MODEL: R30SV4

R30SV4 SPECIFICATIONS

ES-9001 Rev.3 Page 1/6

https://www.m-system.co.jp/

Remote I/O R30 Series

DC VOLTAGE/CURRENT INPUT MODULE

(4 points, isolated)

Functions & Features

• 4 channels for DC voltage/current input remote I/O

module

• Isolation between input channels

• Input range of each channel is individually adjustable with

PC configurator

25 [.98]

mm [inch]

98

[3.86]

110

[4.33]

MODEL: R30SV4S[1]

ORDERING INFORMATION

• Code number: R30SV4S[1]

Specify a code from below for [1].

(e.g. R30SV4S/Q)

• Specify the specification for option code /Q

(e.g. /C01/SET)

NO. OF CHANNELS

4: 4

COMMUNICATION MODE

S: Single

[1] OPTIONS

blank: none

/Q: With options (specify the specification)

SPECIFICATIONS OF OPTION: Q (multiple selections)

COATING (For the detail, refer to M-System's web site.)

/C01: Silicone coating

/C02: Polyurethane coating

/C03: Rubber coating

EX-FACTORY SETTING

/SET: Preset according to the Ordering Information Sheet

(No. ESU-9001)

CAUTION

■ UNUSED INPUT CHANNELS

Set unused channels to "CH disabled" with PC Configurator

software: R30CFG. When input range is 1 to 5 V DC or 4 to

20 mA DC, input values of the unused channels left open

are to be lower than -15 %, which set a data error at the

PLC or other host devices.

RELATED PRODUCTS

• PC configurator software (model: R30CFG)

Downloadable at M-System’s web site.

For connecting to PC, use commercially available Mini-B

type USB cable. (provided by user)

GENERAL SPECIFICATIONS

Connection

Internal bus: Via the Installation Base (model: R30BS)

Input: M3 separable screw terminal (torque 0.5 N·m)

Internal power: Via the Installation Base (model: R30BS)

Solderless terminal: Refer to the drawing at the end of the

section.

Recommended manufacturer: Japan Solderless Terminal

MFG. Co., Ltd., Nichifu Co., Ltd.

(Solderless terminals with insulation sleeve do not fit.)

Screw terminal: Nickel-plated steel

Isolation: Input 1 to input 2 to input 3 to input 4 to internal

bus or internal power

Input range: Selectable with PC configuration software

(model: R30CFG)

Conversion rate: Selectable with PC configuration software

(model: R30CFG)

Status indicator LED: RUN, ERR

(refer to the instruction manual)

■Recommended solderless terminal size - M3 (unit: mm)

12 max.

3 max.

3.2 dia.