 |
Electronic Components Datasheet Search |
|
|
Electronic Components Datasheet Search |
|
AD9986 Datasheet(PDF) 15 Page - Analog Devices |
|
|
|||||||||||||||||||||||||||||
AD9986 Datasheet(HTML) 15 Page - Analog Devices |
|
|
15 / 37 page  Data Sheet AD9986 SPECIFICATIONS analog.com Rev. 0 | 15 of 37 Table 16. Parameter Min Typ Max Unit fIN = 5400 MHz −76 dBFS fIN = 6300 MHz −71 dBFS fIN = 7200 MHz −70 dBFS TWO-TONE INTERMODULATION DISTORTION (IMD3, 2fIN1 − fIN2 OR 2fIN2 − fIN1 ) AIN1 AND AIN2 = −7 dBFS fIN1 = 1775 MHz, fIN2 = 1825 MHz −84 dBFS fIN1 = 2675 MHz, fIN2 = 2725 MHz −86 dBFS fIN1 = 3575 MHz, fIN2 = 3625 MHz −75 dBFS fIN1 = 5375 MHz, fIN2 = 5425 MHz −67 dBFS ANALOG BANDWIDTH3 8 GHz 1 Noise density is measured at 250 MHz input frequency at −30 dBFS, where timing jitter does not degrade noise floor. 2 Noise figure is based on a nominal full-scale input power of 4.5 dBm with an input span of 1.5 V p-p and RIN = 100 Ω. 3 Analog input bandwidth is the bandwidth of operation in which the full-scale input frequency response rolls off by −3 dB based on a de-embedded model of the ADC extracted from the measured frequency response on the AD9986-FMCB-EBZ. This bandwidth requires optimized matching network to achieve this upper bandwidth. TIMING SPECIFICATIONS For the minimum and maximum values, TJ = −40°C to +120°C and ±5% of nominal supply, unless otherwise noted. Table 17. Parameter Symbol Test Conditions/Comments Min Typ Max Unit SERIAL PORT INTERFACE (SPI) WRITE OPERATION Maximum SCLK Clock Rate fSCLK, 1/tSCLK 33 MHz SCLK Clock High tPWH SCLK = 33 MHz 8 ns SCLK Clock Low tPWL SCLK = 33 MHz 8 ns SDIO to SCLK Setup Time tDS 4 ns SCLK to SDIO Hold Time tDH 4 ns CSB to SCLK Setup Time tS 4 ns CLK to CSB Hold Time tH 4 ns SPI READ OPERATION LSB First Data Format Maximum SCLK Clock Rate fSCLK, 1/tSCLK 33 MHz SCLK Clock High tPWH 8 ns SCLK Clock Low tPWL 8 ns MSB First Data Format Maximum SCLK Clock Rate fSCLK, 1/tSCLK 15 MHz SCLK Clock High tPWH 30 ns SCLK Clock Low tPWL 30 ns SDIO to SCLK Setup Time tDS 4 ns SCLK to SDIO Hold Time tDH 4 ns CSB to SCLK Setup Time tS 4 ns SCLK to SDIO Data Valid Time tDV 20 ns SCLK to SDO Data Valid Time tDV_SDO 20 ns CSB to SDIO Output Valid to High-Z tZ 20 ns CSB to SDO Output Valid to High-Z tZ_SDO 20 ns RESETB Minimum hold time to trigger a device reset 40 ns |
|
Link URL |
| Does ALLDATASHEET help your business so far? [ DONATE ] |
About Alldatasheet | Advertisement | Contact us | Privacy Policy | Link to Datasheet | Link Exchange | Manufacturer List All Rights Reserved©Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |
British ▼
English
Chinese
German
Japanese
Russian
Korean
Spanish
French
Italian
Portuguese
Polish
Vietnamese
Indian
Mexican
British
New Zealand
