| Electronic Components Datasheet Search |
|
ML7005MB Datasheet(PDF) 12 Page - OKI electronic componets |
|
|
|||||||||||||||||||||||||||||
ML7005MB Datasheet(HTML) 12 Page - OKI electronic componets |
|
12 / 25 page ![]() ¡ Semiconductor ML7005 12/24 Timing When DTMF is received DTMF Receive Data SP AIN Signal tCYCDT tDETDT tPOSDT tREJDT tBRKDT1 tDELDT tSP tHOLDT tBRKDT2 Figure 3 Timing When DTMF is Received tDETDT : Time to Detect When Time to Detect is the specified value of tDETDT or more, the DTMF signal is normally received. tREJDT : Time to Reject When Time to Reject is the specified value of tREJDT or less, the input signal is ignored and the SP and DTMF receive data are not output. tPOSDT : Interdigit Pause When there is no input signal for the period of tPOSDT or more, the DTMF receive data and SP are reset. Even if the receive data is changed, when Interdigit Pause Time is the value of tPOSDT or less (including the change without Drop Out), SP remains at "0" and the DTMF receive data may maintain its initial value. tBRKDT1 : Acceptable Drop Out Time 1 Acceptable Drop Out Time 1 is applied between when the input signal comes and when SP becomes "0". Even if there is no input signal for the period of tBRKDT1 or less, the SP and DTMF receive data are normally output. tBRKDT2 : Acceptable Drop Out Time 2 Acceptable Drop Out Time 2 is applied when SP is "0" (when receive data is output). Even if there is no input signal during signal reception for the period of tBRKDT2 or less, SP and DTMF receive data are not reset. tCYCDT : Signal Repetition Time Signal Repetition Time should be the specified value of tCYCDT or more so that a signal is normally received. tDELDT : Detect Delay Time The DTMF receive data is output with a delay of the specified value of tDELDT after the input signal appears. tHOLDT : Detect Hold Time The SP and DTMF receive data outputs stop with a delay of the specified value of tHOLDT after the input signal disappears. tSP : SP Delay Time The SP data is output with a delay of the specified value of tSP after the DTMF receive data is output. The DTMF receive data should be latched after detecting the fall of SP. |
|
|
Link URL |
| Does ALLDATASHEET help your business so far? [ DONATE ] |
About Alldatasheet | Advertisement | Contact us | Privacy Policy | Link to Datasheet | Link Exchange | Manufacturer List All Rights Reserved©Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |