76232103 datasheet(11/45 Pages) TOSHIBA

11 / 45 page

Turn off the TV and unplug the power cord.

STOP! Allow the lamp to cool for at least one (1) hour

before replacing it.

On the lamp unit door on the side of the TV, loosen the

screw using a manual screw driver, and then remove

the lamp unit door.

Using a manual screwdriver, loosen the two screws on

the lamp unit.

Grasp the lamp unit handle and gently pull the lamp unit

straight out of the TV. Set the old lamp unit aside.

Carefully insert the new lamp unit straight into the TV

until it is fully seated.

Note :

Never subject the lamp unit to excessive shock.

Never touch the lamp unit glass or otherwise get it

dirty.

Doing so may affect the image quality and reduce

the service life of the lamp. See “Cleaning the lamp

unit glass” below.

Using a manual screwdriver, tighten two lamp unit

screws.

Note:Hand-tighten only. Do not use an electric screw-

driver.

- 11 -

TV back

loosen screw using

manual screwdriver

Lamp unit door detail

Lamp unit screws

Note: Wear so

ft, lint-free

gloves when replacing

the lamp unit.

Lamp unit screws

(use manual screwdriver only)

76232103 Datasheet(PDF) 11 Page - Toshiba Semiconductor