Germany: +49 621 776 1111

Pepperl+Fuchs Group

Refer to "General Notes Relating to Pepperl+Fuchs Product Information".

USA: +1 330 486 0001

Singapore: +65 6779 9091

www.pepperl-fuchs.com

fa-info@us.pepperl-fuchs.com

fa-info@sg.pepperl-fuchs.com

fa-info@de.pepperl-fuchs.com

Triangulation sensor with background evaluation

OBT600-R200-2EP-IO-1T-L

3

To unlock the adjustment functions, rotate the sensing range/sensitivity adjuster by more than 180°.

Sensing Range/Sensitivity

To increase the sensing range/sensitivity, rotate the sensing range/sensitivity adjuster clockwise.

To reduce the sensing range/sensitivity, rotate the sensing range/sensitivity adjuster counter-clockwise.

As soon as the end of the adjustment range is reached, the signal indicator flashes at 8 Hz.

Configuring Light On/Dark On

Press the light-on/dark-on changeover switch for more than 1 second (but less than 4 seconds). "Light on/dark on" mode changes

and the relevant operating indicator lights up.

If you press the light-on/dark-on changeover switch for longer than 4 seconds, the "light on/dark on" mode will switch back to the

original setting. The current status is activated when the light-on/dark-on changeover switch is released.

Restoring Factory Settings

Press the light-on/dark-on changeover switch for more than 10 seconds (but less than 30 seconds) until all LEDs go out. When

the light-on/dark-on changeover switch is released, the signal indicator lights up. After 5 seconds, the sensor resumes operation

with the factory settings.

The adjustment functions are locked after 5 minutes of inactivity. To unlock the adjustment functions, rotate the sensing range/

sensitivity adjuster again by more than 180°.

Housing width

15 mm

Housing height

50.6 mm

Housing depth

41.7 mm

Degree of protection

IP67 / IP69 / IP69K

Connection

2 m fixed cable

Material

Housing

PC (Polycarbonate)

Optical face

PMMA

Mass

approx. 74 g

Cable length

2 m

Approvals and certificates

UL approval

E87056 , cULus Listed , class 2 power supply , type rating 1

CCC approval

CCC approval / marking not required for products rated ≤36 V

FDA approval

IEC 60825-1:2007 Complies with 21 CFR 1040.10 and

1040.11 except for deviations pursuant to Laser Notice No.

50, dated June 24, 2007

Curves/Diagrams

X

Y

Background on white 90 % / object on black 6 %

Background on white 90 % / object on white 90 %

Background on black 6 % / object on black 6 %

Background on black 6 % / object on white 90 %

Object height Y [mm]

Distance to the background X [mm]

Minimum object height (typical)

0

100

200

300

400

500

600

35

30

25

20

15

10

5

0