/5

https://www.m-system.co.jp/

Remote I/O R30 Series

DC VOLTAGE OUTPUT MODULE

(4 points, isolated)

Functions & Features

• 4 channels for DC voltage output remote I/O module

• Isolation between output channels

• Output range of each channel is individually adjustable

with PC configurator

25 [.98]

mm [inch]

98

[3.86]

110

[4.33]

MODEL: R30YV4S[1]

ORDERING INFORMATION

• Code number: R30YV4S[1]

Specify a code from below for [1].

(e.g. R30YV4S/Q)

• Specify the specification for option code /Q

(e.g. /C01/SET)

NO. OF CHANNELS

4: 4

COMMUNICATION MODE

S: Single

[1] OPTIONS

blank: none

/Q: With options (specify the specification)

SPECIFICATIONS OF OPTION: Q (multiple selections)

COATING (For the detail, refer to M-System's web site.)

/C01: Silicone coating

/C02: Polyurethane coating

/C03: Rubber coating

EX-FACTORY SETTING

/SET: Preset according to the Ordering Information Sheet

(No. ESU-9005)

RELATED PRODUCTS

• PC configurator software (model: R30CFG)

Downloadable at M-System’s web site.

For connecting to PC, use commercially available Mini-B

type USB cable. (provided by user)

GENERAL SPECIFICATIONS

Connection

Internal bus: Via the Installation Base (model: R30BS)

Output: M3 separable screw terminal (torque 0.5 N·m)

Internal power: Via the Installation Base (model: R30BS)

Solderless terminal: Refer to the drawing at the end of the

section.

Recommended manufacturer: Japan Solderless Terminal

MFG. Co., Ltd., Nichifu Co., Ltd.

(Solderless terminals with insulation sleeve do not fit.)

Screw terminal: Nickel-plated steel

Isolation: Output 1 to output 2 to output 3 to output 4 to

internal bus or internal power

Output range: Selectable with PC configurator software

(model: R30CFG)

Output at the loss of communication: Selectable with PC

configurator software (Model: R30CFG, factory default:

output hold)

Status indicator LED: RUN, ERR

(refer to the instruction manual)

■Recommended solderless terminal size - M3 (unit: mm)

12 max.

3 max.

3.2 dia.

OUTPUT SPECIFICATIONS

Module type: Analog output, 4 points

Output range: -10 - +10V DC (*), -5 - +5V DC, 0 - 10V DC,

0 - 5V DC, 1 - 5V DC

(*) Factory default

Load resistance: ≥ 100 kΩ

Operational range:

Except -10 to +10 V DC: -15 to +115 % of output range

-10 to +10 V DC: Approx. -11.5 to +11.5 V DC

INSTALLATION

Current consumption: 60 mA

Operating temperature: -10 to +55°C (14 to 131°F)

Storage temperature: -20 to +65°C (-4 to +149°F)

Operating humidity: 10 to 90 %RH (non-condensing)