1

Power entry modules without line filter

CMF1

https://www.schurter.com /PG05

Connectors

IEC Appliance Inlet C8 with Line Switch 1-pole

CMF1

IEC connector C8 with line switch 1-pole

PCB

See below:

Approvals and Compliances

C8

70° C

Description

- Panel mount :

Screw-on mounting on PCB , from top / bottom

- 2 Functions :

Appliance Inlet Protection class II , Line Switch 1-pole

- For PCB mounting

Characteristics

- Easy mounting with center bolt and snapper or srewed on PCB or

housing

- Electrical connection done on the PCB

- Standard CMF with switch on the right side

- With or without rear-side insulation cover

- Suitable for use in equipment according to IEC/UL 62368-1

Other versions on request

- Line switch with other rocker marking

References

Alternative: polarized version or protection class I CMF2; CMF3

Weblinks

pdf data sheet, html datasheet, General Product Information, Approvals,

Distributor-Stock-Check, Accessories, Detailed request for product

Technical Data

Ratings IEC

2.5 A / 250 VAC; 50 Hz

Ratings UL/CSA

2.5 A / 250 VAC; 60 Hz

7A / 125 VAC; 60Hz

Dielectric Strength

> 2.3 kVAC between L-N

> 2.8 kVAC between L/N-PE

(1 min/50 Hz)

Allowable Operation Tempe-

rature

-25 °C to 70 °C

IP-Protection

front side IP40 acc. to IEC 60529

Protection against electric

shock

Suitable for appliances with protection

class II acc. to IEC 61140

Terminal

PCB 1.6 mm

Material: Housing

Thermoplastic, black, UL 94V-0

Appliance inlet/-outlet

C8 acc. to IEC 60320-1,

UL 60320-1, CSA C22.2 no. 60320-1

(for cold conditions) pin-temperature 70

°C, 2.5 A, Protection Class II

Line Switch

Rocker switch 1-pole, non-illuminated,

acc. to IEC 61058-1

Technical Details

Approvals and Compliances

Detailed information on product approvals, code requirements, usage instructions and detailed test conditions can be looked up in Details about

Approvals

SCHURTER products are designed for use in industrial environments. They have approvals from independent testing bodies according to national

and international standards. Products with specific characteristics and requirements such as required in the automotive sector according to IATF

16949, medical technology according to ISO 13485 or in the aerospace industry can be offered exclusively with customer-specific, individual agree-

ments by SCHURTER.