standexelectronics.com

Datasheet

Rev DBA

Page 1

+1 970.879.9900 | sensorsales@standexelectronics.com

S12H-SSTDSO-R5CB2-500

Gear Tooth Speed Switch



Speed Switch



Transistor output-ferrous target activated



Regulated input, NPN with 5k pull-up



Stainless 12x1mm x 52mm housing



Integral 4 pin male 12mm micro connector

Part Description:

S 1 2 H - S ST D SO - R 5 CB 2 - 500

Housing

Sensor Type & Function

Electrical Option

Connection Type

User Defined Frequency

S = Stainless Steel, Thread

Pitch M12x1, 52mm Long

Speed Switch Gear

Tooth & Ferrous Targets

Regulated Input

NPN w/5k Pull up

CB2 = Integral 4 Pin Male

12mm Micro Connector

Switch Frequency

xxx in Hz

‘Steel Gears & Ferrous Target Actuated

Speed Switch with Transistor Output’

Overspeed, Underspeed, Zero-Speed

DESCRIPTION

• Speed switch output turns on/off dependent on factory

programmed frequency.

• 500 Hz switch point indicates if sensor is seeing more or less

than 500 “teeth” per second.

• Single channel digital square wave output for resolving actual

speed.

• Detects gears and other ferrous targets using Hall Effect

Technology

• Capable of detecting 0-32 pitch gears, bolt heads, holes in steel

plates, and other ferrous targets

• No orientation required. Use lock nuts to set air gap within

range of target

FEATURES

• Ferrous Target Speed Switch

• No Orientation Required

• Add –xxx in Hz to End of PN – contact

factory for custom switch

point models

CUSTOMER FOCUSED ENGINEERING + MODULAR DESIGN

HOUSING - Aluminum, stainless steel,

plastic, threaded, flange mount,

customer specific

ELECTRICAL - Every sensor function

available in various electrical options

(NPN, PNP, TTL, etc.)

CONNECTION - Deutsch, Amphenol,

many other brands, free end wires,

pigtails, any length

Need a Custom Sensor Solution?... Send us your application specific requirements at

s e n s or s o. c om

Modify, update, or enhance any sensor with our modular features and functionality.