MPC821 datasheet(72/242 Pages) NXP

72 / 242 page

Support Information

MPC8XXFADS Design Specification—Rev 0.1

PRELIMINARY—SUBJECT TO CHANGE WITHOUT NOTICE

5•1•7

P7 - 12V Power Connector

The 12V power connector - P7, is a two-lead, 2 part, terminal block connector, identical in type to the

5V connector. P7 supplies, when necessary, programming voltage to the Flash SIMM and / or to the

PCMCIA slot.

5•1•8

P8 - Serial Ports’ Expansion Connector

P8 is the serial ports expansion connector. Its is compatibleA with the QUADS board and with the

previous MPC8XXFADS.

P8 is a 96 pin, Female, DIN 41612 connector.

Since the pinout of P8 is specific to the Daughter-Board connected to the FADS, it is described in

each Daughter-Board User’s manual.

5•1•9

PD1, PD2, PD3 & PD4 - Daughter Boards’ Connectors Interconnect Signals

To be described in the next edition of this document.

5•2

MPC8XXFADS Part List

In this section the MPC8XXFADS’s bill of material is listed according to their reference designation.

To be added in the next edition of this document.

A. True for the MPC860, but true upto an extent for other derivatives.

GND

GND line from external power supply.

TABLE 5-7. P7 - Interconnect Signals

Number

Signal Name

Description

12V

12V input from external power supply.

GND

GND line from external power supply.

TABLE 5-6. P6 - Interconnect Signals

Number

Signal Name

Description

Freescale Semiconductor, Inc.

For More Information On This Product,

Go to: www.freescale.com

MPC821 Datasheet(PDF) 72 Page - NXP Semiconductors