GLS53 datasheet(42/109 Pages) EMERSON-NETWORKPOWER

42 / 109 page

GLS200-M Series Specifications

Input

Input range

90-264 Vac; 120-300 Vdc

Frequency

47-63 Hz

Inrush current

50 A max, cold start @ 25°C

Efficiency

86% typical at full load

EMI/RFI

FCC Class B conducted; CISPR 22 Class B conducted;

EN55022 Class B conducted; VDE 0878 PT3 Class B conducted

Power factor

0.99 typical

Safety ground

leakage current

275 μA @ 50/60 Hz, 264 Vac input

Output

Maximum power

125 W for convection; 250 W (200 W for GLS202-M) with 30 CFM forced air

Adjustment range

±10% min. on the main outputs

Fan output

12 V @ 1 A isolated, ±10%

Hold-up time

16 ms @ 250 W load, 120 Vac input

Overload protection

Short circuit protection on all outputs.

Case overload protected @ 110 -160% above peak rating

Overvoltage protection

15% to 50% above nominal output

Logic Control

Power failure

Open collector logic signal goes high 100-500 msec after main output. It goes low at least 6 msec before loss of regulation

Remote sense

Compensates for 0.5 V lead drop minimum, will operate without remote sense connected. Reverse connection protected

Operating temperature

0° to 50°C ambient. Derate each output at 2.5% per degree from 50° to 70°C. -20°C start up

Storage temperature

-40°C to 85°C

Electromagnetic

susceptibility

Designed to meet EN61000-4; -2, -3, -4, -5, -6, -8, -11 Level 3

Humidity

Operating; non-condensing 10% to 95% RH

Vibration

IEC68-2-6 to the levels of IEC721-3-2

MTBF demonstrated

>550,000 hours at full load and 25°C ambient conditions

Mating Connectors

(SK1) AC Input

Molex P/N: 09-50-8031 (connector), PINS: 08-52-0113

AC Ground

Molex: 01-90020001

(SK2) DC

Outputs

Molex 19141-0058/0063/0083; Spade lug based on Cable Ampacity/AWG

(SK3) Control

Signals

Molex 90142-0010 (USA), PINS: 90119-2110 or Amp: 87977-3, PINS: 87309-8

Connector Kit #70-841-020, includes all of the above

1. Specifications subject to change without notice.

2. All dimensions in inches (mm), tolerance is ±0.02”.

3. Specifications are for convection rating at factory settings at 115 Vac input 25°C unless otherwise stated.

4. Mounting holes MH1 and MH2 should be grounded for EMI purposes.

5. Mounting hole MH1 is safety ground connection.

6. This power supply requires mounting on metal standoffs 0.20” (5 m) in height.

7. Warranty: 2 year

8. Weight: 0.75 lb/0.34 kg

Phone: (800) 377-4384

Email: tech@solahd.com

www.solahd.com

Electrical Specifications

Environmental Specifications

GLS53 Datasheet(PDF) 42 Page - Emerson Network Power

GLS53 Datasheet(HTML) 42 Page - Emerson Network Power

Html Pages

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 ...More

Datasheet Download

Link URL