www.nipponpulse.com

For assistance in selecting the best motor for your application, contact Nippon Pulse

to speak with an applications engineer. 1-540-633-1677

Note: Metric units guaranteed. Imperial (United States customary) units are calculated.

THM Option

Wire Type

UL 2464FA

Wire AWG

20

U Phase

Red

V Phase

White

W Phase

Black

Standard Lead Wire

FGA/CE Option - Lead Wire

300mm lead wire bare leads. The

bending radius of the motor cable

should be 36.6mm as suggested

by the wire manufacturer.

300mm lead wire bare leads. The bending

radius of the motor cable should be

18.96mm as suggested by the wire

manufacturer. FG type with insulating

sheet between coils and case. Meets all

requirements of EN60034-1 (1998).

Ground Wire

Wire Type

UL 1330

Wire AWG

20

U Phase

Red

V Phase

White

W Phase

Black

Not all motors on this datasheet have received a CE Declaration of Conformity. Only the standard S250D, S250T and S250Q motors have been certified to CE

standards. The motors and motor options with the following designations have not received a CE Declaration of Conformity, and as such are designated FGA:

S250D-1S, S250T-1S, S250Q-2S, S250Q-1S, any S250 motor with Hall Effects, Thermistor or Thermocouple options.

Receptacle Housing

HLR-03V

Plug Housing

HLP-03V

Retainer

HLS-03V

Pin Contact

SSM-21T-P1.4

Socket Contact

SSF-21T-P1.4

Connector (Motor Cable)

To be installed by the user.

FG/FGA Type Motor Cable

Wire Type

UL 1330

Wire AWG

18

Frame Ground

Green/Yellow

Thermocouple

Thermal sensor

Thermocouple K type (marked each phase name)

Attached to the surface of inside of coil

Length 3000mm