Technical Data

Connection

backplane bus

Interface

manufacturer-specific bus to standard com unit

Analog input

Number of channels

1

Suitable field devices

Field device

pressure converter

Field device [2]

flow converter

Field device [3]

level converter

Field device [4]

Temperature Converter

Field device interface

Connection

2-wire transmitter

Connection [2]

3-wire transmitter

Connection [3]

4-wire transmitter

Connection

2-wire transmitter (HART):

supply circuit: 2/3+, 4/5-

3-wire transmitter (HART):

supply circuit: 2/3+, 6-

measuring circuit: 4/5+, 6-

4-wire transmitter (separately powered):

measuring circuit: 4/5+, 6-

HART measuring circuit: 1+, 6-

Transmitter supply voltage

min. 15 V at 20 mA ; 21.5 V at 4 mA

Input resistance

15 Ω (terminals 5, 6) <P></P> 236 Ω (terminals 1, 6) HART

Line fault detection

can be switched on/off for each channel via configuration tool , configurable via

configuration tool

Short-circuit

factory setting: > 22 mA configurable between 0 ... 26 mA

Open-circuit

factory setting: < 1 mA configurable between 0 ... 26 mA

HART communication

yes

HART secondary variable

yes

Transfer characteristics

Deviation

After calibration

0.1 % of the signal range at 20 °C (68 °F)

Influence of ambient temperature

0.1 %/10 K of the signal range

Resolution

12 Bit (0 ... 26 mA)

Refresh time

100 ms

Indicators/settings

LED indication

Power LED (P) green: supply

Diagnostic LED (I) red: module fault , red flashing: communication error , white: fixed

parameter set (parameters from com unit are ignored) , white flashing: requests

parameters from com unit

Status LED (1) red: line fault (lead breakage or short circuit)

Status LED (2) yellow: Live Zero monitoring

Coding

optional mechanical coding via front socket

Directive conformity

Electromagnetic compatibility

Directive 2014/30/EU

EN 61326-1:2013

Conformity

Electromagnetic compatibility

NE 21:2007

Degree of protection

IEC 60529:2000

Environmental test

EN 60068-2-14:2009

Shock resistance

EN 60068-2-27:2009

Vibration resistance

EN 60068-2-6:2008

Damaging gas

EN 60068-2-42:2003

Relative humidity

EN 60068-2-78:2001

Ambient conditions

Ambient temperature

-20 ... 60 °C (-4 ... 140 °F)

Storage temperature

-25 ... 85 °C (-13 ... 185 °F)

Relative humidity

95 % non-condensing

HART Transmitter Power Supply, Input Isolator

FB3202B2

2

Germany: +49 621 776 2222

Pepperl+Fuchs Group

Refer to "General Notes Relating to Pepperl+Fuchs Product Information".

USA: +1 330 486 0002

Singapore: +65 6779 9091

www.pepperl-fuchs.com

pa-info@us.pepperl-fuchs.com

pa-info@sg.pepperl-fuchs.com

pa-info@de.pepperl-fuchs.com